Every time I boot my PC and I want to synch my Jam trought Bluetooth I have to change the Activesynch port settings from COM1 (the default one) to COM5 (the bluetooth one).
Is there any chance to set it to COM5 by default? It seems that Activesync choose the first free COM port by default :roll:
THX
Related
hi iam using o2 mini
and i just upgraded its rom to the 1.11 qtek version
but
when i connect via active syn using the microsoft stack on both mini and my laptop ..
it keeps on saying OPENING PORT asnd then says that the port is busy or being used by some other device
i have matched the port available to the one in active syn
but
its not working
tried other ports too
dont know what to do ???!!?!?!?!?!?!?
PLEASE HELP
open your bluetooth setting first then add incoming port... to your o2 mini active sync, tap onnect via bluetooth...
solution that works
Hi,
I've found this article on another forum. I have tried it and it works !!!
1 To sync with BT first delete all your pairing with your computer and phone on both devices.
2 Go to BT Manager on your phone and click both check boxes for Inbound and Outbound COM ports and pair the devices.
3 Once they are paired go to BT manager (on the phone) again and click on the start button (for BT ActiveSync setup) and pair the devices again if you have to.
4 Once that is done make sure that on the computer in BT Settings the the Serial Port Profile (SPP) "Serial Port COM4" is checked.Click on the phone device>property>services.
5 After that on the computer's BT Manager itself ensure that the COM ports folder shows incoming and outgoing ports with the phone's name in front.
6 Open ActiveSync (on the computer) ensure that the COM port no. is the same as the Incoming COM port no. given in step 5 above and it being shown as available. Sometimes if it is unavailable, the computer needs to be rebooted and then it will be shown as available.
7 Click on ActiveSync thru BT on the phone and it should work.
8 Whenever you wanna disconnect ActiveSync press stop on the compouter to disconnect.
i hapen to have upgraded my bluesoleil software to the latest version 5.05 build 176..
have lots of new features and stability and all.. but i can not BT activesync with this version..
my previous version connects instantly with activesync (despite the sudden stuck ups and disconnections)..
i do the standard discovery and pairing methods in connecting via bluetooth..
and my qtek 9090 (wiza200) can see the activesync service on my PC via BT..
but after that, when i go to activesync>menu>connect via bluetooth.. i am once again prompted that i don't have a PC that have activesync.. so i recheck, and refresh the bluetooth devices and see my PC having activesync service..
anyway.. the new version of Bluesoleil have COM3 and COM4 as the available Bluetooth serial ports, while my 9090 can only create outgoing ports for COM6 and COM7.. i believe this is the reason why AS over BT won't connect.. i remember that i used to have COM6 as my BT serial port on my PC (and activesync)- the same as the outgoing port on my PPC..
now, my question, how can i add COM3 to the list of outgoing BT com ports on my QTEK 9090??
afaik once u've paired a device you must configure outgoing com port via bluetooth-> com ports.
Totally forgot how to do this but if your still stuck I can reinstall bluesoliel and check it out. I remember having some sort of problem that took me a while to figure out. Something to do with the pc only recognizing the device for a few seconds,giving me less than 5 sec window to sync or something like that.
BTW what aku are you currently running on your device??
I had working ActiveSync without problems (configuarated the Com a.s.o.)
but after the last hard reset i cant connect my phone over active sync... my Kaiser shows "no activesync supported pc...)
what can i do?
greetz SciLor
Report this post
did you redo the pairing?
WORKS again...
reinstalled activesync 3 times but thank you!
Hi,
I know this is an old thread but i wanted people thoughts on Activesync over Bluetooth?
What issues are there and how reliable is it?
Im using WM6.1 and plan to sync with Outlook2003 on XPpro sp3.
Thanks
I find activesync via bluetooth very reliable, although not fast enough for transfering large files.
Best way to get it working properly is:
Delete any existing pairings on both the pc and ppc.
Check that the bluetooth program on your pc has a com port set up and that your pc is discoverable.
Go to activesync connection settings on pc, and check that it is set to use the same com port as the previous step.
On ppc, go to activesync and attempt to 'connect via bluetooth'.
When it doesnt find a connection, select to create one, add device, and create a partnership with your pc. It SHOULD find activesync as a service.
Now you can close the bluetooth menu, and 'connect via bluetooth' again.
(this would probably have helped the OP 20 months ago)
I have a bluetooth GPS reciever and i want to connect it on COM port 9 but in the bluetooth settings it only allows me to use 6 or 7, does anyone know how to change this?
Im using the HTC Vox if that makes a difference?
Thanks
When you say "Bluetooth settings" are you referring to the settings in the GPS software (TomTom, Garmin etc) or are you referring to the bluetooth settings in your phone settings?
When you first pair your device with the external bluetooth device, you need to set up and outgoing port (COM5 on a Himalaya, not sure what Vox would use) and also go to the advanced bluetooth settings and chose "serial connection". The com port should then appear in your GPS software bluetooth selection choices.
Let us know if this helps.
Ports :S
Thanks Jadel for the reply, i was referring to the bluetooth settings in the phone not gps software. i have paired it and and selected serial port and then it gives me a selection of ports to use: 6 or 7, but i already have things connecting to those ports and want to select another one to use? Any ideas?
http://www.geekzone.co.nz/content.asp?contentid=2417
the guide may not be using the latests wm version but still it should
give you a clear picture as to where on the PC you handle the activesync comports
rather then on the pda which dont use comports for activesync at all
so i just got the new 1005ha asus netbook today and spent the day setting it up as well as the bluetooth to the fuze. i got it to work with my stereo headset as well as to use data over bluetooth for internet
but i cant seem to make it sync up through activesync for file sharing
any help?
ive had the computer setup a port and told the phone to search in activesync and it doesnt find the com port just the same services each time
OK, sorry if you already did all this, its not 100% clear from your posts:
Create a new incoming port on the PC in bluetooth properties. (exactly where this is may vary - on my win xp its called "bluetooth devices" in control panel)
open active sync (on the pc). File / connection settings. check "allow connections to one of the following" <select the com port you just created>
make sure the pc is discoverable & phone bt is on
on the phone - open bluetooth settings and add a new device
select pc, pair, save etc
hopefully now the phone will see the pc, and activesync will now be available as a service
select sevice, save etc.
launch activesync on phone, and select "connect via bluetooth"
remember to disconnect when you're done! - it wont close the bt connection just because its finished its sync