Related
This is not a guide as such but more of direction to other peoples hard work and effort. I am not a developer, just an experimenter!
Main Credits - @MishaalRahman and @phhusson.
For me one of the main selling points of the Mediapad M5 was being Project Treble enabled. Being a big Nexus/Pixel fan I am not particularly fond of EMUI.
So after reading this detailed and clear guide by Mishaal Rahman http://www.xda-developers.com/flash-generic-system-image-project-treble-device/, I was able to successfully install an AOSP Generic System Image by phhusion http://forum.xda-developers.com/project-treble/trebleenabled-device-development/experimental-phh-treble-t3709659
My device - CMR-W09 (10.8" non pro wifi).
I flashed v17 with Gapps and SU and apart from an Android System error upon boot it seems to work ok. I have not had much time to play with it but so far Wifi, Bluetooth, sound, camera, fingerprint sensor, MTP and SD card appear to be working. I had issues with google play not downloading apps but worked after clearing data/cache on google play and google play services. Also have issues with superuser force closing.
For the nervous and unsure, you can easily return to stock Huawei firmware by flashing your devices stock system.img in fastboot.
Obviously bootloader needs to be unlocked see guide - https://forum.xda-developers.com/mediapad-m5/how-to/bootloader-unlock-guide-t3781275 by @Apo11on. You can use Apo11on's root guide to download your firmware to get your stock system.img.
OEM needs to be disabled in developer options.
It is best to factory reset via recovery mode and then boot straight into bootloader to keep FRP unlocked.
Do this at your own risk but please read all the available information and guides on XDA.
pphusion has made other Project Treble roms but I have yet to try them. Hopefully it would be nice if someone could fully develop Lineage for this device.
which rom did you use ? the A/B one or A only ?
It's an A-only device.
I tried AOSP with GAPPS and SU but SuperSU shows the su binary as being occupied through several reboots. Getting the Lineage GSI now and will root with magisk.
Edit:
Blah... Lineage is not an option until we have twrp :/ (at least for me) No way to install GAPPS.
Edit:
SU works with phh's super user available from the play store.
Yes i have the AOSP one now on my AL-09 and it works fine till now. Bugs : home Button not working but fingerprint works, supersu with the phhs one works. Bluetooth sometimes gives an error message. Battery drain is a little bit high. I installed the Huawei camera apk from treble forum and This works also good.
Another Bug is Apps sometimes force closing but Not often.
How is Lineage performing?
A little bit off topic, but how did you unlock the bootloader on the Wifi only version since the website for the code is offline for a few weeks now?
Thanks in advance.
Fantastic to see that Treble works.
On my AL09(ASOP with gapps and su) bluetooth never connects to any of my devices and fc on pairing.
Lineage was a non-starter, since I was unable to get gapps running. I was also getting a vendor mismatch toast. I'm back on the stock .125(C00), no working tether is infinitely more useable than no BT.
It was nice to be able to flash something that didn't brick it and was partially useable.
fargonaz said:
On my AL09(ASOP with gapps and su) bluetooth never connects to any of my devices and fc on pairing.
Lineage was a non-starter, since I was unable to get gapps running. I was also getting a vendor mismatch toast. I'm back on the stock .125(C00), no working tether is infinitely more useable than no BT.
It was nice to be able to flash something that didn't brick it and was partially useable.
Click to expand...
Click to collapse
I understand, Do you think it gets more stable for our device in the future?
florian-m19 said:
I understand, Do you think it gets more stable for our device in the future?
Click to expand...
Click to collapse
I think so, if you look at the github comments there is a huawei phone having the same problem, so as long as a phone is having problems it should get fixed
We would like some screenshots to see if this is real @AndDiSa @rcstar6696 @phhusson @MishaalRahman
Just installed it, attached a few screenshots. Haven't tested it a lot, but it boots.
Wie are Not joking, its real ??
