when i use my xda i click on mobile device in windows explorer and a load of file come up and i can browse all tht dir`s on the xda..
on the xda2 i click on it and nothing comes up...
so i cant axx the rings directory or anything else for that matter..
i can get into the my documents with the shortcut on the desktop but can find any other dir`s....
also i cant get the thing to dial up a isp using cellular oline... it just says no modem at above number (but i dont think its even dialing it!!!..
Please help as i want to add some ring and have a fiddle BUT CANT!!!.
T.I.A
M0rph
Check the ActiveSynch icon. If it is greyed, it means ur XDA2 is not synchronized/connected to ur computer.
It has to be "light green color" icon.
you its light green and if i double click "my pocket pc documents" from the desktop i can connect to the " My Documents" dir on the phone..
but when i click on the phone icon in explorer nothing comes up whereas on my old xda i used to have all the dirs inc windows and a load of others..
M0rph
I suffer from the same problem but mine is rather strange. I have an iMate with the latest firmware. My home PC runs Win XP.
On a clean reboot, I am able to access my iMate using Windows Explorer. However, if I pull my iMate off the cradle and put it back on later, Windows Explorer will show me a blank directory and no amount of refreshing will cure the problem! I have to REBOOT WINDOWS before it will see the files again!
I am most annoyed with Microsoft. I have been using Palm for the past 5 years and have never had a problem like this.
I've run across the same problem using any PDA device (i.e. not only XDA2/MDA2) running WM2003 and ActiveSync 3.7.1 on a WinXP machine. Suppose it's got something to do with the AS 3.7.1 and WinXP being used together as I'd never had similar issue with AS 3.x on the same PC. Moreover, all runs just fine even with ActiveSync 3.7.1 on a PC with Win98.
What helps to solve the problem for me is closing the open window previously used for browsing the PDA and then opening it again by either hitting the Explore button in the ActiveSync window or clicking the Mobile Device icon in My Computer.
PavelR.
Just so you guys know, I managed to fix the problem by uninstalling ActiveSync 3.7.1 and reinstalling AS 3.7.
I noticed a lot of these problems also go away if you close all open explorer windows on the XP machine and then retry. Some caching bug probably...
Related
I'm putting this under General because I don't think it's specific to any phone. I have the Sprint Mogul and updated to the 3.16 ROM. I've only done a few other tweaks and added HTC Home. My issue is everytime I connect/disconnect to my PC via USB, ActiveSync starts and then Windows Explorer opens. I don't know why Windows Explorer opens, but don't like it. Is there some way of turning this off?
ActiveSync opens Explorer too
Yes, I'm experiencing the same, but It looks like there is no hope. Another folk posted it in microsoft forum and someone called "help_line" gave some couple hints but couldn't figure out the problem and left us alone.
its probably some type of autorun.......
i would imagine it is computer side, not phone side.
Hehe this is an old windows problem. What happens is that a program tries to launch another program which is located in a folder containing spaces, such as "Program Files". The path to this program should be enclosed in quotation sign to avoid this problem. You need to fins out which program AS tries to open, find it in the registry and change it. For example if your path is this:
C:\Program Files\myprogram\foo.exe
change the string to
"C:\Program Files\myprogram\foo.exe"
I had the same problem and a search found the answer. It's in the registry on your PC somewhere. There's a setting about wehat the PC does when it detects a connection through ActiveSync (and another action for disconnecting). You have to delete those keys.
The Registry Key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\AutoStartOnConnect]
and
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\AutoStartOnDisconnect]
I deleted those keys and it stopped happening. I think something corrupts them. They re-appear later but without the problem.
Hope that helps.
ianpugh said:
I had the same problem and a search found the answer. It's in the registry on your PC somewhere. There's a setting about wehat the PC does when it detects a connection through ActiveSync (and another action for disconnecting). You have to delete those keys.
The Registry Key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\AutoStartOnConnect]
and
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\AutoStartOnDisconnect]
I deleted those keys and it stopped happening. I think something corrupts them. They re-appear later but without the problem.
