Delkin USB Bridge - MDA II, XDA II, 2060 Accessories

Does anybody know if the new "USB Bridge" from Delkin would allow USB storage devices to be connected to the XDA-II - either to be used as "attached" storage for program access, or to allow file transfer to/from the XDA-II "in the field" without a PC?

not sure if it would work but from what i can understand from here
Delkin?s new $70 USB Bridge works by copying the entire content of a MSC or PTP USB device to another USB storage without a PC.
Click to expand...
Click to collapse
http://www.everythingusb.com/news/index/3555.htm
then you can only copy all the data at once not files
so it seems more like an backup option
and if you connect an usb harddisk then copying all the data from it to the mem of the xda is not likely to be a good move

Related

Raphael - USB Host?

I am wondering whether or not the Raphael has USB Host functionality? I read this on some internet sites, but searching the Wiki and other avaliable informative websites couldn't bring light to this issue. I know that HTCs ExtUSB only is a proprietary connector, enhancing the USB Port with audio and video functionality. This is not what I'm talking about!
Host USB allows devices to act as an USB host (like a computer) and as such access USB-Devices like harddrives or USB sticks, which is more than convinient. As some other Pocket PC have it, I'm hoping deeply my future playmate has it also.
Maybe some of the lucky users could verify?
Thanks!
Doesn't look like it'll have any host facility no. The only HTC device ive seen with host are the bigger HTC Advantage's which have a normal USB port. I dont think the Qualcomm chipset offers USB host either.
This would be a nice thing to have...
I am still owner of a PocketLoox 720 which is capable of accessing USB sticks and USB HD.
It'd be nice. But I guess it would eat the battery.
I think I saw somewhere a USB bluetooth thingy that enables you to read USB sticks via Bluetooth.
well to be precise both the diamond and raphael have some interesting host ability - in SPL you can set usb host to read NBH file off usb. however you need the right adapter cable, so I haven't tried that yet on the diamond (and no raphael yet).
cmonex said:
well to be precise both the diamond and raphael have some interesting host ability - in SPL you can set usb host to read NBH file off usb. however you need the right adapter cable, so I haven't tried that yet on the diamond (and no raphael yet).
Click to expand...
Click to collapse
What an interesting feature... Maybe it's for service centres to unbrick warranty returns easily?
Rory
cmonex said:
well to be precise both the diamond and raphael have some interesting host ability - in SPL you can set usb host to read NBH file off usb. however you need the right adapter cable, so I haven't tried that yet on the diamond (and no raphael yet).
Click to expand...
Click to collapse
Have you tried with the Athena USB host cable?
Pantaloonie said:
Have you tried with the Athena USB host cable?
Click to expand...
Click to collapse
oh hmm. does that cable plug in the miniusb port of the athena?
cmonex said:
oh hmm. does that cable plug in the miniusb port of the athena?
Click to expand...
Click to collapse
Yes it does, I was hoping it would work with the Diamond and Raphael.
Pantaloonie said:
Yes it does, I was hoping it would work with the Diamond and Raphael.
Click to expand...
Click to collapse
mm, thought it plugged in the other port on the athena...because it also handles vga out (the 4 in 1 cable). and this other port (beside the miniusb sync port) has the icons vga out and usb host.
that is clearly not the same socket as the miniusb (i.e. the sync port).
the diamond & raphael unfortunately only have this miniusb (which is for the sync on athena).
You're right - It's been so long since I used the USB host on the Athena I'd forgotten which port it uses.
Back to the drawing board on that one I guess.
Pantaloonie said:
You're right - It's been so long since I used the USB host on the Athena I'd forgotten which port it uses.
Back to the drawing board on that one I guess.
Click to expand...
Click to collapse
yeah, I also have the 4 in 1 somewhere in the drawer
I only got it to have all cool accessories for my Athena.
anyway, I'll update the thread if I find out more about the cable needed for diamond/raphael
I read in the Diamond service manual (foeund somewhere on the forum here) about using an USB SD-card reader on the sync port on the Diamond. It is used when servicing the phone to upload firmware and test software to the internal storage.
On the picture it looks just like a normal sd card reader that is plugged into a standard USB port on one of the ends on the cable. it is a Y cable where one end is power, one USB and one mini usb to plug in the phone.
I am just doing some tests on this now. I made a usb cable with mini usb in one end and normal usb in the other end. On the on ememstick I have here in the office nothing happens.I will continue to look into this matter.
holy moses. I got something working here!!!!!!!!!!!!!
I had to rebuild my cable a little bit here to get this working.
The new external USB port is now powered from a 5Volts source. I have cut the 5 volts connection between my Diamond and my USB memory.
I am using a standard USB flash memory which i got at some commercial stuff long time ago.
I formatted the USB stick to FAT32 on my computer first.
The thing I tried was:
downloade a custom firmware.
copied the xxx.nbh file to the flash
renamed it to "DIAMIMG.NBH" Capital letters!!
Started up the phone holding VOLUME DOWN and RIGHT button down while giving the power button a short push.
