Related
Doing a Quick Poll to see if anyone on Straight Talk Wireless has Pandora working over LTE/3G. About a month or so ago I noticed that Pandora has become basically useless on my phone over LTE/3G. It will not load and play any songs unless I put the phone in airplane mode then take it off airplane mode for every song. I have had this problem on both of my N5's that are completely stock running Android 5.0.1.
nexus 5 on 5.0.1 + Pandora + straight talk = headache
Having same problem with the same setup. I did not notice the problem until the factory update. Not sure if it is a Straight Talk issue or an issue with the way the new os handles pandora's requests for data via cellular. I've thought about downgrading the is to see if that helps. Seemed to work fine on 5.0 before the ota update
rturkin1 said:
Having same problem with the same setup. I did not notice the problem until the factory update. Not sure if it is a Straight Talk issue or an issue with the way the new os handles pandora's requests for data via cellular. I've thought about downgrading the is to see if that helps. Seemed to work fine on 5.0 before the ota update
Click to expand...
Click to collapse
If you downgrade please let me know if it works.
Pandora updated their app today and it is now working just fine
Anyone have a link for the "modified" Pandora 5.7 thanks
Hi guys,
my android auto (in a certified compatible car AA) it's fully broken from Oneplus Android 10 versions.
Tried the beta3, beta4, and "official" android 10, always same problems.
Connections in not stable, sometimes audio glitch and interface (of my car) forced to reboot.
Almost always, the buttons from above interface disappear (in every app, like spotify, maps, waze, etc...) becoming fully unusable.
The vocal commands works only with navigator and music, no more google assistance questions (like what's the weather tomorrow) --> This seems confirmed that is broken in google side.
Now, I'm trying to understand if it's fully broken android 10 + android auto (the system AA level, not anymore an app to be lauched) OR it's only with these oxygen's roms, still broken in some way.
Please, someone have real feedbacks to give me ? I'm very disappointed, thinking to go back to Android 9 just for this, but i will loose every update (included the security monthly fix) because OPO is supporting already just Android 10.
What can I do ?
Tried all the throubleshoot I've found around of course, like wipe cache, delete app, use "new" AA interface, cables, etc...
Car: Mazda CX3 (it seems that Mazda + OPO7Pro is the devil match)
avid_droid said:
What I've learned from this phone and Android auto is that if you have USB debugging enabled, Android Auto will give you the worst experience.... EVER!
If you have it off, o don't know what to tell you honestly. If its on, TURN IT OFF! I have a 2017 Chevy RS Cruze and have no issues except when I have debugging enabled
Click to expand...
Click to collapse
Thanks for the tip, but unfortunately it was one of the things I've tried... Disabled the usb debug and also fully disable the dev. Mode...
BUT, are you on android 10 ? Really it's stable to you ?
Guys, some more feedbacks ?
My opo7pro with latest stable 10.0.2 it's still unstable with android auto (mazda).
Main selector icon disappear (becoming unusable), random crash/reboot, audio glitch...
Ufff
I've had my op7p for about a week. I have a Kenwood dmx 905 with wireless Android auto. Phone came with Android 9. Had no problems connecting without using the USB cord. Did the local update to Android 10. Now it won't connect unless I use the USB cord. Then I can disconnect the cord and go wireless. I have to do this every time now. Want to know to go back to Android 9.
m4ssnet said:
Guys, some more feedbacks ?
My opo7pro with latest stable 10.0.2 it's still unstable with android auto (mazda).
Main selector icon disappear (becoming unusable), random crash/reboot, audio glitch...
Ufff
Click to expand...
Click to collapse
Got the same with OOS in my Mazda. Switched to custom ROM, no more issues.
I can confirm the debugging issue making AA go weird. If I have it enabled it has a spastic, if I disable it, AA works flawlessly.
aoaleman said:
Got the same with OOS in my Mazda. Switched to custom ROM, no more issues.
Click to expand...
Click to collapse
man... I'm without hope
Really with custom's no problem at all ? I investigated more... I really think it's a problem also in Mazda side + OPO7Pro Android 10.
I didn't want this time go custom, I'm fully stock without root (for security reason etc...)
Ufff... very disappointed, 10.0.3 still has the same problem :crying:
Having huge problems with my 2016 Skoda Octavia Amundsen. I will try debugging mode off and report. Thx everybody.
-tapola
PS. As AA is not supported in Finland yet, how can I edit the power saving option of this App?
