Related
I wrote a small app (based on other people's hard work) that will flash the LED when a new notification is active.
I did this because all my previous WM5 PDA's had a visible "new message" notification and I found it useful !
1. Copy the SDKCerts.cab from the Visual Studio SDK onto your device
2. Run the .cab on the device to install the SDK root certs
3. Extract the msgled.zip and copy msgled.exe to the startup folder of your Treo
Done
It *should* check every 10 seconds for new messages and flash the LED if there are any.
Enjoy.
Thanks. . coming from a Treo 650, ive missed this very useful feature via an app called Butler, i do hope that it can also be set to 'steady green or red'
Battery Drain?
Does this affect the battery?
mitch1 said:
Does this affect the battery?
Click to expand...
Click to collapse
It doesn't seem to have much affect at all
Thanks
Great app, works like a charm. Thanks!
Works like a charm indeed, but I am running into a small bug! I have my Treo set for powering off the screen after 1 minute, but if I have your tool active it won't. It will disable the display lights, but not actually turn the Treo off...
Thanks it works great.
Good Job !!!
ehh
works great..
only one thing.. i got a voicemail message so it left a notification and i got the blinking led (great).
But there seems no way to get rid of the voicemail notification now
So i tried to remove the msgled file form the startup folder.. doesnt let me.. hmmmm
Anyway to remove the msgled file? or stop it?
Greetzzz
DvL
service lights not blinking..
acowx said:
I wrote a small app (based on other people's hard work) that will flash the LED when a new notification is active.
I did this because all my previous WM5 PDA's had a visible "new message" notification and I found it useful !
1. Copy the SDKCerts.cab from the Visual Studio SDK onto your device
2. Run the .cab on the device to install the SDK root certs
3. Extract the msgled.zip and copy msgled.exe to the startup folder of your Treo
Done
It *should* check every 10 seconds for new messages and flash the LED if there are any.
Enjoy.
Click to expand...
Click to collapse
Hi,
I guess you can help me in my Problem.
I had flashed my ROM for softbank x01ht witha widows6 rom(dont remember which version).
Since then the Device lights i.e. the bluetooth light and the service ligts are not working meaning they do not blink at all.
When I connect the Charger, a RED LED flash for a fraction of second and then goes off, though the charging is done with no problem.
Can you pls tell me how can I solve this problem, I have tried to search a solutuon with all the possible combination of key words.
Pls. help me if you know any possible solution.
THANKING YOU IN ADVANCE,
Mandrix
This is great, thanks!
is there any way to turn the led orange instead of green when receiving new messages?
great app though. thx.
Treo 750 - Missed call / message notification orange LED
Zwuncki
I too am looking for an option to do this but it seems that the only option so far has been to turn the LED green for notifications (I am using Mortscript and nled). An improvement over the existing but orange would be nice.
For the Treo 650, this was nicely done by an application called "MissedCall" but from reading posts in other forums it seems that no one has figured out a way to turn on the orange LED in Treo 750 (it does this when out of range of signal in its built in default state).
Works great!!!!
cdelauz02 - what works great? I assume you are talking about Mortscript/Nled? or have you gotten the notification to turn the orange LED on somehow?
acowx said:
...It *should* check every 10 seconds for new messages and flash the LED if there are any...
Enjoy.
Click to expand...
Click to collapse
Do you think this will drain the battery? Since it checks every 10 seconds for new messages.
Great feature though! Very nicely done!
I've had this script installed for a couple of months now and can't say that I've noticed any impact on my battery life. I still get 2-3 days between charges.
marsonist said:
I've had this script installed for a couple of months now and can't say that I've noticed any impact on my battery life. I still get 2-3 days between charges.
Click to expand...
Click to collapse
Thanks for your answer. Nice to see some activity on the 750 forum.
At the moment I'm trying SPB Phone Suite. It looks like it also notifies the user by flashing the LED when you've missed a call. One "bug" is when you dismiss a missed call the indicator still shows the number of missed calls.
I might be mistaken, but if I understand what I've read over at the Phonealarm forums the 750 handels notifiers different than other pocket pc's and what you've noticed is one of the results. I believe that the counts should reset if you actually view the missed call log.
