OK here's the deal.
Everything was working fine. One day I picked up my XDA II off the cradle as I was going home and the screen went all funny and it froze. I did a hard reset and it has never come up since (4+ months).
If I plug it into the power the red light comes on for about 2 minutes and then it disapears.
I've tried taking the battery/sim out and all the suggestions that I've found on this site but nothing seems to take. I've had it off the power for atleast 4 months now so the battery may be gone if it wasn't already.
Does anybody have a clue as to what it may be... red light on.. then off?
Also, I bought this thing when living in Australia, but I'm in NYC now and I can't find a single person who has even heard of the stupid thing. Does anybody know where I could get it repaired around here?
Don't bother asking anyone here; just about the least helpful bunch ever. The speaker in my I-Mate stopped working; no one here was any help at all when I asked where to get parts. It may have been because there appears to be NO place to get parts.
I ended up buying a MDA II from Europe (ebay) and getting the speaker from that. I actually bought a XDA II also from here in the states that had a cracked case; my intention was to combine the two to make a single phone in good shape.
Maybe I can help you in the process. E-mail me offline at [email protected] (remove the ".nospam") and we'll talk.
My phone isnt broken, it still operates but my screens colors are gone... id hope there is something i can do other than a warranty exchange because i have hard spl'ed my phone and this is just a huge mess! =( please help! I didnt drop it in water or drop it at all, it was in my pocket, i took it out... and now everything looks faded and washed out =( it slowly looks like its coming back, but i dont think itll ever be the same =(
I'm no expert, take out the battery and SIM card..blow on the phone, go to McDonalds, grab a 5 piece Nugget and some BBQ sauce...eat the McNuggets and then put the battery back in along with the SIM...charge the battery to 100% and turn it on and see what happens.
Sounds like an LCD issue. Can you post a picture? Unfortunately, every white screen washout I've seen has ended with a return.
See this: http://forum.xda-developers.com/showthread.php?t=332236
Out of the three, two needed to be replaced. There may be some hope with removing the battery though, but the guy that had the luck left it out over a whole vacation.
It's better to return if still under warranty
I have similar problem with HTC 8125... i know you have a Tilt. my suggestion is to return it if it's under warranty. you can reverse back to the original settings. just check out other posts.
same problem
has anyone figured out how to solve this problem? i have the same issue with my htc tilt. however, the screen toggles between the "washed out" screen and the normal beautiful screen. i have dismantled the device several times using Mike's instructions, but i cant figure out which connectors are out of place please please help me out. i can't afford another screen/phone right now
[email protected] said:
has anyone figured out how to solve this problem? i have the same issue with my htc tilt. however, the screen toggles between the "washed out" screen and the normal beautiful screen. i have dismantled the device several times using Mike's instructions, but i cant figure out which connectors are out of place please please help me out. i can't afford another screen/phone right now
Click to expand...
Click to collapse
how come you just didnt replace it? it happened to mine..i tried everything possible..minus opening cuz that would void the warranty..so i just got it replaced by At&t..problem solved
unfortunately, i got my phone off ebay... i dont think it warranteed
[email protected] said:
unfortunately, i got my phone off ebay... i dont think it warranteed
Click to expand...
Click to collapse
ohh sucks..yeah i got my 8125 off ebay and it crapped out on me like 4months later....tried to replaced screen and nothing...
i guess your only option would be to try and get a new screen or something
Washed out screen
I got the same problem took it to AT&T and replaced it. But what worries me now is that I have changed my mobile 3 times already and this is the fourth one. Every time it was a different issue. I wonder once I run out of warranty, which happens towards the end of this year then what? I wish there is some other option of extended warranty or anything that can be taken now.
Fix the screen. Here is directions on how to accomplish that: http://www.mindsofwisemen.com/fileso/other/ReplacingTheLCDonaKaiser.pdf
etnies said:
I'm no expert, take out the battery and SIM card..blow on the phone, go to McDonalds, grab a 5 piece Nugget and some BBQ sauce...eat the McNuggets and then put the battery back in along with the SIM...charge the battery to 100% and turn it on and see what happens.
