I have treo 750v, WM6.
I have done the procedure below:
1. Pairing my device with the laptop via Bluetooth.
2. On my Treo, clicked start > internet connection sharing > chosing bluetooth pan > click connect.
3. Device told me to activate Bluetooth on my PC. then I activated my Bluetooth PAN on my laptop. (I'm having BlueSoleil bluetooth manager installed on my laptop).
4. Treo said "Connected". My BlueSoleil manager said connected with an animation showing a link between my device and laptop icons. It even showed some message of its assigned IP address, etc.
But, i can not connect to internet on my laptop. I did ping to google, it said "Request time out".
Very weird, because when I choose USB Cable to do internet connection sharing, the connection is working seamlessly, i can connect to internet, good ping to google or any other sites, but not with BT PAN.
Please advice what to check, what to do, etc.. thanks
no replies yet, i hope someone will read and provide some suggestion for my problem. thanks
How about using the Windows' bluetooth manager?
My bluetooth places -> entire bluetooth neighborhood -> right click on your device name -> connect Network Access Point
I use this method every time and it always works.
Rgds,
hapmas77 said:
How about using the Windows' bluetooth manager?
My bluetooth places -> entire bluetooth neighborhood -> right click on your device name -> connect Network Access Point
I use this method every time and it always works.
Rgds,
Click to expand...
Click to collapse
I tried it just now as you suggested. it then says network connected. but then i cant connect to the internet from my laptop. so i back to using the USB cable, and it works flawlessly.
i wonder where's the missing key???
Two things:
1. With the Windows bluetooth, once the devices are paired and a connection is established (Internet Sharing on the Treo), goto the little bluetooth icon in the systray and right-click on it. Click on the "Quick Connect" menu and select "Network Access". Once you have clicked on "Network Access" you should see your phone listed (my 750 shows as the name I entered for "Owner Information"). Select your phone and that should do it. These steps are similar to the ones I use for my Macbook as well.
2. Regarding BlueSoleil Manager: when I lasted used it I remember having to set up the serial ports manually so they could be used for communication between the desktop and the phone. I haven't used the BlueSoleil since I had a Treo 650, but I still have the software. I'll load it up and see if I can't help you with your problem.
Regards,
idyllic
So I got to work and loaded up BlueSoleil on a system running MS Server 2003 SP2. The bluetooth dongle I'm using is a TRENDnet TBW-101UB V2 with BlueSoleil version 1.4.9.2 build 041108, stack version 04.03.15.20041105.
I paired my stock AT&T Treo 750 to the machine. Started "Internet Sharing" on the Treo making sure to select bluetooth pan and the AT&T network Once this was done I right-clicked on my phone icon in the BlueSoleil Manager and select "Connect." The I choose the "Bluetooth Personal Area Networking Service" and open a web browser to test... so far its worked every time.
Some notes:
1. The internet sharing on the treo isn't instant, give 20 seconds or so to fully connect.
2. The BlueSoleil manager connects even slower... give it 30 seconds.
3. Try repairing the phone.
4. If using the BlueSoleil software, disable the windows bluetooth as the MAY be a conflict there. Basically use one or the other.
I'm not sure if any of this is going to help, but I hope it puts you on the right track.
Regards,
idyllic
I would like to use my HTC Cruise as a modem.
So that it is possible that i have the internet on my laptop.
From my mobile.
I know that it is not usual to do this all the time. But for know it not working.
can somebody help me?
I'm french but plug the PDA on your PC with USB cable
And in program you must have a program internet share (I don't know if in english it is the good word)
Launch it and click on connect
I tried to find it,
but when I connect it to my pc with my usb cable. I only get the program to synchronise. Because it's Vista.
How do i find the internetconnection anywhere else?
this program is on the PPC start -> program
On Vista you need Windows Mobile Device Center 6.1 that you can download from: http://www.microsoft.com/windowsmobile/devicecenter.mspx. It comes in both x64 and x86 flavors.