Hey all, I have a OP 7 pro and ever since receiving the OTA update to 10.0.3 everything seems to be buggy. Soon after, 10.3.0 came along and is no better.
Some of my issues include:
- battery drain
- GPS not accurate
- Many apps showing no network connection even though I have internet
- apps crashing on their own
- play store and games won't stay logged in
There are other issues but I can't remember at there moment.
Is there a resolution for these? Can I download back to 9?
Thanks for any advice.
You are no lucky or you are a noob
Not sure how to analyze that answer.
I'm not lucky - sems to be quite a few out there who aren't lucky then... They are posts on many sites with users complaining about issues after this upgrade.
I'm a noob - relevant? Maybe I am, I used to have another XDA account which I don't use any more... Been a member since 2008 - installed my first rooted Rom - Valhalla for the Samsung Galaxy s 4g ( not the s4, the s 4g. - that was before the s2 came out).
Again, not sure what the relevance is, just trying to understand what went wrong with the OTA.
UnheardHawk said:
Hey all, I have a OP 7 pro and ever since receiving the OTA update to 10.0.3 everything seems to be buggy. Soon after, 10.3.0 came along and is no better.
Some of my issues include:
- battery drain
- GPS not accurate
- Many apps showing no network connection even though I have internet
- apps crashing on their own
- play store and games won't stay logged in
There are other issues but I can't remember at there moment.
Is there a resolution for these? Can I download back to 9?
Thanks for any advice.
Click to expand...
Click to collapse
Clear Cache in recovery, if that does not fix the issues, do a factory reset. Recommended to factory reset for maximum experience after big update., like from 9 to 10.
Did the clear cache... Still no joy
I was trying to avoid factory resetting. The upgrade on my OnePlus 5T went seamless. Oh well factory reset it is...
Just funny how Google apps seen to have the biggest issues... Lens always shows no network connection, and Google maps just plain won't pick up my location... Waze works fine which is the silly thing.
Have to wait till I get back home to do FR, thanks.
To be fair, there's not a whole lot one could say with the information given. Like are you completely stock? Rooted? What kinds of magisk modules if any? Etc...
All i can tell you is that i don't have any issues with the 10.0.3 update specifically or 10 in general.
But it does seem like your issues are related to gapps and services so I'd start there
Completely stock, I was thinking gapps... Will experiment and update
Get familiar with A/B slot partitions. It's a lot different from single slot systems.
Try a clean install through TWRP.
UnheardHawk said:
Hey all, I have a OP 7 pro and ever since receiving the OTA update to 10.0.3 everything seems to be buggy. Soon after, 10.3.0 came along and is no better.
Some of my issues include:
- battery drain
- GPS not accurate
- Many apps showing no network connection even though I have internet
- apps crashing on their own
- play store and games won't stay logged in
There are other issues but I can't remember at there moment.
Is there a resolution for these? Can I download back to 9?
Thanks for any advice.
Click to expand...
Click to collapse
Not entirely sure if this matters but are you using a carrier variant or unlocked straight from OnePlus? Also, I'm not one for factory reset, but if you were experiencing problems on 10.0.3 and now 10.3, I can only surmise that some bits were probably corrupt and a factory reset would do you some good. That or flash back to 9.5 and completely update back up. Someone mentioned in another thread, that you should install the full it's 2.1gb if you are running a custom kernel.
Sent from my OnePlus7Pro using XDA Labs
Straight from OnePlus.com on May 14...
I am on T-Mobile but didn't get it from them.
Hi,
Those who installed LineageOS on T5, could you please share your experience ?
I noted from few comments on this forum:
5GHz Wifi is not working but 2.4 GHz is working fine
disable HW overlays in the dev options to remove blur
disable AudioFX to correct sound
Is there any other prooblem ? What about bluetooth, camera, GPS, gapps ?
Any feedback will be appreciated
I'm the one who said it didn't work on 5GHz wifi, it is working.
I had to wait several minutes until my AP appeared, once I connected for the first time it did not give me any problem.
Also something like this happened when starting LineageOS for the first time, it did not connect neither in 2.4 nor in 5 but waiting it worked.
After disabling AudioFX I installed Eqfy Equalizer which works fine.
The camera app is not working, a white line appears in the middle of the screen and there are no photo options or anything.
Since I don't use it to take photos, I have not tried more but I suppose that with some other camera app it should work.
Not tested bluetooth or GPS for now.
On the other hand, the tablet works more fluidly and you have more free space.
