Hey there,
Has anyone found an in-car holder for the Trinity that meets the following criteria:
1) Charger
2) Speaker
3) Windscreen suction mount
4) (Nice to have) A snug fit rather than spring loaded
Any suggestions?
The closest I have found so far is this but it doesn't have a speaker or this but they appear to cater for just about every device except the P3600.
Any suggestions gratefully received.
Cheers.
Folks,
I just ordered a HTC P3600 to replace my beloved Magician (Qtek S100).
Anyone knows if I can still use my Brodit Car Cradle with charger?
Would my Desktop cradle work also?
Both devices seem to be very similar in dimensions.
if the connector is the same
and the device fit then yes
i used my wallaby(xda1) cradle with my himalaya without any probs
Unfortunately the position of the usb connector differs.
If you got a passive brodit holder you can use it for both devices.
I bought a new brodit active holder for my HTC3600.
The backside of my Vox is showing bubbles on one edge after just 1 month. I usually treat my gadgets very carefully.
Anyone experiencing the same problem?
Does anyone know an online source shipping to USA or Germany where I can get a new battery cover for the Vox?
Regards,
Henrik
that looks like from some heat to me ... can`t help sorry
Try HTC Europe website, they have S710 battery covers in there online shop.
Roland
Rolandh said:
Try HTC Europe website, they have S710 battery covers in there online shop.
Roland
Click to expand...
Click to collapse
Thanks for the info! They indeed carry the battery cover. EUR 34,93 incl shipping for a battery cover is a little pricy though?
Does anyone have any experience whether warranty would cover this?
So i spot today this . Well its rubber covered plastic so my result is HTC vox material it`s bit crap like those rubber cover for usb and a card
Hi,
anyone can recommend bicycle mount for HTC Diamond, which could be used for aggressive or extreme bicycle riding?
Thank you,
tampiss
i would be quite interested in that!
just found those h-richter and krusell things, but they don't look like much. they seem to be not so stable, and i would like a case/bag with window wrapped around it...
if anybody finds it, tell us please!
HTC Touch Diamond Waterproof Case
HTC Touch Diamond Watertight Case
You can modify the case with screws or double sided adhesive tape with the (Adapt, Hr and Krussel) bicycle mounts.
Hi,
The only problem with a bike mount is lack of waterproofing.
I use a Boxit 5.1 case which I cable tie to the stem. The diamond fits into it well using the adapters that come with it and it is totally waterproof. An original MDA Compact a Prophet and a MDA Compact 3 have all survived the Scottish wilds in this case.
Here is a pic of it with the Prophet.
The cases from thepocketsolution.com seem to be repacked Otterbox cases www.otterbox.com . The first one, also known as Otterbox 2600 is not suited for the diamond. This is due to the way the screen membrane is hold on its place. The second one also known as Otterbox 1900, will do the job perfectly but is a bit bulky for the diamond. Another great solution will be the Ram Aquabox 3. You can find it on www.ram-mount.com.
spangelsaregreat said:
Hi,
The only problem with a bike mount is lack of waterproofing.
I use a Boxit 5.1 case which I cable tie to the stem. The diamond fits into it well using the adapters that come with it and it is totally waterproof. An original MDA Compact a Prophet and a MDA Compact 3 have all survived the Scottish wilds in this case.
Here is a pic of it with the Prophet.
Click to expand...
Click to collapse
Can you still use the touch screen through this case???
Do you have any pictures of the Diamond in the case so i can see how it fits???
Steve
Hi all,
i just found this:
http://www.monav24.de/rrohling/rammountfuerpda5
http://www.monav24.de/rrohling/rammountfuerpda4
here:
http://cgi.ebay.de/RamMount-Ram-Mou...9|66:2|65:12|39:1|240:1318|301:0|293:1|294:50
this is a ram mount setup, but i don't know where to buy the diamond holder. If you find it through these links, please let me know.
Steve,
Here are some photos with the Touch Diamond (MDA Compact IV).
You can access the touch screen to a certain extent. However, near to the bottom where the opening is the membrane slopes away from the phone making it difficult to operate the screen. You could probably shim the back of the phone with some foam or similar to push it up towards the membrane to reduce this problem.
Regards
spangelsaregreat said:
Steve,
Here are some photos with the Touch Diamond (MDA Compact IV).
