i have been searching for an answer to this problem!!
i need to be completely hands free... i.e. cant press the button on my bluetooth headset to answer incoming calls because hands are occupied!!
reading ont he sony eric website... the se hbh60 can answer/reject calls by voice ....
has ANYONE TRIED THIS SUCCESSFULLY ON XDA2 ....
please help. currently have jabra bt200...
no way
Qtek have no voice possibilities in this matter. I have tried with microsoft voice and you can talk to the Pda and then transfer to headset
Best
Related
been busy with work so this is actually my first free time to personalize my xda2. i'm almost done but what's puzzling me is the bluetooth configuration.
i followed the instructions for both the xda2 and jabra headset for bonding. no problems so far but what's puzzling me is how to use the headset now that they're bonded. i tried testing it by pressing on the headset once...but no 2 blips sounded. or by activating the media player, but still no luck.
what am i doing wrong or am i not doing something which i'm supposed to?
thanks for any help you can give
robson
headset profile is only for phone usage. u can't use it for anything else. i have hbh-65 and as long as headset is on and call comes in it goes to bluetooth and rings
alex
hey thanks! and all the while i thought i was doing something wrong. do i leave the bluetooth setting mode to "on"? and when a call comes in, the phone rings and i can hear it immediately through the bt headset? do i need to press any buttons on the headset to activate it or is it automatic (i can answer right away)?
i guess i got used to having the bluetooth adaptor plugged to my old xda that i'm still looking for those 2 blips whenever i depress the bt headset button.
cheers
robson
answered my own question
hey kalex, please disregard my previous post; i guess i just answered my own inquiries about the blue tooth bonding thing by using my landline and calling my mobile. the bt works great between the phone and the headset; when the mobile rang it immediately sounded off in my headset; just needed to press the button once to activate it. thanks a bunch!
cheers mate
robson
hey kalex or whoever can help out; the bluetooth headset works well when the phone rings and i take the call. however; how do you use the bt headset when you want to make an outgoing call?
cheers
robson
man, you really need to read the manual.
As the manual states, the jabra headset supports voice dialing.... only by default the XDA-II does not. You'd need to look at the various voice dial packages and see about getting that to work with the headset.... I dont fancy your chances... on the other hand maybe someone has already done this?
sorry dude; like i said i was a little busy with work so you'll have to pardon my excitement of fooling around with the xda...not to mention skipping the part about the manual
cheers mate
robson
I recently got an xda 2 and am buying a jabra 250. i presume that i'll need some voice software to make this totally hands free. or is this not the case.
any comments welcome :?:
I think the voice dial and headset issue is down to the headset BT profile that the XDA-II has plus the voice dial software supporting it.....
its muddy as hell, maybe someone else has a better idea. If I were you I'd find the voice dial software (there is plenty about) and then ask the authors for their recommendations.
voice software
Hello,
I can only say "me to" - I have HDW-2 Nokia headset but still looking for the voice software. I have tryied MS voice and I can say - forget the Microsoft voice - it is only dialing 7 or 10 digits numbers and trying to recognize the names - as most of my entries have non english names it does not work at all. I would rather have simple dialing digit-by-digit or nokia style recognition of the voice marks.
luk
okay, we had both thursday and friday off as holidays here in thailand; which gave me enough time to finally read the manual cover to cover. and i still have a question; you guys will have to forgive me but i need to clarrify something.
when receiving a call the sound is automatically directed to the bt headset. i can either manually accept the call or use the "answer call after this number of rings" function. no problems there so far.
my question goes back to making a call using the bt headset without the aid of any voice dial apps. when you dial a number and send it; can the bt headset still be used? or is it purely for incoming calls? i read the manual (both for the xda2 and the bt headset) and it doesn't say anything about this.
you'll have to excuse my persistence as i really don't know the answer to this one. neither the manuals nor the devices show the answer. perhaps some friendly chaps from the site can help as well?
cheers
robson
Robson said:
okay, we had both thursday and friday off as holidays here in thailand; which gave me enough time to finally read the manual cover to cover. and i still have a question; you guys will have to forgive me but i need to clarrify something.
when receiving a call the sound is automatically directed to the bt headset. i can either manually accept the call or use the "answer call after this number of rings" function. no problems there so far.
my question goes back to making a call using the bt headset without the aid of any voice dial apps. when you dial a number and send it; can the bt headset still be used? or is it purely for incoming calls? i read the manual (both for the xda2 and the bt headset) and it doesn't say anything about this.
you'll have to excuse my persistence as i really don't know the answer to this one. neither the manuals nor the devices show the answer. perhaps some friendly chaps from the site can help as well?
cheers
robson
Click to expand...
Click to collapse
just try it! You have to use that little green button to make the call, but then the call is treansferred to the headset.
to: [email protected]
ah, after a little more research in the forum based from your response; i finally got the bonding issue nailed to the ground! what i did was delete the bond between the xda2 and the bt; i then rebonded them and now it's working properly. cheers!
robson
I bought the Jabra BT-800 headset for 119 EUR and was hoping to enjoy the headset w/o getting my PPC out of my pocketst.
Well that didnt work out. Pairing was easy, and after switching on the headset (in profile on today screen) I could call with it. The only thing is, I cannot get the call list on the headset to work. It doesnt show any numbers at all, and i wonder how its supposed to work anyway.