You also need to run the Internet Sharing application on your phone. On my unbranded HTC Touch Cruise there was no link to that application in Start/Programs. What you have to do, is to go into the Windows folder and run the IntShrUi.exe.
I'm not quite sure, but I think that it automatically creates a link for you in your Programs folder (Windows\Start Menu\Programs\). If it doesn't, you can do that yourself. The link should also be in the windows folder (IntShrUi.lnk) and you can just copy that manually to your Programs folder.
ovidiaconescu, I have an unbranded Cruise as well with the Stock ROM and had that icon in Programs. Don't remember doing anything to get it there.
Internet Sharing app is on the PPC. Here are directions, note that these are from someone else's post in another thread (http://forum.xda-developers.com/showthread.php?t=337714) I have put them here for convenience:
To set up your device as a USB modem
1. On your device, tap Start > Programs > Internet Sharing.
2. In the PC Connection list, select USB.
3. In the Network Connection list, select the name of the connection that your device uses to connect to the Internet.
4. Plug in the USB cable between your device and the computer.
5. Tap Connect.
To end the Internet connection
On the Internet Sharing screen, tap Disconnect.
To set up your device as a bluetooth modem
1. On your device, turn on Bluetooth and set it to visible mode.
2. Initiate a Bluetooth partnership from your device
3. Tap Start > Programs > Accessories > Internet Sharing.
4. Select Bluetooth PAN as the PC Connection.
5. From the Network Connection list, select the name of the connection that your device uses to connect to the Internet.
6. Tap Connect.
7. On your computer, set up a Bluetooth Personal Area Network (PAN) with your device:
For Windows Vista:
a. Click Start > Control Panel > Network and Internet > Network and Sharing Center.
b. Click Manage network connections and then under Personal Area Network, double-click Bluetooth Network Connection.
c. In the Bluetooth Personal Area Network Devices dialog box, select your device, then click Connect.
For Windows XP:
a. Tap Start > Control Panel > Network Connections.
b. Under Personal Area Network, click the Bluetooth Network Connection icon.
c. Under Network Tasks, click View Bluetooth network devices.
d. In the Bluetooth Personal Area Network Devices dialog box, select your device, then click Connect.
8. On the Internet Sharing screen on your device, check if a connected status is displayed, which indicates that your computer has been successfully connected to the Internet using your device as a Bluetooth modem.
Do you think it's possible to do the same kind of thing to access internet with an Archos 605 ??
Hi,
I succeeded to access internet by my WAP connexion mobile on my computer. But some website like gmail or hotmail are not reachable... Does someone have any idea?
I have migrated from a Nokia E90 to the Touch Pro. I am a veteran Windows Mobile user, ever since the days of Windows CE, through Pocket PC 2003, 2003SE, 2005 and WM5.
I have a problem - I would like to use Bluetooth DUN to connect my laptop to the net. I used to do this with my Nokia E90 using *99#, so I know my phone provider will provide it. I can connect successfully using Internet Sharing over Bluetooth, but not using Bluetooth DUN. I get error code 678. I need to use Bluetooth DUN as I need to keep use the Bluetooth PAN on the laptop available to connect to my main computer.
Has anyone successfully connected via Bluetoot DUN yet? COuld you try it and let me know?
I've got the same problem. Fine on all previous phones. Now this one gives me this error.
Anyone solved it?
LLOYDY
Hi Guys!
Can you help with this problem? I've got this same issue. It's really annoying. I Can't also set up bluetooth connection between TP and my PC (Windows Vista).
Any idea?
See whether this can help.
http://www.windowsmobilecool.com/20...ows-smartphone-to-a-windows-pc-via-bluetooth/
My TP can do the BT DUN from my notebook now, but the problem is that it will disconnect after a short while. I am still trying to find out where is the timeout settings.
