hi all
i use a mda2 from t-mobile austria. i updated with a german rom (1.60.00GER, ext.rom 1.60.07)
my problem is the following:
when i add a new contact, the standard country is "deutschland" and not "austria / Österreich" even though i changed my country settings to "Deutsch (Österreich)".
this is very annoying because i have to change that parameter to "Österreich" every time. how can i change that to become "Österreich" for default (maybe with a reg hack)
thanks for your help
servus ize|man
have you set the right country in locolize settings in system ?
sure i did (as written in my post
that was the first thing i tried....
anyone got any more ideas ???
servus ize|man
In the contacts:
Tap on Tools -> Options and voila you can set your default country.
suc6
Related
Dear All,
I have a English Dodop 818 pro (HTC prophet). I have set my machine "Regional settings" to "English (United States) as Hong Kong is not available on the list. However I found this setting will turn on the autoformating for the phone number on the contact list to (xxx) xxx-xxxx which is not suitable to where i live.
I just wonder if there anyway to make a new entry to the Regional setting and/or there are any reg edit to turn off the autoformating? Thanks.
Elton
you can do like what i did and change the settings to english (australia) i would love to know how to do an autoconfig hack as well though.
well , my work around is to change the setting to UK instead of USA. But then it is only a work around.
Since I had severe problems getting the swedish characters to work after upgrading to WM6 (Pandora 3.2) I thought I'd provide the other swedes here with my sollution.
For the hardware keyboard:
Open a registry editor and locate
HKCU >> ControlPanel >> Keybd
Change the string from 0409 to 0414 and save.
Turn the wizard off by using the power button. Do no soft reset. If you soft reset sometimes the registry is not saved.
Turn the wizard on. You should now have swedish characters.
The value 0409 is for english. I could not get it to work by replacing it with 041d which is the code for Swedish according to Microsoft (all country codes can be found here http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx )
However, one user in the forum used 0414 which is really Norwegian_Bokmal but they also use å, ä and ö. Tested this and it worked.
Some threads tell you to also change the value in two other places:
HKCU >> keyboard layout >> Preload >> 1 >> Default and
HKCU >> keyboard layout >> Preload >> Default
Do not change these settings. It will do nothing except disabling the auto complete function. I also encountered problems starting the wizard after changing these settings.
To get swedish characters on the onscreen keyboard I installed SkandinaviskTastatur5 which can be found here:
http://forum.xda-developers.com/showpost.php?p=1150091&postcount=97
Hope this helps!
thanks.
Good job.
Just helped a friend.
Daniel
I dont understand how to change the langue on the harwere keyboard, plz help me!! // Michael
Tackar! Usally I use Registry Wizard for this, but with this method I don't have to install any 3:d-part programs
Perfekt!
Tack för hjälpen
Didnt work for me.
I tryed this at my Kaister with 6.1 but it didnt work. did try both 0414 and 041d.
For the hardware keyboard the only way I've ever got it to work is by using a proggie called "skandinavisk tastatur". Comes as a .cab- just install and it lets you choose which nordic keyboard layout to use. It's a bit tricky to track down (I think it is freeware though), but nothing half an hour on google will fix
Carrotcake said:
For the hardware keyboard the only way I've ever got it to work is by using a proggie called "skandinavisk tastatur". Comes as a .cab- just install and it lets you choose which nordic keyboard layout to use. It's a bit tricky to track down (I think it is freeware though), but nothing half an hour on google will fix
Click to expand...
Click to collapse
About 30sec google, here you go: http://www.idedata.no/programmer/progredirector.asp?ID=581&type=mips
But I like the sulotion in the first post more
Thank you so much for the information, I've been looking for a way to get Scandic letters working for quite some time now. Finally I can use my Wizard normally.
I can also confirm that this works for Finnish. As stated in the first post, just navigate to HKCU - ControlPanel - Keybd and change "Locale" to "0414", hard restart via the power button and you're done.
HEJ
JaX3RiR said:
Thank you so much for the information, I've been looking for a way to get Scandic letters working for quite some time now. Finally I can use my Wizard normally.
I can also confirm that this works for Finnish. As stated in the first post, just navigate to HKCU - ControlPanel - Keybd and change "Locale" to "0414", hard restart via the power button and you're done.
Click to expand...
Click to collapse
in fact, i suggest you to use the EZIMPUT from cracing, there is swedish as well.
i have a wizard with swedish characters on keyboard, if you want i can take a shot and send via email to you, so you can easily figure how to "design2 the characters on your keyboards....
Jag kan inte pråta på svensk, med jag vill hjelp (hope is the correct way to write in swedish)
Vi ses
--------------------------------------------------------------------------------
Dears,
I have a problem whenever someone calls me i can't see the contact name even though in my contacts..
My Regional Settings are set to English (UK) as i do on all my WM machines.
Didn't have the problem with the original ROM (Latest HTC WM6.1 ROM) my country code is +961 and the dial sequence is as per below:
+961 (a) xxx-xxx
When someone is dialling it is showing (a) xxx-xxx. Anyone have any idea what setting should be changed to enable name viewing inside of the dialler?
