I resolved problem from my last topic, but now I have the new one. Every soft or hard reset the phone turns it in to bootloader mode. If i want to quit from bootloader i must remove the battery cover, put it back and plug the charger - this is only way to turn on the device.
I can't upgrade the software, because after device turns in bootloader mode everything hangs up, flash software can't do the job. Also upgrade from SD card dosn't work, MDA can't read it.
I have a warranty, but with changed software it is uselessness
What should I do?
EDIT: I found soft-reset, i can make ib by removing the cover of the battery, as you know cover is connecter with hardware-button which turns device off. I suspect, that in my device soft-reset button and combination for hard-reset (power + soft-reset) have been mapped to bootloader mode. And I must only change this mapping to it's old valutes.
Does anybody know how to do that?
PS. Magician is fully functional, i even restored backup (from ActiveSync)
I have the same problem. Does anybody know how to fix it?
reflashing to the new wm6 lookalike rom worked for me... you can probably try flashing back to the standard 1.13 after that.
Bootloader
The bootloader is damaged and msuffering the same fate. i cannot upgrade or re flash as the computer won't recognise the device, i have a copy of the bootloader file i have downloaded off a website, but don't know how to replace the damaged one with this one.
I may just replace the phone and retire it.
help please
hello everybody, i have a VPA compact vodafone, when i was trying to upgrad it, it switched off, and now there's only usb v1.02 on screen, what can i do, help please
thank u
so yea, iono what happened to my mda. i cant seem to turn it on. when i press the reset and camera buttons, it worked before and brought me into bootloader. and that was actually all i could do. now, i cant even get it on, iono whats happened to it. im trying and atempting rigorously to charge it so i can try to fix it. but the charge light dusnt even come on... i dont know what happend. please help me analyzed. i really want to fix this back ._.''
You may need to use the factory charger to charge your device. I keep hearing the problem people experience when trying to charge a completely dead battery with a usb charger. the factory charger is 1amp while usb is half that. that may be why it wouldnt charge.
also, when the phone is in bootloader (tricollor bars) the power does not turn off.
you may need to charge your device completely before turning it on; then flash the original rom to it.
anothor thing about flashing while in bootloader:
If you connect the usb and XP does not recognize it, you have to unplug it, reset the device, then connect the usb again. as soon as you hear the found hardware noise, open the rom upgrade utility. flash. should work.
when posting a question such as this, it helps to provide as much information about the device and the circumstances under which it failed. this being an electronic forum, it is difficult to play detective to find out what you did wrong to mess up the machene.
also remember that it is a machene. it can not ousmart you, but you can outsmart it.
Which is your device,what were you doing when this happened,were you trying to flash a rom ?
bricked Cing. 8125
my device just bricked on my while updating also. not sure why, i use a Cingular 8125. i flashed it to the t-mobile 1.2 rom (like i always do) and then tried flashing it to a new rom and about halfway through it bricked up. now activesync wont even recognize it. how can i fix this?
Bricked up is an over used word on these forums. If it does nothing no lights no charge when you put a fully charged battery in it, then its a brick.
Anyway here is me repeating myself yet again. A Wizard WONT CHARGE A BATTERY without windows mobile running. So charge the battery in another wizard or orbit or buy an external desktop charger /cradle with a spare battery slot or a new battery because it wont charge it
Not really...
Wizard can charge without powered on (when not bricked). It just can't charge if the battery is too flat.
starkwong said:
Not really...
Wizard can charge without powered on (when not bricked). It just can't charge if the battery is too flat.
Click to expand...
Click to collapse
It will charge a completely "flat" or dead battery with the original factory charger. the one that has the output of 1amp, not the usb, which is .5amp
so yea, sorry about this confusing post. sop what i was trying to do was changing my wizard love rom to XM6r5...but i dont know how
what i did was use shelltool and pooped it. but now iono how to really fix it. im still confused now cuz i cant boot up at all. i can get into the bootloader r/g/b screen
but iono how to fix it from there
sound to me like you may not have unlocked your device?
maybe.
try this: reset your phone with the reset button;
put it in bootloader (tricolorscreen) reset holding the camera button while untill it is in bootloader;
plug in the usb;
run the update utility.
as it updates, it will seem to freeze at 100%. do not unplug it.
I recomend you flash the love rom first.
but it says it cant even connect when i pplug my usb to the pc and device
th pc dun really "see" it
and the ruu, dont you need active sync on as well or sumthin? nothin shows up
m1k0e said:
but it says it cant even connect when i pplug my usb to the pc and device
th pc dun really "see" it
and the ruu, dont you need active sync on as well or sumthin? nothin shows up
Click to expand...