Hope that helps.
Click to expand...
Click to collapse
This worked for me as well when I had the same issue.
Hi folks
I'm waiting on a nice shiny new Samsung Omnia arriving from my mobile provider, but in the meantime I'm still using my old HTC Trinity handset... and have managed to break the screen on it. I'd love to recover my data, but ActiveSync hasn't managed to get my contacts into Outlook and I don't think it can get my SMS.
Any ideas on how I can recover my data, preferably in a way that I can then put it onto the new Omnia when it arrives?
Thanks in advance for help everyone!
Uso SOTI controller or whatever it's called to see the PPC screen on the PC screen. Navigate using PC mouse etc.
HTH
Joe
joebongo said:
Uso SOTI controller or whatever it's called to see the PPC screen on the PC screen. Navigate using PC mouse etc.
HTH
Joe
Click to expand...
Click to collapse
QFT. Use SOTI Pocket Controller (which you can download a trial for free from SOTI's website) and you can control your PPC on your PC's screen.
^^ What they said, but use MyMobiler (which is free forever ) from here.
Also you should be able to use ActiveSync/Explore to install DotFred's PPCPimBackup (here) - it's just an .EXE you need to copy somewhere on your Trinity, then run it (using the MyMobiler screen to guide you) and backup all your contacts and SMS messages (and calendar, tasks etc. if you wish) - if you have a lot of contacts/messages, make sure you un-tick the "use memory for temporary files" option.
The resultant backup file can then be copied back to your desktop PC and you can perform the reverse operation - with or without the help of MyMobiler - when your Omnia arrives.
Cheers,
Mark.
I am in the same situation.
I had an Eten device before and now have a Diamond.
The problem is that the screen is broken and most (all ?) of the controlling apps need a software PPC-side, and without screen it's quite hard to install.
As long as MyMobiler can establish an ActiveSync-type connection with the phone (i.e. if you've got the phone and PC connected via A/S) you'll be fine - MyMobiler will install the software on the phone itself....I don't even think it asks any questions.
Mark.
Mark Crouch said:
^^ What they said, but use MyMobiler (which is free forever ) from here.
Also you should be able to use ActiveSync/Explore to install DotFred's PPCPimBackup (here) - it's just an .EXE you need to copy somewhere on your Trinity, then run it (using the MyMobiler screen to guide you) and backup all your contacts and SMS messages (and calendar, tasks etc. if you wish) - if you have a lot of contacts/messages, make sure you un-tick the "use memory for temporary files" option.
The resultant backup file can then be copied back to your desktop PC and you can perform the reverse operation - with or without the help of MyMobiler - when your Omnia arrives.
Cheers,
Mark.
Click to expand...
Click to collapse
Thanks, I'd not heard of MyMobiler but I just downloaded it and it connects to my phone quickly and automatically without even having to set it up in the first place. Nice one.
Hi. I accidently cracked the screen on my s740 and now i need to extract my sms from the phone. I have already installed my mobile, but the damn program doesent seem to work. I have win xp, but when the phone syncs to my computer, my mobile says: "Not connected" -> "Connecting" -> "Running on your mobile" -> "Not conneted".
It is slow as hell and doesent respond in windows, it doesnt seem to be able to connect to my phone.
So, here is the deal, my screen is busted, and i have a very important sms in my phone that i HAVE to extract from the phone.
So, can i copy some file from the phone, containing all the smses and then extract in windows on my computer? If not, how am i supposed to do? PIM Backup can only be run on the phone and my screen is cracked.
Please HELP!
IT IS URGENT!
3600 said:
Hi. I accidently cracked the screen on my s740 and now i need to extract my sms from the phone. I have already installed my mobile, but the damn program doesent seem to work. I have win xp, but when the phone syncs to my computer, my mobile says: "Not connected" -> "Connecting" -> "Running on your mobile" -> "Not conneted".
It is slow as hell and doesent respond in windows, it doesnt seem to be able to connect to my phone.