Delete, double post
I will be getting my Mediapad M5 8.4 tomorrow and will be flashing the AOSP treble build straight away. Just a heads up a updated build has just been posted with some Huawei related fixes.
i flash it now, and give feedback tomorrow
I flashed the new one with gapps and su, and for the sht-l09 there is no working bluetooth, so that's as far as I go. It will be nice when the BT is fixed for this device.
Works good with dirty flash, Home Button is working now and also Automatic Brightness, but battery draining is really high and it gets hot.
florian-m19 said:
Works good with dirty flash, Home Button is working now and also Automatic Brightness, but battery draining is really high and it gets hot.
Click to expand...
Click to collapse
Have you tried changing the cpu governor? Is it set to something like interactive? I got my Mediapad today but I am waiting for the bootloader unlock code from Huawei.
darren1 said:
Have you tried changing the cpu governor? Is it set to something like interactive? I got my Mediapad today but I am waiting for the bootloader unlock code from Huawei.
Click to expand...
Click to collapse
yes it is on interactive, should i change this ?
florian-m19 said:
yes it is on interactive, should i change this ?
Click to expand...
Click to collapse
Might be worth experimenting with. Try conservative or ondemand if they are available. You can always change back if it doesn't make any difference.
darren1 said:
Might be worth experimenting with. Try conservative or ondemand if they are available. You can always change back if it doesn't make any difference.
Click to expand...
Click to collapse
okay i change it in helix engine to ondemand and the suspend engine is now on powersafe.
EDIT & TL;DR:
(i) Some people on this thread say they have "no problems with the upgrade", but many, many people do. To me that confirms the advice of this post: don't gamble, it's not worth it.
(ii) Also note that some people say that their battery life improved with Android 10… but then it turned out that on Pie, for some reason, they had a battery life of three hours, instead of the awesome times that the rest of us are getting. In short: if someone says that Android 10 is awesome, try to read between the lines.
Original Post:
Long story short.
Upgraded to Android 10.
"Search" stopped working within Settings
Battery life went from Awesome to Awful, Awful, Awful (known issue)
Fought the battery issue for two days (requested help with BBS dump)
Downgraded to Pie using TWRP backup (mistake)
This bricked the phone
Spent a whole day unbricking
Have my phone back but lost local files (photos, documents)
Android Pie ain't broke… Don't be like me, there's nothing to fix, the OP7 on latest Pie is awesome, it's all downhill from there.
Im on android 10 OOS10.0.1, rooted, magisked, viper installed, blu_spark-r57 installed. everything is perfect. search is also working.
but i fully clean flashed the entire android 10 firmware. maybe try that? i backed my stuff up on my PC prior to this.
who ah way said:
Long story short.
Upgraded to Android 10.
"Search" stopped working within Settings
Battery life went from Awesome to Awful, Awful, Awful (known issue)
Fought the battery issue for two days (requested help with BBS dump)
Downgraded to Pie using TWRP backup (mistake)
This bricked the phone
Spent a whole day unbricking
Have my phone back but lost local files (photos, documents)
Android Pie ain't broke… Don't be like me, there's nothing to fix, the OP7 on latest Pie is awesome, it's all downhill from there.
Click to expand...
Click to collapse
But that's not a general recommendation to not update to Android 10
strongst said:
But that's not a general recommendation to not update to Android 10
Click to expand...
Click to collapse
Sure, it's just one person's experience. It caused me a lot of grief, and I don't see the point of taking the risk. For the few days I was on 10 I didn't see any benefits, only drawbacks.
Pie to stable 10 then beta 4, is just keeps getting awesome. But hey maybe its just me. Factory reset and no apps restore
Didit_Anshari said:
just keeps getting awesome
Click to expand...
Click to collapse
What would be one or two specific improvements you've found from Pie to Q?
who ah way said:
What would be one or two specific improvements you've found from Pie to Q?
Click to expand...
Click to collapse
battery life, and animation
I can confirm. Even on a clean install battery backup is significantly less on Android 10. Last Pie update gave me like 10+ hours of SOT.
Saadkhalid786 said:
Im on android 10 OOS10.0.1, rooted, magisked, viper installed, blu_spark-r57 installed. everything is perfect. search is also working.
but i fully clean flashed the entire android 10 firmware. maybe try that? i backed my stuff up on my PC prior to this.