It fired up the Olimex boot scene and asked me to push power button to confirm flashing.
After that it flashed my phone for about 10 minutes (from the USB flash memory)
So there is NO DOUBT, the Diamond has USB master capabilities!!!!!!!!!!!!!!!
When I am in file explorer I still can't get in contact with the memory.
Anyone that has the USB drivers from som larger HTC device????
Can anyone try to flash a phone with an un signed firmware or a firmware from wrong region on a phone that has the original bootloader using this method?
Does anyone know how to use external memory by usb hosting
zeb crs said:
holy moses. I got something working here!!!!!!!!!!!!!
I had to rebuild my cable a little bit here to get this working.
The new external USB port is now powered from a 5Volts source. I have cut the 5 volts connection between my Diamond and my USB memory.
I am using a standard USB flash memory which i got at some commercial stuff long time ago.
I formatted the USB stick to FAT32 on my computer first.
The thing I tried was:
downloade a custom firmware.
copied the xxx.nbh file to the flash
renamed it to "DIAMIMG.NBH" Capital letters!!
Started up the phone holding VOLUME DOWN and RIGHT button down while giving the power button a short push.
It fired up the Olimex boot scene and asked me to push power button to confirm flashing.
After that it flashed my phone for about 10 minutes (from the USB flash memory)
So there is NO DOUBT, the Diamond has USB master capabilities!!!!!!!!!!!!!!!
When I am in file explorer I still can't get in contact with the memory.
Anyone that has the USB drivers from som larger HTC device????
Can anyone try to flash a phone with an un signed firmware or a firmware from wrong region on a phone that has the original bootloader using this method?
Click to expand...
Click to collapse
heh, you were faster at building the cable congrats.
btw, what special modifications did you need to make? just the 5V source?
anyway, this just confirms what i found in bootloader disassembly then.
not sure on the availability of usb host drivers. maybe we will need to implement it ourselves
and sorry, but i do not understand the question about flashing unsigned stuff. the stock bootloader will not accept unsigned NBH, no matter where it comes from, sorry to disappoint you.
EDIT: I downloaded the service manual now, thanks. wasn't aware this was out in the open
anyway, the text mentions you must plug in AC power for the USB host. what a shame.
zeb crs said:
When I am in file explorer I still can't get in contact with the memory.
Anyone that has the USB drivers from som larger HTC device????
Click to expand...
Click to collapse
Just an idea, have you tried to start WM5torage on Diamond ?
It lists the MovieNAND and the system partition. OK, you can't take access to it, but maybe WM5torage recognizes the USB stick from OS.
If it does, maybe a modified version of WM5torage can do these job ?
For short test download here:
WM5torage
Ok, WM5torage isn't the right way to test the access from OS, because it needs at last a running driver.
Qualcomm was running Oxford Semiconductor solutions, maybe the integrated USB OTG is a license from this company ?
@cmonex:
Is it possible to adapt the integrated bootloader driver to WM ?
USB drive is HTC supported
I just read through the US user manual and Section 1.13 Using you Device as a USB Drive. http://member.america.htc.com/downl...al/HTC_Touch_Pro/HTC_Touch_Pro_English_UM.pdf
Quote:
To easily carry media and other files with you, you can use your device’s storage
card as a USB flash drive. Touch Start > Settings > Connections tab > USB to PC
and then select Disk Drive mode. This allows you to copy files from your computer
to the device’s storage card and vice versa faster.
Note You need to have a storage card installed on your device to be able to use your device
as a disk drive.
When Disk Drive mode is used:
You will not be able to use your device to access files from the storage card
or run applications that are installed on the storage card while the device is
connected to your PC.
Your PC will only connect to the device’s storage card. When you access your
device from the PC, you will only see the contents of the device’s storage card.
Remember to change back to ActiveSync mode when you need to synchronize
data between your device and your PC.
USB Host is different.
Mechanicaldan said:
I just read through the US user manual and Section 1.13 Using you Device as a USB Drive. http://member.america.htc.com/downl...al/HTC_Touch_Pro/HTC_Touch_Pro_English_UM.pdf
Quote:
To easily carry media and other files with you, you can use your device’s storage
card as a USB flash drive. Touch Start > Settings > Connections tab > USB to PC
and then select Disk Drive mode. This allows you to copy files from your computer
to the device’s storage card and vice versa faster.
Note You need to have a storage card installed on your device to be able to use your device
as a disk drive.
When Disk Drive mode is used:
You will not be able to use your device to access files from the storage card
or run applications that are installed on the storage card while the device is
connected to your PC.
Your PC will only connect to the device’s storage card. When you access your
device from the PC, you will only see the contents of the device’s storage card.
Remember to change back to ActiveSync mode when you need to synchronize
data between your device and your PC.
Click to expand...
Click to collapse
Sorry to dissapoint you, but this is just the other way arround. This enables you to use your phone as a flash drive from a PC. In this thread they want to access a flash drive (USB stick/HD etc) from their phone

