Database Info

[ROM] iPioneer Slim 10c v0.1 for LGV521 - Rooted, busybox, init.d, debloated, etc...

ROM Ipioneer Slim 10c v0.1
A light, clean & faster rom!!!
Disclaimer:
/***
* Your warranty is now void (and I'm sure it was void before this process).
* I am not responsible for hard or soft bricked devices, boot loops, dead or corrupt sd cards, strange behavior or you getting a heart attack 'cuz your youtube app is not working properly.
* YOU and only YOU are choosing to make these modifications, do not blame on me.... I will just ignore you.
***/
iPioneer Slim 10c v0.1 is a light, clean and fast custom rom designed for the Lg G Pad X 8.0 (T-Mobile variant only) and it's aim is to become a replacement for the default system of this device.
iPioneer Slim 10c v0.1 it is light because it only takes 519.8Mb of disk space which is a big difference when you compare the 1.2Gb of a stock rom, it is clean because it only contains the essential apps to make it work properly and it is faster because the whole system have been 100% optimized.
iPioneer it have been designed with the User Freedom in mind, it only provides you with the basic OS so you can do what you need to do on top of that.
Features:
Based on stock (10c)
Rooted
Busyboxed
Init.d Support
Extremely debloated (very serious)
Deodexed
Zipaligned
Nova as default launcher
Installation instructions:
Download the rom to your desire location (link to download to the end of this post).
Boot into Twrp recovery and do a standard wipe (factory reset).
Install the downloaded rom .zip.
Reboot the device.
Be patient, is going to take more time than a regular stock rom to boot into the system, at first is going to be stuck at T-Mobile logo but after few seconds is going to enter into App Optimization mode and after that you will be able to setup your system.
Enjoy it.
First things to do after you install this rom:
Add your google account (if you didn't complete that step at the first setup).
Download your favorite app manager (Rom Toolbox, Titanium, etc.).
Freeze the application called App Updates in order to stop the system update beacon for OTA. I removed 3 core apps in order to stop OTAs but it seems to be very integrated with the system, there is no way I can remove it from the rom without breaking the system. This is the most practical way to my knowledge right now.
Optionals things to do after you install this rom:
You can uninstall Nova Launcher if you want as is not part of the system apps, but before you need to install your favorite launcher. If you don't install another launcher and remove Nova you will have a broken system and most likely you'll have to re-flash the rom.
On purpose bugs and missing options:
On purpose bugs are bugs that comes when you remove a functionality from the system but it can not be removed from a third party component, example: LG VPN app it has been removed but the options remains in the Settings of the device and when you tap that option you will provoke a crash event, the way to resolve this is to decode the third party component (very difficult) or reinstall the missing part (in this case the LG VPN app).
iPioneer Slim 0.1 it comes without some apps that can not be removed from the system setting options, this is like that because I believe that these apps are not necessary for all people, if someone need them they can be downloaded/replaced from the Play Store or I will provide a flashable file with these apps so you can install them.
On Purpose bugs (located at settings):
From the Share & Connect menu:
File Sharing that contains BLE and Android Beam doesn't work, package SmartShare it has been removed.
Media Server (DLNA) doesn't work, package SmartShare that also contains SmartShare.MediaServer it has been removed.
Lg Airdrive doesn't work, package LGAirDrive & LGAirDriveSettings were removed.
From More>VPN menu:
LG VPN doesn't work, package VpnClient_LG it has been removed. Basic VPN it works.
From Display menu:
Home screen doesn't work, packages LGHome, HomeSelector, LGHome_Theme_Optimus, com.lge.launcher3, com.lge.launcher2.theme.optimus were removed.
If you need these options to be available on your system just download these app on Play Store if they are available or just wait until I have ready the System Apps flashable zips.​
Missing options (located at settings):
Smart Cleaning not present, package LGSpringCleaning it has been removed.
Cloud (cloud integration in settings) not present, package CloudHub (maybe dependant on SmartShare package) it has been removed, please also note that this cloud integration it was integrated on the stock File Manager, so... if you want a full integration of the Cloud service on settings maybe you will have to install the stock File Manager provided by LGFileManager package.
From Backup & reset menu:
LG Backup is not present, packages LGBackupLauncher and LGBackup were removed.
From About tablet menu:
Update Center and its content (App updates & System updates) is not present, packages com.lge.appbox.client (app updates), com.lge.updatecenter & LGUpdateCenter (main menu for updates) were removed.
If you need these options to be available on your system just download these app on Play Store if they are available or just wait until I have ready the System Apps flashable zips.​Flashable zip with system apps:
Coming soon when I have a free time.
What to do if you get the OTA notification:
Freeze the app called App Updates with your favorite app manager.
With your favorite file manager go to /cache and delete the update.zip (the downloaded ota).
Tap on Restart & Install button on OTA pop-up, the pop-up it will start counting to 0 in order to restart but your device won't restart because there are 3 core apps removed from this rom plus 1 app that you just disabled (all these 4 app controls the OTA), the notification is just gonna disappear, push recent button and clear the ota pop-up window.
Bugs Report:
If you find a bug in this rom just notify me about that in this thread, please, just use the title as "Bug Report" so I can pay close attention to that, my time is very limited. Thank you.
Feature Request:
If you want a feature to be added into future revisions of this rom just notify me about that in this thread, please, just use the title as "Feature Request" so I can pay close attention to that, my time is very limited. Thank you.
More info:
-------------------------------------
Device: Lg G Pad X 8.0
Model: LGV521
Code Name: b3
Carrier: T-Mobile
Android version: 6.0.1
Security patch level: 2016-07-01
Software version: V52110c
Link: https://www.androidfilehost.com/?fid=385035244224403624

Screenshots:
Default View: (sorry guys, I was not able fix Nova in order to show an organized and clean layout by default).
Default App Drawer: remember this is an extremely debloated rom, only the most basic core apps remains.
Settings view, yes some options are not present, read above about this.
Software info.

Reserved 2...

For some reason this post doesn't show up on ET page: lg-g-padx
Too bad, a lot of people won't be able to see this rom, but I can do nothing.
If someone knows an admin who can fix this issue please make mention of this post to him. I would do it but I don't have the time to.
Thank you.

Some screenshots added on post #2...

How fast does it run compared to the stock rom?

Munns86 said:
How fast does it run compared to the stock rom?
Click to expand...
Click to collapse
How fast it can go is a subjective matter:
It will depend on hardware lifetime span (how you use it and how other people use this tablet).
It will depend how much apps and content you put in it (the more things you download the more slow android is gonna be, this is kind a Swap area).
I did not do a benchmark, when I declared that is faster than a stock rom is because that speed response enhacement it comes based on the Deodex and Zipalign process. It can be or maybe not noticeable to your eyes but based on deodex and zipalign process is for sure that is faster than an odex and not-zipaligned rom.
The best answer is that you need to try it on your own and see the difference.
Sent from my LG-H918 using Tapatalk

Poll added at the beginning (not visible in tapatalk or xda app).
Please only select the apps that you really need or you really think that should comes with the next revision of iPioneer Slim rom.
This will help me to build a better version with features that users needs.

C'mon guys... only 3 users have use the poll...
I need more data background in order to release a new version of the Slim line version (may be the last one).
All V521 users please contribute with this.
Right now I'm testing a new build that it seems to have success stoping ota download and notification & I have removed even more bloat background packages.
As of today I start the syncing process of CyanogenMod for our device, so all I ask is that V521 users vote in the poll so I can build and release what I think it would be the last Slim version (iPioneer Slim 0.2) based on users needs.
Once I start the developtment with CM I will not pay attentions to the Stock & Slim version until I finish with what is gonna become iPioneer CM 13.
Thank you for your attention guys.
BTW: sorry for my english, I try so hard to write all this in a good way. Arriba Mexico Papa!!!

xtremelora said:
C'mon guys... only 3 users have use the poll...
I need more data background in order to release a new version of the Slim line version (may be the last one).
All V521 users please contribute with this.
Right now I'm testing a new build that it seems to have success stoping ota download and notification & I have removed even more bloat background packages.
As of today I start the syncing process of CyanogenMod for our device, so all I ask is that V521 users vote in the poll so I can build and release what I think it would be the last Slim version (iPioneer Slim 0.2) based on users needs.
Once I start the developtment with CM I will not pay attentions to the Stock & Slim version until I finish with what is gonna become iPioneer CM 13.
Thank you for your attention guys.
BTW: sorry for my english, I try so hard to write all this in a good way. Arriba Mexico Papa!!!
Click to expand...
Click to collapse
The reason is that the xda app can't see the vote going on.
Personally, I will be excited to see a cm/aosp custom build, which will sure draw much more attention.

googlephone said:
The reason is that the xda app can't see the vote going on.
Click to expand...
Click to collapse
But it is visible and operable through a normal web browser in android: http://forum.xda-developers.com/lg-...ioneer-slim-0-1-lg-g-pad-x-8-0-t3513030/page1
Or the option LOAD IN BROWSER in xda app and WEB VIEW in tapatalk...

