Related
Does anyone now anymore info on when this will be available and can they clarify if it will also allow bluetooth stereo ? I have seen contradicting reports about lack of CPU power to run stereo bluetooth.
I'm really waiting for push email but the bluetooth stereo would be a nice feature
Qtek 8310
Imate Rom 1.0.8.0
1.5.333.0
4.0.13.17_01.04.00
overclocked to 240mhz
I am one who don't believe that a 200MHz CPU is fast enough to support A2DP.
I'd rather buy a BT stereo headset with a A2DP adapter which can be plugged into Tornado's standard earphone jack.
just my point of view...
I have just updated to the Imate test rom and up to now everything is working great push email works perfectly. The GPRS traffic is not huge (about 140k for the last 8 hours) and although its a test rom there does seem to be any flaws as of yet, one good feature it the automatic WiFi switch off notification which turns off the WiFi if you are not connected to any access point for a period of time.
Tom Tom5 is working without a glitch and the overclock works as well. All in All it's looking as though the official release will be excelent if the test rom is anything to go by.
As for the Bluetooth headset with an ADP2 adapter, I can see your point but I would prefer if your not having to carry loads of gizmos around. Just your phone and your headphones - life would be great. :lol:
Qteck 8310
Imate Rom 2.0.6.0
Operator 2.5.331.1
Radio 4.0.13.25_01.14.00
RIL 2.002
OS 5.1.195 (build 14847.2.0.0)
What did you overclock your device to? What tool dide you use?
Which push email service are you using? Or are running exchange at home?
nplatts said:
Qteck 8310
Imate Rom 2.0.6.0
Operator 2.5.331.1
Radio 4.0.13.25_01.14.00
RIL 2.002
OS 5.1.195 (build 14847.2.0.0)
Click to expand...
Click to collapse
nplatts,
Where did u find the 2.0.6.0 version??? I still have the 1.0.4.0 !! And out of curiosity, what are the differences?
Is there native support for cell info, edge etc which are not working on the current version?
Thanks
Costas
Costas, I'm not sure about the cell info or edge, i have been waiting for the Push email support which seams full implimented in this rom, there is a nice new comms manager which allows you to turn off radio and gprs. the phone works without any problems so far.
I will post a link to download the file I found as soon as i can find it again.
It is a test rom so i dont know if there are any implications or problems updating to different versions, all i know is it works on my Qtek 8310 which is fully inlocked and superCID.
UniqueTouch
I used OMAPClock to overclock to 252mhz, i havent tried any but at that speed the difference is noticble. omapclock.exe is available on this site if you search.
We use an Exchange 2003 server for our push service, previosly we were using sms notifications to impliment the push email (known as microsoft always up to date) and a third party to provide email to sms service this worked very well but was not a full push solution. as soon as i updated the phone and restablised the activesync we started receiving messages over the air straight away.(ater enabling direct push on exchange manager)
Blackberry is dead !!
SP5 Test Rom here
http://rapidshare.de/files/14565845/to_cdl_eur_2060_253311_0114_hertz_test.exe
I'd like to know if there's also noticeable battery cost afte overclocking?
devilxelloss said:
I'd like to know if there's also noticeable battery cost afte overclocking?
Click to expand...
Click to collapse
Not that i can tell.
Hi all,
Laurentius and I are looking at resolving the current issues with A2DP (Many fixes will be in our latest rom, however issues vary from headset to headset.
Some work fine, others are poor quality and some receive PDA lockups or long pauses between streams.
Please could those with A2DP issues, and the need for this protocol to work properly, post the following information.
The current Rom you are you using
The make and Model of your headset
A list of issues you are currently having with A2DP.
Please also try the following to resolve the issue.......
HKLM\Software\Microsoft\Bluetooth\A2DP\Settings\
Remove (Delete the following entries)
BitPool
MaxBitpool
and add the following
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
"Capability"=dword:0000003C
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"SampleRate"=dword:0000BB80
"UseJointStereo"=dword:00000001
Please then remove (un-pair) your headset and Soft Reset
After SR please re-pair Headset and test A2DP again.
