XDAII and BT Car Kit - MDA II, XDA II, 2060 Accessories

Hi Guys,,,me again
Ive a new XDAII and a Motorola BT Car Kit. This is the scenario.
Ive bonded...Great
I can make calls via BT....Better :lol:
Cant use voice dial :?
Get incomming thru BT but no button will answere :roll:
If Im on a call that I made on BT and another comes in I can accept it.
Motorola wont answere emails...typical
O2 say "old" XDAII works but new one dont coz of bugs in Windows Pocket 2003. They advise a ROM upgrade but my XDA has version1.66.00WWE and that aint on their website yet.
What can I (and about 10000 Sky Installers) do?????
HELP
JagMan

Related

JABRA BT200/XDAII Reconnect/Bonding problems

I have been using a JABRA BT200 Headset with my XDAII and have always had the same problem, once the BT200 has been paired with the XDAII it works fine but once I put the headset into it's charging cradle and then remove it and try to use it again it always loses it's bond, the only way I can get it to communicate with the XDAII again is to pair it again.
I don't know whether the problem lies with the BT200 or the XDAII
Does anyone else have this problem ???
Thanks
Ian Goulding
hey ian,
it was just recently that i was able to figure out the bt-xda2 bonding; thanks to some helpful chaps in the forum. in the process; i did some research within several topics and read something which may answer your query. when the headset is back in it's cradle; i believe it's "turned off" or is put into inactive mode. the forum message i read indicated that the bonding is lost once the headset is turned off; thus you have to bond again. yes, i have had similar experiences while figuring out the bonding issue. i just keep the bt200 i have out of the cradle; when the time comes to charge it i then holster it and repeat the bonding process once it's charged. i don't think it's a problem with neither devices; it's the default setting i believe. with luck probably the xda-developer guys will come up with a bug fix for this item. which could also include using bt for other than the phone function...like mp3....hint! hint!
cheers
robson
Ian_Goulding said:
I have been using a JABRA BT200 Headset with my XDAII and have always had the same problem, once the BT200 has been paired with the XDAII it works fine but once I put the headset into it's charging cradle and then remove it and try to use it again it always loses it's bond, the only way I can get it to communicate with the XDAII again is to pair it again.
I don't know whether the problem lies with the BT200 or the XDAII
Does anyone else have this problem ???
Thanks
Ian Goulding
Click to expand...
Click to collapse
I've installed Towa's GPS BT patch and the Jabra works perfect.
hey redbull,
what's the Towa's GPS BT patch and where can i find a link?
cheers mate
robson
Towa's gps patch has nothing to do with this...
I'm not sure what you are talking about, but Towa's patch will not solve the Jabra BT200 issue. The more important question to look at here is what version of BT200 you have. If you look on your Jabra BT200 right next to the microphone, there is a combination of letters and numbers, what does yours say? I think the problem has to do with issues in the firmware in the Jabra that were fixed in later versions.
It's usually 2 numbers and a letter on the boom to the Microphone.
I have a 47A and it does not work at all. Also tested a 48A and it doesn't work either.
mine's a 48b. works fine.
Cool, just so we are talking about the same thing, you can turn off the Jabra BT200, and turn it back on, and it still works with the phone? You can charge the headset in it's charger and pull it out and it still works? You can go out of range and then back in range and it still works? You can press the answer phone button on the headset when no call is in progress and then try to make a call and things still work?
Please try these various things and let me know.
I know that the A models are from 2002, and the B models are 2003. So it is possible if yours works with all these scenarios that they fixes or changed something in the 2003 models that allow them to work.