xtremelora said:
But it is visible and operable through a normal web browser in android: http://forum.xda-developers.com/lg-...ioneer-slim-0-1-lg-g-pad-x-8-0-t3513030/page1
Or the option LOAD IN BROWSER in xda app and WEB VIEW in tapatalk...
Click to expand...
Click to collapse
Another reason is not many users are interested enough in a slimmed stock rom. The benefits of a slimmed stock rom may include less system storage usage. But the free uped system storage is not accessible for users to use as data storage anyway. Speedwise, I wouldn't expect noticeable improvement from a slimmed stock rom. As a result, the benefits of a slimmed stock rom is not enough to draw users' attention or interest.
I am a flashholic but I actually not interested in slimmed stock at all because I already have root.
I personally advise you to not spend too much time on modified stock rom.
I appreciate your work and look forward to your future possible cm rom, which I will definitely try it out and will draw many g pad x users here. And don't forget there is a bounty for custom roms like cm.

googlephone said:
Another reason is not many users are interested enough in a slimmed stock rom. The benefits of a slimmed stock rom may include less system storage usage. But the free uped system storage is not accessible for users to use as data storage anyway. Speedwise, I wouldn't expect noticeable improvement from a slimmed stock rom. As a result, the benefits of a slimmed stock rom is not enough to draw users' attention or interest.
I am a flashholic but I actually not interested in slimmed stock at all because I already have root.
I personally advise you to not spend too much time on modified stock rom.
I appreciate your work and look forward to your future possible cm rom, which I will definitely try it out and will draw many g pad x users here. And don't forget there is a bounty for custom roms like cm.
Click to expand...
Click to collapse
You are right about working in a stock version. The reason why I'm doing this is because we all know that CM most of the time has bugs, bluetooh problems, camera issues, data conectivity troubles, etc...
Sooooo, if the version of CM I'm going to compile it results with many bugs there is gonna be the option to go back to stock slimed or stock bloated.
I can build a CM verion but Im not the kind of guy who inverts his time in CODE MODIFICATION, so hopefully the build it comes with no bugs at all or at least no major bugs.
The other alternative is that I can sync, compile and build and one more guys can do the bug fixes.

xtremelora said:
You are right about working in a stock version. The reason why I'm doing this is because we all know that CM most of the time has bugs, bluetooh problems, camera issues, data conectivity troubles, etc...
Sooooo, if the version of CM I'm going to compile it results with many bugs there is gonna be the option to go back to stock slimed or stock bloated.
I can build a CM verion but Im not the kind of guy who inverts his time in CODE MODIFICATION, so hopefully the build it comes with no bugs at all or at least no major bugs.
The other alternative is that I can sync, compile and build and one more guys can do the bug fixes.
Click to expand...
Click to collapse
That would be great! I think if you took a poll most people would prefer a CM build to a slimmed down stock build.

Munns86 said:
That would be great! I think if you took a poll most people would prefer a CM build to a slimmed down stock build.
Click to expand...
Click to collapse
Yeah, I know that. Wish me luck.
Right now I'm stuck trying to get the Blobs for this device and compiling the kernel so I can build the CM recovery, once I have the recovery done I can start compiling CM and start testing.
I'm trying to by pass the kernel (as is not need it right now to build the recovery) but for some reason the system is demanding an standard and working kernel... weird...
But honestly speaking is gonna take lot of time. So be patient guys.

xtremelora said:
Yeah, I know that. Wish me luck.
Right now I'm stuck trying to get the Blobs for this device and compiling the kernel so I can build the CM recovery, once I have the recovery done I can start compiling CM and start testing.
I'm trying to by pass the kernel (as is not need it right now to build the recovery) but for some reason the system is demanding an standard and working kernel... weird...
But honestly speaking is gonna take lot of time. So be patient guys.
Click to expand...
Click to collapse
There is already a TWRP recovery for v521. Why you need to compile cm recovery?

googlephone said:
There is already a TWRP recovery for v521. Why you need to compile cm recovery?
Click to expand...
Click to collapse
Ik, is just a prebuilt because our device doesnt have a device tree or structure already, so making this at first is gonna help me to buil the cm zip.
Is not need it if a device tree already exist but not in this case, just see it like a pretesting of code for this device.
When I try to compile this recovery things are gonna break so you get info of what is missing, what you need, log, etc... So you fix everything you can in this step and then you build the cm.zip in a better way (less issues).
Sent from my LG-H918 using Tapatalk

xtremelora said:
Ik, is just a prebuilt because our device doesnt have a device tree or structure already, so making this at first is gonna help me to buil the cm zip.
Is not need it if a device tree already exist but not in this case, just see it like a pretesting of code for this device.
When I try to compile this recovery things are gonna break so you get info of what is missing, what you need, log, etc... So you fix everything you can in this step and then you build the cm.zip in a better way (less issues).
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
https://github.com/Shabbypenguin/android_device_lge_b3
device tree has been around for a while, it obviously will need some renaming to work for cm source but its a good foundation to start with.

shabbypenguin said:
https://github.com/Shabbypenguin/android_device_lge_b3
device tree has been around for a while, it obviously will need some renaming to work for cm source but its a good foundation to start with.
Click to expand...
Click to collapse
These are your device tree for twrp 4 b3 right?
Let me see if I can work with that, I was almost done building the cm.recovery and fixing some boot.img issues but if I can take your files that would save time.
Did you forked that device tree or u just build it from scratch?
If you forked them, from what device?
I was thinking on pulling the v500 just to figure out some sort of missing info I havent been able to catch from ramdisk.

xtremelora said:
These are your device tree for twrp 4 b3 right?
Let me see if I can work with that, I was almost done building the cm.recovery and fixing some boot.img issues but if I can take your files that would save time.
Did you forked that device tree or u just build it from scratch?
If you forked them, from what device?
I was thinking on pulling the v500 just to figure out some sort of missing info I havent been able to catch from ramdisk.
Click to expand...
Click to collapse
i built it from scratch, id be careful looking too much at the v500, it's a snapdragon 600 SOC which is very old and is a quad core. the 615 in the g pad x is octacore and much newer. even the ramdisk is going to have big differences in how its handled.

[ROM][OFFICIAL] LineageOS 14.1 Nightlies for the Verizon Samsung Galaxy S3 (d2vzw)

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Download Links
LineageOS:
Downloads: https://download.lineageos.org/d2vzw
Google apps addon:
OpenGapps: http://opengapps.org/ (you'll want a zip for the ARM platform, Android version 7.1)
HEADS UP: Be sure you flash the gapps package with your rom. If you boot your rom, then go back and try to flash gapps after the fact, you're gonna have a bad time.
Firmware:
Your best bet is to be on the MF1 bootstack/NE1 modem combo. Here's a flashable zip (this only needs to be done once): http://www.invisiblek.org/firmware/d2/d2vzw_MF1_firmware_NE1_modem.zip
Misc Links
Changelog:
Link: https://download.lineageos.org/d2vzw/changes/
Learn to build yourself:
Link: https://wiki.lineageos.org/devices/d2vzw/build
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[ROM][OFFICIAL] LineageOS 14.1 Nightlies for the Verizon Samsung Galaxy S3 (d2vzw), ROM for the Verizon Samsung Galaxy S III
Contributors
invisiblek
Source Code: http://github.com/LineageOS
ROM OS Version: 7.x Nougat
Version Information
Status: Nightly
Created 2016-12-05
Last Updated 2016-12-05

reserved

Hallelujah!
Is this the eighth or ninth life of this great phone?

@invisiblek, are there plans for the release of a Snapshot of CM13.0 for the d2vzw?

Congratulations on the "official" release!! Thank you for such an excellent and stable ROM for our ooooold, but no longer irrelevant, s3!

Nice job! Wich partitions can I mount as f2fs?

Just out of curiosity regarding the CM14.1...
Anyone having issue with internet connectivity specifically with the Play Store only (downloaded from Open GApps)?
Also, is anyone having issues with their external MicroSD. Though the external MicroSD can be viewed and can browse it, I'm Specifically stating the inability to execute, open, write to, etc...?
I had already sent the issues I'm having along with all my log files to @invisiblek and was curious as to any others experiencing the same/similar issues I experienced.
Thank you all for your time and understanding!

Thank you @invisiblek and other contributors. This is a great rom for this old phone. My DD is a LG G4, again, I went back to that after three Note 7's and all that drama. It's sad when a years old Galaxy S3 is running the latest and greatest but my LG G4 is still on last years Android! Yikes
I'm only using the SGS3 as a Wifi device so I can't comment on Cell radio functions but it's very smooth and seems markedly faster than when I was last using it as a DD. The only issue I've had and it may not even be related to this rom... I wanted to use Chainfire's PryFi to stick it to Kohls and Walmart that use WiFi Mac trackers, but when I launch PryFi and turn it on, it almost immediately crashes no matter what I do. Wipe cache, dalvik, reset and I get the same thing.
Thanks for the great work. Much appreciated!

