i have this problem 2 times now. both times i had to hard reset the unit. after i reset it, everthing goes back to normal. calendar alarms will ring 30 mins before the due meeting.
then suddenly it doesn't ring anymore. i checked the settings for sounds and notifications and it's checked on nofitication (alarms, reminders). but it doesn't ring. only my alarm clock rings. i keep missing my meetings because of this.
can someone pls help? thanks
you can check this application:
http://www.handster.com/product.php?id=6
it improves among other things alarms, so that they are called and repeated for required time, even if sound swithced off.
I already got two times the same problem.
I set a clock alarm to wake me up at 8am but it only started ringing at 8.12
In the begining I though I maybe didn't hear the first ring
but I had the same issue with a reminder of an appointment. In fact this one only start ringing when I turned the screen on.
It seems that in the "power safe mode" (when the screen is not on), the notification are not displayed in "real time".
Did someone noticed this?
is there a fix?
Vincent
I had a similar problem whith my Universal, and needed a Hard Reset to fix it...
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
jimmynotch said:
On incoming calls, my Fuze does not ring. I have it set to 'vibrate and ring' and it only vibrates. I have changed ringtones, ring settings, turned it off and back on, soft reset, pulled the battery out, etc and nothing will make my phone ring. All other notifications work (alarms, text messages, etc) and it will work on speaker phone once a call is connected. Is there any advice? I am trying to avoid a Hard-reset because I have the device set-up perfectly to my tastes...
Click to expand...
Click to collapse
What format is the ring tone in?
My ringtone is the 'Oldphone2' and it is set at'vibrate and ring'. It just spontaneously started this non-ringing thing this morning prompted by no changing of settings. As I said, I tried messing around with the setting after it stopped ringing, but to no avail. And the frustrating thing is that everything else seems to work fine. Argh!
This may seem silly, but have you checked your ring volume? I've had a situation a few times, for no apparent reason after disconnecting from Activesync, where my ring volume was down to 0. Just a thought.
I HAVE SAME PROBLEM, when you turn all to vibrate only and turn it back up . the ring stop working
Yes. all volume settings are up. ringer volume, call volume, media player volume.... Any other suggestions?
i had the same problem just now.. but changing the ringtone back to the ATT default one fixed it. I also use S2U2 and changing the setting for "vibrate when answered" or something like that seems to have fixed it as well.
Hope that helps.
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
jimmynotch said:
what is S2U2? I have tried changing the ringtone back to ATT default and fiddling with the settings... No help there. This is frustrating. I have to keepmy phone on my desk in front of me so I dont miss any calls. I miss them if the phone is in my pocket.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=412418
this happened to me too and i hard resetted. that fixed it , then it started again. come to find out th eproblem was when i hit the volume key on the side i turned system valume up and didnt click on ringer volume to turn it up . i had to smack myself
do texts ringer still work?? if so then im pretty sure you have the same problem i had, check it. good luck though
Do you have the unit face down? It has an auto mute when face down.
I also have an alarm problem, although lights go off, the alarm doesn't ring. I also have problems with ringing on incoming calls. The speaker otherwise works fine. Volumes are turned on appropriately. I have Natfv4.0 installed. Do any of the roms fix this problem?
So somehow the problem fixed itself. Dont know how as I didnt even touch my phone for two days. I just turned it on and -BOOM- it rang a few minutes later. Totally spontaneous issue. Really strange this phone is sometimes...
Boy, do I feel dumb.....Never even noted the un hi-lighted RING volume TAB...
I guess I can't use THAT excuse for not answering calls...
Thanks
Ron
I've been having the same problem. It's very baffling to say the least. I believe it was caused by the newer versions of S2U2. Don't know if it's been discussed in that thread or not. Both times this ringer 'glitch' has occurred, it's been when I've password protected S2U2 in settings. The issue was fixed by turning the password protection off, restarting S2U2, soft resetting my Fuze.
I am having the same problem with incoming calls not playing the ring tone and missing calls. I can guarantee you that the system/ring volume controls are at maximum. I have switched ring tones to no avail. It seems to have something to do with changing the ring type from ring to increasing ring and or visa versa. When I change ring type the problem exists. If I turn system/ring volume to silent and then back to maximum it plays the ring tone just fine. There is a bug in there somewhere! I also see a 'send text' lower left of screen and I hear a blurp sound or two in the background wihile the ringtone is playing when the phone is ringing. Anyone else have any issues like this? If so or you have a fix please send it to [email protected] I'm new to this forum stuff and don't really know how to use it. Hope I didn't break any rules.
Thank you,
Trent Alexander
I just have the callers complaining that I take too long to answer the phone. I called myself, and it took 3 1/2 rings for my Fuze to ring...anyone else?
Great PPC, Lousy Phone
Mine too. I just tried it and it does not ring until seven seconds after the light starts flashing. Not only that, it will not retain a custom ring tone. I try to use Old Phone 2 but it reverts to the default on its own.
My vario iv also suffers from the missing ring tone- reboots sometimes help but not always.
I too have had to learn not to rely on the alarm- goes off some days and then not on others.
Just now I thought that I would try to play an mp3 to see if that works- I pressed play and then waited for the track to start- no sound- seconds later the screen changed and touchflow launched itself (again) went back to the home tab and the sound is back?????
Same problem... it stopped ringing...
one thing I notice is that if the number calling is private or block it will only light up (no ring) but from a caller with Caller ID open the phone will ring...
strange...
Been using the alarm function with no problems.......until recently! I woke up half an hour late for work the other day, went to check my phone wondering why the alarm hadn't gone off but the screen was flashing "SNOOZE " & "DISMISS" So the alarm was working but the sounds weren't and i had turned off the vibrate option because I hate that sound it makes.
I go into the alarm sound menu and none of them play, I go into the ringtones and they work fine. Same with message tones and music.
The sound options were all set correctly, alarm volume set to max. Silent mode wasn't the problem.
After a reboot the alarm sounds played again.
Anyone else had this problem?
Sent from my brain
Have you installed some apps like talking tom cat?
Sent from my HTC Sensation 4G using XDA App
Hell no
Sent from my brain
Just had the exact same thing happen to me this morning. This is the second time it has happened. I had also received an SMS before my alarm was supposed to go off, and it vibrated instead of playing my notification sound (even though I did not have it on vibrate only mode). Very, very annoying. Bring on root+CM7!!!
If you have any task killers, remove them.
I know many of the task killers will do this to your clock.
Thanks pr0x2, but I am running only the stock Sense task killer.
The problem may with the ringer. otherwise, go to settings, find sound and select volume. you may have set the specific volume to min. increase the alarm volume in that try.
I've been having weird issues with my alarm all week. Usually I have it set to go off and play an mp3 with a very slow gradual build up in volume. I've been using that setup with alarm clock plus for about a year without any issues. Then on Monday it went off at full volume. Scared the piss outta me and annoyed the girlfriend (my alarm goes off at 5am...). Nothing had changed in my setup. I had been on the same rootbox build for weeks and alarm clock plus hasn't updated since last november.
In troubleshooting it, I recreated the alarm, tried a different mp3, cleared app data and reset up, uninstalled/re-installed the app, cleared caches/fixed permissions and even did a clean wipe to a new rom (slim) and the issue persisted.
The weird thing is that I downloaded Alarm clock extreme to try it as well and it is doing the same thing. I have tried adjusting alarm volume in the control panel as well as within the app and no luck.
Anyone have any ideas before my girlfriend socks me when it goes off tomorrow?
Thanks in advance!