My Xda/Qtek's charging slot is loose or bent and as such I am now not able to charge it or synchronise at all. Brought to the repair shop and was told that I need to change the whole mother board as the slot is attached
to the board and it is as good as getting another one than to fix it. Seems to me that the 2 pins in the centre or the slot is bent and I cannot get the connection on when I plug the charger in unless I twist the charger to one side I then get the yellow/orange light which indicate charging.
Appreciate if someone could help fix it. Cheers.
The charging socket is part of the mainboard, I have had this in the past with ipaqs, I got a jewellers eyepiece and a very slim pin and managed to get them lined up again, I am sure there was a post today about this very problem.
Thanks for info. I managed to strip apaart the xda and then soldered the
loose charging slot. It works fine now and I save having to pay for the replacement of the main board which is not worth it and also the service
costs.
help for newbie pls?
Hi, I currently have the same problem. I also want to try the solution that cruisin-thu suggested, unfortunately, I'm not much of a techie and I'm afraid that I might damage the mainboard if I don't know which parts to move. Does anyone know of any sites that have a picture of the xda II mainboard? I'd really appreciate the help.
Related
Any hadware pro`s out there?
Somehow I have managed to damage the contact strip on the bottom of the phone. It will not charge in the cradle, but the battery charges in the cradle. Sync using the cradle is OK. I think it needs a new connector strip. Does anyone know if this is a "beyond economical repair" type of problem, or have any ideas how to approach this. I could take it to an O2 shop for a quote, but that may take weeks, and besides its an unlocked phone, and they might not be 2 impressed!!!
Thanks,
Justin
I had the same problem. Sent it to the XDA service centre
they said it wasn't covered by the waranty
Cost about £70 to get it repaired
tel 0808 100 3427
Thanks
just found out £104
I also have the same problem mate. Not quite sure how I bent it though.
I managed a small repair, but I still have to angle the charger slightly to get it on. Everything still works for at the moment, so I don't think that I will get it repaired.
Nearly forgot, this is my first post so hello to everyone!
i had the same problem
they have send it away (where i bought it (camera/phone shop) ) and i got a new motherboard
fixed now
for anyone searching the forums
http://forum.xda-developers.com/viewtopic.php?p=146805&highlight=#146805
I have replaced my Connector with a usb socket
wow!
This is really amazing! Planning to 2 it with mi BA.
Hope it works... :roll:
now if only one of those bad boys carried an audio signal we'd be in business for a nice car docking station!
Morning forum,
My wife has a Nexus S and the USB port is broken. I can see on the inside of the socket the wires are mashed. Basically I can't charge the phone anymore. Does anyone have any ideas on how I could either fix it, or another way to charge the battery short of getting another Nexus S to charge the battery? It is also out of warranty to I would have to pay to get it fixed. That is going to be my ultimate solution but I would rather look at other ways first. Cash is tight.
Shawn
Maybe buy just a battery charger, that can charge the battery without going through the phone.
I decided to take it apart on look at the socket. I have have a friend that works with micro-electronics to solder in a new usb port. I will get it back today all fixed up (I hope). Thanks for the advice. I did see options for that. Good backup plan.
strevellick said:
I decided to take it apart on look at the socket. I have have a friend that works with micro-electronics to solder in a new usb port. I will get it back today all fixed up (I hope). Thanks for the advice. I did see options for that. Good backup plan.
Click to expand...
Click to collapse
Did you manage to solder a new USB port? I have the same problem and wondered how difficult the repair is as I have ordered a replacement port from eBay. If you have fixed it please could you ask your friend to provide some tips on how to get the port off and on again.
Any help you can provide would be greatly appreciated
Thanks
Hi
I have major problem with my tablet and usb socket has been pried from board have taken a quick look at damage and a replacement or solder of new one is out of question and metal contacts on pcb has been damaged also.
I am wondering if anyone knows a way of bypassing so I can still charge.
Can I bypass the small circuit board where USB connector is and hard wire battery connections directly onto USB itself.
This tablet has always served me so well dont want to give up on it just yet as cant afford a new one.
Fairly confident with soldering etc just curious as to whether it will work and best way to wire it up
My HTC Sensation, has stopped charging altogether. I took it off charging and when i put it on 10 min later, the LED didnt light up, so i got a toothpick and tried cleaning thecharging port just in case something tiny went in and was blocking it to charge, but that didnt work. The phone was working fine until the battery died and i still cant get it to charge. Now im wondering whats broken, to all those repair specialists out there, what could be broken? I can buy a charging port from ebay, but is that it? or could it be anything else.
I was looking to upgrade soon but was waiting for some christmas deals to pop up, but my phone decided to let me down.
Any help appreciated, thanks guys
webstar1 said:
My HTC Sensation, has stopped charging altogether. I took it off charging and when i put it on 10 min later, the LED didnt light up, so i got a toothpick and tried cleaning thecharging port just in case something tiny went in and was blocking it to charge, but that didnt work. The phone was working fine until the battery died and i still cant get it to charge. Now im wondering whats broken, to all those repair specialists out there, what could be broken? I can buy a charging port from ebay, but is that it? or could it be anything else.