@invisiblek, I'm reading elsewhere that the CM14.x should be installed first, then after the setup is accomplished, reboot back in to the recovery, then flash the GApps package.
Is this correct?
I just wanted to be sure in regards to the unconventional method of flashing the CM and the GApps together then reboot.
But, as you may know, after installing the 2 conventionally, I'm having trouble with the Play Store as well as the External MicroSD after setup.
I'd really appreciate your confirmation.
Thanks a Bunch!
Sent from my d2vzw using XDA Labs

Ibuprophen said:
@invisiblek, I'm reading elsewhere that the CM14.x should be installed first, then after the setup is accomplished, reboot back in to the recovery, then flash the GApps package.
Is this correct?
I just wanted to be sure in regards to the unconventional method of flashing the CM and the GApps together then reboot.
But, as you may know, after installing the 2 conventionally, I'm having trouble with the Play Store as well as the External MicroSD after setup.
I'd really appreciate your confirmation.
Thanks a Bunch!
Sent from my d2vzw using XDA Labs
Click to expand...
Click to collapse
I had a problem installing the first time - I put build+Open GApps Aroma in the que and when the Aroma install was supposed to come up everything went black but the phone was still on. I flashed one and then the other without booting and it booted into initial setup normally.
But, I created a Nandroid with TWRP 2.8.7.0 and tried to restore the last Unofficial 14.1 build nandroid that worked normally but I couldn't get the sim card to work. Same when I tried to restore the new official. I tried numerous different ways to hold my mouth but it would never mount the SIM and settings was crapped out. I was able to restore my last MM nandroid and have it work normally. I've just switched to the latest TWRP 3.x.x.x. Don't know if that has anything to do with it....
I'm clean installing the new official again! It got stuck on boot (wrong boot animation, too) but pulling the batt and restarting, it went normally. (My Tibu settings were in the /data wipe. Gotta mount one and pull them )

Master Cylinder said:
I had a problem installing the first time - I put build+Open GApps Aroma in the que and when the Aroma install was supposed to come up everything went black but the phone was still on. I flashed one and then the other without booting and it booted into initial setup normally.
But, I created a Nandroid with TWRP 2.8.7.0 and tried to restore the last Unofficial 14.1 build nandroid that worked normally but I couldn't get the sim card to work. Same when I tried to restore the new official. I tried numerous different ways to hold my mouth but it would never mount the SIM and settings was crapped out. I was able to restore my last MM nandroid and have it work normally. I've just switched to the latest TWRP 3.x.x.x. Don't know if that has anything to do with it....
I'm clean installing the new official again! It got stuck on boot (wrong boot animation, too) but pulling the batt and restarting, it went normally. (My Tibu settings were in the /data wipe. Gotta mount one and pull them )
Click to expand...
Click to collapse
Thank you for your response!
I always had the latest TWRP 3.0.2-0 installed.
I flashed the CM14.1 20161207, Open GApps Pico 20161207 and, at first, SuperSU 2.78 Stable then when I retried a fresh install, i used SuperSU 2.78 SR5.
The same issues occurred (primarily) with the Play Store not being able to access the Internet the Internet and being able to see everything on my External MicroSD but, still not being able to read, write, move copy, install, etc...
I did see, during the initial bootup where you have the initial setup of CM & Google, the Google setup went fine but, I did notice that the carrier name reflected "no service" or "unknown" or something similar. I had ventured in to the network settings and did see everything needed in there so I didn't give it another thought.
To be honest, my opinion is that i really don't think that the release of the OFFICIAL CM14.1 Nightly was not ready yet.
I had to E-mailed @invisiblek the list of issues along with the installation log files from both the CM14.1 and the GApps but, I haven't even received an acknowledgement of at least a thank you.
@invisiblek is listed as the primary point of contact for Cyanogenmod and other than e-mailing him along with posting the issue here to his attention, I'm not sure how else to report any issues/feedback to Cyanogenmod... Cyanogenmod doesn't really pay attention to their own forums that has resulted in most individuals not even bothering with posting anything there anymore.
I'm personally going to put CM14.1 on hold till there's either some indication of improvement or finding some information reflecting my issues with some fixes, tryouts, solutions, etc...
I'm real disappointed with this...
Sent from my d2vzw using XDA Labs

Ibuprophen said:
Thank you for your response!
I always had the latest TWRP 3.0.2-0 installed.
I flashed the CM14.1 20161207, Open GApps Pico 20161207 and, at first, SuperSU 2.78 Stable then when I retried a fresh install, i used SuperSU 2.78 SR5.
The same issues occurred (primarily) with the Play Store not being able to access the Internet the Internet and being able to see everything on my External MicroSD but, still not being able to read, write, move copy, install, etc...
I did see, during the initial bootup where you have the initial setup of CM & Google, the Google setup went fine but, I did notice that the carrier name reflected "no service" or "unknown" or something similar. I had ventured in to the network settings and did see everything needed in there so I didn't give it another thought.
To be honest, my opinion is that i really don't think that the release of the OFFICIAL CM14.1 Nightly was not ready yet.
I had to E-mailed @invisiblek the list of issues along with the installation log files from both the CM14.1 and the GApps but, I haven't even received an acknowledgement of at least a thank you.
@invisiblek is listed as the primary point of contact for Cyanogenmod and other than e-mailing him along with posting the issue here to his attention, I'm not sure how else to report any issues/feedback to Cyanogenmod... Cyanogenmod doesn't really pay attention to their own forums that has resulted in most individuals not even bothering with posting anything there anymore.
I'm personally going to put CM14.1 on hold till there's either some indication of improvement or finding some information reflecting my issues with some fixes, tryouts, solutions, etc...
I'm real disappointed with this...
Sent from my d2vzw using XDA Labs
Click to expand...
Click to collapse
I'll attempt to try to help with some of the issues here, as I have direct contact with invisiblek pretty much daily. First I will start off with a few questions, NOT poking, just asking, this also may address some previous posts as well... You have a verizon SCH-I535 correct, and not another variant? Just making sure. And to start you wiped data in TWRP (wipe to install new ROM option basically). Told it to flash your 12/07 build? Did you ADD the "opengapps 7.1 ARM Pico" build to the multiple flash option, or did you flash rom, then go back in and flash opengapps? After it rebooted, it sometimes takes a while to get the setup to actually start and display, sometimes it goes to a black screen for minutes, but be patient, it will come.. At that point in time, it will initialize sim card and be connected, as this was my experience on all 3 of my S3 phones in my household. Then proceed through setup...
Is your external card formatted as "portable storage", or is it formatted as "Adopted storage". Also what type of filesystem do you have the card formatted with? What file manager are you using to try to access your card with? There was some expected changes that might have to be worked out as the "unofficial" roms were running Selinux in permissive mode, and the "official" roms are running it in Enforcing mode. That is bound to cause some small differences in the way the 2 roms behave. Also, I need to ask why you are trying to install SuperSU on a rom that already has Root (and the ability to manage it) built into the rom? There might be some issues being caused by that in itself.
I know that personally BusyBox (I rely on it daily) will NOT install on the official for me, but installs fine on the unofficials. Also, I have had limited luck with the built in file manager. I have used ES File Explorer forever, and it continues to behave well on this rom. Also, even if you are going to nandroid back and forth between official and unofficial, it is best to do a wipe of DATA before the nandroid... As far as the play store goes, I haven't experienced any lack of connectivity. I do get very small intermittent blips where it seems like it isn't connected for a second or 2, but it is very rare, and it has always been like that as far as I can remember.. Part of the reason that is for me is because I use a network extender, and it has always been the achilles heel with CM.
Try going into TWRP, do the "wipe to install new rom", add the cm zip, and ALSO add the latest "Opengapps arm 7.1 pico or micro" (your choice) build into the zip queue so that they are flashed in succession. Let it rip, and see if that offers you any different results. After you get it initially setup, go into developer options and enable root as needed. Give it a run and see what issue are still present, if any. I am surprised to hear some of these issues, as between myself, my kids, and a handful of friends, everyone is super stoked at how well these early builds are running... I myself have less than 3 reported issues from friends that we are looking into, and they are all just cosmetic bugs so far... I will be glad to try to help in any way possible..
P.S. There have been quite a few things resolved/changed between TWRP 2.8.7.0 and 3.0.2-0, I would highly suggest not only upgrading to the latest TWRP version, but also making sure you are on the firmware versions that are mentioned in the OP.
Stealth111