Please keep this thread clean and only post A2DP issues with the required information listed above.
Thanks,
Cheers,
Beast
Hi Beast,
Isn't:
"UseJointStereo"=dword:00000000
to get proper stereo sounnd?
Regards,
KOR!
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
gewin said:
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
Click to expand...
Click to collapse
Sorry I meant to say " When the phone comes up turn the headset on and activate A2DP by pressing the button on the HEADSET."
mamiware said:
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
Click to expand...
Click to collapse
Hi Maniware,
Can you please further shed light in detail on the jointstereo?
Why jointstereo to be 1 or 0?
Thanks in advance!
KOR!
It goes well with joint stereo. Seems that it needs much less bandwidth. I've heard that jointstero=1 means that there is mono sound in effect.
"UseJointStereo"=dword:00000001 << mono
"UseJointStereo"=dword:00000002 << joint stereo
"UseJointStereo"=dword:00000000 << stereo
AFAIK
qtek 9000 - Logitech Mobile Bluetooth Headset
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
my feedback:
device:
itech r35
Problems:
sound muted after 2 seconds of music.
audio players used:
audio manager
windows media player
i tried your advices, but not worked for me....
Sometimes it works when i put 70 (binary) on both Maxbitpool and bitpool...but on next device activation or reboot it just stop working...
A2DP and wireless
Just to be clear, my results are when I do not have wlan activated.
I changed UseJointStereo=dword:00000000.
Quality is good and it is definitely stereo.
Still have the auto detect problem. Interesting though, if I walk out of range for a while with the headset on, when I come back into range the A2dp is autodetect and the music starts playing through the headset again, quality is good. If I soft reset with the headset on and A2DP is autodetected, the headset is unusable.
If you do any of this with wlan on the quality is very poor with starts and stops.
Also noticed that audio manager does a better job with bluetooth than gsplayer, I think audio manager may have better caching.
Freezing
I think there's a problem with the latest core os files (AKU 0.7.0)... i havent' tried the MS BT stack, but with the Widcomm, using the bluetooth for anything more than 1 min, completely freezes the phone.
It does when listening music, transferring files, etc... if BT is idle, nothing happens (except than freezing the device when the Comm Manager gets confused and enables BT instead of gsm radio).
So it seems related to the core files.
Switching on and off, transferring data thru BT is a critical task and subject to lockups.
For the record, i used to use the BT A2DP and file transfer without ANY problem whatsoever in my old and horribly-underpowered HTC Tornado (omap850 @195mhz) so IT MUST WORK!
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Hi,
Now that sucks,
I have the same headset HT820 and audio sucks, long pauses etc etc.
Can you post your firmware Revision for me please, it should be printed on the inside of the headband.
Cheers,
Beast
Haha.. can you help my friend Beasty please
He's so happy with his new headset.
rofl......
Cheers,
Leo
@Beast J.K.
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Plantronics Pulsar 260
Sound stops coming fter about 1 second of playback (used TCPM,
Audio Manager)
The same result after applying those reg mods....
Please try and install the stack found here: http://forum.xda-developers.com/showthread.php?t=291639
A2DP problems should go away, but then will come the freeze-after-1-min problems, like with my HP Stereo bluetooth headset
I've flash to your latest WM6 AKU 0.7 (WIFI Fix update 3) ROM just now. But sadly to say, the freezing thing still occurs after playing music with Audio Manager. It even freezes when watching videos using WMP. Usually around 1 minute it shall start freezing. FYI:
Bluetooth model: i-tech Clip
AnnaD said:
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
Click to expand...