In the absence of trying more things, for now I'm sticking with LineageOS.
Thanks for your feedback.
I have flashed LienageOS 16, and have patched RAMDISK.IMG to install Magisk.
It looks OK, I like it so far. There are only two issues:
* Camera is not working
* I have only 2,4Ghz WiFi (which btw is working fine), but I do not see 5,0 GHz network in my list
GPS, bluetooth, sound, image,...everything seems working OK, but I didn't check in details.
Despite those two issues I will stay with LineageOS. I prefer it one hundred times over EMUI. And for camera, which btw is not very important to me neither, I will probably find a fix one day.
From time to time your 5GHz AP may appear, you can connect but then it disappears again.
Yesterday I checked, I thought it was connected in 5GHz but no, the connection was in 2.4
I confirm that the Wifi in 5GHz does not work.
borja113 said:
Thanks for your feedback.
I have flashed LienageOS 16, and have patched RAMDISK.IMG to install Magisk.
It looks OK, I like it so far. There are only two issues:
* Camera is not working
* I have only 2,4Ghz WiFi (which btw is working fine), but I do not see 5,0 GHz network in my list
GPS, bluetooth, sound, image,...everything seems working OK, but I didn't check in details.
Despite those two issues I will stay with LineageOS. I prefer it one hundred times over EMUI. And for camera, which btw is not very important to me neither, I will probably find a fix one day.
Click to expand...
Click to collapse
I have sorted it out.
For WiFi, I changed the channel on my router, put it at 44, and now the 5,0 Ghz Wifi is visible and I can connect.
For camera, I have found a Gcam which works OK, it is "GC_4.1.006.126161292-41003513.apk", easy to find on XDA.
So now I have LineageOS fully working. For the time being everything is fast and stable.
Kgonla said:
From time to time your 5GHz AP may appear, you can connect but then it disappears again.
Yesterday I checked, I thought it was connected in 5GHz but no, the connection was in 2.4
I confirm that the Wifi in 5GHz does not work.
Click to expand...
Click to collapse
I thik it is related to router. On my router, in settings, the choice of channel was set to automatic, I put it to 44 and it is visible, and the connection is fast and stable. For some reason the tablet doesn't see higher frequencies.
borja113 said:
I thik it is related to router. On my router, in settings, the choice of channel was set to automatic, I put it to 44 and it is visible, and the connection is fast and stable. For some reason the tablet doesn't see higher frequencies.
Click to expand...
Click to collapse
I'm going to take a look to Gcam, I've tested a couple of cam apps but not working.
Now I'm using channel 56 but previously I tested other channels, maybe the day it worked I was using a lower one, will test too.
Thanks a lot.
borja113 said:
I have sorted it out.
For WiFi, I changed the channel on my router, put it at 44, and now the 5,0 Ghz Wifi is visible and I can connect.
For camera, I have found a Gcam which works OK, it is "GC_4.1.006.126161292-41003513.apk", easy to find on XDA.
So now I have LineageOS fully working. For the time being everything is fast and stable.
Click to expand...
Click to collapse
Hello again, I have changed the channel to 44 and for now it works fine.
The Gcam is not working for me, It tells me that it cannot find the camera and closes.
Kgonla said:
Hello again, I have changed the channel to 44 and for now it works fine.
The Gcam is not working for me, It tells me that it cannot find the camera and closes.
Click to expand...
Click to collapse
Hello. If this can be of any help: the Gcam which I installed, I found it on this thread:
https://forum.xda-developers.com/huawei-p20/themes/google-camera-huawei-p20-kirin-devices-t3882198
It is : Google Camera v4.1.006.126161292, in the first post, section OTHER AVAILABLE APKs.
Maybe we’re not using the same version.
After flashing LineageOS, I found that I had two cameras : HwCamera2.apk 8.0.0.200 which I think is Huawei camera, and Camera2.apk 2.0.002. First one was crashing immediately, the second one didn’t work with a white line in the middle. Now I have first one disabled, second one is still there but useless. And third one is the one above which is OK.
Has anyone had any luck with Netflix?