Stealth111 said:
I'll attempt to try to help with some of the issues here, as I have direct contact with invisiblek pretty much daily. First I will start off with a few questions, NOT poking, just asking, this also may address some previous posts as well... You have a verizon SCH-I535 correct, and not another variant? Just making sure. And to start you wiped data in TWRP (wipe to install new ROM option basically). Told it to flash your 12/07 build? Did you ADD the "opengapps 7.1 ARM Pico" build to the multiple flash option, or did you flash rom, then go back in and flash opengapps? After it rebooted, it sometimes takes a while to get the setup to actually start and display, sometimes it goes to a black screen for minutes, but be patient, it will come.. At that point in time, it will initialize sim card and be connected, as this was my experience on all 3 of my S3 phones in my household. Then proceed through setup...
Is your external card formatted as "portable storage", or is it formatted as "Adopted storage". Also what type of filesystem do you have the card formatted with? What file manager are you using to try to access your card with? There was some expected changes that might have to be worked out as the "unofficial" roms were running Selinux in permissive mode, and the "official" roms are running it in Enforcing mode. That is bound to cause some small differences in the way the 2 roms behave. Also, I need to ask why you are trying to install SuperSU on a rom that already has Root (and the ability to manage it) built into the rom? There might be some issues being caused by that in itself.
I know that personally BusyBox (I rely on it daily) will NOT install on the official for me, but installs fine on the unofficials. Also, I have had limited luck with the built in file manager. I have used ES File Explorer forever, and it continues to behave well on this rom. Also, even if you are going to nandroid back and forth between official and unofficial, it is best to do a wipe of DATA before the nandroid... As far as the play store goes, I haven't experienced any lack of connectivity. I do get very small intermittent blips where it seems like it isn't connected for a second or 2, but it is very rare, and it has always been like that as far as I can remember.. Part of the reason that is for me is because I use a network extender, and it has always been the achilles heel with CM.
Try going into TWRP, do the "wipe to install new rom", add the cm zip, and ALSO add the latest "Opengapps arm 7.1 pico or micro" (your choice) build into the zip queue so that they are flashed in succession. Let it rip, and see if that offers you any different results. After you get it initially setup, go into developer options and enable root as needed. Give it a run and see what issue are still present, if any. I am surprised to hear some of these issues, as between myself, my kids, and a handful of friends, everyone is super stoked at how well these early builds are running... I myself have less than 3 reported issues from friends that we are looking into, and they are all just cosmetic bugs so far... I will be glad to try to help in any way possible..
P.S. There have been quite a few things resolved/changed between TWRP 2.8.7.0 and 3.0.2-0, I would highly suggest not only upgrading to the latest TWRP version, but also making sure you are on the firmware versions that are mentioned in the OP.
Stealth111
Click to expand...
Click to collapse
Okay... I tried to sort out and answer all the questions the best i could.
I also attached the log files. They are dated according to the Nightly releases.
Q: You have a verizon SCH-I535 correct, and not another variant?
A: Yes. I have an SCH-I535.
Q: And to start you wiped data in TWRP (wipe to install new ROM option basically).
A: 1) Factory Reset. 2) Wipe Dalvik, Data, Internal Storage, Cache and System. 3) Format Data. Then Restart Recovery back to TWRP.
Q: Told it to flash your 12/07 build?
Did you ADD the "opengapps 7.1 ARM Pico" build to the multiple flash option, or did you flash rom, then go back in and flash opengapps?
A: Install and select CM14.1 12/07 build then the Open GApps 7.1 ARM Pico. To add... I tried flashing the 2 above only, then tried the same 2 above with SuperSU 2.78 Stable, lastly the 2 above with SuperSU 2.78 SR5. All resulted with the same issues.
Q: Is your external card formatted as "portable storage", or is it formatted as "Adopted storage".
A: Portable Storage.
Q: Also what type of filesystem do you have the card formatted with?
A: VFAT
Q: What file manager are you using to try to access your card with?
A: Stock & ES File Explorer Pro
Q: Also, I need to ask why you are trying to install SuperSU on a rom that already has Root (and the ability to manage it) built into the rom?
A: I'm aware of the stock root manager but, i've always preferred SuperSU's root management.
I really appreciate your assistance and please don't hesitate to defer to @invisiblek if necessary.
Also, please keep in mind that I'm not in a race. Take your time because patience is a virtue...
Thank you very much!!!
I wonder if the GApps issue is the underlying issue. I hope @MastahF & @Rapper_skull is aware of and working on it?
Sent from my d2vzw using XDA Labs

Stealth111 said:
I know that personally BusyBox (I rely on it daily) will NOT install on the official for me, but installs fine on the unofficials.
Stealth111
Click to expand...
Click to collapse
I installed Stericson BusyBox Pro using Google Play and it works fine! Lucky me!
Ibuprophen said:
Okay... I tried to sort out and answer all the questions the best i could.
I also attached the log files. They are dated according to the Nightly releases.
Q: You have a verizon SCH-I535 correct, and not another variant?
A: Yes. I have an SCH-I535.
Q: And to start you wiped data in TWRP (wipe to install new ROM option basically).
A: 1) Factory Reset. 2) Wipe Dalvik, Data, Internal Storage, Cache and System. 3) Format Data. Then Restart Recovery back to TWRP.
Q: Told it to flash your 12/07 build?
Did you ADD the "opengapps 7.1 ARM Pico" build to the multiple flash option, or did you flash rom, then go back in and flash opengapps?
A: Install and select CM14.1 12/07 build then the Open GApps 7.1 ARM Pico. To add... I tried flashing the 2 above only, then tried the same 2 above with SuperSU 2.78 Stable, lastly the 2 above with SuperSU 2.78 SR5. All resulted with the same issues.
Click to expand...
Click to collapse
I know this may sound funny but I've had this EXACT response from clean installs using the tiny GApps packages. Try one of the larger ones or the Aroma installer. (I know it's annoying if you want to keep all that crap off your phone ...)
As I said, I installed without using the qeue. I also wiped Dalvik/cache AFTER the installations, as per the OpenGApps instructions.
Oh, and my phone is purring like a kitten with 12/7 on it! XD
PS - Except for that dang restore issue. Scared to try it again but I gotta try it again eventually.

Master Cylinder said:
I installed Stericson BusyBox Pro using Google Play and it works fine! Lucky me!
Click to expand...
Click to collapse
I have the same version as well. I go to the store, click install on the Pro version. It installs just fine... I then go in and open the program, it immediately asks for the needed root permissions, which I promptly give it, then I close the welcome message. When I actually then click install from within the program, it then tries to install for about 2 seconds and then says "oops, it looks like the installation was unsuccessful, maybe try a different location"....
Who knows.... :laugh:
Other than that, I agree, purring like a kitten!
Stealth111

Master Cylinder said:
I installed Stericson BusyBox Pro using Google Play and it works fine! Lucky me!
I know this may sound funny but I've had this EXACT response from clean installs using the tiny GApps packages. Try one of the larger ones or the Aroma installer. (I know it's annoying if you want to keep all that crap off your phone ...)
As I said, I installed without using the qeue. I also wiped Dalvik/cache AFTER the installations, as per the OpenGApps instructions.
Oh, and my phone is purring like a kitten with 12/7 on it! XD
PS - Except for that dang restore issue. Scared to try it again but I gotta try it again eventually.
Click to expand...
Click to collapse
I tried the nano on one attempt thinking that pico was the culprit but, the same issue...
Sent from my d2vzw using XDA Labs

Sorry to ask this again but wich partitions should be remounted as f2fs for better performance?
Sent from my Pixel using XDA Forums Pro.

Ibuprophen said:
I tried the nano on one attempt thinking that pico was the culprit but, the same issue...
Sent from my d2vzw using XDA Labs
Click to expand...
Click to collapse
I had the same problem with Nano. If you're gonna spend the time to do it, go big. Bigger rather than smaller.

Pierre2324 said:
Sorry to ask this again but wich partitions should be remounted as f2fs for better performance?
Click to expand...
Click to collapse
Here's a link that, i believe, will answer your question:
http://forum.xda-developers.com/showthread.php?t=2537119
Good Luck!
Sent from my d2vzw using XDA Labs
---------- Post added at 02:14 AM ---------- Previous post was at 01:54 AM ----------
Master Cylinder said:
I had the same problem with Nano. If you're gonna spend the time to do it, go big. Bigger rather than smaller.
Click to expand...
Click to collapse
There was a member in the GApps thread who had mentioned that he had a similar issue.
He stated that what worked for him was flashing a GApps Pico package on from about 30 days ago.
I believe that others had to flash their GApps packages from about 30 days ago had worked for them.
I know that this is an issue for many others who also reported it to the Dev(s).
I can't think of what in the world is going on...
Sent from my d2vzw using XDA Labs

Running smooth as ice.......only issue I've had was a single browser hicup. Incredible work, makes me smile knowing I have a newer version on my ancient phone than most of the $700+ flagship phones. Invisablek you sir are the man:good:

SRGX2 Rom for the Life One X2 Mini

SRGX2 for Life One X2 Mini​This Rom Is a Stripped down modified version of the Life One X2 Mini stock Rom.
NOTE: After installation give Launcer 3 notification permission and update Google Play Services (click on the notification).
(Please remember I do this in my free time and with my own money. If you like it please hit the thanks button)
Mods:
Malware removed
Build.prop Tweaks
Oreo Launcher
Camera app replaced by OpenCamera
File manager replaced by MiXplorer
To do list:
Build wifi drivers into the Kernel
Strip down rc scripts
What Works:
Boots
Calls
SMS
Data
GPS
Wifi
Bluetooth
Audio
Video Playback
Sensors
Led
Camera
Flash
Fingerprint
Not Working Yet:
(You tell me)
Downloads:
Current Build: https://www.androidfilehost.com/?fid=673956719939824825
Builds: https://www.androidfilehost.com/?w=files&flid=239712
Patches: https://www.androidfilehost.com/?w=files&flid=254440
TWRP: https://drive.google.com/file/d/0BzMHnGbQH3bhTERvcGxlSkZFa2M/view?usp=sharing
Kernel: https://github.com/vampirefo/android_kernel_blu_kernel_x2 (Special thanks to @vampirefo for the kernel source)

Screenshots: comming soon

Changelog
Version: Testing
Build: 01072018211020
Initial release
Version: rc1
Build: 01142018205847
switched to stock theme
Version: 1.1.0
Build: 02182018215948
rebuild off of the 01/04/2018 update
Version: 1.1.1
Build: 02242018165134
fixed mobile data bug
Version: 1.1.2
Build: 03032018224915
changed DPI to 441
added stock calendar app
added stock calculator app
add stock clock app

Troubleshooting

reserved

Does quick charge work?

Been running for a couple of days now without issue.

cyrusharding said:
Does quick charge work?
Click to expand...
Click to collapse
Yes it works, I've beeen using 2 QC3 chargers with no problems at all.

