someone can help me. just awhile ago, i was playing my video cam. recording anything just for fun then sudenly it wiltstop recording. it was set record according to disk space. After i finnish recording, my xda2 suddenly stop for 5sec, then. WOW!!! HARD RESET idont know why, idnt push the off on top. WHAT HAPPENED.
please help.
WOW!
Never heard of that problem before!
Let us know your device's versions (Start/Settings/System/Device Information)
Regards,
Rayan
Tanx for youncern,
Rom Version: 1.66.00WWE
Rom date: 02/20/04
Radio Version: 1.08.00
Protocol Version: 1337.18
ExtROM version: 1.66.165
Hi Seach for the latest rom and upgrade the room image. it may solve the problem. may be the rom is corrupted.
If i want to upgrade, is it hardware upgrade or only a software upgrade? (ROM update)
Yes. you only only need to upgrade the rom image(Software only). Good luck!
i used to have a Nokia 7650, followed by a 6600, and when the mem got filled on those, it either locked the phone or forced a hard reset.
this sounds quite a similar scenario.
Related
I got this o2 XDA 2 mini and it freezes a lot as in while tapping suddenly the phone hangs and doesnt respond to the taps I have to reset the phone and at times even after this the problem persists. Its really irritating someone please help me out to sort this problem I have a 256 mb sandisk mmc and my memory isnt fully loaded or something. I have tried master reset still the problem persists please guys help me please. My phone specifications are:
ROM Version 1.11.00 WWE
ROM Date 03/14/05
Radio Version 1.11.00
Protocol version 1337.42
ExtRom Version 1.11.922 WWE
There's already an active thread on this exact topic. Maybe you guys should talk to each other, instead of trying to fix this on your own?
http://forum.xda-developers.com/viewtopic.php?t=26974
Hi All!
I was hoping someone may be able to point me in the right direction, or beat me with a stick if needed.
I have an O2 XDA II Mini, and it's an Australian one.
I'm currently running:
ROM Version: 1.11.00 WWE
ROM Date: 03/14/05 - Woah
Radio Version: 1.11.00
Protocol Version 1337.42
ExtROM version 1.11.922.WWE
Basically I'd like to flash my phone to the latest, but don't need the Big Rom storage, but basically just after the newest firmware (not 2 year old crap)
Does anyone know how I would go about just upgrading the basic firmware of my phone? It's been playing up lately, so I'm hoping an update may fix it.
I've attached a picture of the device part too
Thanks for any help!
Anyone out there
Hmmm I think the Magician is just too old and crap now adays.
It's so bad no one even wants to talk about it
Latest Rom for Magician
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
Cheers
Kittar said:
Hmmm I think the Magician is just too old and crap now adays.
It's so bad no one even wants to talk about it
Click to expand...
Click to collapse
i hope your just kidding
Hi All,
I'm new to this forum and I would like to post a question for you all.
After the upgrade of my Qtek 9100 to WM6 (ROM is core 2), I have big issues with my BT headset (Sony DR-B720NX) and A2DP.
The audio drops many times (and then come back again); this problem was not present using mobile 5 with the addition of A2DP support.
Let me say that I'm happy with CORE 2 ROM, but this problem with A2DP is making me creazy!
I've tried to add some new settings in the registry but with no success.
Could some one help me?
Is there a patch to improve A2DP quality?
Is there a mose stable ROM that I can use?
Below you'll find some more additional info.
ROM version: 10.2.0.8 WWE
ROM date: 2/03/07
Radio Version: 02.25.11
Protocol version: 4.1.13.12
OS 5.2.968 (Build 15341.2.0.0) Core 2.0
IPL: 2.26
SPL: 2.26
GSM: 2.25.11
0S: 10.2.0.8
Thanks to all. Your help is really appreciated
First, look for Schaps configuration tool and install that. It has easy settings for modifying the A2DP parameters in the Registry. If after tweaking and trying that it doesn't work for you, then try another rom. I use A2DP on my roms (XM6r3 and XM6r4) and I don't get the dropouts as I've tweaked around on the paramters for what works for my headphones (Spiders).