I tried LineageOS yesterday and was unable to install Netflix from the play store, likely because it said I was uncertified. I was however able to download and side load Netflix, which initially appeared to resolve the issue, however any attempt to play content resulted in a 5.10 error. From what I can tell, this appears to be something to do with DRM, however the few potential solutions I've found using Magisk didn't help resolve the situation, and I've ended up reverting to Emui
Aside from Netflix, I didn't come across any other issues while testing. Unfortunately for me, Netflix was the main reason for getting this tablet in the first place, my old 3rd Gen iPad would have been more than adequate for my needs other wise
In order to get Netflix work, I installed one older versions found on apkmirror. I picked up randomly 6.21.0. I installed also liboemcrypto_disabler (even though I do not know if it was necessary), and in addition of that it is hidden in Magisk. It is working, I do not know how to check the quality, but I guess it is 720p.
Why TWRP needed why not to flash directly from stock recovery...
If you want to install LineageOS, the TWRP is not needed. You flash LineageOS via fastbot. In fact, it is better not to mess with TWRP, officially it is not supported by OpenKirin ROM's.
I also thought so but it's ok I have LineageOS installed with OpenCamera everythink seems to be working fine even LTE is there 16.1 version available ?
and also where can I get stock recovery if I need it, is it available for download anywhere ? or after LineageOS instalation it also installs stock recovery ?
If you want go to stock recovery again, On OpenKirin site there are comprehensive guides, under section Support, about where to find stock EMUI firmware, and how to extract and flash stock recovery image.
I do not think that LineageOS will install stock recovery, if you had TWRP before LineageOS installation, most likely it is still there. You may check it yourself : Vol Down + Power on boot.
I've just tried LineageOS build 6 on my AGS2-W09 and the camera seems to work ok now.
Had to install OpenCamera and set the all permissions, clear storage for this app and on the next run it can finally save the aquired photo.
The 5Ghz WiFi works with no problems (my router selected channel n.60)
As for audio: there is a glitch when device is booting, might want to not wear headphones during a reboot ☺
Haven't tried disabling AudioFX or installing Viper4Android as I am rolling back to stock firmware.
Netflix:
I think I konw why Netflix is not working: I have no IMEI with this OS.
UPDATE: IMEI should not matter on this device as it has no network.
I had tried the Netflix 6.21.0 version mentioned here and it gives me the same "Device failure occurred 501.-1006" error.
Then I've installed Kodi with a Netflix addon and it gives me: "It was not possible to get data from Widevine CryptoSession. Your system is not Widevine certified".
It is pretty clear that the LineageOS 16 build 6 (lineage-16.0-20201019-emui8-gapps.img) has no Widewine libraries installed.
Other than this the OS is very responsive, unfortunately I have to rollback because of this.
I am using this tablet for Netflix and prime on stock emui.
I really want to upgrade to custom ROM but no polished ROM anywhere!
guys how you have managed to pull boot.img from the device?
can anyone guide me through?
I have successfully managed to flash LineageOS latest build on MediaPad T5
kamilmirza said:
guys how you have managed to pull boot.img from the device?
can anyone guide me through?
I have successfully managed to flash LineageOS latest build on MediaPad T5
Click to expand...
Click to collapse
Can you share the entire installation process.
Thanks
bluestar778 said:
Can you share the entire installation process.
Thanks
Click to expand...
Click to collapse
For LineageOS 16 --> https://forum.xda-developers.com/t/twrp-lineageos-16-installed-in-t5.4161857/
For Latest build (LOS18.1) --> https://forum.xda-developers.com/t/...ation-guide-for-mediapad-t5-ags2-xxx.4291431/
Phone Motorola One Vision (unlocked but NOT rooted)
Recently got updated (in UK) to Android 11 ~ 24th August 2021
Received a Security Update (dated 1 August) on 1st September 2021
Problem: Bluetooth will not stay connected - phone 'sees' whatever I try to connect to, it might 'connect' but then disconnects - depending on device it may take a few attempts before giving up
Firstly before anyone says 'search for it' - I have.
I've seen many posts about Android 11 & it's 'broken' bluetooth & the many so-called temporary fixes - but nothing works for me
(Clear Cache/Data, Reset Networks, Delete/Upair & reconnect etc) - Only thing I've not done is a full Phone factory reset
When the phone got updated to Android 11 everything went smoothly, except I had to go through all my Apps & (re)give the necessary permission to SD card etc. This also meant my Car Infosystem (SYNC 3 on a 2018 Ford C-max) didn't recognise my phone - so I deleted it & reconnected it & afaik for the week I was on Android 11 the phone stayed connected without any problems.
My Bluetooth Earbuds (cheap pair off of Amazon) still worked without any sound drop-off & My Amazefit Bip watch also stayed connected (apart from the occasional 'hiccup' when the App I use gets an update)
I then received a 'Security Update' a week later & now I've noticed Bluetooth is NFG (No F-ing Good).
