I am very sorry if it is not understood very well, I am using a translator since I only speak Spanish.
Have the following tablet:
Samsung Tab 2 10.1" GT-5110
I wanted to install TWRP from Odin3.14.4 (its latest version to date), but an error came up. At that time I did not take a capture to show him.
After what happened, the following message appeared on the screen:
"firmware upgrade encountered an issue. please select recovery mode in kies & try again"
Of which I could not enter the download mode in any way, not even in the recovery mode. Only that message appeared.
I tried to fix it with Samsung's Kies, but I had no success, since it told me that there was no connection with the tablet, but my Windows could recognize the tablet, as well as Odin3, since I have installed the Samsung drivers.
So the next step I found to solve the problem was to install the original Fireware, from which I managed to get it in "Frija" and I started to install it with Odin3.
Everything was going perfectly, maybe I would be able to solve this problem that I got into, I could see that the tablet screen began to load a progress bar, but... the following error appeared, which now I did take a screenshot of.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The thing is that now the tablet has turned off completely, it has a black screen and now Windows doesn't want to recognize it. Try to disconnect the battery, try to press the power button + vol down or up, but I have no success.
The truth is that it is not the first time that I do this, and I do not understand how it is possible that it is costing me so much if the files are correct, I follow all the tutorials step by step.
Anyway, this is my last chance, I come to this forum to find out if any expert on the subject can tell me if my tablet died permanently or if there is any remote possibility of saving it.
From already thank you very much.
Related
Hello my XDA Developers I hope that you can help me with my phone, last week I bought a Droid Ultra fromo Ebay, and I received the phone but I think that it was a demo phone with a demo software from the store because the phone can not charge more than the 40%, and the app "VZW Demo"" is opened again and again doesnt matter how much I uninstall the app, I restore the phone from settings and doesnt work, I been tried to root the phone for flashing a ROOM but I cant, I been tried to return to stock the phone form this post http://forum.xda-developers.com/showthread.php?t=2580060 but im having troubles with the ADB and rebooting to the bootloader, seems like my pc doesnt recognize the phone (see images), and yes I have the USB debug enable, but with other phones my pc can recognize, the only way that my computer can recognize the droid ultra its from de recovery but from there I can not reboot to the bootloader, I downloaded the properly drivers and still nothing, I hope you guys cand help me, you are my last chance, sorry for my english its not the best im not from this country
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
will the phone boot into fastboot? with the phone off, vol down + pwr ?
I used method 2 manual flashing from the thread you linked to. It was not a developer phone, and the commands said they all failed, but the phone still returned to stock.
teerout said:
will the phone boot into fastboot? with the phone off, vol down + pwr ?
I used method 2 manual flashing from the thread you linked to. It was not a developer phone, and the commands said they all failed, but the phone still returned to stock.
Click to expand...
Click to collapse
I will try and I will say you if that works for me!
JHi all,
I have a strange issue with entering the wireless download mode on two watches.
I had R732XXU2BOKK and I flashed R732XXU2EPK5 using Odin and Wireless download mode. No problems entering it.
The watches are used without any issues, but I've noticed that Gear app on the phone reports, when checking for the Gear firmware update, that the software has been modified and it stops looking for the software update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've tried resetting the watch to factory settings and afterwards the software update can be checked for the first time, as shown below, but on the second update it fails again with the same error as on the image above.
I was curious some more and I decided to perhaps try flashing the older ROM (R732XXU2BOKK) and see if that one would be blocked from checking for the update.
To my surprise, every time I would try entering the wireless download mode, both watches would shut down and I would need to hold the power button for more than 5 sec for them to start. Once they start everything is fine and dandy. I've noticed that while entering the download mode there is a really short text written before the watch shuts down, so I recorded it and here is the screenshot of the error message.
Does it mean anything to anyone?
I wouldn't mind rooting them and putting on TWRP, but without the download mode, I'm stuck a bit.