So, here is the deal, my screen is busted, and i have a very important sms in my phone that i HAVE to extract from the phone.
So, can i copy some file from the phone, containing all the smses and then extract in windows on my computer? If not, how am i supposed to do? PIM Backup can only be run on the phone and my screen is cracked.
Please HELP!
IT IS URGENT!
Click to expand...
Click to collapse
Try this...right click on the my mobiler icon in your pc's taskbar, choose "configure mobile", then "install". Sometimes I've had to manually force that step to get it to allow connection.
EDIT: also, is it making a solid activesync connection to begin with?
Reviving an old thread
What happens if I can't make an activesync connection? I think at some point I disabled the auto-connect on the phone and now it may require my input to connect.
(Its an elfin with one of the latest onyx roms)
Hi all,
i am really very disappointed, already spent around 12 hours looking for a solution,
the WMDC does not run at all on my Vista machine which is Business 32-bit,
i tried to uninstall, install again, reboot, more than 20 times, with no luck
this is making me creazy, i couldn't find someone suffered the same
please help me, i am willing even to pay for this help
regards,
sounds like a corrupt vista install I would reinstall or restore it back to default
how to confirm its vista
Hi..
thanks for your post?
how did you confirm that its vista issue,
could i just put the vista CD and ask to rebuild?
will it remove my files on the system
yes itll delete everything
my advice would be to get 7
"i couldn't find someone suffered the same"
was a bit of a give away
you could try another vista computer to verify
or if you're using usb you could try using bluetooth and virsa versa
personally I never had any problems with vista wmdc
its not showing the interface
my home vista machine is working fine,
my machine, is not, its not yet about connecting my mobile,
the software it self is not showing,
i install it, without any error msg, it shows in the start menu, and in the programs of control panel,
but when i click on the icon in the start menu, nothing show at all,
i belive it should show the interface even if the mobile is not connected yet,
acctually it shows ew devices
hi.
it shows new devices as unknown device then the driver couldn't be found
if it's a work computer they prob just removed the rights of installing new hardware
from your user account
i tried both with my user which is part of the administrators group, and also tried with the administrator account directly,
both resulted the saem
it takes around 1 minute on the "0 remaining time"
then it just hide without saying its finished or completed,
the result is an icon in the start menu,
and in the windowsmobile directory in windows folder, it shows some files, like setup, and drivers
then if i check properties of the icon in the start menu, it shows that its for first time installation,
i click on it, it install again
then the changes are on the windowsmobile folder in windows folder more EXE files are there like WMDC.exe (but if run it, nothing comes out)
if i recheck the properties of the icon on the start menu, there is no more target application, (you could call it broken link)
whats happenning
i went through the installation part of it,
http://www.pocketpcfaq.com/faqs/wmdc/install.htm
its exactly what happen with me,
but my side i reach the screen which shows "Installing device driver software"
then it failes after,
if i check the devices i find that it find a bluetooth device, but cannot install it correctly
I have been using windows mobile centre in windows 7 64 bit for a long time successfully. 2 days back I was astonished to see that WMDC stopped working when I connected my Opal to laptop. I have searched a lot but of no use. I reinstalled WMDC several times but in vain. Further to say that my Opal can connect to my desktop having XP.
Help please to resolve this issue.
mirchichamu said:
I have been using windows mobile centre in windows 7 64 bit for a long time successfully. 2 days back I was astonished to see that WMDC stopped working when I connected my Opal to laptop. I have searched a lot but of no use. I reinstalled WMDC several times but in vain. Further to say that my Opal can connect to my desktop having XP.
Help please to resolve this issue.
Click to expand...
Click to collapse
Just went throught this with someone else and on your windows 7 computer have you ran any registry cleaners/defrag programs?
The other individual updated his bios and all was well with him.
It's a slow process but we can work on it together and figure it out.
Just about right said:
Just went throught this with someone else and on your windows 7 computer have you ran any registry cleaners/defrag programs?
The other individual updated his bios and all was well with him.
