I can't seem to send emails from my XDA II. I have a wanadoo email account and have the correct smtp settings etc. Can receive but not send. Having the same problem with SMS.
Previously it worked fine with a tiscali account, although I fell out with them as they are useless. Just can't seem to set up the wanadoo account and get it working.
Any help much appreciated.
Thanks
David
When sending mails through O2 GPRS you must use the O2 SMTP server in your mail settings, not the Wanadoo mail server.
The O2 server address for SMTP is smtp.o2.co.uk
Hope this helps.
Thanks for your help. Seems to have sorted it.
David
Related
Help, I have checked email my settings 100 times and they are correct. I have no problems receiving emails, however I am only able to send/fwd emails 20% of the time. The emails that don’t send/fwd come back "invalid email recipient." Anyone have any suggestions?
Thanks in advance
JA
I used to have that with my XDA2 on Orange.
The smtp server for any ISP account be set to smtp.orange.net, if you have Orange connection or the appropriate smtp server of your mobile phone company. That should solve the problem
The other problems I still face are
a. A document to be sent which was only 60k in the File explorer, shows up in the Outbox as 200k. I don't know why does it happen
b. because the volume becomes so high, the GPRS internet takes a long time and sometimes hangs up
I used to have that with my XDA2 on Orange.
The smtp server for any ISP account be set to smtp.orange.net, if you have Orange connection or the appropriate smtp server of your mobile phone company. That should solve the problem
The other problems I still face are
a. A document to be sent which was only 60k in the File explorer, shows up in the Outbox as 200k. I don't know why does it happen
b. because the volume becomes so high, the GPRS internet takes a long time and sometimes hangs up
i have the same problem with sending mails but then both my
pop3 server and smtp are the servers for my cable isp not my
grps isp
so i doubt that my grps isp is going to be much help in solving that issue
heck they may even block smtp action out of their gateway
Wov...i have the some problem....
:shock: ...new global smtp virus? :roll:
but like many others my cable isp have www mail access so if i want to send a mail from my xda2 i can always do it from explore
not as clean and pretty as to do it with the real smtp though
I tested nPOP program. All is correct, no problemo. It is a cool software, maybe better than Outlook. Outlook - problem :evil: , nPOP - no problemo Sorry i dont speak english. Test it. http://www.npopsupport.fsworld.co.uk/nPOP_PPC2002_ARM.zip
Jarvis Anderson said:
Help, I have checked email my settings 100 times and they are correct. I have no problems receiving emails, however I am only able to send/fwd emails 20% of the time. The emails that don’t send/fwd come back "invalid email recipient." Anyone have any suggestions?
Thanks in advance
JA
Click to expand...
Click to collapse
Who is your Wireless carrier (T-Mobile, AT&T ect...)
Hi all,
I use GPRS but my service provider doesn't provide email service so I have pop mail accounts in different provider. Generally I can receive pop mails from my Atom but I can't send mails since not matching SMTP address. I checked with my email service provider and asked me to get the SMTP of GPRS provider but this provider doesn't provide me SMTP address. In this case, how can I directly send/receive mails directly mails using pop mail service from my Atom?
no pop3 is ONLY! for recieving
joyson said:
Hi all,
I use GPRS but my service provider doesn't provide email service so I have pop mail accounts in different provider. Generally I can receive pop mails from my Atom but I can't send mails since not matching SMTP address. I checked with my email service provider and asked me to get the SMTP of GPRS provider but this provider doesn't provide me SMTP address. In this case, how can I directly send/receive mails directly mails using pop mail service from my Atom?
Click to expand...
Click to collapse
http://mail.google.com/support/bin/answer.py?ctx=gmail&hl=en&answer=10350
google uses diff setting fr standard pop email provider i.e. port 465. try this link to learn the setting. if still cant, posiibly ur svc provider blocks it.
I set up my Yahoo mail as Imap and ATT mail as POP3, both receive fine but can not send, does anyone have the same problem or know how to fix it.
Thanks
Double check your outgoing server settings (authorization or not etc.). You should get help on your email providers websites (how to configure, step by step).
some mobile providers may block certain outgoing servers require and you may have to route emails via your mobile provider outgoing server.
or you can try using gmail's outgoing server assuming you have a gmail address (I think I have tried this once and it's worked).
Hey, I just got the fuze and setup my gmail. I can receive, but can't send. Whey it tried to send I get the message "The messag(s) could not be sent. Check that you have the network coverage and that yhour account information is correct. Then try resending".