There are other roms that people report good results with A2DP. Just telling you my experience.
Oh, and XM6r3 has HTC Audio Manger in it. XM6r4 has MortPlayer in it. Both still have WMP but I like these other apps better.
Hi mfrazzz,
Thanks for your suggestion. I installed the configuration tool, I set the following values:
Use Joint stereo -> enabled
Bit pool -> 60
Max bit pool -> 80
But the issue is still present. Do you have any suggested parameters?
I would like to make some more attempts before flashing another ROM.
Thanks again for your help.
I know how you feel ....
I know exactly how you feel mate , I've gone through the mental agony of flashing a new ROM with all the expectations in the world , only to find out that bluetooth skips like a 6 year old hyperactive kid on a pogo stick .....
IMHO , The fact of the matter is , some ROM's are kicka** for A2DP , while some others are not . XM6 was awesome , but XMR3 gave me some trouble . So did CORE2 , so I never even gave them a run more than for 1 day . None of the pagepool or A2DP settings worked .
So I suggest you find yourself a good ROM to start with ( Nothing personal
against the ROM you are using ..... )
I would highly recommend TNT 1933 .
BTW , I also use a sony ( BTDR30Q )
Good luck......
Thanks dakshithaw,
I think I will follow your suggestion to flash TNT 1933 ROM, but, since I'm quite new to ROM flashing (and I don't want to make some disasters), I have a stupid question for you...
Is it possible to apply the TNT 1933 ROM directly (Actually I'm using a core 2.0 ROM), or should I repeat all the steps from the beginning? (as described in http://forum.xda-developers.com/showthread.php?t=298613).
Thanks for your help and sorry to bother you.
Hmmm...
Colo_c77 said:
Thanks dakshithaw,
I think I will follow your suggestion to flash TNT 1933 ROM, but, since I'm quite new to ROM flashing (and I don't want to make some disasters), I have a stupid question for you...
Is it possible to apply the TNT 1933 ROM directly (Actually I'm using a core 2.0 ROM), or should I repeat all the steps from the beginning? (as described in http://forum.xda-developers.com/showthread.php?t=298613).
Thanks for your help and sorry to bother you.
Click to expand...
Click to collapse
Don't mean to sound inconsiderate , but I honestly can't remember what that post said , and I'm a bit too busy to go thru it right now ....
What I would suggest is , flash a stock rom , then shell-tool the TNT rom .
Hope that solves your problem , cos a Sony headset is a terrible thing to waste ( not to mention a perfectly good Wizard )
Thanks dakshithaw!
I followed your suggestion! I flashed TNT 1933 ROM and it's great! No more AD2P problems, very stable.
Thanks again!
hy peoples i have a htc tytn II i update wm 6.1 and ny device is freezing and i decide to write the original rom.she have this specification
ROM version: 1.56.405.5
Rom date: 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07H
please help me urgent. i want recover my warantee
i try with this file RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.32R2_Ship.exe
but i have error:vendor id error.
help please
HardSPL... READ before doing stuff!
this is not a help is jut words.
JMorrison said:
this is not a help is jut words.
Click to expand...
Click to collapse
You are being told that you should have used HARDSPL before installing a new ROM.
You were told to READ THE WIKI - it will get you out of where you are at the moment and fix your problem.
http://forum.xda-developers.com/showthread.php?t=369282
Bill
i try use hardspl but i have white screen and this is the end.i want say something:my device is kais130 and i 'm register to the htc club.i download my wm 6.1 rom and i update without hardspl or anything else.why?i supose if i have original rom from htc i can update without hardspl.i'st true?peoples i need one original rom from htc with this specifications:
ROM version: 1.56.405.5
Rom date: 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07H
if someone can help me please do it....any wiki word is not help.please help....
it might help if you stated who your carrier is? what country are you in? what rom was originally loaded on our pda..
ANd yes, reading the wiki was a helpful suggestion
as they say, read the f****** wiki...
