Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Anyone? Still locked out of my phone. :crying:
Reboot normaly > go to settings > developer setting > oem unlock check yes
#gggirlgeek
Reboot normaly > go to settings > developer setting > oem unlock > check yes
I can't get into the phone at all. It is FRP (Google) locked because I did a factory reset from recovery. I can only manipulate it from PC or stock recovery. I have ADB, Odin and Samsung Kies on my PC if that helps.
What is the reason I am getting the ODIN error: "Complete(Write) operation failed"? Is it due to the FRP lock?
If not, would flashing the same stock firmware even help? (I have read that it's not possible to flash older firmware versions.)
Is the boot partition where the FRP status is stored? Is it possible to flash a new boot image to reset it?
I assume flashing a custom recovery would be useless? I doubt it could be done without USB debugging/ADB being enabled anyway.
One of the reason for that odin error is flashing an old build of stock ROM, your guess is right
Even if you are able to flash a stock FW via ODIN you'll still not be able to boot to your OS.
You have to login using the same google id that was previously logged in
OR you have to bypass the Google Account Login Screen.
There are varous method on youtube (i know you saw them) to bypass that screen (Side Sync method worked for me at the 10th attempt) inorder to install a 3rd party app either to
1. enable the developer option or enable OEM unlock ( to flash custom ROM or custom recovery)
OR
2. to overwrite the previous google account saved with your new account details. (THIS ONE HELPED ME)
WITH FRP LOCK ON, ODIN SHOULD NOT GIVE YOU ERROR ONLY IF YOU ARE FLASHING STOCK ROM. BUT STILL YOU WILL BE LOCKED WITH GOOGLE ACCOUNT LOGIN SCREEN BECAUSE OF FRP LOCK ON AND STOCK ROM
FRP info. is saved in Sboot. Flashing a new sboot works only for devices those were never upgraded to Android 6. For J7 2015 that was upgraded to android 6, flashing Sboot bricks the phone as said by a cell phone repair agent
Regards,
Sid
@saddam.khan999 : Thank you so much for replying. This is helpful. :highfive:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Tried different USB ports, and even different PC's to get it to pop up on the phone. Tried old usb drivers too. Sidesync never senses it, and My Computer only show MTP folder that won't accept any file pasted to it.
You did this with Android 6.0.1 October 2016 update? They fix more holes every time.
Also, can you give me the link to the unlock tutorial you used with Sidesync? Just want to compare my method.
Hi,
gggirlgeek said:
This is helpful. :highfive:
Click to expand...
Click to collapse
How grateful I am to read the above line! Thanks :good:
gggirlgeek said:
You did this with Android 6.0.1 October 2016 update?
Click to expand...
Click to collapse
Yes on Android 6.0.1 but i dont remember the build date.
gggirlgeek said:
Also, can you give me the link to the unlock tutorial you used with Sidesync?
Click to expand...
Click to collapse
I tired two different tutorials of SideSync to crack it. Once I reach home in the next 10 hours from now. I'll search on youtube and give u the links. Right now I cannot remember it.
gggirlgeek said:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Click to expand...
Click to collapse
I followed below step to fix popup issue
1. Uninstall all samsung apps like, Kies, SmartSwitch, SideSync everything.
2. Uninstall Samsung USB drivers
3. Install SmartSwicth (to get best drivers)
4. Now install SideSync (latest)
5. Open SideSync and check for OTA updates in your PC (update it if available)
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
gggirlgeek said:
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
Click to expand...
Click to collapse
@gsmDabbler this guy says he/she can solve FRP issue for 5$ on skype. I dont know if he's fake or real. Best of luck
1. At welcome screen push next.
2. Connect to wifi and push next.
3. Accept terms and conditions and push next
4. Attempt to sign in to your google account.
5. On loopback to sign in page, push back intel you see the welcome screen again.
6. Push emergency dialer.
7. Dial 112
8. Put in on speaker and when the disbatcher askes what is your emergency, quickly swipe where the speaker option is to your left and click on email.
9. Ask the disbatcher for the number for non-emergency. (EXTREAMLY IMPORTANT TO NOT SKIP THIS STEP)
10. Sign into your email.
11. Compose a new message.
12. On another device download drive.google.com/file/d/0B3quVdCaxqLfaG9VY2xjd3hhWmM/view?usp=drivesdk[/url]
13. Move this file to a microsd card, and put it into the j7.
14. Push attach
15. Locate your sdcard and select es file explorer.
16. Once attached to the email, click on the box inside the email that says es file explorer. If redirected to security setting check the box that says "Unknown Sources".
