Does anyone know how to downgrade the radio rom from 1.05 back to 1.01? we need to know this in case the mini needs to be returned for repair, thanks...
Or do you know how to backup the radio rom of mini? thanks for your help
hchan852 said:
Does anyone know how to downgrade the radio rom from 1.05 back to 1.01? we need to know this in case the mini needs to be returned for repair, thanks...
Or do you know how to backup the radio rom of mini? thanks for your help
Click to expand...
Click to collapse
You can just do like for the upgrade...extract the update files in to a folder, then delet the other to files...leave just the radio.nfb (or sth like it...don`t know the exact name ) and run the update...thats it.
Regards,
Primoz
Hi PC78,
Thanks for your reply, however I don't understand...... here are the files that I have (from the 1.05 update package):
EnterBL.exe
GetDeviceData.exe
MaUpgradeUt.exe
radio_.nbf
RUU.conf
RUU.dll
which files I need to delete or keep? please advise
hchan852 said:
Hi PC78,
Thanks for your reply, however I don't understand...... here are the files that I have (from the 1.05 update package):
EnterBL.exe
GetDeviceData.exe
MaUpgradeUt.exe
radio_.nbf
RUU.conf
RUU.dll
which files I need to delete or keep? please advise
Click to expand...
Click to collapse
No. just download a file "MaUpgradeUt_noID.exe" from this site to the directory where above files are and run it. If flash radio rom to your mini
hchan852 said:
Hi PC78,
Thanks for your reply, however I don't understand...... here are the files that I have (from the 1.05 update package):
EnterBL.exe
GetDeviceData.exe
MaUpgradeUt.exe
radio_.nbf
RUU.conf
RUU.dll
which files I need to delete or keep? please advise
Click to expand...
Click to collapse
This files are just for radio upgrade!...as U can see there is only the radio_.nbf file...the other two files are missing and it`s OK for just radio update. U can do as jykk said...extract the ROM 1.01 version and delet other two nbf files and than put the file "MaUpgradeUt_noID.exe" and run it. That`s it!
Regards,
Primoz
p.s. I have just deleted the other two files and it worked for me without the "MaUpgradeUt_noID.exe". :roll:
I think now the problem is how I can get the 1.01 radio_.nbf ......... are you give me some ideas on how to extract the rom to three nbf files?
hchan852 said:
I think now the problem is how I can get the 1.01 radio_.nbf ......... are you give me some ideas on how to extract the rom to three nbf files?
Click to expand...
Click to collapse
You can get the rom from the xda-ftp...look for shipped roms and find the oldest version. When U get it just click once on the file...and with the right click on the mouse chose to extract the rom in a directory of your choice. The first version of the rom is 1.03...When U have extracted the rom contents just delete the other two nbf files...and procede with upgrade as I described above.
Regards,
Primoz
Related
Hi!
I tried to get rom's files from wm2005 to make .mui files for my national language. I have dumprom.exe tool but now i haven't rom file .nba, or .nb1.
Have any one got it ?
Or does any one know the method to retrive these files. please help me !
thank alot!
thanh_lam said:
Hi!
I tried to get rom's files from wm2005 to make .mui files for my national language. I have dumprom.exe tool but now i haven't rom file .nba, or .nb1.
Have any one got it ?
Or does any one know the method to retrive these files. please help me !
thank alot!
Click to expand...
Click to collapse
you can get them from my dumped files and modules in my server.
http://forum.xda-developers.com/viewtopic.php?p=153019#153019
... I cannot install it on my device due to CID lock.
I have cracked the protection of ACE HELLAS but I don't know how to install it on my device. I tried to upgrade using aWizard, but the device won't boot.
What I have now is an .nba file with the patched ROM.
Please tell me how to install it on a CID locked phone so I can test it, and then I will post the ROM
Credits go to Marker who initially found out how to crack the Greek rom for the universal.
http://forum.xda-developers.com/viewtopic.php?t=46548
Follow the instructions and use the romupdateutility exe from above
gpx said:
http://forum.xda-developers.com/viewtopic.php?t=46548
Follow the instructions and use the romupdateutility exe from above
Click to expand...
Click to collapse
Thanks for your reply, but aku 2 roms only allow you to upgrade. In addition to this, I would have to find a way to convert an .nba file to .nbf .
I anyone has a Qtek device and wan'ts to try my file, don't hesidate to ask. I can upload my .nba on the ftp
Hiho,
I have a Swisscom branded QTEK S200 atm running Dopod, but actually I'd like to install this:
GER_RUU_Prophet_215742_2157131_023021_QTEK.exe
But I get the Vendor ID Error and I didnt find a usefull way to trick it, should it be possible to install the ROM above?
Wheres the right Howto to remove that Vendor ID problem?
MY Qtek:
ROM: 2.15.13.27 WWE
ROM Date: 3/9/06
Radio: 02.19.21
Protocol: 4.1.23.09
ExtROM: 2.15.13.121
What is that with those G3 G4 chips, how do I find it out?
What else do you have to know to help me installing the ROM above?
How can I edit the registry, can I just connect with my regedit.exe on my computer to my qtek?
TIA!
Check the files on the ftp, i think there is a Update-Program that doesnt check the vendor ID.
And please upload the Rom
Edit:
http://forum.xda-developers.com/showthread.php?t=264509&highlight=vendor
http://forum.xda-developers.com/showthread.php?t=273114&highlight=vendor
Acutally I think I understand something wrong :-\
I want to upgrade my Qtek to the version I posted in that thread. But I get the error with the Vendor ID, mhh, ok.
The links u gave point to another ROM.
Erm, isnt that easy to understand...