Click to expand...
Click to collapse
Apps to display in full screen not working in 10
Don't know what's the problem with the battery this screenshots from OpenBeta 4 and now i'm on OpenBeta 5 will see how's the battery there :good: for me on every OpenBeta no problem with the battery life :good:
Maybe the reason is that I always to a fresh start from the scratch with every OpenBeta :good:
Sent from my OnePlus7 using XDA Labs
In android 10, Having auto brightness issue getting too low in medium litt conditions...
SherryWadhwa said:
In android 10, Having auto brightness issue getting too low in medium litt conditions...
Click to expand...
Click to collapse
Is not a issues, it's settings to aggressive. For resetting the auto brightness go in settings and tap on the in the screenshots marked points.
That resets the auto brightness and takes some days to learn it new :good:
Sent from my OnePlus7 using XDA Labs
Thanks mate! Tried it but still having a little issue at some point.
anyone can use sip calls with the default phone app and loudspeaker?
GraveDigger176 said:
Don't know what's the problem (...)
Maybe the reason is that I always to a fresh start from the scratch with every OpenBeta :good:
Click to expand...
Click to collapse
That's right, if you're installing from scratch, that doesn't count as an upgrade… And this thread is about warning people about upgrading to Android 10.
Let's cut through the noise for a moment.
Is there ANYONE on this thread who has actually done an UPGRADE as suggested on the guide below, and who is NOT experiencing pain with Android 10?
The Guide (see the section called 2. UPDATE):
https://forum.xda-developers.com/oneplus-7/how-to/guide-unlock-bootloader-flash-twrp-root-t3954559
1. [OPTIONAL, but highly recommended]Backup everything in case of issues!
2. Download the full rom zip file and place it into the root folder of your storage(/storage/emulated/0)
3. Go to Magisk Manager App and uninstall all modules
4. Go to Android settings -> system -> system update and hit gear icon top right -> local upgrade, don't reboot yet!
5. Flash "TWRP ZIP" within Magisk Manager App like a Module: Magisk Manager App -> Menu -> Modules "+". This installs TWRP to both a/b partitions.
6. Install Magisk via Magisk Manager App again: Magisk Manager App -> hit install after your Magisk version -> hit again install -> hit "install to inactive slot"
7. Reboot your device
8. Reinstall your Magisk Modules
Your device is now updated via local upgrade and you keep TWRP and Root
Click to expand...
Click to collapse
who ah way said:
That's right, if you're installing from scratch, that doesn't count as an upgrade… And this thread is about warning people about upgrading to Android 10.
I did also the upgrade from P to Q as I was on stable OOS, but right after upgrade and boot I booted in the stock recovery and do factory reset and the wipe everything wipe and start from the scratch and I never had any mentioned issues. But anyway now i'm on Beta path :good:
Sent from my OnePlus7 using XDA Labs
Click to expand...
Click to collapse
who ah way said:
That's right, if you're installing from scratch, that doesn't count as an upgrade… And this thread is about warning people about upgrading to Android 10.
Let's cut through the noise for a moment.
Is there ANYONE on this thread who has actually done an UPGRADE as suggested on the guide below, and who is NOT experiencing pain with Android 10?
The Guide (see the section called 2. UPDATE):
https://forum.xda-developers.com/oneplus-7/how-to/guide-unlock-bootloader-flash-twrp-root-t3954559
Click to expand...
Click to collapse
Yes, me. I did not face any issues.
I did an upgrade from pie to Q with the same instruction.
3 issues I have.
Autobrightness
Wifi is sometimes disconnecting for a sec and connecting again
Gap below the keyboard
Personally don't have any issues whatsoever with Android 10 - Magisk, kernel, and all. Though its true that if you're on pie there's no point in upgrading. Only added feature that you might enjoy is ever so slightly more customization and android 10 navigation gestures, that's it.