Thanks for your time,
LouisK
I recently purchased a BT 250 with nr. 44B and indeed it works with all the tests you described. (Don't need the BT GPS patch for that)
If only the advanced Headset Profile features would work with the MDA II I would be in heaven...........
Ok, it seems based on feedback I've gotten from several people that any Jabra Freespeak that has a "B" as the last part of it's version number will work correctly, but the "A" models do not. The "B" models according to Jabra are the most recent, and thought they don't admit it, there must have been a change in the firmware that allows the "B" units to work correctly with an XDA2/MDA2/i-Mate that the "A" units don't support.
LouisK
I have a "B" on mine and the same problem of rebonding when Jabra is shut off. I experimented by turning off bluetooth on the i-mate and it still worked. Anyone have ideas of a good headset that will not need rebonding?
I have problems with mine too and its a 16B. Turn the BT headset off and its rebond time again.....
48B works fine for me... can't everyone else just use TOWA's patch... that fixed the problem for others
stryker said:
I have problems with mine too and its a 16B. Turn the BT headset off and its rebond time again.....
Click to expand...
Click to collapse
16B is no good. I've been told that minumum needed is 19B. Below 19B is bluetooth 'handsfree' not 'headset'.
Towa's patch has nothing to do with this. It will not help in this situation. It only applies to Bluetooth Serial Profile, of which the Jabra has none. I have talked to Towa via email to confirm this. For those that installed Towa's patch and said it works, more than likely they didn't have the problem anyway because of the version of Jabra they had.
BT jabra 200/plantronic M3000
Jabra is model 45B, - no nead to repair, Plantronics M3000, no need to repair, but sometimes fails to answer call properly.
Hi 2U all,
I have just purchased a BT200 off Ebay, the number on the boom is 20B. No problems works well , no rebonding problems. Just one wish, it would work with voice. But I will keep praying!
StayLucky Jim :wink:
EMAIL FROM JABRA RE-Bonding Problems with XDA-II
:roll: :roll:
Dear Ian,
Thank you for your e-mail and please accept our apologies for the delay in reply.
We are sorry to hear you are experiencing problems using your JABRA BT200 headset in conjunction with your O2 XDA II.
However, having tested the JABRA BT200 headset with the XDA II, we have encountered the following problems.
When completed charging the headset you will need to synchronise the Headset and the Audio Gateway in your XDA II.
Please follow the steps below:
Select Bluetooth menu> Select Off> Select OK (BT is now disconnected)
Return to desktop (Today view)> Disable BT HS mode> Enable BT HS mode (User
to be prompted to turn On BT radio)>Select OK
Enter BT menu> Select On> Select OK (The XDA II returns to the "Today" view
and will try to synchronise with the HS again.
Check connection by establishing an outgoing call. If no sync - you will need
to re-pair the two devices)
We hope this will solve your problem for you. If you require any further assistance please do not hesitate to contact us again.
Thank you for contacting JABRA Customer Service, Europe
Camilla Vang
Customer Service Representative
GN Netcom, Mobile Division (Copenhagen, Denmark)
Click to expand...
Click to collapse
Seems to me that without actually saying it, JABRA think that the fault lies with the XDA-II!
Regards
Ian Goulding
question?? does the bt200 2.5 work with the imate and a i95c at the same time??
i have two devises an I95cl for nextel not blue tooth and the imate pc phone. i would like if possible to use one headset ?? the bt 2002.5 says it will work for bt phones also?? but will it work at the same time ?? hope iam clear...iam a baby here can you tell
15B, can it be upgraded?
Hello everyone...
I have an MDAII and a Plantronics M3000 BT headset and I have the same pairing problem.
I always have to repair the two divices for them to work...
Any ideas?
Best regards,
Rayan

