Database Info

GetDeviceData output from a S100 wanted

Dear fellows,
I am still at a dead point (my S100 is screwed and the OS is gone!)
I have seen several methods listed here to reflash the OS but most of them require the GetDeviceData output file to modify the original ROMs. Unfortunately I can't run anything on my PDA... It would be a great help if a kind S100 owner would run the GetDeviceData on his handset and post the output file for me. Do not worry, it doesn't hold any sensitive data. Just device model details. Any S100 device, any language... would suffice.
Thanks in advance for your help.
Silver.

...at least the Operator for QTEK...
C'mon guys... help me.

Here ya go...
Operator ID: DANGA001
Qtek S100 bought at Dangaard Norway.

Thanks...
...but it doesn't seem to work. Maybe an Italian PDA would be required.
I am afraid I have to send the PDA back to the service...

Maybe you can try the following:
- Set your Qtek in Bootloader mode
- Connect it to your pc
- Start the update program of the Qtek ROM 1.06
- The installer will not find any version of your current ROM because it is in bootloader mode, but it will allow to update it
- flashing...
- done
Hopefully it'll work for you.
And I will test it further, but this looks like the way to update the ROM without editing the ROM files...

The other alternative that worked for me:
I have a Dopod 818 ROM which I screwed up. I can't therefore read its country code with GetDeviceData.
I used the following to flash the i-mate ROM:
http://www.clubimate.com/Support/ma_cdlsku1_wwe_10300_143_10100_ship.exe
Then I upgraded with qtek 1.06 successfully.

Need help how to reflashing my MDAc from WWE to GER.*thx*

I bough my MDAc some days ago and the first I read was the bad accoustic ... but some Google searches told me that there´ll be a firmware update from T-Mobile with the Cebit2005 also having a link for the download section. Cause there was nothing to download I decided to use the firmware beeing offered here. I did the following:
1.) Downloading a actual MDAc firmware (WWE version)
2.) Downloading the country-free hacked MaUpgradeUt.exe
3.) Flashing the device
Everything worked fine but cause my device had an english (WWE) menu I decided to find out how to solv this language problem and found the thread "How to upgrade with the latest I-mate Jam ROM --GUIDE--" (http://forum.xda-developers.com/viewtopic.php?t=14973). I understood the process but I still wasn´t able to upgrade cause of the following reason:
1.) I downloaded the new firmeware as WWE version
2.) I went through the hacking process
3.) I tried to flash the MDAc with this firmware
RESULT: The "MaUpgradeUt.exe" told me that the firmware isn´t made for my device (country error)
So I decided to use the hacked MaUpgradeUt.exe which worked but brought me anohter problem. When I startet this file it analysed my device and (normally!) listed me the actual and the new firmware version ... but these fields left empty. When I proceeded the next window told me that I successfully flashed my device ... but the device never received any data during this one second from on to the final window.
So ... flashing with the original MaUpgradeUt.exe is impossible while trying to change the language from WWE to GER ... and the hacked MaUpgradeUt.exe has a problem flashing the device.
Does anyone has an idea how to solve this mess and/or another idea how to change the language later and/or is there a application which offers this (i.e. any mobile phone does it)?

Can anyone share a german 1.06 firmware? *thx*

I flashed my MDAc with a english (WWE) firmware but I´m unable to go through the change language process. It wont work on my device cause the hacked firmware is unable to be installed via the hacked maupdate.exe.
Anyone out there who has a working, german ROM file an will share it to me? *thx*

My Prophet is dead!!! What can i do? PLZ Help!!!

Hi. Congratulations for your good work!!!
Last week i bought an O2 XDA Neo (used) from Germany. Everything was working ok. The only problem was with the language (German) so i wanted to change the language to English and after that if it was possible to Greek. I thought that the only way to do that was to change its firmware. My phone had the official firmware WM5. I downloaded and installed ActiveSync on computer. Then i synchonised the PC with the phone succesfully. And at last i runned a rom that downloaded from wiki from the prophet forum. It installed succefully but after a restart the phone stucked on a three colour screen. I reinstalled the same rom and another rom but the problem is the same. Nothing works. The phone is dead?
What did wrong? Is it possible to repair this problem? Plz if enyone knows something, i would appreciate it if he replies to this thread.

the good thing is..
your prophet is NOT dead..
simply flash it again..
tri-colour screen is a bootloader mode and in that state you still can flash your neo with RUU ROMs
a prophet is called DEAD ,only if it cannot enter bootloader state
flash it with ORIGINAL ROM..and that should works..
read the instructions before going to WM6 as it needs some steps before simply flashing it

check this link :
http://forum.xda-developers.com/showthread.php?t=389558

Hi m friends. After hard work i finally made my phone works again. I instaled the oficial rom for prophet (O2 Germany) that founded in another thread. Then it worked fine. Then i hadrspled my devive and finally i installed a WM6 rom caslled evolution.... and it worked fine. But does enyone knows if it is possible to have greek language and greek keypad on my prophet? Thank you for your help in advance.

There is a greek ROM here: http://forum.xda-developers.com/showthread.php?t=323868
It uses the old upgrading method, so you will need to flash the "Part One" ROM first, then don't do anything to the device and then flash the "Part 2".

[Q] HTC Desire HD 2.50 Rom, no Dutch language in the list!

Hi People,
A while ago i decided to root and flash my phone to get miui on it. It all went well, but now the volume button of the device fell out, the 'H' on the back fell off etcetera. So i want to send it back for service. Although i had to set everything back to factory state. My device was still rooted so i put the stock rom back on it. I'm from the netherlands, and the dutch language was in the selection menu, so that was fine. But then i got a lot of errors after restoring a Titanium backup. Errors containing 'android.process.acore'. I tried to update the phone, because i thought that maybe then the error would go away, but it didn't. So i decided to go to the bootloader and restore to factory settings. That all went well, and when i started my phone again it was in dutch, just as i want it to be. I firstly had to select a carrier, mine was on the list, so that was fine too, but then i had to select a language. Unfortunately the dutch language wasn't in the list!
These were the only options:
English (United Kingdom)
English (Ireland)
Espanol (Reino Unido)
Espanol (Irlanda)
Francais (Royaume-Uni)
Francais (Irlande)
Italiano (Regno Unito)
Italiano (Irlanda)
I tried a few RUU files to see if there was a dutch language on any of them, but there wasn't. I can't send the phone back without having the possibility to choose the dutch language, because then they can see i have flashed it once and i would lose my warranty. Maybe i have already lost it, but it is worth to try. It's not common that a phone is falling apart in just a little year. Does anybody know how to get my stock rom to dutch? Maybe i've got a wrong bootloader? But since i am in firmware version 2.50 i can't downgrade anymore i thought?
Any help is very appreciated!
Ps. I'm Sorry for my bad English
Many thanks,
Laurens
Edit:
I have tried selecting those languages that were available but firstly every language on the list showed the language described, just as it has to do. But now I selected the 'English (Ireland)' language again, and everything is dutch again! Very stange... Should this be enough to send my phone for service? The device has stock rom, firmware 2.50, S-On and is dutch (at least for now).