dead QTEK S100!!! HELP NEEDED !!! - JAM, MDA Compact, S100 Software Upgrading

I flash my qtek s100 with what i suposed to be the correct rom, but when it finished, it was dead. when i press the power button the vibration starts and nothing more happens. When i plug it with the usb cable to my pc it was the same: the vibrator stars and nothing more happens.
HELP PLEASE !!!!!!!!!!!!!!!!

have u tried soft resetting it again..

Hi.
Thats what i'dd like to do, but as soon as i plug it to my pc with the usb cable the vibration starts and it was not recognized by the pc.

Related

Tablet not starting and usb connect MTP usb device failed !

Hello please help
im on cm rom and it was working all good and smooth suddenly this morning screen turned off and tablet not rebooting since then ..i tried to put on charger and connect thru usb and install drivers gives me MTP USB DEVICE FAILED . i even tried the power button +volume down there's nothing
Device is suddenly dead..any ideas?
edit:
its GT-P5100
press powerbutton 30 seconds or longer, why are you crossposting your problem?

lenovo a850i bricked please help

my laptop doesnot detect any port when i connect my device and i pressed volume up nothing happen please help
lawren91 said:
my laptop doesnot detect any port when i connect my device and i pressed volume up nothing happen please help
Click to expand...
Click to collapse
Hello.
Give us a more details about your phone, like what you have done before, how is it bricked.
Have you tried services?
lawren91 said:
my laptop doesnot detect any port when i connect my device and i pressed volume up nothing happen please help
Click to expand...
Click to collapse
Keep press the vol- or hold the vol- to detect the phone driver to laptop
try this
if u encountered a problem where the led are lightning when u charge without battery and;
there are no light when u charging with battery,
try this;;
when u start the flash tools..
plug in ur cable while holding power sound + and -...
then put the battery and wait ur laptop detect ur phone and flashtools will start flashing your phone..
hope this helps..

Sony Xperia C C2305 Boot Break

Only Red Led Blinks When Connected To USB Or Charging , WHSHUA Tool Also Doesnt Detect The Phone . Please Help I Shown My Phone To Mobile Repair Shop They Told Me You Have Boot Breaked The Phone . Help Me To Solve This ?
please help us
i have the same problem guys and i've tried every possible way in this forum
please let us know what youve done on your phone before this things happen.
you have to force your pc to install your phones driver so wmshua can detect your phone.
try to connect your phone to computer via usb cable without backcover then hold the power and volume down, while holding press reset button of your xperia c, don't release the power and volume just wait to your computer response, if you see installing driver then that's your lucky day if not try it again.
and one last thing you can try to turnoff your phone by holding power/volume+/voume- for couple of seconds, when you successfully turn your phone off try to connect the use cable to the computer first then while connecting to your phone hold power and volume- and wait if your pc install the driver.
hope this may help you guys.

Nexus 5 Hard brick

Have one Nexus 5 with "no command " showing on screen so i tried to flash it with Nexus root toolkit, phone froze and after that its dead and when i try to plug it on comp i just get USB composite device with yellow triangle in device manager. Phone is currently dead , not able to enter download mode, no bootloader mode, not showing anything on charger and not turning on.
Any ideas or suggestions please.
Try to update drivers from device manager if its showing a triangle when u connect ur phone! and install [pda net drivers ..
try this method it worked for me! while connecting to charger not on pc or lappy wall charger press Vol+ and Vol- and power button at the same time and connect it to the charger!!
pranavmali said:
Try to update drivers from device manager if its showing a triangle when u connect ur phone! and install [pda net drivers ..
try this method it worked for me! while connecting to charger not on pc or lappy wall charger press Vol+ and Vol- and power button at the same time and connect it to the charger!!
Click to expand...
Click to collapse
Thanks for the reply but the phone does not turn on no matter how i try to connect it and pda net driver need the phone to has enabled USB debugging which i can not do on a dead phone
Try removing battery from the back just the connector and plug it to ur PC don't attach the battery!

LG L bello bricked,whenever connected to pc just connecting and disconnecting

well yeah i screwed up.i was trying to install a rom for my lg l bello.
in recovery mode i just cleaned the dalvik cache and suddenly my phone goes off.
i tried pressing the power and power+volume button.no responding from the phone:crying:
no lg logo,no vibrating just dead so i connect my phone to the pc and it just connect and dissconnect.first i thought its the pc driver problem.but no.i updated every drivers.also connect to a another pc.still the same problem.then i change the USB Cable:silly: still just connecting and disconnecting from the pc.
plz can someone help me....(sorry for my english.i am not good at english)
promitheus said:
well yeah i screwed up.i was trying to install a rom for my lg l bello.
in recovery mode i just cleaned the dalvik cache and suddenly my phone goes off.
i tried pressing the power and power+volume button.no responding from the phone:crying:
no lg logo,no vibrating just dead so i connect my phone to the pc and it just connect and dissconnect.first i thought its the pc driver problem.but no.i updated every drivers.also connect to a another pc.still the same problem.then i change the USB Cable:silly: still just connecting and disconnecting from the pc.
plz can someone help me....(sorry for my english.i am not good at english)
Click to expand...
Click to collapse
I am in the same situation. I can only enter fastboot mode.

Categories

Resources