Click to collapse
I had the Qtek 9000 with italian version WM5 and i flashed WM6 with no problems. if you dont wanna have any problems unzip the attached file and add in the folder the 3 files (ms_.nbf ; nk.nbf ; radio_.nbf) from your prefered WM6 ROM (I personally use the latest Laurentius & Beast ROM http://forum.xda-developers.com/showthread.php?t=325466) start into bootloader (Power+backlite+softreset) and ROMUpgradeUt.exe
VERY IMPORTANT: you have to charge your batery before any flashing
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
BT-Parrot-Trinity-WM6
Pls. 1.update Parrot met latest version- www.parrot.com
2. update Cyberon / cyberon patchCVSD: www.cyberon.com.tw
( http://www.cyberon.com.tw/upload/qa1/CVSD_Patch.CAB )
-Maja-
Parrot has latest sotware.
Have installed the patch and will let you know if it improves.
Thanks for the quick reply.
BT-Parrot-Trinity-WM6
abeesley said:
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
Click to expand...
Click to collapse
Have exactly the same problems... WM5 worked perfectly with car kit, but since ROM flash update to WM6 never worked the same way then...
Perhaps a flash update to parrot car kit solves the problem...
Any new issue after this?
I've given up on wm6 at the mo. I use a parrot mini and have the same problem with all the wm6 roms I've tried. Have gone back to wm5 and no problems.
I had same problem
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Parrot BT problems
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I checked my CK3100 firmware version and confirmed that is the last one 4.16_C.
I'll try to install the that same BT extension an let you know...
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
BT-Parrot-Trinity-WM6
dateboy said:
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
Click to expand...
Click to collapse
Have installed and works far better now.
Entire weekend without a problem.
Go to JetWare website http://www.jetwaremobile.com/
Parrot BT Problem
i s my post from Parrot:
Hello sir ,
Thank you for your feed back ,our technical engineers are currently doing some advance tests regarding this issue
Inorder to find solutions.
Moreover you can try this procedure inorder to connect your phone with the kit :
First of all , please delete preving paring settings which is present in parrot ck3200 ( settings/ paried devices )
And also in your phone .
And repair your phone by using the menu « disable syncho »
Regards,
Parrot
( maja )
Hi all,
I have just updated my SPV M700 to udk 6.0 Italian WM6 ROM and I'm not able to pair it with my Parrot CK3500 (or Ck3100) hands-free kit...
I have applied both patches from JetWare and Cyberon but still got connection error...
PDA says that connection security code is not recognized by Parrot and Parrot display says that "Bluetooth connection failed".
Anybody can help with this problem?
Thanks
Regards
Parrot and probl.WM6- ck3200,
Hi, is my 3 post from Parrot:
Hello sir ,
Thank you for your feed back , Indeed We notice some issue regarding the phones working in windows mobile 6 et ck3200,
So we are currently doing some advance tests regarding this issue .
And also we get feedbacks from clients, who mentionned us that in software version 2.03 E windows mobile phones works better than in 2.11 .
I can provide you the software version 2.03 e for ck3200 so that you can test it with your windows mobile 6 phone .
Regards,
Daniel PRASANTH
Customer Service
Parrot
174 Quai de Jemmapes
75010 Paris
France
(maja)
I have a new Sprint 6800 -Mogul (ROM 2.09.651.3) with WM6 (pro CE OS 5.2.1238) factory load . I am trying to get it to work a Bluetooth car kit.
Originally tried a Motorla HF850 and had dropout problems (paired and connected great then randomly dropped the connection.
Just bought a Parrot CK3100 (firmware version 4.16c) and it is experiencing exactly the same problems as described by abeesley (thread item #1).
Scattered throughout various blogs is the same theme, this phone has bluetooth issues but there is no consensus of where the problem is or what to do to fix it.
Does anyone know of a fix?
If not who needs to be chased, Sprint, HTC, Microsoft, Parrot
This is getting very frustrating
Thanks
i deleted all pairing from both sides
paired the device with parot
name appeared
but phone both and call register didn't
I have just had the 3200LS installed into my car and am having similiar problems. Most notibly, whenever the phone rings and i press the answer button on the parrot, it disconnects the bluetooth and then i cant hear anything. It does this every single time, but works fine (well 80%) when i dial out from the parrot.