Awesome, works great so far. Here are a few things I noticed :
1- Keyboard didn't show up easily during setup, but eventually it became smooth
2- Following apps did not install (Package Helper error) : Fitbit & Spotify. Spotify was a known issue in stock rom but Fitbit was working fine in stock.
3- Netflix is not available. Previously I had LineageOS 13 and I was able to install Netflix. I know they banned uncertified devices, but I was still able to get it with that rom.
4- Fingerprint is not working 100%. I am able to unlock the device with it but apps are not able to use it properly. For example try Starbucks or any banking app. They will ask if you want to use fingerprint, you say yes and you put your finger, some apps crash, others will say fingerprint recognized, but then they don't actually store/use that fingerprint? Something must have gone wrong... LineageOS 13 also had this issue, but stock rom did not.
I would like to know if it's possible to not have the customizations you did for colors. Blue (pun not intended) hurts my eyes and transparency doesn't look great with some apps open. Also, if you go to device encryption, because you changed colors, some foreground and background colors are now identical and I wasn't able to read the options... I think that screen was the one for if I wanted to ask for password when the device boots.
Also do you have a git for the source tree? I'm learning to build Android and am hoping to see how you are doing things?
Thanks again and keep it up!

enduo said:
Awesome, works great so far. Here are a few things I noticed :
1- Keyboard didn't show up easily during setup, but eventually it became smooth
2- Following apps did not install (Package Helper error) : Fitbit & Spotify. Spotify was a known issue in stock rom but Fitbit was working fine in stock.
3- Netflix is not available. Previously I had LineageOS 13 and I was able to install Netflix. I know they banned uncertified devices, but I was still able to get it with that rom.
4- Fingerprint is not working 100%. I am able to unlock the device with it but apps are not able to use it properly. For example try Starbucks or any banking app. They will ask if you want to use fingerprint, you say yes and you put your finger, some apps crash, others will say fingerprint recognized, but then they don't actually store/use that fingerprint? Something must have gone wrong... LineageOS 13 also had this issue, but stock rom did not.
I would like to know if it's possible to not have the customizations you did for colors. Blue (pun not intended) hurts my eyes and transparency doesn't look great with some apps open. Also, if you go to device encryption, because you changed colors, some foreground and background colors are now identical and I wasn't able to read the options... I think that screen was the one for if I wanted to ask for password when the device boots.
Also do you have a git for the source tree? I'm learning to build Android and am hoping to see how you are doing things?
Thanks again and keep it up!
Click to expand...
Click to collapse
try "dogfood spotify" i had same issue and got that to work on the lineageos 13 blox2mini ROM.

cyrusharding said:
try "dogfood spotify" i had same issue and got that to work on the lineageos 13 blox2mini ROM.
Click to expand...
Click to collapse
Interesting, didn't know that exists. I currently just download off of http://download.spotify.com/android/SpotifyAndroid.apk

enduo said:
Awesome, works great so far. Here are a few things I noticed :
1- Keyboard didn't show up easily during setup, but eventually it became smooth
2- Following apps did not install (Package Helper error) : Fitbit & Spotify. Spotify was a known issue in stock rom but Fitbit was working fine in stock.
3- Netflix is not available. Previously I had LineageOS 13 and I was able to install Netflix. I know they banned uncertified devices, but I was still able to get it with that rom.
4- Fingerprint is not working 100%. I am able to unlock the device with it but apps are not able to use it properly. For example try Starbucks or any banking app. They will ask if you want to use fingerprint, you say yes and you put your finger, some apps crash, others will say fingerprint recognized, but then they don't actually store/use that fingerprint? Something must have gone wrong... LineageOS 13 also had this issue, but stock rom did not.
I would like to know if it's possible to not have the customizations you did for colors. Blue (pun not intended) hurts my eyes and transparency doesn't look great with some apps open. Also, if you go to device encryption, because you changed colors, some foreground and background colors are now identical and I wasn't able to read the options... I think that screen was the one for if I wanted to ask for password when the device boots.
Also do you have a git for the source tree? I'm learning to build Android and am hoping to see how you are doing things?
Thanks again and keep it up!
Click to expand...
Click to collapse
I'm doing my mods on the precompiled factory rom. If you go to the Lineage OS thread, Vampirefo has a link to the device and vendor tree he created for his rom. I am considering having two versions of my rom for the Mini. A light theme (stock) and dark theme the one that is out now. Right now the rom is only in testing stage. I enjoy seeing your interest in learning how to do what I am doing, the more developers the better.
Thanks for you feedback, here are some helpful links. I am a Linux user and my links may be geared toward Linux, some things can be done in Windows, but some require Linux.
Lineage OS for the Mini: https://forum.xda-developers.com/android/development/lineageos-13-life-one-x2-mini-t3692814 (has links to his device and vendor tree)
How to compile an Android kernel: https://forum.xda-developers.com/le-2/how-to/guide-compiling-64-bit-android-kernel-t3512749 (I'm still trying to locate the Mini kernel source)
Tool to unpack and repack a rom: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
tool for unpacking apks: https://ibotpeaches.github.io/Apktool/
I hope these help you and enjoy

srgrusso said:
I'm doing my mods on the precompiled factory rom. If you go to the Lineage OS thread, Vampirefo has a link to the device and vendor tree he created for his rom. I am considering having two versions of my rom for the Mini. A light theme (stock) and dark theme the one that is out now. Right now the rom is only in testing stage. I enjoy seeing your interest in learning how to do what I am doing, the more developers the better.
Thanks for you feedback, here are some helpful links. I am a Linux user and my links may be geared toward Linux, some things can be done in Windows, but some require Linux.
Lineage OS for the Mini: https://forum.xda-developers.com/android/development/lineageos-13-life-one-x2-mini-t3692814 (has links to his device and vendor tree)
How to compile an Android kernel: https://forum.xda-developers.com/le-2/how-to/guide-compiling-64-bit-android-kernel-t3512749 (I'm still trying to locate the Mini kernel source)
Tool to unpack and repack a rom: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
tool for unpacking apks: https://ibotpeaches.github.io/Apktool/
I hope these help you and enjoy
Click to expand...
Click to collapse
This is awesome thanks so much!! I use Windows on a daily basis but I do have a pretty good knowledge about Linux and have set up a build environment in for Android. These links should help me understand what I am missing. I am also happy to continue testing and give you feedback on this ROM as it is currently my daily driver.

New Rom out. It has the stock theme, other than that it is the same.. I haven't decided if I'm going to build two Roms or have the theme be a patch. Maintaining all the different variants of the Rom are getting to be very time and space consuming.
https://www.androidfilehost.com/?fid=889964283620778170

Strange question, but on the original stock rom, I started having issues with the Package Access Helper not working, while installing updates for Paypal, and just straight up trying to install Spotify, even the APK. I did a full factory reset, still did not work. I also installed the custom rom over at BLOX2.com, and the Package Access Helper still would stop working, even after clearing data/cache. I'm just curious if you know if your rom will fix that issue?

Requia77 said:
Strange question, but on the original stock rom, I started having issues with the Package Access Helper not working, while installing updates for Paypal, and just straight up trying to install Spotify, even the APK. I did a full factory reset, still did not work. I also installed the custom rom over at BLOX2.com, and the Package Access Helper still would stop working, even after clearing data/cache. I'm just curious if you know if your rom will fix that issue?
Click to expand...
Click to collapse
Is this without root? I don't know if my rom will fix that, I never used the Paypal app. Your welcome to try and let me know. Also there is LineageOS 13 for the mini which has been built from source.
https://forum.xda-developers.com/android/development/lineageos-13-life-one-x2-mini-t3692814

New rom rebuilt from the 01/04/2018 update.
v 1.1.0

There is a problem with the latest version of SRGX2. Mobile data doesn't work. I work on it this weekend and keep everyone updated.

Here is the fixed rom.
https://www.androidfilehost.com/?fid=818070582850494825

Good news I was able to get Android File Host to make the Life One X2 an official device. I have made a request for the Mini too. For now all the files will be under the Life One X2 device.
Updated rom: https://www.androidfilehost.com/?fid=673956719939824825
It includes the stock Calendar, Clock and Calculator apps. I changed the DPI to 441. Let me know if anyone has any problems with the Playstore. I know that there has been some requests for the stock Camera and file Manager apps. It's hard to please everybody so I added a patch section which may please some.