I upgraded to A10 and latest Oxygen and everything is working fine for a month and more, haven't experienced any issues listed above.
Hi,
Can someone build the TWRP image for Oukitel WP6? I'm ready to send $50 by paypal for a working port.
Thanks,
Up to $75.
It's a great phone but Android Pie is a pain in the *ss, keeps closing background apps.
Yaaas i want as well. I can add some money as well this android sucks
Just install phh's AOSP 10.0, x64 AB version. Runs like a charm on mine except VoLTE and VoWIFI, but I don't need those really.
You don't need TWRP to do it, unlock the bootloader then use fastboot to flash the system image.
That worked. Thank you very much.
i successfully installed lineage-17.1-20200607-UNOFFICIAL-treble_arm64_bvN.img.xz
Great, how's your experience with Lineage? As it's based on phh's GSI I assume it's also free of bugs?
I really love the AOSP on this phone, it's blazing fast and battery lasts forever. Last cycle 8 days, 34h SOT xD
GroovyG said:
Great, how's your experience with Lineage? As it's based on phh's GSI I assume it's also free of bugs?
I really love the AOSP on this phone, it's blazing fast and battery lasts forever. Last cycle 8 days, 34h SOT xD
Click to expand...
Click to collapse
Yes, all the GSI roms seem to be based on phh's. So all have the same issues:
- In call volume not working, it is stuck at max which is very annoying
- You can't disable the second sim card, you need to take it out if you don't want it to consume battery.
That's all i found so far, unfortunately i bricked mine. I tried to relock the bootloader being on a custom rom so it's stuck now with a boot loop.
Oh, I hadn't noticed those two as I always have call volume on max anyway and only use one SIM. You can submit bug reports here
Can't you unlock it again from fastboot? During the bootloop you can access ADB and reboot bootloader. You can't really completely brick those devices.
GroovyG said:
Oh, I hadn't noticed those two as I always have call volume on max anyway and only use one SIM. You can submit bug reports here
Can't you unlock it again from fastboot? During the bootloop you can access ADB and reboot bootloader. You can't really completely brick those devices.
Click to expand...
Click to collapse
Yes, i can access it through fastboot, but when i input the unlock command it says permission denied or something like this.
As the title says, here's a list of some GSI's i have tested so far... but first for some story.
Bought the phone in summer, it's quite nice but has its own issues like no kernel source BUT since we can unlock the device and actually play around, oh boy it has been fun.
On the course of few hours and many downloads later I have a small list of GSI's that worked!
Every GSI I have mentioned REQUIRE device specific patch(es)!!!
For that you have to root.
----------------------WORKING GSI's-------------------------
BlissROM - It boots and functions quite fast
Cons: no included Gapps
Flashing any system editing patch results in "Phone is booting" homescreen.
https://sourceforge.net/projects/treblerom/files/BLESS/2020.09.21/
3.5 jack, VoLTE, Bluetooth, ComboFix patches are required, flash with Magisk manager
DO NOT USE FixLagSmooth
HavocOS 3.7 and 3.6 - Work and can be daily driven
3.6 requires FixLagSmooth patch
MUST root and apply all linked patches (don't use FixLagSmooth on 3.7, you can but no need)
https://forum.xda-developers.com/mi...rom-how-to-install-android-10-gsi-mi-t4126223
AOSP Android 10 based - Also does work and requires patching
https://forum.xda-developers.com/mi...rom-how-to-install-android-10-gsi-mi-t4126223
HydrogenOS Android 10 - Works
Has few bugs
No Google services
https://mirrors.lolinet.com/firmware/gsi/HydrogenOS/
----------------------COMMUNITY REPORTED GSI's-------------------------
Android 11 GSI - Reported to be functional by HumptyPotato47, thanks mate!
No Gapps as of now NikGapps exist for Android 11, search XDA for it!