With my Motorola HF850, I have the same issue referring the route to the CK speaker when answering a call. I tried to install all the software/Radio ROM...no way! MY P3600 WM6 does not want to work properly...while no issues running WM5
I have the same problem with the Parrot minikit and HTC TOUCH
Hi all,
I just bought the Parrot minikit, and I am facing the same problems with the HTC TOUCH.
The minikit is paired perfectly, when I dial a number from the TOUCH, the sound of the call remains on the TOUCH, only when pressing the answer button in the minikit it sometimes transfers the call to the minikit.
I opened a SUPPORT case to Parrot and they are saying:
"We have fully tested the HTC Touch in France with our Minikit and we did not see any impediments. "
So I emailed them back with allot of links describing the problem.
Good luck to us all
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
BT-Parrot-Trinity-WM6
fl3nd3r said:
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
Click to expand...
Click to collapse
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
xmaavx said:
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
Click to expand...
Click to collapse
Hi, thanks for your hint. Unfortunately I tried with all of these stuff, but still having the same [email protected] moment I run Lasagna ROM 3.05 KE Full with Jetware ext...and still struggling...I'm desperate....the only way to make it works is to roll back to WM5...but I do not want...
Hi there.
I have just purchased an SPV M700 and since I just recently moved to Canada, I'm planing also to use it as navigator.
Can someone tell me which GPS Bluetooth Receiver to get? Is there any specification that I need to look for, or all of them work?
I look forward to hear from anyone
Thanks
Why?
Why would you want to buy a BT GPS receiver, when your device already has a built-in GPS receiver?
If the GPS is not yet activated, look at
http://trinityguides.info/index.php?option=com_content&task=view&id=38&Itemid=66
for activation.
Regards,
theknf
Black Trinity
MARY 3.3.5 SL
Radio 1.50.08.11
theknf said:
Why would you want to buy a BT GPS receiver, when your device already has a built-in GPS receiver?
If the GPS is not yet activated, look at
http://trinityguides.info/index.php?option=com_content&task=view&id=38&Itemid=66
for activation.
Regards,
theknf
Black Trinity
MARY 3.3.5 SL
Radio 1.50.08.11
Click to expand...
Click to collapse
WoW, I didn't know that.
I though I would need additional Bluetooth GPS Receiver in order for this thing to work.
And the reason why I though I need it, is becuase under: CHANGE PREFERENCES / SHOW GPS STATUS / CONFIGURE I get to choose between:
- TomTom Wired GPS Receiver
- Other Bluetooth GPS receiver
- Other NMEA GPS Receiver
- TomTom Bluetooth GPS receiver
Well, right now I have this:
-------
Windows Mobile 5.0 with the Messaging and Security Features Pack
OS 5.1.342 (Build 15096.3.0.0)
Processor: SC32442A-400MHz
Memory: 49.35
Operator version 19.123.1.615
ROM version: 1.23.61.5
ROM date: 01/25/07
Radio version 1.30.00.01
Protocol Version: 32.63.7020.08H
Do you think I should upgrade to WWE WM6?
And what ROM should I choose to flush?
Once I upgarde to WM6 and upgrade my ROM then I can follow instructions on http://trinityguides.info
-------
Thanks a lot though for getting back to me
kind regards,
ash
a$h said:
WoW, I didn't know that.
* snip *
Operator version 19.123.1.615
ROM version: 1.23.61.5
ROM date: 01/25/07
Radio version 1.30.00.01
Protocol Version: 32.63.7020.08H[/i]
Do you think I should upgrade to WWE WM6?
And what ROM should I choose to flush?
Once I upgarde to WM6 and upgrade my ROM then I can follow instructions on http://trinityguides.info
-------
Thanks a lot though for getting back to me
kind regards,
ash
Click to expand...
Click to collapse
If I am not mistaking, GPS was first activated in Radio 1.36 and onwards....