[Q] Stupid questions thread 2

Thought I'd start a second thread since the first stupid questions thread is already forty something pages long.
USB storage -- is that just being able to access the SD card from the computer via the USB cable when the phone is booted up, being able to read off a USB flash card from the phone, or being able to access the computer from the phone via the USB cable?
I haven't heard of the third thing but I read about some tablets being able to read USB flash drives.
I read more of the original stupid questions thread and it is really good. Maybe the monitors can close this thread. Sorry.
nazcalito said:
USB storage -- is that just being able to access the SD card from the computer via the USB cable when the phone is booted up, being able to read off a USB flash card from the phone, or being able to access the computer from the phone via the USB cable?
I haven't heard of the third thing but I read about some tablets being able to read USB flash drives.
Click to expand...
Click to collapse
I would say "USB storage" is accessed when the phone is connected to the computer as a "mass storage device" giving access to read or write on the sd card no matter the state of the device.
As for accessing the computer from the phone I don't think this would qualify or that there are any apps that support this type of connection via USB. I do use apps to access my computer via wifi for file transfer and mouse/keyboard control but don't sewer the point either with a USB connection. Realistically if your phone is connected to the computer you are in a close enough proximity to just use the computer unless you have a really really really long USB cord.

[Q] Mass Storage doesn't work after OTA JB and Rootkeeper

So I finally got my phone and went through the rooting process, I have root and I'm on JB, I triple checked, but I put my Titanium backup folder on my old SD card which before updating I could access on my new phone, but now I can't seem to get to pull it up. I keep getting "Unfortunately, com.motorola.huxvmm.settings has stopped when I choose the storage option in settings. I also can't get my phone to show up as a removable drive to drop the files onto the internal memory. Besides that everything seems fine, any ideas?
USB mass storage option was removed in jelly been. It sucks.
g1701gst said:
USB mass storage option was removed in jelly been. It sucks.
Click to expand...
Click to collapse
+1 :good:
You could try one of the apk'(s even here on XDA putting a widget on and having mass storage (USBMassStorageToggle, Multi-mount-sd), but since I've lost root (sigh....) when passing the OTA, I can't tell if that actually works....
They switched to MTP mode as it is more secure (something about allowing the app storage and user storage to be the same to increase memory) and allows the device and PC to have access to the memory at the same time.
Borderpatrol1987 said:
They switched to MTP mode as it is more secure (something about allowing the app storage and user storage to be the same to increase memory) and allows the device and PC to have access to the memory at the same time.
Click to expand...
Click to collapse
MTP is supposed to be compatible with the USB spec, but there seems to be a problem for some/lots of users: When you plug in and select MTP, the phone mounts under "Portable Devices" (not "Devices with Removable Storage") like it used to in the past. This in itself is not a big deal, but the issue seems to be that though you can navigate to "Internal Storage" in Windows--that corresponds to /storage/sdcard0 on the phone (at least, mine)--some files on your phone may not be visible on your computer.
For example, I can create a folder in Windows in Internal Storage and see it on my phone, but if I delete that folder from my phone, it doesn't "sync" that delete to the computer.
I've made sure I have the latest Motorola drivers, and tried different USB cables, etc.
The fix I use is a bit complicated, but it works for me: I downloaded Total Commander (TC) on my phone, but I suspect you can do this with any other Android software that allows you to connect to a shared folder on your computer once connected to a USB.
In my case, I did the following:
On my computer, shared the folder, C:\Temp
in TC (on my phone), used the LAN (windows Network) Plugin to connect to that shared folder
Copied files from my phone to the shared folder on my computer
Great job. I've been using total commander too. It's the best and the fastest file manager I know. It has much more functions than (known from Linux) midnight commander.
Well worth the money with plenty plugins. Download shareware version from ghisler.com
Also there is a plugin for web dav too.
Sent via RAZR Max's HD