Also noticed in case i dial a number 0(a) xxx-xxx the name does not pop-up but in case i dial 00961 (a) xxx-xxx the name comes up.
My Current ROm and Radio Version are as per below:
ROM: 3.18.931aCS WWE
Radio Version: 1.59.42.15
I think the problem is with the Registry, any Help will be great....
Cheers,
Jack
Solution........
Hey guys found the solution, edit the phone WM6 registry, with a registry editor (you can download a freeware version anywhere).
Edit this register:
Record:
HKCU\ControlPanel\Phone\CallIDMatch
When you find it, change the decimal value from 8 to the desired number: eg 7 in my case.
Hi there..
I know I can install a single language with a t9 cab file. But what I need is installing many languages in a single go. They are used on the Imate SPL.
I have quite a few Imate SPL phones to sell and installing single languages takes a lot of my time, so a single big file would save me trouble. I could install all languages seperately with Active Sync, but then I need something that can adjust the registry so that they are all available from the t9 menu, now only the last one installed shows.
I use all the languages from this page, from Czech to Turkish (no Chinese)
http://melgurth.ovh.org/index.php?page=downloads
Only for Portuguese I use another one, because the one from the page doesn't work. I use this one:
http://rapidshare.com/files/71913751/t9_Eng-Portug.rar
Of course I don't want to be a free rider, so the first to make me a fully working multi language .cab file or a proper registry edit thingy gets $100!
Maybe it already exists, well that is also worth it to me, let me know please.
adriaanb said:
Hi there..
I know I can install a single language with a t9 cab file. But what I need is installing many languages in a single go. They are used on the Imate SPL.
I have quite a few Imate SPL phones to sell and installing single languages takes a lot of my time, so a single big file would save me trouble. I could install all languages seperately with Active Sync, but then I need something that can adjust the registry so that they are all available from the t9 menu, now only the last one installed shows.
I use all the languages from this page, from Czech to Turkish (no Chinese)
http://melgurth.ovh.org/index.php?page=downloads
Only for Portuguese I use another one, because the one from the page doesn't work. I use this one:
http://rapidshare.com/files/71913751/t9_Eng-Portug.rar
Of course I don't want to be a free rider, so the first to make me a fully working multi language .cab file or a proper registry edit thingy gets $100!
Maybe it already exists, well that is also worth it to me, let me know please.
Click to expand...
Click to collapse
i dont think this is a problem
or you may chang your ROM,this is a better way
add input changer in your settings, cpl.xml control it
Find what`s difference in the cab:
reg:
[HKEY_LOCAL_MACHINE\T9 Input Method\IME]
"0400"="t9AW.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method]
"Current IME"="0400"
"Current LDB"="0405"
"Default Alpha LDB"="0405"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Ime File"="T9Ime.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\LDBs]
"0405"="T9CzechLdb.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\LDBS]
"0405"="t9 Czech"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\Languages]
"Available"="0405"
you can chang it to:
[HKEY_LOCAL_MACHINE\T9 Input Method\IME]
"0400"="t9AW.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\0405]
"Current IME"="0400"
"Current LDB"="0405"
"Default Alpha LDB"="0405"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Ime File"="T9Ime.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\LDBs\0405]
"0405"="T9CzechLdb.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\LDBS\0405]
"0405"="t9 Czech"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\Languages\0405]
"Available"="0405"
and other reg
.....
.....
FILES:
t9 czech.cab:
T9AW.dll 47kb
T9AWEngine.dll 154KB
T9IME.dll 82kb
T9ImeRes.dll 10kb
T9imePrefs.dll 29kb
T9CzechLdb.dll 122kb
T9ImeRes.Dll.0405.mui 11kb
t9 Danish.cab:
T9AW.dll 47kb
T9AWEngine.dll 154KB
T9IME.dll 82kb
T9ImeRes.dll 10kb
T9imePrefs.dll 29kb
T9DanishLdb.dll
T9Imeres.Dll.0406.mui
t9 English.cab
t9 Portuguese.cab
.....
.....
you see,just the two files are different
or you can send me a ROM you use,i will try..
Easy
lovebabyjing said:
i dont think this is a problem
Click to expand...
Click to collapse
Thats true!
If he really give 100 US$ to that person who did that 30min work that would be a easy earned money! ;o)
If you want to - I can do it for you!
As for the subject..
Situation: My phone is Mozart (Singapore version 728)
i run the regedit on the version 7392 on the phone.
And i enter the key:040C(french).. then update to version 7403-7712
but the display language French didn't appear in the display Lan option..
i've tried for several time.. but failed all the time.
Then i doubt that is about the restriction of the operator.
But i can add the Lan"Greece" .-0408...so ..
Is there anyone can help me go through this problem?
I don't know if I understand correctly - you want to have French on the phone? French is native in the system without changing the registry, so what language you want ?
So I looked for the table: http://msdn.microsoft.com/en-us/library/ms776294.aspx and seems to value registry 040C is not supported by Microsoft for French is 080C.
well man ... tks for your info..
080C....
And the sys language is US English...
so that i must modify the value myself..