ToDo's when you get a white screen and cannot install HardSPL
http://forum.xda-developers.com/showthread.php?t=354061
Since this thread is on the top anyway...
You seem to have trouble conveying your problem.
Read the Wiki and you will find the issue of a white screen with hard spl.
The procedure is well documented.
Troubleshooting
Posting here is not going to solve your problem. If you have trouble understanding the wiki, then I suggest you find someone who can help read it with you one on one.
Be Patient
...and just read the wiki, right now it seems to be the only sound advice you can get right now. nobody is going to give you a phone step by step procedure.
Good Luck
eagle 1 said:
it might help if you stated who your carrier is? what country are you in? what rom was originally loaded on our pda..
ANd yes, reading the wiki was a helpful suggestion
Click to expand...
Click to collapse
this is the specifications from the device
ROM version: 1.56.405.5
Rom date: 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07H
i'm from romania and i have in this moment wm 6.1 from htc site.
yi3o8 said:
Since this thread is on the top anyway...
You seem to have trouble conveying your problem.
Read the Wiki and you will find the issue of a white screen with hard spl.
The procedure is well documented.
Troubleshooting
Posting here is not going to solve your problem. If you have trouble understanding the wiki, then I suggest you find someone who can help read it with you one on one.
Click to expand...
Click to collapse
i undestand well about hardspl white screen and where is the link for the htc offical rom?on the xda site i find more roms ... one link please.
jpmalum said:
...and just read the wiki, right now it seems to be the only sound advice you can get right now. nobody is going to give you a phone step by step procedure.
Good Luck
Click to expand...
Click to collapse
man is true...i very easy for anybody to say me:RTFM....thx anyway
JMorrison said:
man is true...i very easy for anybody to say me:RTFM....thx anyway
Click to expand...
Click to collapse
Not sure what you want JMorrison -
I had the white screen as well - I read the WIKI - I did the HARDSPL like it says. I then flashed a new ROM and it worked.
So - what EXACTLY do you need?
Have you read the WIKI?
Have you installed the HARDSPL?
Are you STILL having an issue? If so - what is your issue?
whk said:
Not sure what you want JMorrison -
I had the white screen as well - I read the WIKI - I did the HARDSPL like it says. I then flashed a new ROM and it worked.
So - what EXACTLY do you need?
Have you read the WIKI?
Have you installed the HARDSPL?
Are you STILL having an issue? If so - what is your issue?
Click to expand...
Click to collapse
man yestarday i update my TyTN II from htc site with the official WM 6.1.i had before wm 6 with this specifications:
ROM version: 1.56.405.5
Rom date: 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07H
i want put my old rom back.i try here http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs to find a file. i find this http://rapidshare.com/files/5781641...dio_sign_22.45.88.07_1.27.12.11_Ship.rar.html
when i try to install this message appears:invalid vendor error.i try to use hardspl but i have white screen and i stop to try.i need official version of rom because i want return my device to service.you undestand now?i want put my old version rom back on my device with my old version with this specification ROM version: 1.56.405.5
Rom date: 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07H
but i need the original because i can lose the warantee
sorry for my stupid english
JMorrison said:
man yestarday i update my TyTN II from htc site with the official WM 6.1.i had before wm 6 with this specifications:
ROM version: 1.56.405.5
Rom date: 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07H
i want put my old rom back.i try here http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs to find a file. i find this http://rapidshare.com/files/5781641...dio_sign_22.45.88.07_1.27.12.11_Ship.rar.html
when i try to install this message appears:invalid vendor error.i try to use hardspl but i have white screen and i stop to try.i need official version of rom because i want return my device to service.you undestand now?i want put my old version rom back on my device with my old version with this specification ROM version: 1.56.405.5
Rom date: 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07H
but i need the original because i can lose the warantee
sorry for my stupid english
Click to expand...
Click to collapse
NO - I do NOT understand now. Sorry -
There was a specific question asked - HAVE YOU INSTALLED HARDSPL?
If yes then in boot loader mode you should have OLIPOF showing. Do you?