Otherwise, how do you like the SPB phone suite? I've been eyeing it, but being a regular reader of the phonealarm forums I know the amount of work that goes into such a program and am a bit weary of a first release. What's your impression?
I must say that I like the idea. It sure is a very good first release! Skinning is not my main target. Stability is
Just installed a Beta of PhoneAlarm. It worked for a few hours, now the screen looks messed up (stripes). Like the images aren't rendered correctly.
Read that the memory footprint of PhoneAlarm is smaller than SPB Phone Suite.
But we're a little of topic now Will post more info when I have it!
faisal said:
cdelauz02 - what works great? I assume you are talking about Mortscript/Nled? or have you gotten the notification to turn the orange LED on somehow?
Click to expand...
Click to collapse
I was referring to the led notifications, I dont mind having the led green, but if orange was available it will be nice as well.
Is there a way to keep the notification light on the dpad (where the light goes around counterclockwise) on permanently without it only activating on things such as missed calls, new emails, etc.?
emks342 said:
Is there a way to keep the notification light on the dpad (where the light goes around counterclockwise) on permanently without it only activating on things such as missed calls, new emails, etc.?
Click to expand...
Click to collapse
jw why would you want some thing like that? it will waste battery on a device that already has battery issues.
just trying to mess around with the settings and such. I don't really have many issues with the battery since I don't use it heavily. anyone know how?
The notification light has one purpose - to notify you that something happened ;-) Therefore I can't think of a reason why would one want it on permanently.
Anyway, I think this could be easily done by an experienced programmer (which unfortunately I am not). The question is if anyone would want to do it.
EDIT: My opinion is - don't touch anything that works well ;-) If you don't have battery issues you should be grateful. Let sleeping dogs lie ;-)
ahah yes i know. I'm just trying to see if theres like a setting in the reg or something where I can maybe change the way it blinks, when it blinks, duration (aside from the sounds/notifications tab), etc. Could also help if phone was in the dark, the LED lights would be useful..
anyone got some ideas?
any theories out theree? x_x
I'm interested to, because if we want to have a notification of operator signal, its a good idea.
hey all, two questions. first, I was wondering if anyone has figured out (or bothered to look into lol) changing the behavior of the back button in messaging. it seems like it goes back to the last message you were on, even if it's the same one you're still on. it'd be nice to have it just go back to the message list every time. i get this may be a bug that's being worked out, but hey, there's no harm in asking
second, would it be possible to make the keyboard enter key not send messages? i don't care if it does nothing, i just don't want it to send the damn message... i think like 1/3 of the messages i type wound up getting sent prematurely. it would be nice to just have the one on-sceen send button.
thanks so much
Well, if you use ChompSMS, you can set it so the enter key will just put a return line in, instead of sending the message. It's a setting that you can toggle on/off. Thats about the best I can give you right now.
cool... this little iphone knockoff looks pretty sweet. now i just have to figure out how to change the icon to match my theme
thanks a lot
Guys,
I installed the Nueled LED driver (which used to work quite well with mogul) and looks like it has screwed up my LED notification. I even uninstalled it, did a hard reset and sprite restore but my feeling is that the LED is not behaving like it used to. I think there was a constant signal LED but I dont see it any more. The only LED notification which is working is the email one.
Even the WIFi and bluetooth are not giving any notification. any suggestion?
Also:
Can someone please tell me the default LED behaviour (with color) for Sprint 6.5 ROM for the following:
1. Signal available
2. Wifi
3. Bluetooth
4. Messages (Email/SMS/MMS)
5. Reminders
6. Battery Low
7. Charging
8. Battery full charged
Thanks!
if you hard reset there is no way the led is still messed up.
Actually you are right. Some ppc geeks guys confirmed thats how the LEDs have been configured in TP2 Sprint.
bones20 said:
Actually you are right. Some ppc geeks guys confirmed thats how the LEDs have been configured in TP2 Sprint.
Click to expand...