Click to expand...
Click to collapse
What If he got a BIG MAC??? would that solve the problem or make it worse?
i'm having this same problem but I actually dropped my phone in water. Can anyone help?
lexiv said:
i'm having this same problem but I actually dropped my phone in water. Can anyone help?
Click to expand...
Click to collapse
water got in the LCD. You will have to replace it. If you are in the US I can send mine to you for cheap since I don't want it anymore
Hello There,
I'm from Portugal and i bought 1 MDA Compact on TMobile. I Unlocked it with XDAdev v 1.6 and it works great in my network. After i done a stupid thing. I flash it with a wrong rom and it "Dead" . To recover i Reflash with a Jam_10605_169_10500 ship and it return to live. Now power on and let me calibrate stylus but when try to enter in the main screen apear a White Screen. I can manage and view all with Sync, but nothing more apear into Handset.Only a white screen. Can you help with this please.
Dear Marco,
Usually that's a sign that your LCD is broken. I've got one extra magician with exactly that same problem. Everything works but not the LCD, which seems to be dead. To confirm it, i've tested this "broken" magician with a good LCD and i can see everything...
I guess that you have done something extra besides only upgrading the ROM...
I need to align the screen again & again can any one help me out wer the problem lies
how did this happen? i also encounter a similar problem, when the phone gets warm... when i press on the right side, the click registers mode and more to the left... and when that happend, if i try to go to the alignment screen, it just hangs in there like.. forever... if i put the phone in standby mode, everything gets back to normal in a few minutes.. the problem repeats every time the phone gets warm...
Same
First i was also having the similar problem but now its totally unaligned i.e even after a time its same i click on extreme left it click on extreme right
nasty man... dunno why this is happening... so, my screen is dying.. damn :| what kind of mods did u do to your phone? software ones
I have the same problem! Seems this is an manufacturing issue that's affecting many Diamonds! Does the warranty cover this?
Same problem
Hi Guys,
i'm also facing the same problem,
i have hard resetted my mobile then for a week it worked fine and then again the same problem... damn i lost my all data while hard resetting.... does any one have solution.
did u guys found n e solution
crazymushroom88 said:
did u guys found n e solution
Click to expand...
Click to collapse
YEAH! ) i sent mine to warranty today, lol 15 long days at max until it will be back in my loving arms
i dont know if this might help
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
i can see some leaked fluid above my screen ........... i cannot even explain it , because it's above the screen but i cannot touch it ........ so it's in between.....
i've had the same thing happen to me and sent it in for warranty.
came back ok for awhile, now its happening again. I usually just suspend my phone (power button) and give the LCD a rub that helps it a little, buts its quite unbearable at times.
I've sent it in to warranty for a second time today, warranty is expiring on the 8th of next month so they better fix it by then .
bevoc said:
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
Click to expand...
Click to collapse
HardSPL didnt fix my problems have flickering (blurry/vibrating screen) but it disapears after setting the phone in standby and waking it up again.
bevoc said:
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
Click to expand...
Click to collapse
HardSPL didnt fix my problems have flickering (blurry/vibrating screen) but it disapears after setting the phone in standby and waking it up again. (Only gets blurry flickery at boot)
My diamond only get flickery at the boot and by going to standby and back it disapears.
Guess im lucky
I have the same screen align problem. When the phone gets hot, the screen alignment screw up, similar to this one:
http://www.youtube.com/watch?v=5-IUzerAT0s&feature=related
I was told this is a hw problem as I've tried flashing different ROMs, update radios etc. but still doesn't help.
Right now I'm trying to avoid using the phone when charging or when it becomes warm. That seems to help a bit. Not sure if replacing the screen will help but a few folks here have suggested that.
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
JexL said:
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
Click to expand...
Click to collapse
Please do update if replacing the LCD does in fact get rid of the problem
JexL said:
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
Click to expand...
Click to collapse
dont think that actually helps - you'll prob need to replace the digitizer .
hello2004 said:
I have the same screen align problem. When the phone gets hot, the screen alignment screw up, similar to this one:
http://www.youtube.com/watch?v=5-IUzerAT0s&feature=related
I was told this is a hw problem as I've tried flashing different ROMs, update radios etc. but still doesn't help.