You need to upgrade the radio to activate the GPS - have a look at the above link to trinityguides. The upgrade of the radio does not erase any of your settings etc., so there is no reason to upgrade the OS, if you´re pleased with what you currently have.
I use MARY 3.3.5 SL (WM6), and am very pleased with it - but to each it's own.
Use TomTom version 6.03, as the option to use internal GPS receiver was added in that version. Otherwise choose "Other NMEA GPS Receiver" - and choose "com9" and "115200 Baud".
You might try to do the latter first, to see if the GPS is indeed activated.
Regards,
theknf
Black Trinity
MARY 3.3.5 SL
Radio 1.50.08.11
a$h said:
Hi there.
Can someone tell me which GPS Bluetooth Receiver to get?
Click to expand...
Click to collapse
Just download one of the many free or trial GPS apps and set the receiver to com 9 in the GPS software's settings, give it a few minutes outside or near a window, then then you will see if you have GPS built in.
All new Trinities for the past 12 months should have GPS built in
Hey guys,
Thanks very much for your help.
Finally I did manage to upgrade radio version and rom aswell.
The GPS was enabled and it did worked fine!
Yes it did work fine, but not anymore!
Why? Cause I did a stupid mistake and I did a hard reset.
By performing hard reset, my TomTom has gone away :-(
Now I need to find a way how to put it back...
Thanks a lot for your support.
you can download a copy of tomtom 6.03 from htcs website (legal folks so dont flame me) and you get a free city map. past that i cant comment
Apparently this is a problem with many different car stereo head units/handsfree kits. I would like to get some info on who has it working and who doesn't. If you could provide the info as follows.
I will start,
-Phone: ATT Fuze
-Head unit: Kenwood DNX 8120
-Rom: Elite RC3
-Radio version: 1.02.25.32
-Specific problem:
1. After hanging up after a call the bluetooth connection drops. A call coming in causes the phone to reconnect to the headunit and handsfree works again until I hangup again. To make a call from the headunit I have to re-establish the bluetooth connection from the phone or headunit first.
2. SMS feature does not work.
3. Battery icon on headunit works when first paired but shows completely empty all times after that.
-Works with other phone?: Yes, ETEN x800 (No SMS), Eten X500 (no SMS)
-Ever worked with this phone in any configuration?: No
-Fixes tried: Jetware Bluetooth Handsfree Extension. Fixes the battery level icon, doesn't fix connection drop problem, or SMS.
I really hope someone can shed some light on this and some type of fix.
-Phone: HTC Raphael
-Head unit: JVC KD-BT1
-Rom: ROMeOS 1.70.1
-Radio version: 1.02.25.28
-Specific problem:
1. I seem to have the same problem with the connection drop you describe. Although I'm not sure it's always.
2. SMS feature does not work either
3. Sometimes I can't acces my phonebook through the headunit, a reconnect most of the times does the trick.
4. Disconnecting the headunit from the phone will give an error. I have to shut down BT on my phone to disconnect, so I can connect another phone.
-Works with other phone?: Yes, Nokia 6230i
-Ever worked with this phone in any configuration?: No
-Fixes tried: -
-Phone: touch pro
-carkit: parrot mk6100
-Rom: wwe 1.90.401.1
-Radio version: 1.02.25.19
-Specific problem:
1. had the exact same problem. solved by installing jetware 1.30. now it never disconnects.
2. SMS feature dunno (never tried)
3. battery icon fixed also by jetware
-Works with other phone?: Yes, qtek 8310 (wm6, also with jetware), se z520i
-Ever worked with this phone in any configuration?: yes
-Fixes tried: Jetware Bluetooth Handsfree Extension - for me this solved all problems, including syncing the phonebook on the older qtek 8310 which didn't sync at all.
-Phone: HTC Touch Pro
-BT System: Windows Blue&Me
-Specific problem:
1. sometimes connects automatically to car system (which it should do) and other times it doesnt. very annoying when driving and assumed it has connected.