I did not look at the link but it looks like you guys have missed the apn information out of your extra initialisation commands for your modem
Ice_coffee: 'apn information out of your extra initialisation commands for your modem'
Can you provide those info ? And where to use it ?
I think this URL provide more detail, it works for me.
http://www.ppcsg.com/lofiversion/index.php/t94416.html
Go to the Device Manager, select properties of the Bluetooth Modem, click on the Advanced tab, paste the following string on the Extra initialization commands:
AT+CGDCONT=1,"IP","internet",""
Try to establish Dial Up again, use the following for the dialup dialogue box,
User name: Your Mobile No. [eg. 6591234567]
Password: 65IDEAS [I used this for Singtel]
Dial: *99#
This settings works for me.
excellent instructions here
http://www.filesaveas.com/gprsconnect.html#laptop
including pictures, showing just which settings need adding on your laptop, just copy and paste the gdcont info into the setup screen for your htc usb modem, as per the instructions, you will have to change the apn to the one for your provider.
Vodaphone = internet
O2= mobile.o2.co.uk
t-mobile = general.t-mobile.co.uk
Hello everybody,
I'm trying to get on the internet with my Axim x51v.
And I'm using my Touch Cruise as BT PAN access point (using the Internet sharing option).
I've installer the widcomm bluetooth stack on my x51v, because the Microsoft stack cannot connect to a PAN.
Settings up the PAN connection works perfectly, the x51v even got his IP from the Cruise his DHCP.
But... when I'm trying to browse to a website, it goes wrong
Internet Explorer on the x51v gives the message: "The page cannot be found. Check the name and try again."
I also installed a network sniffer on the Cruise to check which data is send.
This sniffer views the DHCP request, no problem there.
But when I request a website, there are some ARP requests and responses.
AND... there are to packet who look like DNS requests to me, but there source address is the x51v's MAC address and th destination is the Cruise, and there's never a response.
So... I tried to connect to a website by IP instead of hostname, to check if this is a DNS problem, but without any luck
But there is a difference, the sniffer now only shows the ARP requests and responses and Internet Explorer gives a different message: "The page cannot be displayed or donwloaded because the connection was lost. Check the connection and try again later."
Sorry for the long story... I hope someone can help me with this problem
Or point me in the right direction.
Thanks in advance
did you try working with something other than the x51v?
btw, if you want to save yourself the headache, purchase WMWifiRouter..
I also tested this with my PC and Cruise and it worked perfectly. I was able to access the internet through the Cruise.
Forgot to mention that I did try WMWifiRouter, but got the same problem.
edit:
Maybe its usefull to know that the x51v is running WM6.1 (from Football) and the Cruise is running the official WM6.1 ROM from HTC.
Maybe someone knows another way to access the internet on the x51v through the Cruise.
I did also try the Wifi to 3G option from WMWifiRouter. At first the connection was to unstable to browse, but this problem seems to be solved by holding the Cruise further away from the x51v . But with a distance of almost 3 meters the connection still isn't stable enough, it reconnect about every minute.
And I think a distance of 3 meters between the two devices is to much.
Would it be possible to share the Cruise his internet connection over USB?
My idea is to do this using this CF USB card for the x51v.
if the polaris can read your device as a regular syncing device (like a pc or so) there's no reason why WMWifirouter won't pass your Polaris' 3G or Wifi connection to USB connection on your x51v.
I found another solution!
I (re)enabled DUN on the Cruise (throught the registry) and let the x51v dail in on the Cruise.
At first it wouldn't work, but after some messing with some settings it finally worked!
Thanks for your replies Nir36.
ahh. congrats. and a good idea it is.
if you don't mind, write the exact steps of what you did so i can put it in the GUIDES thread in the Q&A section.
Ok, here's what I did.