17. If then redirected to install screen for es file explorer, install app and skip the next step.
18. Push back intel your on the screen with your new composed email with attachment, and once again click on es file explorer, and then install...
19. After install, restart your phone.
20. On welcome screen, plug your j7 into a power source.
21. Toggle your power button off, and then back on.
22. Click on the far right last bubble.
23. On home screen of es file explorer, take the sdcard out of the j7 and put back into the extra device you downloaded es file explorer to, and download these 2 files.
drive.google.com/file/d/0B3quVdCaxqLfNVFvMHlOWnNnY2M/view?usp=drivesdk[/url]
&
drive.google.com/file/d/0B3quVdCaxqLfc0gyRTBTNGNXOTA/view?usp=drivesdk[/url]
24. Copy these files to your microsd card from earlier, and put back into your j7.
------------> continued to next post of mine!
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip"]J700TUVU2APJ3_J700TTMB2APJ3_TMB[/URL].tar.md5
Where I got firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip[/URL]
Click to expand...
Click to collapse
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
?guys...no.. just Go to settings tap build 7 times go to developer options, turn on oem unlock, turn on usb debugging.ta dah.
mohitmallick17 said:
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
Click to expand...
Click to collapse
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
victhesunshine said:
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
Click to expand...
Click to collapse
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Saw a same issue please check & follow this steps if it helps you some way.
Download the latest samfirm tool available on xda.
Open the samfirm tool. Enter model and region. Tick Auto and binary nature.
Click on Check update. It will show the latest firmware available on samsung server.
Then click on download. It will download four file full firmware. Then flash it through odin.
You need a strong internet connection to download the file.
fullofhell said:
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
Click to expand...
Click to collapse
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
hightech316 said:
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
Click to expand...
Click to collapse
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
fullofhell said:
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
Click to expand...
Click to collapse
Thanks.
Drivers are installed.
Just cannot move from the google sign in.
There is a guide that shows how to use a USB drive with a shortcut apk on it , hooked up via OTG and is able to open settings. Although that did not work for me as well...
Maybe N version is different than MM ?
Almost the same problem here.....but in my j700f, I can't boot to recovery at all...can't flash stock firmware also due frp locked
Hey guys, I'm new here...
Well yesterday my dad bought me a Samsung Galaxy Grand Prime+ SM-G532F (vodafone, South Africa).
I wanted to root it( i always used to use KingoRoot) but i found a thread with an exploit to root the SM-G532F/M/G or something like that. Anyways i used it and flashed the "root-boot.tar" and followed all the steps( Enabled OEM unlocking and usb debugging) and i had root access and everything was perfect.
Then i thought i didn't need the OEM unlocking and the usb debugging anymore so i disabled both. Then afterwards i rebooted my phone( Because i had just installed Magisk so i could play pokemon go on a jailbroken device and it required a reboot.).
As it restarted, I got this message on a light blue screen( i don't think it even booted), "Security Error: This phone has been flashed with unauthorised software & is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost."
I think this is because of disabling the OEM unlocking. I tried flashing a stock ROM(it was really small though, but am downloading a 1.5Gb one right now) using odin while in download mode( The phone doesn't have a recovery menu to wipe/factory reset. It goes straight to download mode) and it appears that the custom binary (boot.img) is being blocked by the FRP lock.
Here is what appears when i go into recovery(well download mode):
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G532F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: ON
WARRANTY VOID: 0x1 (0x302)
MTK SECURE BOOT: ENABLE
AP SWREV: B1 K0 S0
SECURE DOWNLOAD: ENABLE
I can't use ADB because it doesn't even appear if i try "adb devices" it is completely blank. But in odin it shows 0:[COM4]. Is this because my usb debugging is disabled? Can i flash with odin if usb debugging is disabled? If not, is there a way to enable usb debugging with the phone only in download mode( As in no ADB recovery or updating from sd card etc).
Please help. I really need to fix this. Even if i lose everything on the phone it's fine since i only got it yesterday.
nullbyte001 said:
Hey guys, I'm new here...