Requires more testing...
https://github.com/phhusson/treble_experimentations/releases/tag/v300.f
----------------------MAYBE WORKING GSI's-------------------------
OxygenOS 10 GSI - Seems to work.. sorta
First boot after exiting fastboot causes the phone to reboot
Second boot will loop
https://mirrors.lolinet.com/firmware/gsi/OxygenOS/
----------------------NON FUNCTIONAL GSI's-------------------------
You tell me
...I did find a very nice list of GSI ROMs to try out more, here's the link:
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
----------------------FLASHING GSI-------------------------
If you test one then don't hesitate with replying which one, about the experience, bugs and how you installed it.
My method of installing was this:
1. Make sure to have the new adb commandline that supports fastbootd mode
2. Drop the GSI .img file in /adb directory for ease
3. Make sure you're running MIUI with unlocked bootloader and USB debugging enabled
3.5 MAKE SURE you get a GSI ROM with Gapps as existing TWRP isn't fully functional
4. GSI you should have must be AB partition!!!
Once all set then follow the next commands
>adb reboot bootloader
>fastboot -w
>fastboot reboot fastboot
>fastboot erase system
>fastboot flash system "GSI-ROM-name-without-quotes".img
>fastboot reboot bootloader
>fastboot reboot
----------------------SETTING UP GSI-------------------------
Once all that is complete it should boot, if not then that specific GSI does not work.
Also a thing worth mentioning! Whenever I boot this phone to fastbootd Windows keeps forgetting what driver it was which requires
few extra clicks in device manager to set it up for fastbootd use. Including an image with simple to follow instructions if you have the same issue.
>fastboot boot twrp.img
Once in TWRP you should be able to access internal storage with your computer, drag Magisk.zip over and flash. Don't forget to wipe cache!
If it boots normally then root was successful, now apply the linked patch and reboot once again. Since we are playing with GSI:
Head to Settings
Find Phh Treble Settings
Misc features
Check Disable audio effect. -- DISABLE IT AFTER PATCHING!!!
IMPORTANT!!! I only tested Havoc and Bliss for a long period, IF one of my mentioned GSI's or others require more patches then I have linked headphone jack and Bluetooth audio patches too.
Combo fix should do the trick thought so your mileage may vary.
----------------------HELP US-------------------------
IF you find more working GSI's then tell us and I will make sure to add them to the main post so it won't get clogged under other comments!
Update on 05.10.2020 GMT+3
Bliss ROM GSI
As only a day or two have passed I already encountered few issues.
> You cannot remove screenshot sounds, even when fully muted
> Data drain is something interesting I've noticed, consumption compared to MIUI is higher.
> When using the gesture navigation it is a bit buggy when using quick side swipe for multitasking.
Positive notes!
> It is stupid fast
> Battery life is good
> GCam is amazing
> 99% of the customization options work perfectly
> Fast charging modes and such work perfectly
Neutral stuff...
> No FOD, thanks for closed source
> whenever you take a picture or a screenshot and have Blutetooth audio connected, it pauses and plays out loud via speaker. No music leaks out
this phone is born dead, no developer cares about it.
alsartawi said:
this phone is born dead, no developer cares about it.
Click to expand...
Click to collapse
Sad truth but won't stop others from working on it. Eventually we might get a kernel source
Kevin Soosaar said:
Sad truth but won't stop others from working on it. Eventually we might get a kernel source
Click to expand...
Click to collapse
i would pay to see a stable custom rom for this phone, i really loved it.
alsartawi said:
i would pay to see a stable custom rom for this phone, I really loved it.
Click to expand...
Click to collapse
Havoc OS and Bliss ROM are both quite stable, albeit with Bliss you don't get Gapps which is a huge bummer to most users.
Personally I just installed MicroG services and use Aurora store with anonymous "account".
When I tried to flash Gapps with TWRP I ended up soft bricking ROM so it was required to restore stock and try again. Of course there's no need if you can still use fastbootd.
Kevin Soosaar said:
Havoc OS and Bliss ROM are both quite stable, albeit with Bliss you don't get Gapps which is a huge bummer to most users.
Personally I just installed MicroG services and use Aurora store with anonymous "account".
When I tried to flash Gapps with TWRP I ended up soft bricking ROM so it was required to restore stock and try again. