Hi there,
I bought a Qtek S200 and I tried to do a ROM upgrade. I followed the instructions given in the website http://kimpeacocke.blogspot.com/2006/06/how-to-perform-rom-upgrade-on-your-i.html
I got the upgrade from this site at ftp://xda:[email protected]_022021_Dopod_PDAMobizEdition_v101.zip
I followed the procedure given in the website given above. After I upgraded successfully the phone has become locked in the boot loader screen. I have done both soft reset and hard reset. Nothing works. The phone gets locked in the boot loader screen. Need help.
Thanks,
Julian
Try to reflash with Qtek ROM instead...
Why you said that it's locked on the Bootloader screen?
Is it frozen or locked?
Hi Rayan,
I tried flashing with the Qtek ROM. I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there. Nothing else happens. I have sent the device back to the guy from whom I bought it.
I got the same problem as Julian - I tried to upgrade with the mentioned ROM and now my device are stucked at the boot screen :?
Some help here ? I'm in same situation
I have an O2 with Dopod rom, after I instaled some software I must to restart and then my O2 are stucked/frozen on Windows Mobile splash screen
Only if I remove the battery I can stop the pda.
I can't do nothing to make him to start. Some ideea ?
:shock:
Later Edit :
solved with http://forum.xda-developers.com/viewtopic.php?t=49298&sid=35f5c1e9e165997b4634ea0c7700ac76
Same issue here with a O2 Xda Neo with German Rom.
Applied the procedure of the prophet wiki : How to CID unlock and Upgrade your Prophet (SPL 2.09 & 2.15)
After step 6 and a soft rest it is stuck in bootloader and will not do anything else, not even off or hard reset...battey has to be removed in order to shut it off....
Any ideas?
Remind me to find the guy who wrote the wiki page on unlocking CID in Prophet......good job pal......
Aaaaarggghhhh %^*^%*^%*^%*
Problem solved..
Hi everyone,
Good news at last. I sent my Qtek S200 to the guy from whom I bought the phone. He fixed it and now I am a happy man. You can check with him if everything else fails. Email him at E gadget Depot ( [email protected]).
All the best..
i tried to upgrade my QTEK S200 with this RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip it got to 95% and then it gives me nbf file cannot work with your PDA. Please help.
I have this problem too, i know only one exit from this situation - i have flash my s200 with RUU_215737_2157135_023021_QTEK_s200_RUS ROM, now it work fine.
you find it her
bootloader issue
I have the same problem too, If anybody know method to fix this problem please help us.
I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there.
THX in advance for you help
Robert
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Please, the links to the solution does not exists anymore.
I need help!!
Qtek S200 stuck in tri-color screen, all flashing so far still does not make it work..
When doing a hard reset I get format failed.
/Jonas
I have same problem!
Anyone can help?
TJSM said:
I have same problem!
Anyone can help?
Click to expand...
Click to collapse
Go to HMA4's upgrade guide or my thread in my signature...
same problem
i have exactly same problem and i couldnt solve it too.So can someone help us?
Please someone explain completely what should we do.
i can not active sync and waiting on the bootloader screen
bacardilima said:
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Click to expand...
Click to collapse
daelee,
you can get normal state, follow the bolded attention at above quote.after entering the 3 colour screen connect USB and you can load the original WM5 ROM on your device. after that, upgrade to any wm6 by the rules and active sync.
the link is dead on that message..
i went to the that page and the link for solution is dead.
http://forum.xda-developers.com/showthread.php?t=376561
find out is there anything that can help!
well.., i own a o2 xda iis(blueangel) that i wanted to upgrade to a better rom instead of my current 6.5 rom.. however, my device seems unable to enter the bootloader by using the file enterbl.exe....well, i cant use the key combination bootloader entering as my power button was broken.... i was told by mr.egzthunder1 at the blueangel thread that mtty could get the device into bootloader but he didnt remember the command...
So, i was asking for anyone here that knew the
command or ANY OTHER WAYS to get my ba into the bootloader,
please help me,..any help is VERY-VERY appreciated.....
Thanks in Advance....
Hey xda,
I rooted my friends phone a couple of days ago and he also wanted me to install a rom on his phone. i downloaded the twrp app and installed it as the app said. the day after, the would not start up and just viewing an error: image signature verify fail. someone with same problem told me i had to unlock the bootloader and the problem would be solved. I unlocked the bootloader with an unlock code and fastboot. but now it doesn't start up either! when i hold the power button it sais ascend and then it turns black. the hardware buttons light up. if i look in fastboot it shows the bootloader is unlocked but I can't acces it. I can only go into the purple screen (download mode?) that blackscreen and i guess fastboot because i can see it if i type 'fastboot devices' in cmd window. I have tried to wipe all data with cmd by typing 'fastboot -w' but it still doesn't start up
I need help now because I don't want to buy my friend a new one. it's a huawei g510-0100.
A reply would be much appreciated.
thanks,
Lars
Hi, thank you fur using XDA Assist. You need to flash the stick firmware on your device. Unfortunately there's very little information about your device so if you don't know how to flash the stock firmware ask here,http://forum.xda-developers.com/showthread.php?t=2257421
Thread closed.
Hello,
i've got a htc one mini. the problem is, it won't start. everytime i start it, it ends up in the bootloader menu.
i can't flash a new rom, because i can't get into recovery. usb-debugging isn't enabled, and i have no opportunity to enable it. the bootloader menu says that the phone is S-ON and the bootloader is locked. i tried to unlock it with htcdev, but fastboot shows errors
i hope someone can help me,
& sorry for my bad english, it isn't my first language.
We are already in 3 who have had this problem...
http://forum.xda-developers.com/htc-one-mini/help/bootloader-t3431549
Hello everyone.
I got the Realme x50 pro(RMX2075) I bought it used from someone and it came with bootloader unlocked, i proceeded to lock the bootloader and now i get this message:
the current image (boot recovery) have been destroyed and can not boot please flash the correct image or contact customer support to fix it..
I cant get into the bootloader mode.. it keeps giving me that message
Ive menaged to conect it to the computer holding volume up and power and pc recognizes something was connected...
from what i see the only way to fix this is using MSM tool.. but it requires a password.
PLEASE HELP, ive no phone right now.,. :/
i beg pls.. someone help me
fixed.,
mikezgen said:
fixed.,
Click to expand...
Click to collapse
Fixed ??? Like you got it to work again ? I have the same exacte issue your having , and ive been trying for a while now
Try this to fix this issue: https://c.realme.com/in/post-details/1271381271037083648
Bootloader should be locked again after this procedere.