[LENNY5][UNOFFICIAL][GSI]LineageOS 16 Treble with FLOSS, MicroG, Root, FakeStore

I DONT TAKE ANY WARRANTY WHATSOEVER IN ANY DAMAGE THAT MAY RESULT IN FOLLOWING THIS GUIDE OR USING THE SOFTWARE, ROM IN QUESTION, IN ANY WAY, MAY IT BE AS INTENDED OR NOT. IF YOU HAVE ANY FEELING YOU COULD END UP SUING ME FOR RISKS *YOU ALONE* ACCEPTED TO TAKE, YOU SHOULD IMMEDIATELY STEP BACK AND LEAVE THIS POST, ALL THE OTHERS: BE CAREFUL. YOU WILL LOSE ALL OF THE DATA ON YOUR PHONE'S USERDATA, CACHE AND SYSTEM PARTITION AND THE PHONE WILL BE FACTORY RESET!
STOCK FIRMWARE INSTALLER: https://support.wikomobile.com/maj/Lenny5_OPE_V34.zip <-- if you brick your device.
Hey folks
This is just a brief explanation on how i built this ROM, a complete guide to building the rom may be published at a later point in time. For the Downloads, go to the Links section. The flashing guide will be focused on Lenny 5, but the image may work on other treble-enabled devices, too, so feel free to try and report if your device works with this build.
Build variant: arm-aonly-floss-su-userdebug
If there's interest in other build variants (specifically with microg and floss - fdroid, moz-nlp, openweatherprovider - implemented), ask me, i will do my best.
Build description:
I have an old Wiko Lenny 5 around here and wanted to use it as a Kodi Remote etc. at home, but didn't want to use their stock ROM. Also i wanted some freedom in using my device, specifically a rooted device and microg implementation. After trying to build TWRP with no success and the Wiko Build information being massively outdated i then focused on Generic System Images, as Lenny 5 is Treble-enabled. Big thanks to @phhusson for the whole lot of effort he put into building AOSP GSI's (and also clues towards building LineageOS GSI's). After having AOSP9 installed on it for some time, i got bored and tried to compile LineageOS using the patch-and-build system provided on phhusson's github. That worked just great on AOSP9, but failed to build a bootable LOS16 in the first place. So after some recherche, i stumbled across @AndyYan's thread, containing some LineageOS GSI's prebuilt and ready to use. These worked great on my phone, but as stated above, i wanted to customize my LineageOS even further, so i manually patched my build-tree with AndyYan's Lineage-Treble-Patches by doing what this build script does, tested and it booted (i guess it's mainly related to the SELinux Policies not being correctly built for LOS with only phh's treble-patches). So far so good.
Additionally, i implemented the MicroG services by cloning these prebuilts on github to the respective folder in the build tree and before the build executed
Code:
export WITH_SU=true
to include LineageOS's root system in the build. I adapted the treble_arm_afS.mk device config to not use phh's su and the device/lineage/floss.mk file to include
FDroid
FDroidPrivilegedExtension (which is being built from treble sources)
MicroG services (use Play Store Apps)
FakeStore (use Play Store Apps)
MozillaNlpBackend (MicroG Network Location backend)
NominatimNlpBackend (MicroG Network Location backend)
OpenWeatherMapWeatherProvider (for LineageOS Weather Provider)
You are then free to use no Playstore at all or i.e. Yalp Store to download Play Store Apps.
After downloading the Image you may need to Unpack it via 7-zip or another tool.
Flash the device:
To install this custom ROM on the Wiko Lenny 5, in your stock ROM go to Settings->Developer Options->OEM unlock->Enable. Also, in the Developer Options, make sure, ADB Debugging is active and, on prompt, accept debugging connections from your computer.
On your computer, enter Command Prompt and issue the following commands:
Code:
adb reboot bootloader
*wait for device reboot*
fastboot oem unlock [COLOR="Red"]<-- this will factory reset the device!!![/COLOR]
*press vol up on the phone to allow unlocking the bootloader, and wait for the phone to return to fastboot mode*
fastboot erase userdata
fastboot format cache
fastboot format system
fastboot flash system <path-to-the-downloaded-gsi>
*wait for each process to finish*
fastboot reboot
now, wait for the phone to reboot, it should, after some time, show you the usual LineageOS startup screen. Take your time to set up your phone. To make MicroG and FakeStore work properly, you will have to Go to Settings->Apps&Notifications->App-Permissions->Spoof package signature->Menu->Show System Apps and allow FakeStore to spoof Signature. Go to Settings->System->Advanced->MicroG Settings and add your Google account. Activate Device Registration. Then activate Google Cloud Messaging and Google SafetyNet, if you want to take advantage of those services. Inside the UnifiedNlp Settings choose MozillaNlp in the first, and NominatimNlp in the second setting.
Go back and choose "Self check", if required, if required, grant MicroG GmsCore the permission to spoof signature, this should make most of the boxes go "checked". If Phonesky shows errors about signature spoofing, this should normally be gone after a reboot of the phone (given you allowed FakeStore sig spoofing). Disable battery optimization and then reboot the phone.
Check back in MicroG Settings->Self check, if all the boxes have been checked. If not, most mandatory points are self-explanatory.
This Lineage ROM will not allow you to update to a newer version. I cannot guarantee continuous updates, but encourage you to try building LineageOS treble with the way explained above, yourselves. If enough interest is around, i will consider doing updated builds from time to time.
Update:
Today i compiled a recent source tree containing the 5th of October patches. I will try to keep up with updating the Image whenever security fixes are released. The download links below have been updated to the newest version. To update your phone without deleting the data on it (make sure you have adb debugging enabled), you can simply do
Code:
adb reboot bootloader
fastboot flash system <system-image.img>
fastboot reboot
and then give your phone some time to "update". it should boot normally without erasing your data.
Links:
ROM .7z [~430MB]
ROM .img (~1.1GB)
(version was compiled at 19th of October '19, containing the October 5th security fixes.)
Let me know if this works for you, too!
Cheers
ivelischt

*reserved for additions/build guide*

Nice work
Nice work, I'll test the ROM later or tomorrow, also I like to see some development for this phone, also, It would be very nice to develop a custom recovery for it for better flashing experience and being able to flash gapps.
I have kinda workplace on my PC, I'm still wondering to build my first ROM but I think it will take lot of time.

Hanthonious said:
Nice work, I'll test the ROM later or tomorrow, also I like to see some development for this phone, also, It would be very nice to develop a custom recovery for it for better flashing experience and being able to flash gapps.
I have kinda workplace on my PC, I'm still wondering to build my first ROM but I think it will take lot of time.
Click to expand...
Click to collapse
Thanks. The custom recovery thing is a bit more difficult for treble devices, but i'd be happy to learn more from more experienced people.
I was not able to get TWRP running despite "successful" Custom recovery builds.
The build is quite straightforwards if you have some experience on compiling with linux. But you need around 200400Gigs of free space per build tree (lineage, aosp, ...). The most difficult thing for me was to alter the sources for inclusion of the packages i mentioned above, including microG. to build with opengapps, i expect, you'd use the same approach to include them in the build tree as with microG, just using the other packages and probably slightly customized CUSTOM_PACKAGES config. there is a k300 recovery out in the wild net. so there should be at least *some* possible way to port twrp for the k400, too.
about the time to build the rom: it took me about a day to sync sources and, using 2 cpus at 4gig's of java virtual memory, about 6 hours to compile the first round. after that, only compiling the changes made, it took me about another half an hour to recompile the changes. the editing process is marginal, if you know how to append to/remove from/patch the source files, the lineage4microg and treble rom-builder bash-scripts on github give you a pretty good insight in how to apply patches. also, from the dockerfiles you can get a list of all the dependencies your system needs to build the tree. i used these sorts of "tricks" to ensure my build runs well.
so far from me. i will try to find some free time in the future to put up some guide on how i built the rom as-is.
feel free to report if the rom works on your device!
best regards
edit: 400Gigs is better

ivelischt said:
Thanks. The custom recovery thing is a bit more difficult for treble devices, but i'd be happy to learn more from more experienced people.
I was not able to get TWRP running despite "successful" Custom recovery builds.
The build is quite straightforwards if you have some experience on compiling with linux. But you need around 200400Gigs of free space per build tree (lineage, aosp, ...). The most difficult thing for me was to alter the sources for inclusion of the packages i mentioned above, including microG. to build with opengapps, i expect, you'd use the same approach to include them in the build tree as with microG, just using the other packages and probably slightly customized CUSTOM_PACKAGES config. there is a k300 recovery out in the wild net. so there should be at least *some* possible way to port twrp for the k400, too.
about the time to build the rom: it took me about a day to sync sources and, using 2 cpus at 4gig's of java virtual memory, about 6 hours to compile the first round. after that, only compiling the changes made, it took me about another half an hour to recompile the changes. the editing process is marginal, if you know how to append to/remove from/patch the source files, the lineage4microg and treble rom-builder bash-scripts on github give you a pretty good insight in how to apply patches. also, from the dockerfiles you can get a list of all the dependencies your system needs to build the tree. i used these sorts of "tricks" to ensure my build runs well.
so far from me. i will try to find some free time in the future to put up some guide on how i built the rom as-is.
feel free to report if the rom works on your device!
best regards
edit: 400Gigs is better
Click to expand...
Click to collapse
The ROM works great but I'd like to see one like this with gapps to install on my device (freaking system image size), I've never used MicroG before and I don't know well how to use it.
Also, if you have the knowledge (I'm pretty sure you know more than me) we can investigate a way to create a TWRP version for K_400