Click to collapse
try reseting it. then put it into bootloader; then plug it in; then run the flasher.
if you unplug it while it is in bootloader, then plug it in again it will not read.
exit everything (meaning flashing utility unplug usb; reset phone)
then try it again.
just a side note, dus it matter which ruu im using to do this? or should i use the wizard love first?
okayt so i have tried it, but curiously, how do i know if its actually working when i do that? cuz everytime im in bootloader and open ruu, it goes at first, but the status dusnt move past 0% and then an error message comes up. does it matter ifi supposedly have other programs open in the b/g?
I think it matters which ruu you are using depending on if you have a G4 or G3.
If you have a g4 then use the ruu for a g4.
the guy who designed the wizard service tool would know.
I would flash to the factory rom though to fix any issues first.
what is your IPL SPL? G3 or G4?
well, at least we know that your phone is not bricked. It will get fixed under the right circumstances.
It could be that your battery is not charged all the way.
remove the battery, then put it back in. charge it fully (overnight) and try to flash it to the factory rom.
well i upgraded my rom to wizard love previously, so apparently its a g4 now. i want to upgrade to the XM6r5 ruu but im not too sure.
maybe u could help locate me a few stable and nice roms for g4?
but thanks so far
when i run the RUU, i keep getting an errormessage 260, saying it cant connect my phone to the pc.,..
have you gotten it unbricked yet?
need more infoon your phone and it's current state.
everytime you post a message (it seems) you do not give enough information.
ipl spl current rom ...
I dont know any of these things. untill I do, I can't help you.
If you search the G4 forum you will find information on flashing your phone if it is a G4. (you may need to soft spl or hard spl your phone) look to the G4 forum for information for that.
just because it had the love rom does not mean that it is a g4. all roms that have OS ONLY can be flashed to a G4. If it has SPL/IPL (bootloader) Or extended roms can not be flashed to a G4
oh. haha sorry. now it just boots straight into the bootloader with "ruu" on the upper right hand corner.
ipl is 2.26.0001
spl is 2.26.0001
m1k0e said:
oh. haha sorry. now it just boots straight into the bootloader with "ruu" on the upper right hand corner.
ipl is 2.26.0001
spl is 2.26.0001
Click to expand...
Click to collapse
Its a G4,you can only upgrade through either SoftSPL or HardSPL,read about this in the G4 sub-forum posted as stickies.
but how would i use hardSPL thru only bootloadeR?
update: everytime i restart my phone, it keeps booting up into the bootloader screen with "RU" on the upper right of the screen
m1k0e said:
but how would i use hardSPL thru only bootloadeR?
update: everytime i restart my phone, it keeps booting up into the bootloader screen with "RU" on the upper right of the screen
Click to expand...
Click to collapse
ok,download official carrier's rom, get into Bootloaders,hook up the phone with pc via usb,Now Check,if small usb appears at the bottom of the Bootloader screen,if its there than Run the Ruu in the rom to flash it,but if it doesn't appear,its not establishing connection with pc and phone.There might be a connectivity problem,it cud be usb cable,mini usb port of the phone or usb input of pc.
Yes! you can only do HardSPL if its working normal,you can even try to flash wizard_love rom and if it flashes,then go for HardSPL.but official carrier's rom will be more appropriate and recommended,it will also remove any Extended_Rom corruption,if any.
Here is the story, I have another palm treo 700w I accidentally update the ROM with flash with this rom
Alltel - WM5 OEM (Stock) ROM, the flashing was successfully then when i try to press the start buttom I didn't see the icon, so I reset the phone when i try to turn in on it won't turn on I though i was the battery I charge the phone but even the light won't light up now I have two treo on the same problem
any advise that will help me by the way cannot send the phone to verizon coz am here in the Pacific.
Thanks in advance
d1ulove is online now Report Post Edit/Delete Message
I dont think its bricked try getting it into bootloader and work from there http://Forum.xda-developers.com/showthread.php?t=256236 try a fully charged battery on it
Ok so thank you for tuning in
My htc one sv is soft bricked I think. I can get int he boot loader but when ever I try to select something it never works. I tried unlocking it but it never works from htc dev. Even though it says it has worked it stays the same. It also acts weirdly were when i try going back into the boot loader the led just blinks forever (Orange) i can access fast boot butcannot wipe it. My s-on but whenever I try and use moonshine it never works. If anyone has can help me I will love you. Thanks
not sure if i can give you a definite answer model and sw versions would help. does it automatically boot into hboot or is that the only way you can get it to boot? does it boot up the splash screen then go into hboot? i had something similar to that happen to one of mine when i cross the grounds on the battery. also had a different one i had to do one of the following to get it to boot at all. plug it in to charge, wait for the battery icon then pull and reinsert the battery and try to boot. plug it in to charge without the battery in it then insert the battery and try to boot. then try the same as above with it booted into hboot and or fastboot.