You can access the touch screen to a certain extent. However, near to the bottom where the opening is the membrane slopes away from the phone making it difficult to operate the screen. You could probably shim the back of the phone with some foam or similar to push it up towards the membrane to reduce this problem.
Regards
Click to expand...
Click to collapse
Many thanks for the photos I am going to use it on my motorbike but its the same idea.
I was on the Boxit website and they have there phones in the case the other way up is there and reason you have yours in this way round???
Steve
Steve,
It is only on that way because the other way round it stops me mounting my Lumicycle lamps properly.
I have one on my mountainbike that is the "right" way round.
Regards
Boxit 5.1
Hi there,
I like the boxit 5.1 you are using, is it the tall or short version?
I'm about to get one from chain reaction cycles but don't want to get the wrong one.
Looking at the dim's on chainreaction...
Model Internal Size External Size
Small Lid 118 x 56 x 28mm (int)
128 x 71 x 42mm (ext)
Tall Lid 132 x 56 x 28mm
144 x 71 x 42mm
I guess the small lid model will fit the diamond... I hope.
Did it fit?
Im about to buy such a case as well...
don't know
nickokio said:
Did it fit?
Im about to buy such a case as well...
Click to expand...
Click to collapse
Sorry, I didn't buy it, for $30 I bought a bike computer.
I use my diamond to gps map some routes, but I just put it in a ziploc bag in my camelback.
Hmm allrite too bad
Maybe someone else who can reply?
I decided to crash last weekend in Winterberg, test my helmet en break my old el cheapo phone holder. Now looking for a replacement.
Well wanted to tell yall that ive bought the small version and that is fits perfectly on my mtb and suits the diamond well (even with 2000mah battery)
great
hey thats great news. thnks 4 letting us know.
can you post a pic too?
Pictures Holder
Yeah offcourz, it looks great
Here are some pics, taken with iPhone 3GS
Hi guys... how do you manage the Diamond to last the entire MTB run? I use the great GPSCycleComputer with map downloading (HSDPA) and I run out of battery in about 1,5 hours.
I was thinking in buying a high capacity battery (I've seen 2400 mAh) but they wouldn't fit in a standard holder because they are thicker. So, by now I'm wearing it in my back pocket.
I'm currently using a Herbert Richter mount... So I can move between car and bike with the same phone holder.
Plus I can keep the car and bike mount when I change my phone!
Very, very good German quality products!
Just as shame they don't do a waterproof holder... so I can only use my holder in good weather.
If they did one, I'd buy it straight away!
Hello,
I search a excellent car holder, find some, but what is the best for our DHD?!
I found this (HTC Official):
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=205737
http://www.mobilefun.co.uk/htc-desire-hd-car-upgrade-kit-cu-s440-p26731.htm
http://www.youtube.com/watch?v=pNCFXaQigHI
Another one (Herbert Richter):
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=207403
http://www.holdersandmounts.co.uk/h...dscreen-suction-mount-by-herbert-richter.html
http://hemorrdroids.net/htc-desire-hd-herbert-richter-banana-mount/
Others with Combo (Brodit + Herbert Richter):
http://www.holdersandmounts.co.uk/htc-desire-hd-brodit-holder-herbert-richter-mount-combo-1700.html
http://www.holdersandmounts.co.uk/htc-desire-hd-brodit-holder-herbert-richter-mount-combo-1525.html
For users with protective cases:
http://www.holdersandmounts.co.uk/h...suction-mount-and-universal-holder-combo.html
Thanks!
Regards
I bought this car vent mount on eBay and I'm very satisfied with it:
http://cgi.ebay.nl/ws/eBayISAPI.dll?ViewItem&item=220698226552&ssPageName=ADME:B:EOIBSA:NL:1123
Is that TomTom installed on that Desire HD on the mobilefun link.
I thought there is no TomTom available for android
Can someone please recommend a Car holder that fits with the OtterBox Commuter for the DHD ?
Thanks.
Clingo air vent holder is cool... I have one in each car!
Sent from my Desire HD using XDA App
Hi onlytests
You have a lot of links, but IMO you are missing the the link to the best which is DSL Developments | Brodit ProClip
Take Care
TheQuest
If you are look for an active Car Holder. I bought this:
http://www.mugen-power-batteries.co...esire-hd-car-mount-cradle-with-handsfree.html
But i opend the Holder (with a screw driver) and removed the Audio Plug because I'm using Bluetooth Headset.
Now I'm happy with it.