It's a slow process but we can work on it together and figure it out.
Click to expand...
Click to collapse
Thanks Just about right.
Yes! I have been using windows vista manager and I think that may be the reason. Actually this was not the only problem I faced. My copy/paste was also not working but that I corrected by registry back up. All my system restore were deleted and I could not do system restore.
Now after several attempts of install and uninstall of WMDC, I see another driver in device manager called pc to mobile usb sync which quite new for me. I didn't see it before. When I connect my ppc, it is detected as usb device.
mirchichamu said:
Thanks Just about right.
Yes! I have been using windows vista manager and I think that may be the reason. Actually this was not the only problem I faced. My copy/paste was also not working but that I corrected by registry back up. All my system restore were deleted and I could not do system restore.
Now after several attempts of install and uninstall of WMDC, I see another driver in device manager called pc to mobile usb sync which quite new for me. I didn't see it before. When I connect my ppc, it is detected as usb device.
Click to expand...
Click to collapse
Vista Manager will do that everytime. It is in the WOW files that makes it lose the setup and connection. If I remember right it removes a .dll that is needed. If you made a backup of your registry then go ahead and reinstall the registry from the backup. I love Vista Manager, but that was truely the only problem with the program that I found. If you don't have a backup, if you remember when you installed vista manager it did a restore point. You could go ahead and do a restore, just make sure you have all your files you need off first, just in case.
Hi
I would like to ask You for real help, advise, suggestion what to do.
First of all I know I can make hard reset but it is not a solution for me - more important is data on this mobile than to use it.
Samsung I780, WM 6.5 with HTC TODAY (big clock, six tabs) with tasks, calendar and wireless plugin.
I wanted to add Resco today plugin. Installation without problem . Restart and my phone hangs - loading startup animation, bottom bar with soft keys and nothing else. It hangs in today screen loading moment and phone doesn't respond to anything. Tapping, keyboard, buttons - nothing.
When I'm pushing buttons for example left softkey with shortcut to contacts after restart - they will open, so means that system respond before loading today screen, but then it is loaded in background and system hangs
I tried to restart many times with power button, removing battery.Soft restart with hole on left side. I hoped that after keys combinations Fn + enter + power - to force upgrading state will help, green + red + power to prepare for hard restet will help. After restart it is the same. In all those situations windows 7 x64 mobile center or windows xp x64 active sync, windows xp active sync cannot connect with mobile. In case when I connect it by cabel and I turn phone on activesync is trying to make a connection but after one or two minutes the sync icon is grey and nothing happend. With SD or without - still the same.
I was trying to establish connection PC-mobile by Mirage soft.
Mobile doesn't respond (for sure because of today plugin)
The questions are:
1. is there a key combination to force startup to default theme without loosing data, clear startup without any theme, plugins?
2. is there a possibility to make an autorun file on SD card to overwrite today theme configuration file at startup?
3. is there a possibility to make any batch file which block theme loading or will change theme registry entries?
4. is there a possibility to force connection between mobile and PC to get data without from PC?
5. Do You, HACKING WINDOWS MOBILE GODS, have any idea how to recover data from this mobile ?
If You have any friend, who knows or who has I780, or who has huge knowledge about WM - please show him this post.
Admins - I know that this is inproper but if You could put this post to Windows Phone section - lots of users which have Windows Phone device had WM device. PLEASE
Thanks in advance.
Guinnesss
OK, I must ask...
When you connect your device to the computer, does the computer acknowledge it? (aka, does it beep, or does anything pop up?)
if so, if you dont already have it, download and install activesync. it will allow you to setup your windows mobile with the pc. now go to the activesync window, and click "Explore"
now you should be able to copy data off of your device, move data, and more.
hope i helped
Hi
As You can read in first post:
windows 7 x64 mobile center or windows xp x64 active sync, windows xp active sync cannot connect with mobile. In case when I connect it by cabel and I turn phone on activesync is trying to make a connection but after one or two minutes the sync icon is grey and nothing happend