Stupid Kenwood... not the phone i love my TP
-Phone: ATT Fuze
-Head unit: Kenwood DNX 6140
-Rom: EnergyRom 2.0 Series build 32609
-Radio version: 1.12.25.19
-Specific problem:
SMS not working
AD2P not connecting. Just getting "No Device"
I even try to connect Via USB... no love there either, and it locked up the Kenwood.
I am going to try a few A2DP programs i found. will report back when i have more answers.
Dolph
Update: So I did some messing around with the system settings on my phone and one the DNX 6140. I found that if i delete the bluetooth profile off of both the TP and the Kenwood, then pair via the kenwood not the Touch Pro, disable A2DP and grant access to my phonebook. They seem to "play well together". The moment I enable the A2DP on the Kenwood I get issues. I turn off A2DP and the Kenwood acts like everything is fine again. I am going to see if there are any other A2DP profiles that I can install on my TP, then do some messing around. I'll keep you guys posted.
Update #2: I have officially paired my TP to use the handsfree function, Phonebook download with voice dialing, and A2DP for the Kenwood DNX 6140. If you have any questions on how I did it I will create another post below. you can also PM me.
-Phone: ATT Fuze
-Head unit: Dual HD6425
-Rom: NATF 4.5
-Radio version: The ATT leaked one
-Specific problem:
1. When a call ends, the phone won't hang up. I have to turn the phone off manually. I can't seem to hang up the call from the radio like I'm supposed to.
2. I get this background hum sometimes.
3. If I try dialing before the phone connects it will only connect as a hands free device and not A2DP.
Did you find a way to prevent automatic contact download to the Kenwood with the HTC Touch Pro. I have too many contacts to transfer. (i.e more than the Kenwood can handle)
Thanks
Jeffrey
1st post yay, glad I can be of "some" help here as everyone else I've looked someone else has answered before I get a chance to respond lol...but..
-Phone: HTC Fuze
-Head unit: Pioneer 9800BT
-Rom: Stock
-Radio version: 1.02.25.32
-Specific problem:
1. Haven't had any problems with the unit dropping the connection. I can make and receive phone calls just fine. When I dial from the remote control on the unit and use the "Make Call" and "End Call" buttons they work flawlessly.
2. SMS feature on the phone works, but the sound doesn't play through he car speakers. Is that what you meant?
3. Battery icon shows empty on mine too...It never did this with my old Kaiser.
-Works with other phone?: HTC Kaiser (No SMS)
-Ever worked with this phone in any configuration?: No
-Fixes tried: None yet.
Anyone battling with the Kenwood 9140? I've got a call into Kenwood - they said it (touch pro) was tested with 1.90.xx... (FRE) ROM. Nice - the US model they're selling has been tested with only a French ROM. Got a second reply back to contact Parrott (the 9140 has Parrott BT). They forwarded my info on to their OEM division...we'll see.
Oddly, I never had an issue with the Parrott 3000 aftermarket BT unit when I had it installed with an Alpine (who's OEM BT didn't work, either) prior to installing the Kenwood. I figured if Parrott could do it right as a stand-alone, it should be a piece of cake for an embedded version. *shrug*
-Phone: ATT Fuze
-Head unit: Alpine Iva-w505 with kce-400bt (with firmware v 2.51)
-Rom: Latest EnergyRom (issue persists across every version i've used)
-Radio version: 1.14.25.35
-Specific problem:
1. sometimes connects automatically to car system (which it should do) and other times it doesn't.
2. Forcing a connection doesn't always work, but the it will connect when a call is made or received
3. Same issues above affect both phone and audio streaming
4. using MS voice command, it'll loose connection after accepting the command you want. will reconnect a few seconds after the other party picks up the phone.
phone : pro 2
head unit : Bolero 1Z0 035 156F
ROM ver : 1.86.415.2(67102)
Radio ver: 4.49.25.17
1- the pro2 pair with the Bolero nicely with full phone book access with no problem in call droping
2- the sms function is not working not show on car screan and not even a notification sound
hope there is a solution for the sms prob