I did verify my account info was correct and I double checked the gmail settings. Also I thought maybe the proxy was active so I did run the disable proxy.
Anyone else have this issue?
piggity said:
Hey, I just got the fuze and setup my gmail. I can receive, but can't send. Whey it tried to send I get the message "The messag(s) could not be sent. Check that you have the network coverage and that yhour account information is correct. Then try resending".
I did verify my account info was correct and I double checked the gmail settings. Also I thought maybe the proxy was active so I did run the disable proxy.
Anyone else have this issue?
Click to expand...
Click to collapse
If you have AT&T set your SMTP to: CWMX.COM
This is a known, and now fixed Microsoft problem with WM 6.1 Here is the link to the download on the Microsoft site.
http://www.microsoft.com/downloads/...d2dd-44f2-86e5-1e53aad7fb7a&displaylang=en&tm
Hope this helps,
Brian
I got the same error trying to send an email to Gmail IMAP server over a 3G connection. Does the WinMo 6.1 problem/fix apply to Gmail IMAP the same as it does to POP3 accounts?
Sure does.
Brian
Thanks for the verification, Brian. I applied the fix, and Gmail IMAP is working as it should.
Rick
This forum is a treasure...
Confirmation - It Works
This resolved the GMail outbound email issue for me as well.
Thanks to all of you who help others around here!
Okay, so I'm having this problem as well. I installed the Microsoft update, but like ... it's still not working.
I recently switched from a Tytn II/Tilt and Touch Pro/Fuze. I had email working on my Tilt, but it won't let me send on the Fuze. I am 100% sure all the settings are correct, and like I said, the update is installed. Aside from the proxy server thing, I have no ideas of how to fix this. But I don't know how the proxy server thing works.
MutatedSpleen said:
Okay, so I'm having this problem as well. I installed the Microsoft update, but like ... it's still not working.
I recently switched from a Tytn II/Tilt and Touch Pro/Fuze. I had email working on my Tilt, but it won't let me send on the Fuze. I am 100% sure all the settings are correct, and like I said, the update is installed. Aside from the proxy server thing, I have no ideas of how to fix this. But I don't know how the proxy server thing works.
Click to expand...
Click to collapse
What provider do you have, what account are you trying to set up, what ROM are you on, etc, etc, etc.....
I hope you weren't expecting someone to answer your vague question...
Yes, you mentioned Tilt and Fuze which tells me that your on AT&T but you really haven't provided enough info to assist you.
For your proxy, go to Start\Settings\Connection\Connections\Manage Existing Connections\Proxy Settings and check "TAhis network connects to the internet" uncheck "this network uses a proxy" and clear out any proxy listed.
Also go to Advanced\Select Networks and set both to MediaNet.
Depending on WHAT e-mail your trying to set up, check your settings for the outgoing server.
For example default settings for Yahoo put in smtp.mobile.mail.yahoo.com but I have to remove .mobile to get it to send.
Fuze and gmail
I have pop enabled for gmail--do I need imap instead?
I can't seem to connect--it rejects my password.
Hotmail works.
Pop3 through Lunarpages server works fine.
I can access my gmail just fine on my desktop computer.
oopsss, it decided to start working..didn't do anything different, not even reboot. persistence pays..
Fuze--change default email account?
How do I change my default email account?
I have several apps that send email to the default email set in Windows, and they all end up in the Outlook E-mail account Outbox, which is the Exchange one, and I don't use it.
Can't delete or change it. AT&T support was clueless.
Hello,
I'm having some troubles understanding how email process in WM6.
I have a POP3 account for business mail, and i access it from 3 different places (Work, Home and PDA). All three work fine and without problems, but not sync'd.
I noticed that everytime i send an email at work, it will not be seen in PDA neither at home. If i send the email at home, it won't be seen at PDA neither at work.
I was exploring the WM6 sync stuff and i got confused....
I managed to sync the mail using Windows Mobile Device Center and all mail from PC was sync'd with the PDA, but i noticed also that if i try to send an email from PDA, it won't get out of the outbox until i connect my USB cable to the PC (stupid thing).
Is there any way of having my email sync'd?
Maybe some IMAP account or something else? I think it won't be possible with a standard POP3 account.
Thank you for any help.
You're right, IMAP is the only protocol that syncs mail.
You could try forwarding all your POP3 mail to a GMail account and then set GMail to send mail using your POP3 email.