Flash Support for Non-Supported USB OTG Devices

Noobie question here. Is there any way to transfer files to and from directly to flash if the phone you have DOES NOT have USB OTG support? No PC in the mix, just a flash, cable adaptor and phone itself. If so, is it possible to do it without rooting? I've tried the PNY Duo-Link as well, without success (r/w from the laptop, phone does nothing). See I prefer to have the flash as my main datastore, independent of internet transfer and local to the PC, laptop, phone, etc.
Recently purchased a Verizon LG Transpyre, Model Number: VS810PP. The closest solution I've found is WiFi File transfer. However, I want to take the PC out of the equation (don't run M$) for the driver:
http://androidxda.com/download-lg-usb-drivers
Any help would be appreciated, maybe I should have gone the Moto E?
Wifi File Transfer does require not only Mobile Hotspot, but Mobile data too ;( You get an ugly Verizon subscription message with Mobile data even though you want to tranfer from YOUR PC to YOUR flash. Still a lot of hassle to go through though all you want is a non USB OTG phone to flash.
I can use bidirectional transfers via a miniUSB to USB cable on the Transpyre, but the flash isnt there. Had a talk with Sandisk technical support about non USB OTG solutions they may have for file transfers. Basically with OTG (MTP) only Microsoft supported scenarios work to a PC, there are no flash options and to to try Amazon. Bottom-line is, according to them, is if you have a non USB OTG phone, your only option is a SD option.
I just like everything I have on one media i.e. not multiple, SD, CD, flash etc. On top of that I want a bootable media. What would fit the bill would be a male SDmini cable into the phones slot to a female USB adapter for the flash drive, I dont think thats possible. So, some sort of SD adapter for the non USB OTG device is all I can come up with. What do others use for their main bootable datastore media for the phone, PC, Stereo, etc. i.e. the flash drive, SD, SD to USB adapter, DVD, etc.? Or should I just throw the phone and get a USB OTG one
Now the question is bootable SDCard vs USB for all around bootable media for storage to any device. This is what I did, almost there...
Bought a neat little kit from Walmart, Mobile Junkie's 3-in-1 mobile Kit. Basically, I took it's miniSD stuck it in my phone. I can use a miniUSB toUSB cable to the PC and pull the miniSD when I want and slide it into the kit's USB for the PC or booting. Getting close to all the functionality I want other than it's a pain to open up the phone and the bootable USB image I have did not work on the miniSD. The kit also has a regular SD, i.e. miniSD > USB > SD. Not sure if this type of USB/miniSD connection is bootable. But I think all I need to do is create a bootable to the miniSD from the PC.
Any experiences out there between bootable USB's vs SD's?
Conclusion - I'll never buy a phone again without USB OTG support.

anybody tries Usb otg

Hi, has anybody tried usb otg used with other usb type c phones.
I am wanting to know If anybody has transferred data between usbtype c hard drive and the Honor 8 phone without the need of laptop don't want to buy another hard drive but with type c if it won't work with the phone.
I have no clue why it won't work maybe Honor not put software in for it but just want to see if any body done it if so is it easy what's transfer speed like ..
Etc..
Thanks guys
Yeah,
I had a USB Type-C Male to USB 3.0 Type-A female adapter. Plugged in a USB 3.0 Toshiba Hard Drive and it worked. Notification popped up and I was able to use it in the built in file manager.
Works very well and is very fast as well.
That's good, official support of otg
Muhdol said:
Yeah,
I had a USB Type-C Male to USB 3.0 Type-A female adapter. Plugged in a USB 3.0 Toshiba Hard Drive and it worked. Notification popped up and I was able to use it in the built in file manager.
Works very well and is very fast as well.
Click to expand...
Click to collapse
1. Didn't work for me
2. What theme is that?
kingkea said:
1. Didn't work for me
2. What theme is that?
Click to expand...
Click to collapse
It's called Material VUi , it's available on the Honor 8's XDA forums under themes.
http://forum.xda-developers.com/honor-8/themes/theme-material-vui-material-design-t3441165
Link to the thread.
Otg works for me plus microsd, awesome
I don't find my self using otg if I had sd card expansion
Honor 8 supports USB OTG.
Refer the document given for further reference on its usage.
Official Honor 8 USB OTG Document Link - https://community.hihonor.com/docs/DOC-1613
Here are some steps you can take to transfer files from your phone to an external device or microSD.
Connect a USB OTG cable to your phone to access data on USB flash drives, card readers and other storage devices.
- Connect your phone to a USB flash drive with a USB OTG cable.
- Touch [click to enlarge] > Local > USB drive to browse data on the flash drive. You can select and copy data to a destination folder. For more information, see Copying, moving, or deleting files.
- When you have finished browsing, touch Settings > Advanced settings > Memory & storage > USB drive > Eject.
Disconnect the USB OTG cable from your phone and the USB flash drive. (NS)
Stock ROM (not rooted): Huawei built-in Files works very well for OTG USB flash drives. However, if you have X-Plore File Manager installed, do NOT accept the message as shown (see he attached), otherwise USB drive will disappear and neither the Huawei's Files nor X-Plore would be able to access the USB drive. If you ignore that message or "Cancel" it, X-Plore would be able to read USB drive but not write to it.
The same here
I wonder if there is any relation between emui5 "android" and the service activation

Categories

Resources