I was looking to upgrade soon but was waiting for some christmas deals to pop up, but my phone decided to let me down.
Any help appreciated, thanks guys
Click to expand...
Click to collapse
Did you solved the problem by buying a new phone?, the problem could be the USB connector himself, if you are very handy you can repair it yourself...
anomalic said:
Did you solved the problem by buying a new phone?, the problem could be the USB connector himself, if you are very handy you can repair it yourself...
Click to expand...
Click to collapse
maybe your battery died
I'm assuming you've got it fixed / moved on to a different phone / are using an external charger, but this thread got bumped to the top so I figured I'd chime in.
I had this problem as well. Unfortunately, the usb port is soldered on the board and not a separate unit attached via ribbon cable. The solder joint holding the port on the pcb cracked, resulting in a loose port. Over time, this lead to the pins breaking off the pcb. For a while, I was able to get it to charge by applying pressure to the usb plug. Finally, I took it apart and resoldered it, reinforcing the solder joints for the port itself. It's not too difficult if you use some flux. Just line up the pins and tack the port back on. Then rub flux over the pins and tack them with the soldering iron. No additional solder is needed or recommended-- the pins are in close proximity and it'd be easy to bridge them.
So before my xz premium completely stopped charging my phone used to randomly stop charging and charged very slow I used quick charge 3.0 and certified usb c cable I had to put the usb type c cable in a certain position to get my phone charging but after a while it completely stopped charging I inspected the port it was fine no bent nor broken cleaned the port but it didn’t charge after sometime I started messing with the phone so I found a way to charge it when I put pressure on the bottom of the phone from front and rear of phone where usb port and flex cable is connected it starts charging but I have to put a lot of pressure to get it to charging I don’t know about hardware so I am here If someone can guide me ty.
Is the charge manager enabled?
In this case the manager try to think at which time you disconneythe the phone from charger and stopped after a while to continue in front of disconnect (or what he think at which time it is)
No the charge manager or (Battery Care) is not enabled but I opened the device myself because I thought it might be a loose connection of charging port's flex cable but it was connected to the motherboard fine but the situation was the same I pressed the flex cable where it connects to the motherboard and the phone started charging I think it's some sort of motherboard problem as it happened with some other xz premium users as well.
P.S:Replacing the charging port didn't fixed the problem.
Hello,
I had a similar problem.
At first it only carried in certain positions or pressing the region where the flat connection. After 1 months it stopped completely.
My problem was in the motherboard charge connector, I needed to buy a new connector to replace with solder. After 30 days, everything continues to function normally.
Wawawagl said:
Hello,
I had a similar problem.
At first it only carried in certain positions or pressing the region where the flat connection. After 1 months it stopped completely.
My problem was in the motherboard charge connector, I needed to buy a new connector to replace with solder. After 30 days, everything continues to function normally.
Click to expand...
Click to collapse
Thank you very much that's the answer I was looking for one more thing can you guide where to buy the connecter for the motherboard and can you tell me how did you manage to replace it.
Update I just got mine fixed the btb connecter for the charging port on the motherboard was loose it needed to be resoldered in case it is more damaged you should get a new btb connecter I'll put the link to buy from link: https://rounded.com/sony-board-connector-btb-socket-2x10pin-1306-0093.html
can u guide me how to do it?
If u know any trusted and skilled repair person just tell him what the problem is and make sure the repair person fix it the right way as described otherwise he might end up damaging ur phone.
alrighty thankss, i'll update soonnn, i already change the port but it still the same
Hello, can you update me on this, i'm facing the same issue. Let me know if this fixed your problem.
yukikunn said:
alrighty thankss, i'll update soonnn, i already change the port but it still the same
Click to expand...
Click to collapse
Changing the port won't fix the issue it can only be resolved if u change the btb connector on the motherboard.
Anyone knowing how to do it?
Hi. Stripped phone down and removed old BtB connector. How do you solder the new part to the motherboard. Is it just the four corners you solder or do all x10 pins on each side need to be soldered?
Can somebody who has changed a BtB put a step by step guide if poss?
yukikunn said:
can u guide me how to do it?
Click to expand...
Click to collapse
ok update i've been trying to repair it/solder it in a couple 3rd repair (because there's no sony xperia service center here in indonesia..) and they say they can't, then i wen't to this repair shop (this one looks not promising) then i got a message after 3 day they say they can't repair it, i was hopeless, i left my phone there.., and after 1 and a half month i think, i finally went to get my phone, and when i arrives to get my phone they charge me 15$, in my head i was thinking "why they charge me? they didn't even fix it"
then the repair man said "we fix it" i was shock they didn't even message me and said it was fixed (they have to) so i pay the 15$ and check the phone its completely normal it's charging the fast charge work, but.. they reinstalled everything (factory reset) kinda strange.. but it's find ok so that's it