Question Carlink bad call sound quality - FYT Android Head Units

Hello friends, the voice of the person I spoke to in carlink phone calls is very bad and scratchy. Is there any solution to fix it?

thericksizzler said:
Hello friends, the voice of the person I spoke to in carlink phone calls is very bad and scratchy. Is there any solution to fix it?
Click to expand...
Click to collapse
Is it an FYT unit, post Android system information including MCU version.
Also, steps taken to resolve with any suggestions from seller.

marchnz said:
Is it an FYT unit, post Android system information including MCU version.
Also, steps taken to resolve with any suggestions from seller.
Click to expand...
Click to collapse
Android Version : 10
Baseband version : FM_BASE_18B_W21.20.4|sc9863A_modem|05-20-2021 10:13:14
MARLIN3E_TRUNK_W21.27.3|uwe562_marlin3E_usbhub|07-07-2021 01:36:43
Build number : QP1A.090711.020 release-keys
System Info : APP2022-05-30 11:44:00
CPU Info : CPU:UIS8581A Octa-Core [email protected] GB(Memory) + 32GB(Storage)
MCU Version : 2022.06.24 14:34:07 NOR_53_L6315_G23P48F64_E60_V:1.0_FYTR
Bluetooth Version : BLINK_2161_RELEASE/2022:06:16:17:41:56_blink
CAN Protocol Version : VER.BG-RN11.1
I asked the seller for advice, but there has been no response for months.

marchnz said:
Is it an FYT unit, post Android system information including MCU version.
Also, steps taken to resolve with any suggestions from seller.
Click to expand...
Click to collapse
Noisy sound when call by CarLink?
Hello, I have CarLink version 2.23.0228.0844 installed on my OledPro head unit. If I use CarPlay via CarLink, when making or receive calls, the sound suddenly get very loud after 1-2 beeps. And the whole call was very noisy. I believe the...
forum.xda-developers.com
My problem is same as him. How can I know If my tesla unit have new firmware. Or they put some settings How can I make it work for my device?

Related

[Completed] EONON G2110F or G2110ZV Firmware Update Issues

I need to restore the operation of my Radio and WIFI for my EONON 2110F after a Firmware Update. Below are all the specifics that I thought would be helpful to anyone who could help.
I was told to update my firmware by the Manufacturer and now the Radio and the WIFI do not function. The Bluetooth and DVD function, but I can’t enable the Navigation without the WIFI, so the GPS is uncertain.
Any help would be appreciated
About Before Update of Firmware – possible minor errors
Model S07
S/N d201232c04050d0b07df0a5133504b52
MCU VERSION MTCB-KLD6-V2.81
OCT 22 2015 15:40:30
ANDROID VERSION 4.4.4_27112015
KERNEL VERSION 3.0.36+
[email protected]#1723
Fri Nov 27 17:51:20 CST2015
BUILD NUMBER rk3188-eng 4.4.427112015.18:17:38
CPU ARM [email protected](x4)
MEMORY 1024 MB
About After Update of Firmware – possible minor errors
Model S07
S/N d207232c04050d0b07df0a5133504b52
MCU VERSION MTCB-KLD2-V2.77
Aug 27 2015 9:07:47
ANDROID VERSION 4.4.4_29032016
KERNEL VERSION 3.0.36+
[email protected]#829
Fri Nov 27 17:51:20 CST2015
BUILD NUMBER rk3188-eng 4.4.429032016.17:20:05
CPU ARM [email protected](x4)
MEMORY 1024 MB
I purchased an EONON G2110F or G2110ZV Head Unit from EONON EBAY. There were a few issues I had with the Head Unit, some were my lack of understanding and 3 were the unit.
1-The Steering Wheel Control would not work reliably with my 2004 Honda Odyssey.
2-The Weather App was not finding the region I entered so it never updated.
3-I could not connect my music on my Apple iPod Touch to the Head Unit, the iPod is Model A1288 with IOS 4.2.1, although my iPhone 4 with IOS 7.2.1 music could be played.
These were minor issues compared what I am now dealing with the Head Unit.
Asking Support at EONON was very aggravating. They would not answer my questions correctly. Such as if I asked them about my problem connecting my iPod Music they would send me a video using an Android. If I asked them about the Weather App not working, they told me to perform an update without providing the files or instructions. If I asked them about wiring up the Remote Steering Wheel Control, they would send me a video showing someone with a phenolic perf board with buttons on it performing the remote control operations, with no wiring detail.
Any help would be appreciated
Hello and thank you for using XDA Assist,
you asked the same question in another thread:
EONON G2110F or G2110ZV Firmware Update Caused RADIO and WIFI to be non operational
Thread closed.
Kind regards
Trafalgar Square
XDA Assist