If I would install the Tizen SDK I could use SDB commands and ultimately flash stuff, am I right?
Hello have you found a solution to this also loaded the R732XXU2EPK5 .. I think there is something wrong with this firmware that killed our wireless download mode .. and I just payed to get the new EQC1 version .. nice ...
Can confirm these issues. Any solution so far? Is firmware upgrade via USB possible?
Hi folks!!!
I have 2 galaxy note 10.1 (2012).
One of them had already put twrp several times and different roms without problem. Now there is no way to enter the recovery, it stays in the logo. I can not use odin either because it stays in get pit for mapping and from there it does not happen. I already tried to load several pits of this page but nothing. Also download an official rom but neither. There is no way to fix the tablet.
The other was never done anything, it was such a factory but, although it worked, there was no way to enter the recovery until one day did not pass the logo.
I have used windows 7 with the drivers, now there is no way and I have had to use windows 10 and if it recognizes the tablet but it still does not pass the get pit for mapping ...
I've also tried from Linux with fastboot devices but it does not recognize anything.
Any help ?. I know it's an obsolete tablet but my son worked to see the YouTube videos.
Attached 1 capture in case they are useful.
I've spent a lot of time with this problem and trying and reading but there's no way.
Thanks and sorry for bothering.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
See your identical post .
You need a service center repair .
JJEgan said:
See your identical post .
You need a service center repair .
Click to expand...
Click to collapse
Thanks. is it the only way?.
Hello, I am new to this forum and almost a complete beginner when it comes to Android.
I just found my old Samsung SM-G360F phone lying on the floor. I thought I lost it several years ago, but apparently it slipped through the bed mattress and landed on the floor where it has remained until this day.
I connected the charger and it seems that the battery still works normally. Unfortunately, I set up some password on this phone when I used it years ago, and of course, there's no way I can remember it now. So, the only way I can recover this phone is to do a factory reset.
On the Internet, I can see that the recommended method to do a factory reset on this phone is to hold the HOME key and Volume UP key, and then press the Power key and hold all three keys until the recovery mode is displayed. The problem is, I never get the recovery menu by pressing these keys, but instead I always get some kind of "ODIN MODE".
Please take a look at the screenshot I made with another phone of this ODIN MODE screen. The first picture is of this ODIN Mode screen. The second picture is what I get if I press Volume DOWN + HOME + Power On. It's some kind of download mode, which again isn't what I need right now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Could someone please help me and explain how I can do a factory reset on this phone? Thanks in advance!
Just use odin and flash your stock firmware and it would be good as new
My phone is android 10 and rooted with magisk and have TWRP recovery installed. My problem started when I updated my software to android 11. I thought everything is going smoothly but when it restart, the screen is stuck in this mode. I did the power and volume combination but it just restarts and stuck to that screen. I searched for a solution to this and found the flash tool but unfortunately, didn't work and won't flash anything although my phone is somewhat connected to the laptop because it does the sound when I plug and unplug it. I really hope that someone can help me with this because I'm not rich enough to buy a new phone and too young to work...
THIS IS THE FLASH TOOL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MY SCREEN IS LIKE THIS (I took this image from google)
Jiboi said:
My phone is android 10 and rooted with magisk and have TWRP recovery installed. My problem started when I updated my software to android 11. I thought everything is going smoothly but when it restart, the screen is stuck in this mode. I did the power and volume combination but it just restarts and stuck to that screen. I searched for a solution to this and found the flash tool but unfortunately, didn't work and won't flash anything although my phone is somewhat connected to the laptop because it does the sound when I plug and unplug it. I really hope that someone can help me with this because I'm not rich enough to buy a new phone and too young to work...
THIS IS THE FLASH TOOL
View attachment 5619817View attachment 5619815MY SCREEN IS LIKE THIS (I took this image from google)
Click to expand...
Click to collapse
hi
i can help you with that
but you should come to my telegram cause i should send you some files
telegram: moon_caliber