When I try to pair up, the device(s) are seen (whether the car, earbuds or another phone) - I get the usual 'Check Pin matches the same as...' messages & I confirm.... then the phone disconnects/reconnects/disconnects until it finally gives up
In the case of the Car connection I get additional messages such as 'Allow Access to messages - An Untrusted Bluetooth device Ford C-Max, wants to access your messages' & I also get 'Bluetooth has stopped' pop-ups
In the case of Pairing up Phones - it just connects & disconnects, sometime when trying to reconnect - it doesn't even try to connect
The ONLY things that seems to stay connected is my Amazefit Bip watch - & ironically this is the only thing that DOESN'T show up as a 'Previously connected device' under Bluetooth
To try & figure this out I've tried all the usual tricks mentioned on Google Searches (as mentioned above), as well as trying different AVRCP & MAP options under the Phones 'Developer options' (even the 'Enable Gabeldorsche' option that apprently is suppose to stabilise connections)
- Nothing I've tried lets me stay connected more than a few seconds.
As I mentioned earlier I googled a lot & I see that Android 11 has had Bluetooth connection problems for a long time (posts I've seen go back to Feb 2012) & it's not just on one particular phone manufacturer - all the solutions given are basically all the same thing repeated, which I've tried (apart from the full manufacturer reset)
But as mentioned - these are 'old posts' (a few months old) & my questions are.....
Is there a permanent 'fix' for Android 11 Bluetooth connection problem ?
Do I/Will I have to wait until a proper fix is sent ? (afaik all this has happened due to the last 'Security Update' I received)
Is there a way to 'roll-back' to the previous Security Update (remember my Phone isn't rooted) - just to prove it's the update that caused the problem ?
or am I totally 'up-the-creek-without-a-paddle' do to a muck up by Google/Android developers ?
Cannon_Foddr said:
Phone Motorola One Vision (unlocked but NOT rooted)
Recently got updated (in UK) to Android 11 ~ 24th August 2021
Received a Security Update (dated 1 August) on 1st September 2021
Problem: Bluetooth will not stay connected - phone 'sees' whatever I try to connect to, it might 'connect' but then disconnects - depending on device it may take a few attempts before giving up
Firstly before anyone says 'search for it' - I have.
I've seen many posts about Android 11 & it's 'broken' bluetooth & the many so-called temporary fixes - but nothing works for me
(Clear Cache/Data, Reset Networks, Delete/Upair & reconnect etc) - Only thing I've not done is a full Phone factory reset
When the phone got updated to Android 11 everything went smoothly, except I had to go through all my Apps & (re)give the necessary permission to SD card etc. This also meant my Car Infosystem (SYNC 3 on a 2018 Ford C-max) didn't recognise my phone - so I deleted it & reconnected it & afaik for the week I was on Android 11 the phone stayed connected without any problems.
My Bluetooth Earbuds (cheap pair off of Amazon) still worked without any sound drop-off & My Amazefit Bip watch also stayed connected (apart from the occasional 'hiccup' when the App I use gets an update)
I then received a 'Security Update' a week later & now I've noticed Bluetooth is NFG (No F-ing Good).
When I try to pair up, the device(s) are seen (whether the car, earbuds or another phone) - I get the usual 'Check Pin matches the same as...' messages & I confirm.... then the phone disconnects/reconnects/disconnects until it finally gives up
In the case of the Car connection I get additional messages such as 'Allow Access to messages - An Untrusted Bluetooth device Ford C-Max, wants to access your messages' & I also get 'Bluetooth has stopped' pop-ups
In the case of Pairing up Phones - it just connects & disconnects, sometime when trying to reconnect - it doesn't even try to connect
The ONLY things that seems to stay connected is my Amazefit Bip watch - & ironically this is the only thing that DOESN'T show up as a 'Previously connected device' under Bluetooth
To try & figure this out I've tried all the usual tricks mentioned on Google Searches (as mentioned above), as well as trying different AVRCP & MAP options under the Phones 'Developer options' (even the 'Enable Gabeldorsche' option that apprently is suppose to stabilise connections)
- Nothing I've tried lets me stay connected more than a few seconds.
As I mentioned earlier I googled a lot & I see that Android 11 has had Bluetooth connection problems for a long time (posts I've seen go back to Feb 2012) & it's not just on one particular phone manufacturer - all the solutions given are basically all the same thing repeated, which I've tried (apart from the full manufacturer reset)
But as mentioned - these are 'old posts' (a few months old) & my questions are.....