If not and you are getting a white screen then follow the directions for the Whitescreen on the WIKI.
Bill
thx for answer
man for the first time i need the official version of this rom
ROM version: 1.56.405.5
Rom date: 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07H
i must say something:i buy my device from romania and she is unlock in any gsm network.i update the wm 6.1 rom from htc and now i want back to my old version rom. when i update wm 6.1 from htc site i did not need the hardspl.ehy now i need it if i try to install a official version rom?
thx
If I understand you correctly, then I think I can end the confusion.
Problem Summary:
You had an original shipped version of WM6 on your phone. You downloaded and flashed the official HTC WM 6.1 version. For whatever reason you want to revert back to WM6 but cannot because of the "Invalid Vendor ID" error.
If I got this right, then here are the steps you need to follow:
A) Flash HardSPL to your phone using the process outlined for phones with the "white screen"
B) Flash the original WM6 ship ROM you downloaded
C) Follow the instructions for removing HardSPL and returning your device to its original SPL.
Now please check the Wiki and the stickies in the Kaiser sections for the instructions on how to complete these steps. I am not trying to flame you, but you NEED to do this on your own. It is NOT difficult.
NotATreoFan said:
If I understand you correctly, then I think I can end the confusion.
Problem Summary:
You had an original shipped version of WM6 on your phone. You downloaded and flashed the official HTC WM 6.1 version. For whatever reason you want to revert back to WM6 but cannot because of the "Invalid Vendor ID" error.
If I got this right, then here are the steps you need to follow:
A) Flash HardSPL to your phone using the process outlined for phones with the "white screen"
B) Flash the original WM6 ship ROM you downloaded
C) Follow the instructions for removing HardSPL and returning your device to its original SPL.
Now please check the Wiki and the stickies in the Kaiser sections for the instructions on how to complete these steps. I am not trying to flame you, but you NEED to do this on your own. It is NOT difficult.
Click to expand...
Click to collapse
man you undestand very well.but where from i can download official version with this specifications?
ROM version: 1.56.405.5
Rom date: 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07H
thx man
JMorrison said:
man you undestand very well.but where from i can download official version with this specifications?
ROM version: 1.56.405.5
Rom date: 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07H
thx man
Click to expand...
Click to collapse
Try here: http://forum.xda-developers.com/showthread.php?t=343198
Hello All,
I just got used Fuze from someone as my old phone died.
Previous owner had custom rom put on it. Some of the things are not working like when I get call, I can't switch to speaker mode thru the speaker icon.
Also clock is showing in 24Hr mode. I like with AM/PM sign.
Can gurus recommend me good ROM with good Radio and all the things on it? should I put AT&T stock ROM on it? Thanks in advance!!
This is what I found on my phone:
Hardspl:
SPL-1.90.Olinex
CE OS 5.2.21018 (build 21018.1.6.0)
Rom version: ROMeOS v1.90.2 WWE
Rom date: 04/03/2009
Radio version: 1.02.25.32
Protocol version: 52.39c.25.22U
abhiku said:
Hello All,
I just got used Fuze from someone as my old phone died.
Previous owner had custom rom put on it. Some of the things are not working like when I get call, I can't switch to speaker mode thru the speaker icon.
Also clock is showing in 24Hr mode. I like with AM/PM sign.
Can gurus recommend me good ROM with good Radio and all the things on it? should I put AT&T stock ROM on it? Thanks in advance!!
This is what I found on my phone:
Hardspl:
SPL-1.90.Olinex
CE OS 5.2.21018 (build 21018.1.6.0)
Rom version: ROMeOS v1.90.2 WWE
Rom date: 04/03/2009
Radio version: 1.02.25.32
Protocol version: 52.39c.25.22U
Click to expand...
Click to collapse
well as a new owner of a fuze, as well, I recommend you read ROMeOS rom thread for bug fixes regarding speaker phone issue. To change am/pm simply go to start>settings>system>regional settings> make sure region is English United States>time tab>time style h:mm:ss tt