I am Thinking of purchasing a dual ghost sim, (below picture)
I cant see any space under the battery and unit, so chopping up simcards seems to be the only option,
Anybody know which one works best? :roll:
Thanks in advance ..........
ouch!
I dont want to chop up my SIMs there had to be a better way (btw when will mobiles have dual SIM as an option ? )
Related
I mean this one....
http://www.2-phones-in-1.com/english/products/universal_digital_dual_sim_II_us.htm
Id like to try this software on my dual sim, just because I can
if so, PM me
I would suggest you send your sims to them to be cut by their machine, I destroyed 2 sims. Other people have reported success, it says on instructions that the metal on sim should not be cut, on many sims there is no chance of it fitting without cutting the metal tabs. I threw mine in the bin, that doesnt mean its no good though.
mine worked fine, cutting went perfect
Yeah, I've used a cut up dual sim with a UK 02-uk Contract and orange PAYG sims. Some people said the O2 doesn't work: I had no trouble.
I very much hope you're note paying 37 euro for it: I got mine for £1.75 from ebay:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=6415916094&ssPageName=STRK:MEWN:IT
However, note that the STK menu is something special: it's a menu that gets loaded up when you load a program called "sim toolkit" built into most phones. Then you can choose your line. The one I bought doesn't have this, you go to flight mode on, flight mode off and it'll switch lines.
Cutting the sims requires a careful hand. Get them cut by machine if you can (the guy i got them from will cut them) but you get templates that you should follow carefully with fine scissors and you shouldn't go wrong.
The instructions say that you DO cut the metal tabs on the SIM, there's no other way, but that does not damage to the sim itself. But be careful, practice and try them one by one - you have something called a "Resume card" that is basically a holder for one of the tiny mini-sims. Try this with each cut sim individually to ensure they work, before putting them in the metal tray. I used a nokia to test.
Don't forget to REMOVE THE PLASTIC TEMPLATE. Jeez, this was so obvious but once you've nervously cut the sim up, you'll forget the transparent guide sticker is still on them. Remove this obviously!
In the Magician it took a lot of messing about to get the phone to recognise both sims, because I think there's not much pressure on the back of the sim in the phone's holder. I stuck a little bit of paper down the back of the metal slide to apply some pressure.
It does work, just persevere!
Vijay
PS I read via google that the STK software drains battery faster. I'm sure it wouldn't, but one review said it did? It's not much more effort.
PPS Don't use a sim copier if you're in the UK (eg 16 in 1). It'll destroy your SIMs, they're not compatible here.
Hi all hope to have my Raphael next week sometime.
I have been looking at the specs and user manual and have a question
Is it possible to store a second Micro SD card ontop of the sim card under the battery cover?
If you have a Touch Pro and can confirm this for me I would be thankful.
As per image there seems to be some space on top of the SIM card
Thanks
Jules
i just checked, and i cant find any space big enough to fit the card .
The space u describe is just a little too small, so the card does not fit and the cover can not be put back on
you beat me to it.
Indeed, once the cover is on, the space inside is so tight tabove the sim that it would not fit.
There's also not enough space anywhere else inside as it is all pretty snug....!
sorry to dissapoint you ... i checked every space under the cover and the only place it would fit is indeed on top of the sim but there is a millimeter short on space. i dont know if it would hurt to cut a little piece out of the battery or the microsd card or both .. i wouldnt try it.. also there is no room for it between the keyboard..
There is room...
On my touch pro i keep two spare SIM cards on top of the battery, under the cover. I just align them slightly below the camera hole, and the cover goes on fine...
as microsd is smaller than sim, i reckon u could get 3 of them in there
g
ripnetuk said:
On my touch pro i keep two spare SIM cards on top of the battery, under the cover. I just align them slightly below the camera hole, and the cover goes on fine...
as microsd is smaller than sim, i reckon u could get 3 of them in there
g
Click to expand...
Click to collapse
Yep, micro sd card fits on the battery under the cover
If that's the case, I wonder if a dual-sim simore adapter will fit (the type-2, that doesn't involve cutting your sim cards).
Thanks for all the effort guys,
Nice to know I can store a second sd card if needed
Jules
Just replaced my sim card slot after killing it with a sim card adapter.
That got me thinking. Would be awfully nice to be able to replace the regular sim card reader with a nano version instead of the default micro version.
Haven't seen one anywhere and I doubt that they exist but.. I figured I'd check and see if anyone's ever seen one?
Since my main phone (Nexus 6) and most newer phones use nano sims it would be nice to not have to fiddle with adapters (and risk ruining the reader again..).