Is there a permanent 'fix' for Android 11 Bluetooth connection problem ?
Do I/Will I have to wait until a proper fix is sent ? (afaik all this has happened due to the last 'Security Update' I received)
Is there a way to 'roll-back' to the previous Security Update (remember my Phone isn't rooted) - just to prove it's the update that caused the problem ?
or am I totally 'up-the-creek-without-a-paddle' do to a muck up by Google/Android developers ?
Click to expand...
Click to collapse
Im having exactly the same problem. Looks like it's the security update. May have to wait a month to get a fix I hope.
Sorry, I have the same problem with my One Vision XT1970-3 after upgrading on android 11
Did you give Magisk Bluetooth Library Patcher a try?
Same problem on UK Moto One Vision XT1970 following update to Android 11 and subsequent security update on same dates as above..
Ford Galaxy 2018 Sync 3 keeps disconnecting and reconnecting before giving up. Same Bluetooth "check pin..." message appears.
Everything worked flawlessly under Android 10. This is definitely an Android 11 issue.
It would be great to see some positive response from Google / Android / Motorola.
dc
dc305 said:
Same problem on UK Moto One Vision XT1970 following update to Android 11 and subsequent security update on same dates as above..
Ford Galaxy 2018 Sync 3 keeps disconnecting and reconnecting before giving up. Same Bluetooth "check pin..." message appears.
Everything worked flawlessly under Android 10. This is definitely an Android 11 issue.
It would be great to see some positive response from Google / Android / Motorola.
dc
Click to expand...
Click to collapse
Not a lot unfortunately.
I posted this problem on the Lenovo/Motorola Community Support forums (3rd October) & it seems not just you & I have had this problem (& not just on Ford Sync 3 either) - it does seem to point more towards the September Security Update though
Some posters have gone & brought new phones because of this problem, & (IMHO) a couple have even been a bit brash in their comments about how poor the support is. (What DID people do before phones could connect to cars by Bluetooth??? - I remember if someone called while I was driving, I just waited until I could pull over & phone back lol)
I admit I would've liked Motorola to release a sort of mid-month 'rollback' security update or something.. maybe even allowed people with problem to download & side install (somehow) the pre-1st August update just so that they could use their phones like they did before (I think you can with a rooted phone, but mine is unrooted).
let's hope they figure it out for the October Security Update
Cannon_Foddr said:
Not a lot unfortunately.
I posted this problem on the Lenovo/Motorola Community Support forums (3rd October) & it seems not just you & I have had this problem (& not just on Ford Sync 3 either) - it does seem to point more towards the September Security Update though
Some posters have gone & brought new phones because of this problem, & (IMHO) a couple have even been a bit brash in their comments about how poor the support is. (What DID people do before phones could connect to cars by Bluetooth??? - I remember if someone called while I was driving, I just waited until I could pull over & phone back lol)
I admit I would've liked Motorola to release a sort of mid-month 'rollback' security update or something.. maybe even allowed people with problem to download & side install (somehow) the pre-1st August update just so that they could use their phones like they did before (I think you can with a rooted phone, but mine is unrooted).
let's hope they figure it out for the October Security Update
Click to expand...
Click to collapse
PJ
Cannon_Foddr said:
Not a lot unfortunately.
I posted this problem on the Lenovo/Motorola Community Support forums (3rd October) & it seems not just you & I have had this problem (& not just on Ford Sync 3 either) - it does seem to point more towards the September Security Update though
Some posters have gone & brought new phones because of this problem, & (IMHO) a couple have even been a bit brash in their comments about how poor the support is. (What DID people do before phones could connect to cars by Bluetooth??? - I remember if someone called while I was driving, I just waited until I could pull over & phone back lol)
I admit I would've liked Motorola to release a sort of mid-month 'rollback' security update or something.. maybe even allowed people with problem to download & side install (somehow) the pre-1st August update just so that they could use their phones like they did before (I think you can with a rooted phone, but mine is unrooted).
let's hope they figure it out for the October Security Update
Click to expand...
Click to collapse
Thanks for the reply. Buying a new phone is a bit extreme. I've found that simply using a cable gives all the functionality needed with the added advantage of charging en route. Need to delete Bluetooth pairing for a quiet life.
I'll wait and watch for news of a workaround or solution.
Thanks again