Question Long Press Steering Button function

Hey all, is there a way to assign long press and short press function to a same key on the steering wheel?
i have a Joying Android 10 headunit.
here is an example from Teyes video.
that would be interesting
No, it is not. It is a T'eyes feature.
<deleted the rest>
surfer63 said:
No, it is not. It is a T'eyes feature.
<deleted the rest>
Click to expand...
Click to collapse
I remember it was available on my old Eonon Android 8 so not a Teyes feature
It's written about on 4pda and involves direct MCU firmware change.
TheDarkKnight1 said:
I remember it was available on my old Eonon Android 8 so not a Teyes feature
Click to expand...
Click to collapse
Was it a FYT unit
Teyes feature, modification of MCU and installing the Teyes button app is discussed on 4pda.
Its been done?
Can you share the link pls?
TheDarkKnight1 said:
Its been done?
Can you share the link pls?
Click to expand...
Click to collapse
Yes
No - not permitted here. No I wont PM
"Unisoc head units based on UIS7862 / SC9863a (UIS8581A) Android 10 | Car radio and Android device"
I had this function on my old Xtrons PX5. On my Teyes CC3, this function works very badly, and disappears regularly!
JMM44700 said:
I had this function on my old Xtrons PX5. On my Teyes CC3, this function works very badly, and disappears regularly!
Click to expand...
Click to collapse
I dont really miss it....
JMM44700 said:
I had this function on my old Xtrons PX5. On my Teyes CC3, this function works very badly, and disappears regularly!
Click to expand...
Click to collapse
Yea it must be stable on Xtrons but Teyes is crap maybe that's why.
TheDarkKnight1 said:
Yea it must be stable on Xtrons but Teyes is crap maybe that's why
Click to expand...
Click to collapse
Depends who you ask. I'd agreed or at least say they are focused on Eastern Europe.

Question Questions before touching new unit

Hello guys,
I just found a local shop in my country for head unit and they installed the unit for me.
Everything was working except the 360 camera but they put a relay and now it's fine.
Spoiler: The Unit
Android version : 10
Baseband version :
FM_BASE_19C_W20.39.2|shark15pro_modem|09-28-2020 20:23:22
MARLIN3_20A_W21.25.1|sc2355 marlin3 Jite|06-21-202104:16:29
Build number :
QP1A.190711.020 release-keys
System Info
APP2021-07-09 10:31:45
CPU Info
CPU:UIS7862 Octa-Core [email protected] GB(Memory) + 64 GB(Storage)
MCU Version
2021.07.16 11:12:21 NOR_53_L6315_G23P48F64_V:1.0_FYT
Bluetooth Version
BLINK_2161 _RELEASE/2021:09:14:17:44:20 blink
CAN Protocol Version
XC8210910 FaOaCO
I would like to change the interface I really don't like it,
I tried different Car Launcher but still not very happy..
I prefer to ask if it's possible before crashing everything (I did a backup in case)
I don't have any information about the vendor
Then if I understand I will have to choose between Mekede, Joying and Teres
Thank you for your help
FYT = 1
Yes I found that in the backup I did with your apk
So it means that I can proceed ?
You can just install launchers and uninstall them if you don't like.
You can toggle between the home launchers also in the apps default.
Im looking for something customizable
For exemple I’d like to see my km range on the main screen or the average consumption.
Also for the speed, it use the gps value but is it possible to get this value directly from the car ? Same as the rpm
launchers are the way.
I like AGAMA but CarWebGurus has good support and customizations as well as Fcc CarLauncher or Car Launcher (free/pro)
Thank you I will check them out !
I have the exact same unit. What is the brand and model of this unit?
badai said:
I have the exact same unit. What is the brand and model of this unit?
Click to expand...
Click to collapse
There are no 'brands' only made up sellers of various chinese origin factories. FYT =1 according to first post
marchnz said:
There are no 'brands' only made up sellers of various chinese origin factories. FYT =1 according to first post
Click to expand...
Click to collapse
what does FYT=1 means?