Jabra BT-800 not working w Qtek 2020 WM2003SE

I bought the Jabra BT-800 headset for 119 EUR and was hoping to enjoy the headset w/o getting my PPC out of my pocketst.
Well that didnt work out. Pairing was easy, and after switching on the headset (in profile on today screen) I could call with it. The only thing is, I cannot get the call list on the headset to work. It doesnt show any numbers at all, and i wonder how its supposed to work anyway.
That being said, I also don't get to see who's calling me when using the headset.
1) Incoming call.... PPC rings..
2) After a few seconds the headset backlight switches on showing "Jabra BT-800" (standard text). I do not get to see who's calling me on my headset.
3) When listening to the ring tone on headset, after a second or two I get a really annoying sqreaking sound and that stays on till I accept the call or hang up.
So it is not working for me. Besides the headset does not stay on my ear correctly. I have small ears and it is really uncomfortable.
I have Qtek 2020 with Windows Mobile 2003 SE ROM (downloaded from this forum), ROM version 2.06.00WWE, Radio 1.18.00, Protocol 1337.38, ExtROM 2.06.100a
The Jabra BT-800 does not do what they say it's supposed to do.
Anyone else got these problems or solutions? Ciao
R.
me too
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Re: me too
dewild1 said:
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Click to expand...
Click to collapse
Lucky you to get that far :evil:
After the upgrade to the Diamond 1.2 I have tried to bond my Bluespoon Digital. That was very easy and everything works fine, exept a call not is trasferred to the headset. I have tried both stacks, and I have tried it with the Sony Ericsson HBH 65. It simply doesn't work at all.
Does anybody have suggestions to what to do??
bluetooth headset not bonding
:lol:
Hi , I had smae problem with new I.Tech clip headset.
It's ok now as I downloaded the POcket Bluetotth Tools from this link:
http://bluetooth.i-networx.de/index_e.html
Now it's ok for incoming and outgoing calls...
Cheers..
Fingers
Persnickety Bluetooth
Thanks for the link!
I had a problem with my Jabra BT250 after the WM upgrade. The mic and speaker remained active on the device, and the earpeice on my headset was active, but not the headset mic. The BT Tools did the trick.
Thanks
Jabra BT800 & XDA ii
Hi there,
The Jabra BT800 isnt compatable with the XDA ii (check www.jabra.com)
I owned this headset and had exactly the same problems, i now own the Jabra BT200 and it works perfectly
The BT800 needs a phone with bluetooth handsfree profile to be able to use the advanced features like caller id. Xda II as standard has only bluetooth headset profile.
I'm not sure about the 2003SE rom some of you guys are using, but I've tried it with the Buzz WM2K5 rom (thanks buzz et al) and this DOES give it the bluetooth handsfree profile it needs.
BUT...
It seems Jabra's idea of caller id is to only pass the number across, and not the name. So for those of us that don't have a photographic memory its pretty useless. This isn't restricted to Xda's either. I tried a couple of Nokia phones that are 'compatible' according to www.jabra.com and these do exactly the same. Number shows on the jabra screen but no name, even though the phone is showing both.
I emailed Jabra about it and they acknowledge it is an issue. They also tell me there is an issue with numbers in international format in that they fail to pass the + sign across, so you can't ring out from the call list.
JD
Ya need 2.20 translated to have a working Hands Free profile.. BT800 needs hands free profile.
Caller ID still only displays if the number is a virgin to your system.. I think HBH662 will work with 2.20.
2005 may work with no problems too.

Using XDA11i with Bluetooth Tom Tom and Bluetooth Headset

Hey everyone
I wonder if someone can help.
Having recently got my XDA11i and managed to pair my Sony Ericcson Bluetooth headset sucessfully. I thought i would go the whole nice yards and get myself sat navigation for the car.
Having now got the tom tom reciever and again sucessfully pairing it to my XDA11i using the tom tom set up wizard, my sony ericcson headset now refuses to connect to my xda.
can anybody help as I am really at a loss as to what I can try to solve this problem.
upgrade BT
Hi, you need to upgrade your BT version to build 3900.
It worked on my M2000
http://www.pdanieuws.nl/modules/mydownloads/singlefile.php?lid=37
Thanks for That
Thanks for the advice Rayman. i have downloaded the patch you suggest however i dont know how to install it on my xda. if you could pleaase help i would be most grateful
Surely it's a case of sticking it on your phone and then, on your phone, tapping on the cab file?
On this topic...
I've historically had problems with Tomtom running and getting a call, both on XDA2 and now XDA2i. Normally what happens is that the call bubble appears but none of the "buttons" on the bubble work, and then TT crashed.
HOWEVER
I was on my way home the other day and for a laugh I turned on TT to tell me the way to go . I got a call from my girlfriend and so I flipped the boom on my Motorola HS810 and waited for it to pair up, then answered the call. It worked, and better yet, when I hung up the call TT hadn't frozen! Made my night, but then I live a sad life
Cheers
A
Preston
I had this very same problem.
Downloading and installing the latest Tom Tom GPS update solved it.
Also, check that you dont have a port conflict (this is what Tom Tom told me to do).
Hello every body
I got my new xdaIIi on O2 , but its locked. i want to unlock it.please anyone has solution for it and very greatful to person.
Thanks for reading this massage
A haq

can someone help

i have an imate jam. i have paired my imate with my computer. the problem i have is i would like to use my computer as a headset. inother words i would like to use the computers speakers and mic over the bluetooth for my imate. i can do this with other mobiles i have but would like to find a way to do it with my imate.
thanks
jay
Maybe this thread can help you
http://forum.xda-developers.com/viewtopic.php?t=33532
Cheers, M
thanks for the link, but i need it the other way round. i would like to use the pc as a headset. my other mobiles have the services on it, but the imate does not. is there another install to make the imate use the pc speakers and mic as a headset
Don't know I'm not so into the BT business yet (only got a BT gps). There's a BlueSoleil BT stack as well you should be able to find it easily.
Success, M
did a search and could not find this stack.
Have you been here?
Bluesoleil BT stack + manager, stable and more profiles
http://forum.xda-developers.com/viewtopic.php?t=18537
Got 7 pages overthere.
thanks will try it