Hanthonious said:
The ROM works great but I'd like to see one like this with gapps to install on my device (freaking system image size), I've never used MicroG before and I don't know well how to use it.
Also, if you have the knowledge (I'm pretty sure you know more than me) we can investigate a way to create a TWRP version for K_400
Click to expand...
Click to collapse
Hi Hanthonious
ivelischt said:
If there's interest in other build variants (specifically with microg and floss - fdroid, moz-nlp, openweatherprovider - implemented), ask me, i will do my best.
Click to expand...
Click to collapse
as the microG variant requires some "special sauce", namely the ability to spoof signature as well as other small fixes in the source code, my source tree is a bit different from the "vanilla/gapps" source tree. thus, to build variants not containing microg, you can simply sync the lineage source tree and apply the additional phh treble sources&patches. *edit: next to phh's patches, you will also need AndyYan's patches; you can find information about it in the OP. given, i write a guide (which i still intend to, but this takes some time), the patching step will be explained more clearly* basically, it's one step less than compiling it with microg. at the moment i cannot afford enough disk space to create another work tree, which is why i "can't promise" other build variants, until this issue is gone. which may be tomorrow or in a year. maybe you can find a gapps-version of treble-lineage 16 here in the xda boards. otherwise you will have to wait, or try to build it yourself. also, you might be interested in @AndyYan's lineage version, which is vanilla (no gapps or microg).
i would guess that the system image will not grow excessive just by including opengapps, but i may be wrong. i think that you'd possibly would have to choose a "non-complete" opengapps-package, to make it fit.
to quickly summarize what microg does is, that it spoofs its signature to make your phone think that you have the real Google Services Framework, Google Cloud Messaging, etc. services installed. this makes apps, which depend on these services, work even though you don't really "have" them. additionally, microg establishes an "essential" communication between itself and the real google services to allow you to use google services despite having all their bloatware.
to round this up, you have fakestore which spoofs existence of Google Play Store for those apps and games, which specifically check for GPS's existence (Phonesky app).
i think this should quite generally point out, what microg is for (an api which connects you to google, whilst only handing out information, which is crucial to keep a specific connection alive)
you can then use i.e. Aurora Store to download and update your preferred playstore apps. i tell you this specifically, as i hope that, using it right, microg might be able to give you a "fully stocked" phone experience, whilst keeping most of your data secure and your phone unbloated by google's app-hoard.
if you follow the instructions in the OP on how to fully enable microG, this might be a very handy solution for you, too, so maybe, you want to give it a chance.
to point out my issues with twrp (as far as i can tell using my little experience): twrp is device specific. which means, you need a vendor tree and you need to include it whilst building, so twrp can compile against it. now, treble is a way of excluding your device specific vendor tree from the build altogether (your system image basically doesnt contain the vendor files in a "folder" (/vendor), but in a seperate partition. this partition is "simply" beeing symlinked to from your system partition. this way you will never need to build vendor-specific sources but android builds against standardised "api's" which are being "serviced" by treble-enabled phone's vendor-files (lying at the vendor-partition). this makes building aosp and/or lineage, etc. easier as you can build one variant per architecture, which fits all treble enabled phones of that architecture (arm/64/binder32/64,a/ab,...). this is, very basically said, what is called a HAL (hardware abstraction layer) on a desktop computer.
but at the same time it's much more difficult to find vendor sources for those phones, as there is no more need at all for manufacturers to make these sources publich (as far as i understand it). as a matter of fact, you may not need these vendor sources for modern aosp (8.1+), which really is a grace!! but twrp doesn't seem to work when compiled against treble trees.
i even managed to compile a kernel which is mentioned at the wikogeek site for the lenny 5. i tried to include that kernel when compiling the recovery image but even that did not work out. as i am no experienced programmer (especially not in the high languages), i will not be the person to ask when it comes to finding out what bugs and how to circumvent it.
there is a little light at the end of the tunnel, though. as far as i understand it, treble-phones come with mostly generic kernels, which *could* make it easier to find a way to build a kernel/boot/recovery image in a similar fashion we build the gsi (generic system image) with. additionally, if there is some effort on it, i imagine, that it would be possible to generally modify twrp in a way so it's able to build against treble source trees with missing vendor source. this would enable twrp to run on virtually any phone which is treble enabled and there would be few to no need to port it for each device, specifically. maybe there would then be versions as in the treble gsi's (arm/64,a/b,...) as well as build variants for alternative display sizes etc.
but i wouldn't even know where to start...
i hope i was able to answer your questions. if you decide to stick with the variant in the OP, you should consider downloading and installing the most recent updated build.
best regards

Problems I found in the rom and if there is a way to solve them
Yo,
I wanted to point out the problems I found in the rom and if there is a way to solve
These are the problems I encountered:
1: *THE MOST IMPORTANT*
I can't pass the safetynet test, I researched a lot and I still couldn't solve
When I try to pass the safetynet test on magisk it gives "safetynet API Error"
When I try to do the test with the "SafetyNet Helper Sample" app it gives "SafetyNet request: success
Response validation: fail
Error Msg:
ApException [17]: API: SafetyNet .API is not
available on this device. Connection failed with:
ConnectionResult {statusCode = SERVICE_INVALID,
resolution = null, message = null}
And the "SafetyNet Test" app gives me "fail (Google Play services not available)"
I am aware of the new problem with the safetynet:
(sometimes people are still able to pass the test probably because it is still in maintenance or something)
https :// www . androidpolice . com /2020/03/11/safetynet-improvements-kill-magisk-hide
https :// twitter . com /topjohnwu/status/1237656703929180160
https :// twitter . com /topjohnwu/status/1238514375150850048
https :// twitter . com /topjohnwu/status/1237830555523149824
But even so I should be able to run the test even if it give both negative should run instead of showing those errors
2: The contacts I had on the SIM card and Google account do not appear in the contacts.
So I went on WhatsApp to save the ones I wanted to save, but after a few days and a few restarts the contacts are still saved, but on WhatsApp it shows that they are not saved even appearing in the contacts, to appear again saved on WhatsApp, I have to save them all again
3: Cant login in Clash Royale with google play games account, can i flash the rom and gapps to work or the microg and google play services will create some conflict, is there a way to unninstall microg completly and reflash the rom without microg and flash gapps?
4: Error when login in pokemon go: unable to authenticate, I researched it and it seems to be because the safetynet is negative but I can't even run the test (only after I became aware of the new safetynet problem) even with this new problem I would like to try to run the test to see if it passed since some people still are successfully passing the test
5: in the microg settings in self-check an option is not checked in the box "UnifiedNlp do not have location to test geocoder" I already researched to see if it solved something but I couldn't
edit: I solved it using the "Apple WI-FI" backend instead of the "Déjà Vu Location Service"
BUT NOW ITS GIVE ME AN UNCHECKED BOX
"Network-based location enabled:
you either disabled network-based location
(in system settings) or the system is not
supported"
6: some times in the time widget just appear "loading widget..."
and these are all the problems that I encountered, pls help me
solving these problems, thx!:good:
sorry for some mistakes i translated from portuguese to english with google translator and my knowledge of english

CooperTUGA, thanks for writing. And I want to apologize for letting you wait for so long. In fact, at the moment i do not actively develop this ROM (due to data loss on my virtual machine).
Anyways, i will try to address your issues as good as i can, though i must admit, none of these issues happened on my device.
ad 1: The only thing that comes to my mind is, that something went wrong when registering your device with the Android-ID. (see OP activation instructions). The SafetyNet-API itself should be working, atleast I had no similar issues (after Registering the device it takes some time - around 5 minutes - for Android to reflect the registered state).
But if someone happened to have this issue and knows another solution, you are welcome to tell!
ad 2: Does it help when you try to import the Files from the SIM card? As for Google contacts, it is - from my POV - stringent, that, if the SafetyNet API doesn't work properly, you will be unable to access Google Services (as Google Contacts) which would explain the missing Google Contacts.
ad 3: GApps and microG are two different things. GApps install a version (open-source fork, contains proprietary binaries) of the Official Google Apps, that is, they provide full functionality towards google services, provided you registered your device correctly.
microG is a pure Open Source fork of that, providing but the Framework with which Google Apps can be run. It does not provide Google Apps (like PlayStore etc.) by itself but merely allows them to run, given the configuration is right. This microG-ROM is not built to work with GoogleApps like PlayStore, but instead relies on the microG Services to get Apps, providing same or similar services, running (like Aurora Store etc.). To address your question, it is possible, to change the source code which was used to build this ROM, so it builds with Gapps or completely free of any such services, in fact it would mean to exclude certain patches, but such projects (Treble-enabled) are covered by others and because of above stated reasons i will not be able to provide such in near future.
Short but clear: No, there is no way to "uninstall" microG as it is built together with the ROM and the source used was especially prepared to use microG. But if configured right, you should be able to use your Google-Account in combination with Google-Services-Apps or Games despite using microG.
ad 4: See above. If everything's configured right, you should be able to play Pokemon GO, although i don't use any of these Apps (Clash Royale, Pokemon GO, WhatsApp). I never encountered any Problems along using Google Apps with this ROM.
ad 5: Well, the error says it all. I have Mozilla Location Service installed, which works like a charm. Maybe try this one? You can get it from FDroid, search for "MozillaNlpBackend" and see if it helps to sort this out? This works for me, after all.
ad6: as this is very unspecific, i cannot really tell what's the problem, but i would guess it has to do with the SafetyNet API not doing what it should or even the Location Backend not reporting position in time...
Did you clean your cache and data partitions while installing this ROM? I really am not sure what could create the behaviour you describe. Maybe there was a change in the SafetyNet/Device Certification process since this ROM-Build, maybe theres someone in those boards who could answer this, but i unfortunately can't...
I'm sorry that i cant give you more positive news, but hopefully it helps you in orienting what some common problems could be caused by.
Let me know about your success in trying to get the ROM working.
Best regards and greetings to portugal!
ivelischt

additionally: if you are interested in porting the Lineage Source for GSI/Lenny 5, you might be interested in this Thread: https://forum.xda-developers.com/android/help/how-to-root-wiko-lenny-5-t3819469
specifically, i wrote a guide there on how to build Android/Lineage Source for Treble devices. Maybe this helps you in getting your own build environment, enabling you to build to your disguise.

Images are not available anymore. Anyone here?