Of course I'll upload as soon I get permission in the upload folder :\
As far as i understand the previous threads:
-Download the mentioned Rom with the NoVendorID Update Utility.
- then take your Rom you want to flash on your unit
- Proceed as described in the threads
Check www.phm.lu for a Registry editor on your device
You could upload to www.rapidshare.de ,then i would also try to upload to the ftp
Uploading it to radpidshare right now, will post link when done.
Mhh, so I downloaded that noVendor ID.
do I have to replace that nk.nbf? (extract it somehow from the exe installer I have?) or do I have to flash it twice?
1) with the noVendor rom
2) with my Qtek rom
sorry, i'm confused )
I would say (though i haven't done that before as i was also searching for the right rom) Unzip the novendorid rom and replace the .nbf file with the german qtek file.
At least worth a try
Mhh, there is the ROM:
http://rapidshare.de/files/34895878/GER_RUU_Prophet_215742_2157131_023021_QTEK.exe.html
Mhh, I'm wondering how to extract the .exe to get the *.nbf
Mhh....
If you have/want addme to msn: [email protected]
=)
Open the File with Winrar. You should be able to extract the files.
I do not use msn, sorry
BTW: Thank you for the ROM !
rom
ftp://xda:[email protected]_RUU_Prophet_215742_2157131_023021_QTEK.exe
the rom was already uploaded.
I know
It is the Rom Purp uploaded to rapidshare before.
I have downloaded the smart wm6 ROM for HTC Prophet. I intend to extract files from the rom. I have used prepare_imgfs to split the rom, and this was successful. I then tried to dump the imgfs_raw_data.bin file. I received one or two errors (¨unknown header type, FS_DATA_TABLE?¨). On entering the dump directory, it contains a load of *.dsm files and one *.dll (acmdwrap.dll). I am going about this correctly? How can I dump this rom to extract more files?
http://forum.xda-developers.com/showthread.php?t=297496
try this
have tried it, it only extracts .nbf files not .nba. It comes up with an error when I try.
iamthebug said:
have tried it, it only extracts .nbf files not .nba. It comes up with an error when I try.
Click to expand...
Click to collapse
Install Molski Pack v 1.1
and read its readme first.
Every thing is automated
no need to manually do
except minor editing and
addition/deletion of files/packages
if u know about them.
try and then discuss it here
thanx
nandlal
nandlal_mk said:
Install Molski Pack v 1.1
and read its readme first.
sorry error
Click to expand...
Click to collapse
hey folks,
Does anyone know if anyone has extracted the radio from the latest Cingular 2125 (Faraday) ROM (version 2.0.13.0, from the HTCamerica website)?
I like the qtek 2.0.9.0 ROM, but I am running on Cingular network, and it would be nice to try that radio version. I'd rather not use the ROM, because I'd have to fool with it to reactivate wifi and a whole lot of other modifications.
thanks!
Do you have the download address? Please show me the address, I can extract the radio for you.
wow! thank you very much, here is the link...
http://www.america.htc.com/support/2125/software-downloads.html
good luck, and thanks again!
bluehanson said:
Do you have the download address? Please show me the address, I can extract the radio for you.
Click to expand...
Click to collapse
can you post the instructions please? It can be helpfull for others.
instructions...
Hey,
in a previous post/different thread, sp3dev posted the following instructions to extract the radio ROM from a full update, and reinsert the file into an updating package to install...I have never done anything of this nature, but I have used extracted ROMs to update a smartphone. The tools are all posted on xda-developers, and spv-developers, but I am just not sure how to use any of them.
Instructions:
so, goto spv-developers, find info how to setup perl and typhoonnbfdecode.pl. then, unpack the update with winrar, open nk.nbf with typhoonnbftools 0.4, select gsm, select extract decrypted, then save as gsm.n_d
then, use
typhoonnbfdecode.pl -r gsm=gsm.n_d -t -c radio.nbf. then, open radio.nbf with nbf tools and remove cdl___02 and save nbf into the folder with romupdate.exe enterbootloader.exe ruugetinfo.exe ruuresource.dll. run romupdate.exe and flash.
and i advise you to set supercid.
Here are more instructions for setting up perl and typhoonnbfdecode:
http://wiki.xda-developers.com/index.php?pagename=RomTools/typhoonnbfdecode.pl
Can you post the extracted radio rom Plz...
hardcore technie help needed
hey, ok I got the tools working. I have extracted radio roms from a couple of old qtek ROM updates. however, I am having problems with the cingular 2.0.13.0 ROM. I can extract the GSM component using typhoonnbftools, when I try to convert using typhoonnbfdecode.pl, the resulting file is empty. Any ideas?
Sorry I cant give you an answer to your question but I take advantage of your post to ask you one:
when I try to run the Perl script, it gives me runtime error when it tries to load the DES dll:
"R6034 An application has made an attempt to load the C runtime library incorrectily"
Did you had any similar problems to run the tool ?
Hello,
I did get a similar error, though I can't remember the exact syntax. If you are using Activeperl, add the following PPM repository, and install all the packages there. I think that should clear up this particular error...
http://www.soulcage.net/ppds/ppds.58/
I don't know, though...maybe this repository is bad? I have absolutely no experience with perl or programming, so I don't know how to tell. It might be worth trying to find a different repository with the crypt/des package?
Thanks. The repo link solved my problem !
dragonii said:
Thanks. The repo link solved my problem !
Click to expand...
Click to collapse
Hey, were you able to create a radio.nbf from the cingular ROM? Even after isntalling those perl packages, the resulting radio.nbf file was empty . If you've got it, would you mind please posting it?
Hello All,
Please post the radio rom if any one has extracted... Thanks...