Well yesterday my dad bought me a Samsung Galaxy Grand Prime+ SM-G532F (vodafone, South Africa).
I wanted to root it( i always used to use KingoRoot) but i found a thread with an exploit to root the SM-G532F/M/G or something like that. Anyways i used it and flashed the "root-boot.tar" and followed all the steps( Enabled OEM unlocking and usb debugging) and i had root access and everything was perfect.
Then i thought i didn't need the OEM unlocking and the usb debugging anymore so i disabled both. Then afterwards i rebooted my phone( Because i had just installed Magisk so i could play pokemon go on a jailbroken device and it required a reboot.).
As it restarted, I got this message on a light blue screen( i don't think it even booted), "Security Error: This phone has been flashed with unauthorised software & is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost."
I think this is because of disabling the OEM unlocking. I tried flashing a stock ROM(it was really small though, but am downloading a 1.5Gb one right now) using odin while in download mode( The phone doesn't have a recovery menu to wipe/factory reset. It goes straight to download mode) and it appears that the custom binary (boot.img) is being blocked by the FRP lock.
Here is what appears when i go into recovery(well download mode):
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G532F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: ON
WARRANTY VOID: 0x1 (0x302)
MTK SECURE BOOT: ENABLE
AP SWREV: B1 K0 S0
SECURE DOWNLOAD: ENABLE
I can't use ADB because it doesn't even appear if i try "adb devices" it is completely blank. But in odin it shows 0:[COM4]. Is this because my usb debugging is disabled? Can i flash with odin if usb debugging is disabled? If not, is there a way to enable usb debugging with the phone only in download mode( As in no ADB recovery or updating from sd card etc).
Please help. I really need to fix this. Even if i lose everything on the phone it's fine since i only got it yesterday.
Click to expand...
Click to collapse
Greetings and welcome to assist. FRP lock shouldn't prevent you flashing stock rom, the easiest way to restore your device should be with kies/smart switch and using the emergency firmware recovery option
Regards
Sawdoctor
sawdoctor said:
Greetings and welcome to assist. FRP lock shouldn't prevent you flashing stock rom, the easiest way to restore your device should be with kies/smart switch and using the emergency firmware recovery option
Regards
Sawdoctor
Click to expand...
Click to collapse
Ok thanks... Neither worked but i managed to flash the stock rom i got from sammobile.com using odin and it was able to boot and the security error was gone
nullbyte001 said:
Ok thanks... Neither worked but i managed to flash the stock rom i got from sammobile.com using odin and it was able to boot and the security error was gone
Click to expand...
Click to collapse
Thats great news, I'll close this one up then
Sawdoctor
Hi, I own a samsung galaxy s7, running Superman-ROM and using TWRP recovery. Recently I was mucking around with some friends and decided it would be a good idea to install a ****ty game as firmware (through Lucky Patcher). After asking me to reboot I did and it is now soft-bricked. It says "custom binary blocked by FRP lock". The problem is that both OEM unlock & USB debugging were off, so I cannot connect to my PC. The only thing I can access is Download mode, but I am not able to enter recovery mode to wipe it. I have tried reinstalling both TWRP & Samsung's default ROM through Samsung Odin (I do have USB drivers) and they both fail. Is this fixeable or would I have to give it to a professional?
Thanks in advance, Lucien
This once happened to me and I had to end up wiping everything on my phone with Odin.
Hello, I got an mdm locked device from a friend and I'm just trying to see if I can bypass the lock, I think download mode is disabled, there is no OEM unlock in developer options, and there is equally no wipe data/factory reset. So I tried to use the samFW frp tool to factory reset the device but the devices can't equally be recognized because I cannot dial *#0*#. Basically all secret codes are also locked. My question is, is there a tool or some way I can go about this or am I trying the impossible.
thelite said:
Hello, I got an mdm locked device from a friend and I'm just trying to see if I can bypass the lock, I think download mode is disabled, there is no OEM unlock in developer options, and there is equally no wipe data/factory reset. So I tried to use the samFW frp tool to factory reset the device but the devices can't equally be recognized because I cannot dial *#0*#. Basically all secret codes are also locked. My question is, is there a tool or some way I can go about this or am I trying the impossible.
Click to expand...
Click to collapse
Sounds like you need to remove the MDM lock, which is easier said than done. You'd have to contact the organization whose fleet this device belonged to.