[ROM][UNOFFICIAL][SUNFISH][A11] LineageOS 18.1

I'm not a fan of Android 12's Material You, i.e. dull color schemes, ginormous headers and copious amounts of whitespace. Screens got bigger over time, but information density is getting lower and lower. It's crazy. Anyway, I'll spare you the rant.
As the LineageOS project stopped publishing builds for LineageOS 18.1, but they continue to patch their 18.1-branch with Android's monthly security updates, I decided to start building it myself following the instructions here.
You can download the builds here:
LineageOS 18.1 for Pixel 4a (sunfish) - Browse Files at SourceForge.net
Unofficial builds for those who wish to stay on 18.1 a bit longer.
sourceforge.net
I usually publish an update every month.
Additional tweaks​
Default maximum lockscreen password length of 64 characters (instead of 16) [more info]
Firmware​It's probably best to run the latest Android 11 firmware, since this is Android 11. You can download the last official Android 11 factory image from Google and flash it from fastboot mode (your data will be erased).
Clean install​
Download the latest lineage-18.1-xxxxxxxx-UNOFFICIAL-sunfish-boot.img and lineage-18.1-xxxxxxxx-UNOFFICIAL-sunfish.zip from aforementioned link
Boot to bootloader a.k.a. fastboot
Flash the boot image with this command (replace filename with actual filename):
fastboot flash boot lineage-18.1-xxxxxxxx-UNOFFICIAL-sunfish-boot.img
Boot to recovery
Factory reset > Format data/factory reset > confirm (your data will be erased)
Apply update > Apply from ADB
Sideload the ROM with this command (replace filename with actual filename):
adb sideload lineage-18.1-xxxxxxxx-UNOFFICIAL-sunfish.zip
(If it asks "Signature verification failed. Install anyway?" answer Yes)
Optionally flash Gapps or anything else:
Advanced > Reboot to recovery
Run adb sideload with your zip
Reboot system now
Updating​Updates are delivered through the built-in updater (Settings > System > Updater).
If you use Magisk, deny the Updater's request to reboot at the end of the update process, open Magisk, tap Install and then "Install to Inactive Slot (After OTA)". Tap reboot after the process completes.
Migrating from last official LineageOS 18.1 build​So it turns out builds are signed with a secret cryptographic key and when you install an update it has to have the same cryptographic signature or bad things will happen. This means you can't directly update from the last official build (signed by the LineageOS team) to my build (signed by me).
The solution: build and install (as an update a.k.a. dirty flash) a so called "migration build", which "resets the keys on all packages at every boot." I guess after booting into this build once, you can just update to the regular build using the updater (the LineageOS wiki is very concise on this topic and doesn't explain much).
You can download the migration build and boot image from the aforementioned link, they are marked MIGRATION instead of UNOFFICIAL. Don't run this build any longer than necessary, it's a security risk by its very nature.
When I tried this migration, my system wouldn't boot (stuck on boot logo). ADB worked and I could see in dmesg or logcat that, among other errors, SystemUI failed to start. Was it because I didn't reflash Gapps? But I never reflashed Gapps when using LineageOS' builtin updater...
Later I did some testing. I did a clean install of the latest official build, then my migration build, then my normal build, all was fine. Then I did a clean install of the latest official build WITH Gapps, then flashed the migration build WITHOUT Gapps, and the system booted up just fine. Huh? Then I flashed my normal build DIRECTLY over the latest official build, without migration build in between, and all was STILL FINE! So uhm... what's happening, how does this signing work and when does it become a problem? I have no clue.
If you decide to try the migration route, make sure to backup any data you don't want to lose and let us know how it went!
Acknowledgements​Thanks to the original maintainers PeterCxy, cdesai and mikeioannina for bringing LineageOS 18.1 to the Pixel 4a!
Source code​
LineageOS
A free and open-source operating system for various devices, based on the Android mobile platform. This is a mirror of https://review.lineageos.org/ - LineageOS
github.com

Gcam​You can just install it from the Play Store. There are a few bugs:
In photo mode, slide up to record video doesn't work
Motion Photos doesn't work
It doesn't scan QR codes without Google Lens
App versions without Material You​If, like me, you try to avoid Material You like the plague, here's a list of the last versions of Google apps that I use(d) that don't have Material You. Note that LineageOS includes its own versions of some of them and all of them are optional anyway. You can find them on e.g. APKMirror.
Calculator 7.8
Calendar 2021.35.3
Camera 8.2.400
Clock 6.4.1
Contacts 3.49.2
Gboard 10.8.05
Maps 10.80.1
Phone 68.0.3
Photos 5.58.0
Translate 6.24.0.02
Is it wise to run older software? You decide. In an ideal world security updates and bug fixes would be separate from UI and "we decided you don't need this functionality so we removed it" updates. I've long ago stopped regularly updating my apps (i.e. turned off automatic updates) because I like to be able to trust my device will look & work the same tomorrow as it did today.

P.S. After you've installed the regular 20220815 build, the updater will keep showing an August 16 update which is actually the build you're already running. This is because I had to move the timestamp one day forward in order to enable updating from the MIGRATION build, which was also build on 20220815 and wouldn't see the regular 20220815 build as an update otherwise. This will be remedied with the next update I publish.

The September update is now live.

Does banking app works?

My bank's app has always worked fine on LineageOS. Your bank's hasn't?

icantlogin said:
My bank's app has always worked fine on LineageOS. Your bank's hasn't?
Click to expand...
Click to collapse
I had never tried this rom want to try if bank apps works out of box

icantlogin said:
The September update is now live.
Click to expand...
Click to collapse
Been using this for several days now without a hiccup , fast ,,smooth, and google proofed, Thanks!!

Thanks for keeping LOS 18.1 alive with these security updates. I recently upgraded to 19.1 to try it out for a few months but I just couldn't get used to or appreciate the new UI. With every app update they also make it more like A12 and it just wasn't working for me.
Just installed your September update and all is well so far.

The October update is live!
A little background: I'm building this ROM on a Google Cloud Compute Engine instance, which is a virtual computer (also called virtual machine or VM) running in a Google data center. To keep the VM around is very costly, as it uses 300 GB of SSD storage which doesn't come cheap. So I create a new VM every month and dismantle it afterwards. This means I have to set up the build environment from scratch every time, which consists of a lot of steps. So from the beginning, I've put most of those steps in a Bash shell script (the VM runs Ubuntu 20.04) to speed things up drastically.
Last week I added some code that generates the updater.json file (that's read by your phone when it checks for updates) which I had been creating by hand before. I also added code to automatically upload the build to SourceForge. So yesterday all I had to do was create the VM, upload the script and run it. Six hours later, your phone was able to download the update without any further intervention on my part.
What can I say, the geek in me is very happy

Hi, I thank you for your work. Would you know if I can install microg without magisk, maybe via nanodroid or similar while maintaining OTA updates?

I have no experience with that. I assume you would have to apply the signature spoofing patch and install microG before booting from the updated system partition. So after installing the OTA update boot into recovery and do this?

Hello ! How to you push the google apps on this one ?
I'd like to get a pico gapp installed to get some game running

It's in the instructions in the first post, after flashing the ROM:
Optionally flash Gapps or anything else:
Advanced > Reboot to recovery
Run adb sideload with your zip
I'm using NikGapps Core myself.
This only works if you do it before first boot by the way, as far as I know you can't put Gapps on an installation you're already using.

Hi! Do you know if this will retain microg if I dirty-flash it on top of a lineage.microg.org build (the last official release) using your MIGRATION build? If you're not sure I'll back up my stuff and give it a shot and report back Thanks a lot for your your work!

Well... I don't think that would work, since this ROM doesn't include microg and the needed signature spoofing, so my guess would be you'll just loose that—if the migration works at all. Let me know what your findings are though!

icantlogin said:
Well... I don't think that would work, since this ROM doesn't include microg and the needed signature spoofing, so my guess would be you'll just loose that—if the migration works at all. Let me know what your findings are though!
Click to expand...
Click to collapse
Here is what I found, in case it helps someone: flashing the migrate ROM and then the latest proper ROM works perfectly, however I did lose microg, system f-droid, etc, and anything which is in the lineage.microg.org build but not in this one.
Now since you are building monthly ROMs, would you consider applying the signature spoofing patch to your builds? This would make it easy for those who want to run microg instead of google play framework/gapps. As far as I understand it you just need to apply this patch with `cd android_frameworks_base; patch -p1 -i /path/to/android_frameworks_base-R.patch`. Thanks again for your efforts

I'm open to consider this, but as I somewhat but not fully grasp the security implications of enabling signature spoofing, and not everyone might want to have this enabled by default, it would have to be a toggle in Developer Options and disabled by default, or I would produce a separate build with the patch applied.
If you could find a patch for me that implements the toggle in Developer Options, that would be great. As I researched it a bit I read that some ROMs have this.
Interesting that the migration worked, by the way!

Some more thoughts on this: it seems with signature spoofing enabled on the ROM, an app still has to ask for the permission to spoof its signature, so for advanced users like us who know what we're doing, I guess that's good enough. I'll have to read up on this a bit more though. I know the LineageOS devs are against implementing it but most everyone else says it's actually not that big of a security risk.

I just reply to show you my gratitude for maintain LoS 18. I updated to 19 two weeks ago and I was literally suffering with the system theme. IDK what they were thinking but it was terrible. Also for me, on 4a, was having lag: An example is when I shuffle songs on Musicolet, they take a good while to update the information (song name, basically) while with 18 it updates as soon as I press next.
BTW, can you recommend me a good KERNEL? Thanks!