S710 (vox) bluetooth carkit probs

I received my shiny new S710 today (replacing my imate sp5) i am having terrible problems with bluetooth and my car kit (Parrot Ck3100 with latest sortware) The phone connects and syncs ok but disconnects after a few mins and refuses to connect again.
I have an old motorola h605 headset that shows similar problems of not connecting or dropping the connection.
The Ck3100 kit has worked faultlessly with my imate sp5 for the last year.
Has anyone else had any problems with headsets or car kits?!
I have done a hard reset on the S710 and have nothing installed, and also disconnected the power to the CK3100 for 1/2 an hour before attempting to re setup the pairing
iain
Nokia CK7W
On a similar note, while my Vodafone V1415 works with my Nokia CK7W, I cannot end a call by pressing the button. Last number redial (two presses) and Hold or something like it (press and hold) are OK. To be fair, the CK7W is a little dated, but has proven to be fine with both Blue Angel and Hermes.
On the plus side the audio is good, without any echo for the remote caller.
Nokia CK-7W and S710
As with the Qtek 9100, the S710 seems not to operate soomthly with the NOKIA carkit CK-7w. I have to turn volume up to 100% and the sound from the speaker is still rather quite. The person i am calling is complaining that the line is not perfect. So for me it is back to the standard corded earpiece.
So any tips using the CK-7W and vox succesfully together are welcome!
@mcroonen
It's strange that I don't have the same experience as you. What version is your software? Compare with mine in my signature. I'm afraid I can't offer any suggestions, it seems to be pot luck! Maybe we find some variations in the radio stacks that will sort this out.
further to this i managed to borrow a e650 (vox) from work and it worked 100% with my car kit and tomtom and laptop!
I spoke to htc who said they had tested with the parrot ck3100 and said it worked 100%, as my phone was struggling to be detected by several devices and also struggling to detect other things that they recomended getting it replaced.
Spoke to handtech who said they would replace asap
jbn said:
@mcroonen
It's strange that I don't have the same experience as you. What version is your software? Compare with mine in my signature. I'm afraid I can't offer any suggestions, it seems to be pot luck! Maybe we find some variations in the radio stacks that will sort this out.
Click to expand...
Click to collapse
@jbn
KPN
OS: 5.2.1235 (Build 17740.0.2.0)
ROM: 1.15.405.2
Radio: 4.1.12.37_02.83.90
I had problems whith the sound quality and people not hearing me well.
For me it helped to delete the registry settings for the nokia ck-7w
It's under software/htc not sure if it was in LM or CU. I think LM.
Good luck
Had the same problem. Qtek8310 was working fine, S710 not. After a reset of the Parrot also the S710 is working fine.
aage said:
I had problems whith the sound quality and people not hearing me well.
For me it helped to delete the registry settings for the nokia ck-7w
It's under software/htc not sure if it was in LM or CU. I think LM.
Good luck
Click to expand...
Click to collapse
Unfortenately deleting the settings introduces echo and noise (voice sounds like robot). I think S710 and Nokis Ck-7w are not made for eachother.
I will try using the Parrot 3100 as on alternative BT solution..
Parrot CK3300 GPS CAR KIT
I have the Parrot CK3300 GPS CAR KIT and no problems at all with my S710, works a dream
Parrot
Hi,
You should visit http://www.parrot.com/uk/support/downloads
and get the latest software for your Parrot. You will need a bluetooth enabled laptop or to get your bluetooth enabled PC near your car!
Flash your parrot, then connect choosing a windows CE device. It will fully sync your phonebook too.
I use the Orange E650 and connect to my Holux GPS receiver and Parrot 3100 at the same time with no problems at all.
cheers
Sinet2020
JETware
See this thread for a possible solution for the Nokia CK7W!!!!
http://forum.xda-developers.com/showthread.php?t=331096

Categories

Resources