Sims now come pre-cut in all 3 sizes. You just pop out the size you need.
Doing modifications to the phone is bound to cause more trouble. How did you even manage to break the sim slot?
GDReaper said:
Sims now come pre-cut in all 3 sizes. You just pop out the size you need.
Doing modifications to the phone is bound to cause more trouble. How did you even manage to break the sim slot?
Click to expand...
Click to collapse
Sure, but that doesn't really help if you want to switch between phones alot.
After I broke mine I checked around and apparently it's quite common. The small springs in the card reader gets stuck in the tiny gaps in between the sim and the adapter.
Here's some examples for instance: http://www.androidcentral.com/warning-using-sim-adapter-incorrectly-brings-down-world-hate
The replacement reader was dirt cheap and really easy to replace so that wasn't a problem really.
Some days I just feel like using a smaller phone while others I prefer my bigger Nexus. It'd be nice to just be able to move the sim without having to use an adapter.
Doubt we will ever see a nano sim reader on a phone that has been discontinued by many carriers.
audit13 said:
Doubt we will ever see a nano sim reader on a phone that has been discontinued by many carriers.
Click to expand...
Click to collapse
You're probably right. It would've been nice if some third party were to make one.
Hi everyone,
I love my Note Edge 915A so much I got another one, when the screen started flaking out: Half my screen goes greenish - have read its a microfracture that will only get worse.
So I went looking for another phone and decided I dont like current offerings (I use the SD card and IR blaster a LOT), so I'll get the same for the time being, and ended got a 915F from ebay. Internet said it would work with AT&T. It doesn't look like it does. Questions I need help with:
- SIM card (taken from the 915A I have ) says "Invalid SIM Card". I've re-seated and sung sweet songs to it. Doesn't want to take.
- Read that 4G/LTE wont work on the 915F, maybe never? Have we found a solution to this yet?
- I've never flashed the 915A, but can install a custom ROM for the 915F to get 4G/LTE to work on AT&T?
Bottom line is, I would like some feedback on if I should just return it and look for an used 915A? I liked this one because it was new in box, but...
Thank you!
My friend, i have three solution for you, sens it seem your simm card is dedicated only for the A phone model simmlock.
1. Go to at&t shop to make the simm card for your new phone, they might ask for your phone perhaps to simmlock??
2. Flashing at&t room on new phone could be danger if it's different hardware chipsets, you are in your own!!!
3. Changing hardware board from A model in to F model it should work, that means you have everything in your phone you had before, just be careful you dont desttoy anything during removal of the board, use plastic gloves for any static demage might happen.
Hello, I have a Moto Edge 30 XT2203-1 and only have single sim. Is there a way to force dual sim like in this post?
[GUIDE] to enable DualSim on SingleSim Moto Z by xequtor
###Disclaimer### I am not responsible if your phone will be damaged, broken, boot looping. YOU are choosing to make these modifications and accept the fact that something might go wrong. Thanks -=MoRpH=- for Moto Z Play guide you will need to...
forum.xda-developers.com
Thanks
the Edge 30 has a dual sim slot, i think you just missed how it works. It's a double sided SIM tray.. you stick the SIM cards on top and bottom. It's still a very thin tray so it's easy to miss this capability
@navi7512
mxz55 said:
the Edge 30 has a dual sim slot, i think you just missed how it works. It's a double sided SIM tray.. you stick the SIM cards on top and bottom. It's still a very thin tray so it's easy to miss this capability
@navi7512
Click to expand...
Click to collapse
Hi, i found that. However, the software in my phone is not enabled for dual sim.
I'm looking for the exact same thing. Maybe is a motorola manufacturing thing, a specific model of the motorolas, both, moto Z and moto z2 play used to have variants, specifically, I had the MX variant of the MZ2 Play, that was the exact hardware that the brazil variant was, long story short, I was able throug a guide to unlock the second sim (slot with plastic) that she software blocked, the same that the Brazil variant had unlocked out of the box.
I have been looking around, it hasnt been done on the Edge 30, but if we could find the original source of the tutorial of the other two models maybe a really good mod maker (fun name for a master hacker), could make a ooerative guide to achieve the same thing on this model.
In my research I've found two things: 1. my model XT 2203-1 is the exact one that the double sim has.
2. The single sim model (my phone) has the terminals inside the phone for the second sim and also, the sim tray is totally the same, besides that blocking plastic on the back.
If someome wants to, I'm up for a research, or even some tests. I've also read that flashing the dual sim rom, or rooting and changing a couple settings used to do the trick on the original moto z model.