Right now I'm trying to avoid using the phone when charging or when it becomes warm. That seems to help a bit. Not sure if replacing the screen will help but a few folks here have suggested that.
Click to expand...
Click to collapse
Long story short: it is a hardware problem! nothing you can do to fix it via software... and it gets worse, so get it fixed
I have just received mine from service a few days ago... Of course i lost my warranty and I paid almost 200$ to get it fixed... The front case gets replaced entirely (that includes both digitizer and LCD), because it comes in one piece... all components are stuck together that is, even if you have a perfectly working LCD, it will be replaced anyway... Fortunately this helped and I am not experiencing any problems... Also I've been told that this problem may occur again, after some time (1-2 years), if the phone is heavily used (gps, connected on 3G + screen awake for a long period of time), and that the simptoms may vary: some get the digitizer / misalignment problem, others get weird spots on their lcd, etc...
Hope i didn't make to many mistakes and that my reply will help you understand and get your problem solved...
reflexivemedia said:
Long story short: it is a hardware problem! nothing you can do to fix it via software... and it gets worse, so get it fixed
I have just received mine from service a few days ago... Of course i lost my warranty and I paid almost 200$ to get it fixed... The front case gets replaced entirely (that includes both digitizer and LCD), because it comes in one piece... all components are stuck together that is, even if you have a perfectly working LCD, it will be replaced anyway... Fortunately this helped and I am not experiencing any problems... Also I've been told that this problem may occur again, after some time (1-2 years), if the phone is heavily used (gps, connected on 3G + screen awake for a long period of time), and that the simptoms may vary: some get the digitizer / misalignment problem, others get weird spots on their lcd, etc...
Hope i didn't make to many mistakes and that my reply will help you understand and get your problem solved...
Click to expand...
Click to collapse
I'm not too sure about that actually - how you stated the LCD / Digitizer and case comes all in one.
I've actually experienced the same issue, sent it back the first time. Fonebiz did not replace anything but a flex cable. Ironically, issue came back after a months time.
Sent it in a second time for warranty, i specifically included a note stating the issue - they replaced the LCD, but did not replace the digitizer; so guess what ? issue came back within the month.
Phone was finally out of warranty, i decided to send HTC a ***** email and they were very helpful and they've promised me a replacement. Waiting for Fonebiz to check for hardware faults if its all clear then i get a new phone
realazyjai said:
I'm not too sure about that actually - how you stated the LCD / Digitizer and case comes all in one.
I've actually experienced the same issue, sent it back the first time. Fonebiz did not replace anything but a flex cable. Ironically, issue came back after a months time.
Sent it in a second time for warranty, i specifically included a note stating the issue - they replaced the LCD, but did not replace the digitizer; so guess what ? issue came back within the month.
Phone was finally out of warranty, i decided to send HTC a ***** email and they were very helpful and they've promised me a replacement. Waiting for Fonebiz to check for hardware faults if its all clear then i get a new phone
Click to expand...
Click to collapse
i assure you cannot replace just the lcd, not without a hammer! I got my old part back, I can take some pictures of it, just in case And the digitizer is one and the same with the front case... the diamond is a very small phone, that's why there are no screws or other stuff to hold together the lcd and the rest of the case.
So unfortunately for you, they may have told you they replaced the lcd, but i think they did nothing :|
It is very clear that we had the same problem... the digitizer itself got broken... not some cable or lcd
anyway, if your phone has warranty, you are a happy man
Hi eveyone
i have a problem with my i-mate jamin aka HTC prophet.
i have owned this phone for 3 years and everything was going ok, until a few days ago when i reset the phone the screen went completely white and constantly vibrated, eventually the phone battery died, and will not charge anymore.
is this a software problem? or hardware? i am totally comfortable opening it up if need be, i previously opened my old i-mate jam fixing the 2.5mm earphone jack.
any help would be greatly appreciated.
p.s sorry if i have posted this in the wrong section.
anyone??? or should i just throw the phone out?