First to Enable DUN, which was removed since the introduction of internet sharing. (On the Cruise)
Import this keys into your registry
Code:
[HKEY_CURRENT_USER\Software\Microsoft\ATCmdInt]
[HKEY_CURRENT_USER\Software\Microsoft\ATCIV25T]
"TAPILineName"="Cellular Line"
[HKEY_LOCAL_MACHINE\Software\Microsoft\BTHATCI]
"Port"=dword:5
[HKEY_CLASSES_ROOT\atciuiapp\DefaultIcon]
@="shellres.dll,-8334"
[HKEY_CLASSES_ROOT\atciuiapp\SelectIcon]
@="shellres.dll,-8335"
[HKEY_LOCAL_MACHINE\Software\Microsoft\ATCIUI]
"WarningDisplayed"=dword:0
"Connections"=hex(7):53,00,65,00,72,00,69,00,61,00,6c,00,7c,00,43,00,4f,00,4d,\
00,31,00,3a,00,7c,00,31,00,31,00,30,00,20,00,33,00,30,00,30,00,20,00,36,00,\
30,00,30,00,20,00,31,00,32,00,30,00,30,00,20,00,32,00,34,00,30,00,30,00,20,\
00,34,00,38,00,30,00,30,00,20,00,39,00,36,00,30,00,30,00,20,00,31,00,34,00,\
34,00,30,00,30,00,20,00,31,00,39,00,32,00,30,00,30,00,20,00,33,00,38,00,34,\
00,30,00,30,00,20,00,35,00,36,00,30,00,30,00,30,00,20,00,35,00,37,00,36,00,\
30,00,30,00,20,00,31,00,31,00,35,00,32,00,30,00,30,00,20,00,31,00,32,00,38,\
00,30,00,30,00,30,00,20,00,32,00,35,00,36,00,30,00,30,00,30,00,00,00,49,00,\
72,00,43,00,4f,00,4d,00,4d,00,7c,00,43,00,4f,00,4d,00,33,00,3a,00,7c,00,00,\
00,55,00,53,00,42,00,7c,00,43,00,4f,00,4d,00,38,00,3a,00,7c,00,00,00,00,00
"ImplementationDLLs"=""
"LastConnectionIndex"=dword:0
"LastBaudRateIndex"=dword:8
Kopie all the files from the attached zip file into the \windows directory
Softreset the device
When you turn on bluetooth, the Dialup service will be available
Now we can configure the other device to use this Dialup service.
Using the Microsoft bluetooth stack (did not test this).
Go to Start > Settings > Connections > Bluetooth
Select or add the device with DUN enabled
Check the Dialup service for this device and save the settings
Go to Start > Settings > Connections > Connections
Choose 'Add new modem connection'
Give your connection a name, and select the modem type 'Bluetooth' and choose Next
Select the paired bluetooth you want to use and choose next
Now enter the phone number to dial, dial *99# to use your mobile internet connection and choose next
Now you have to fill in your providers username and password for your mobile internet connection. In my case (Vodafone, The Netherlands) the username and password have to be: vodafone
And Finish the wizard.
Using the WIDCOMM bluetooth stack.
Open the bluetooth manager
Create a new shortcut
Choose 'Connect to Internet via phone' and choose Next
Select your phone model (if listed) and choose Next
Make shure your phone's bluetooth is enable and set discoverable and choose Next
Select your phone, you will automaticly go to the next page
Insert a passkey you want to use to comunicate with your phone and choose Next
Accept the connection on your phone
Check the option 'Use this phone as default connection to the internet', Select 'new connection' and choose Next
Fill in a connection name and the phone number *99# (to use your phone's internet connection). And choose Next
Choose Finish to exit the wizard.
Go to Start > Settings > Connections > Connections
Choose 'Manage existing connections'
Choose Edit
Press Next a few times, until you get the username and password fields
Now you have to fill in your providers username and password for your mobile internet connection. In my case (Vodafone, The Netherlands) the username and password have to be: vodafone
And Finish the wizard.