Click to collapse
My LED only flashes on next text, email, i think missed calls. Other than that, and charging/charged, nother color or light comes up. Only orange and green. Thats how I got it so I guess thats how it supposed to be? LIke when I hook up to bluetooth, it doesnt turn blue or anything. I didnt think it was supposed to?
denraweb said:
My LED only flashes on next text, email, i think missed calls. Other than that, and charging/charged, nother color or light comes up. Only orange and green. Thats how I got it so I guess thats how it supposed to be? LIke when I hook up to bluetooth, it doesnt turn blue or anything. I didnt think it was supposed to?
Click to expand...
Click to collapse
Yaa, after looking around here and there, I found out thats the case.
im late returnig text sometimes because it only blinks three times per min. Anyway to make it blink longer?
Only way I know to do it is to use Handcent SMS. They're the only ones who seem to have figured out the Sidekick's LEDs.
I'm in the same boat. I know that Handcent can manipulate the LEDs, but damn, for some reason I love the look of the stock messaging app.
it would be nice to be able to chance the led colors and req of its blink. i miss it from the old ones, and cant stand the new ones led blink feq. argg. handcent though like he said.
Man, I use gosms pro. I hope they can maipulate leds also. I don't like using handcent.
Yea huh
Sent from my SGH-T839 using XDA Premium App
I would like to have more specific control of the LEDs also. I use Gmail's app for all my email functions and ignore the built-in app. However it will not control the LED lights for incoming messages at all! Also I would love to see more frequent messages (or make it selectable).
So many things on the phone, including LEDs, are forced settings without much user control at all (unlike the Danger OS Sidekicks). I hope Rooting (which I hope to do in the next few weeks) will take care of some of these issues.
Things are being worked on, but the developer base is unfortunately small. We started out with the big issues, like the power menu and lockscreens, and are currently working on people's requests, an OC kernel and vibrate &silent in vol rocker. It's on the list of things to do, as it bothers most everyone, just isn't as big an issue, so it's slightly lower on the list.
sduvick said:
Things are being worked on, but the developer base is unfortunately small. We started out with the big issues, like the power menu and lockscreens, and are currently working on people's requests, an OC kernel and vibrate &silent in vol rocker. It's on the list of things to do, as it bothers most everyone, just isn't as big an issue, so it's slightly lower on the list.
Click to expand...
Click to collapse
Ah, so its being paid attention too. i've really got to learn to dev so i can start tackling these things myself.
If nothing else, it's on my list.
im working on this now im doing my best im new at this but ill try to get a fix!
tylermaciaszek said:
im working on this now im doing my best im new at this but ill try to get a fix!
Click to expand...
Click to collapse
i have time tonight, so im going to try to see what i can do about it as well, we're both new to it but if i find anything i think is important ill pm you so we can do this quickly.
Good to see more people trying to jump in! That's the best way to do it, that's how I did it, just poke around at things, you can always just odin back to stock.
If you have any questions, I'll do my best to help, I should be around, PM me if you need anything.
sduvick said:
Good to see more people trying to jump in! That's the best way to do it, that's how I did it, just poke around at things, you can always just odin back to stock.
If you have any questions, I'll do my best to help, I should be around, PM me if you need anything.
Click to expand...
Click to collapse
do you know what permissions or something that controls the LED'S becaude obviously they have the power to flash more than 3 times! samsung has just decided to screw with us. in other words what does cyangoen mod and handcent change that allows the LED to blink more
basically what you need to do is edit the settings to have a menu that allows for different timing for the LED's, and then point the LEDs to that menu when they want to flash.
sduvick said:
basically what you need to do is edit the settings to have a menu that allows for different timing for the LED's, and then point the LEDs to that menu when they want to flash.
Click to expand...
Click to collapse
alright thanks ill try a few more things!
I hear handcent got the leds working for our sidekicks. Maybe there's a way to look into that for some code or something.
The problem isn't getting it working, it's getting the notification to send the correct setting. the LEDs already work just fine.
I suppose that you could edit mms.apk instead of settings, and you could add the setting in there.
thanks for the lead ill check that out now and i already looked in handcent im still looking!
I'll try decompiling the mms.apk and see if maybe I can find it easily.