That being said, I also don't get to see who's calling me when using the headset.
1) Incoming call.... PPC rings..
2) After a few seconds the headset backlight switches on showing "Jabra BT-800" (standard text). I do not get to see who's calling me on my headset.
3) When listening to the ring tone on headset, after a second or two I get a really annoying sqreaking sound and that stays on till I accept the call or hang up.
So it is not working for me. Besides the headset does not stay on my ear correctly. I have small ears and it is really uncomfortable.
I have Qtek 2020 with Windows Mobile 2003 SE ROM (downloaded from this forum), ROM version 2.06.00WWE, Radio 1.18.00, Protocol 1337.38, ExtROM 2.06.100a
The Jabra BT-800 does not do what they say it's supposed to do.
Anyone else got these problems or solutions? Ciao
R.
me too
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Re: me too
dewild1 said:
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Click to expand...
Click to collapse
Lucky you to get that far :evil:
After the upgrade to the Diamond 1.2 I have tried to bond my Bluespoon Digital. That was very easy and everything works fine, exept a call not is trasferred to the headset. I have tried both stacks, and I have tried it with the Sony Ericsson HBH 65. It simply doesn't work at all.
Does anybody have suggestions to what to do??
bluetooth headset not bonding
:lol:
Hi , I had smae problem with new I.Tech clip headset.
It's ok now as I downloaded the POcket Bluetotth Tools from this link:
http://bluetooth.i-networx.de/index_e.html
Now it's ok for incoming and outgoing calls...
Cheers..
Fingers
Persnickety Bluetooth
Thanks for the link!
I had a problem with my Jabra BT250 after the WM upgrade. The mic and speaker remained active on the device, and the earpeice on my headset was active, but not the headset mic. The BT Tools did the trick.
Thanks
Jabra BT800 & XDA ii
Hi there,
The Jabra BT800 isnt compatable with the XDA ii (check www.jabra.com)
I owned this headset and had exactly the same problems, i now own the Jabra BT200 and it works perfectly
The BT800 needs a phone with bluetooth handsfree profile to be able to use the advanced features like caller id. Xda II as standard has only bluetooth headset profile.
I'm not sure about the 2003SE rom some of you guys are using, but I've tried it with the Buzz WM2K5 rom (thanks buzz et al) and this DOES give it the bluetooth handsfree profile it needs.
BUT...
It seems Jabra's idea of caller id is to only pass the number across, and not the name. So for those of us that don't have a photographic memory its pretty useless. This isn't restricted to Xda's either. I tried a couple of Nokia phones that are 'compatible' according to www.jabra.com and these do exactly the same. Number shows on the jabra screen but no name, even though the phone is showing both.
I emailed Jabra about it and they acknowledge it is an issue. They also tell me there is an issue with numbers in international format in that they fail to pass the + sign across, so you can't ring out from the call list.
JD
Ya need 2.20 translated to have a working Hands Free profile.. BT800 needs hands free profile.
Caller ID still only displays if the number is a virgin to your system.. I think HBH662 will work with 2.20.
2005 may work with no problems too.
Hi folks,
is there any way to use a WM(6) device as bluetooth headset/speaker?
I want use Skype (or similar) on my PC with my Wizard and the Wizard's cable-headset as bluetooth headset / speaker.
I think I searched the whole net twice, but found nothing.
Any ideas?
Thanks,
TheDuke87
I'm not familiar with such an application but you can certainly use Skype Mobile 2.5 on your phone to talk while you're at home.
Hi,
thanks for your answer.
Skype was just an example, so that everybody knows what I'm up to.
Am I really the only one wishing to use the MDA as bluetooth headset?
Duke
I had a problem with the handsfree headset delivered with the S200.
2 seems to be available in ebay, but with very long delivery time.
I also tried my son's HTC HD headset, but it doe not seem to work
Has anyone identified a suitable replacement that would support both the headset function and the push to talk handsfree functions ?
Thanks in advance
Hi,
I have a problem with my Acer S200 and my SonyEricsson HCB-300 bluetooth car kit. I want to start a call from the SE hcb-300 call button and use voice dial(Vito), but it doesnt work with the s200. What can i do? Help me, please.
#1 i know that this is a dead thread but just for the heck of it+
headsets are universally compatible. u can use iphones,bbs,nokia. tested and all is fine.
crosstest said:
I had a problem with the handsfree headset delivered with the S200.
2 seems to be available in ebay, but with very long delivery time.
I also tried my son's HTC HD headset, but it doe not seem to work
Has anyone identified a suitable replacement that would support both the headset function and the push to talk handsfree functions ?
Thanks in advance
Click to expand...
Click to collapse
If you have phonex as replacement dailer then you have to disable "lock hardware buttons". Otherwise you can't accept a call when pressing on the headphone button.
I tried the following BT headsets SE HBH-PV715 and Nokia BH-105. And they both have the same sympton when lock hardware buttons is enabled in Phonex.
Hello!
I have my phone (Sony Ericsson Xperia X1) connected with my OEM Audi bluetooth system, which works fine so far. I can answer calls directly from Audi MMI interface, so no need to pull the phone out of my pocket.
But sometimes I'd like to answer calls directly into my phone, so they don't get redirected to the handsfree.
The best solution would be to assign a hardware key to answer directly into the phone.
Tell me the possibilities please
Thank you!