Question New head unit unsure of model number. Vendor is is Navifly/mekede

Looking for some info as I got a new head unit from a friend and was looking at how to identify the specific model number and features and update firmware.
HWget info has manufacter as 116 boardtype F, platform 6315
it has a sticker that says 9inch/836/4g/6+128/720/B1/CP
I know it is a 9inch 4g capable, 6gb/128rom, 720 screen with built in carplay
I don't know what the 836 and B1 mean.
Some additional questions beyond simply identifying this:
EQ says "surround sound has been closed" when you select the surround tab
Can you get carwebguru to recognize the BT player?
How to tell if this can support 360?"
can 360 be added (am conformable with soldering on the mainboard)
carlink 2.0 does not connect to phone
what is "plug in serial device setting? Has options "accelerator / accelerator3b / kq TPMS / serial plugin 360"
I thank you in advance.
Post android system information directly from Android, including MCU version
it's a Navifly 7862
jdoe6783 said:
it's a Navifly 7862
Click to expand...
Click to collapse
No such thing
marchnz said:
No such thing
Click to expand...
Click to collapse
https://www.google.com/search?q=nav...oAA&biw=2512&bih=1336&dpr=1.5&ih=1336&iw=2512 yes it is.
jdoe6783 said:
https://www.google.com/search?q=nav...oAA&biw=2512&bih=1336&dpr=1.5&ih=1336&iw=2512 yes it is.
Click to expand...
Click to collapse
They are made up brand names. The are sellers of various factories.
marchnz said:
They are made up brand names. The are sellers of various factories.
Click to expand...
Click to collapse
Ok well that's what pops up when I copied and pasted the information you gave into Google. You can't say something isn't real when I show you proof contrary. Also if you can give more info like an MCU number instead of the vague HWinfo results people can actually help you pinpoint a specific model instead of "supposedly fake" head units.
gossipninja said:
Looking for some info as I got a new head unit from a friend and was looking at how to identify the specific model number and features and update firmware.
HWget info has manufacter as 116 boardtype F, platform 6315
Click to expand...
Click to collapse
Manufacturer ID =116 already limits it to Mekede/NaviFly, Prelincar, Hencheng, Yiling, Hopod, prelincar, coho (and a few more) where some of them use the "YIN" identifier in the firmware. So you could use a Mekede firmware which is still regularly updated (latest update firmware 23 September 2022)
jdoe6783 said:
Also if you can give more info like an MCU number instead of the vague HWinfo results ...
Click to expand...
Click to collapse
What do you mean with the MCU number? The MCU in all the 7862/8514a FYTs is identical. The MCU firmware inside that identical MCU might be slightly different dependent on the hardware, and that is determined exactly by the manufacturer id (displayed by the "vague HWInfo" , which lists much more info inside the zip, when that zip would have been shared).
Anyway, OP can flash a Mekede firmware with manufacture id 116, or a Joying with id 43 where he needs to update the AllAppUpdate.bin to put in the right manufacturer id (and/or bluetooth id). You can get that info all from the HWInfo.zip files.
The model number is completely irrelevant for a firmware flash. 9" 10" only differ in having 360 camera software or not.
Only difference make the Tesla style units as they use a different screen rotation and slightly differently built android apks.
I updated using medeke firmware to latest and eq surround sound is fixed, as is carlink.
Still no idea if carweb guru can be used for BT audio control (as I do like the look of some of the themes)
360 cannot be added internally since the IC is not sold independant the unit. maybe I'll find a donor unit someday.
Still no 100% sure on the "plug in serial device setting" but I'd imagine that is used for teyes front radar, or some other accessories. I have seen some 360 boxes that have an RX line to an android head unit so maybe that is what "serial plugin 360" is? which would let me add 360 without the IC, since the box would have it.
Appreciate the feedback.

Question Seeking advice on flashing alternative software to "Nevegetor" HU

surfer63 said:
Manufacturer ID =116 already limits it to Mekede/NaviFly, Prelincar, Hencheng, Yiling, Hopod, prelincar, coho (and a few more) where some of them use the "YIN" identifier in the firmware. So you could use a Mekede firmware which is still regularly updated (latest update firmware 23 September 2022)
What do you mean with the MCU number? The MCU in all the 7862/8514a FYTs is identical. The MCU firmware inside that identical MCU might be slightly different dependent on the hardware, and that is determined exactly by the manufacturer id (displayed by the "vague HWInfo" , which lists much more info inside the zip, when that zip would have been shared).
Anyway, OP can flash a Mekede firmware with manufacture id 116, or a Joying with id 43 where he needs to update the AllAppUpdate.bin to put in the right manufacturer id (and/or bluetooth id). You can get that info all from the HWInfo.zip files.
The model number is completely irrelevant for a firmware flash. 9" 10" only differ in having 360 camera software or not.
Only difference make the Tesla style units as they use a different screen rotation and slightly differently built android apks.
Click to expand...
Click to collapse
Hey there, @surfer63 !
I just purchased this 2k resolution 8GB RAM and 128GB ROM model from “Nevegetor”. The unit seems to be a newer style with a nicer, fuller screen and such. My question is - can I flash a Mekede firmware, as the UI that comes from this distributor is a bit bland? The unit should arrive in January. I am also going to need to figure out his to use my OEM camera in my 2018 Hybrid RAV 4.

Categories

Resources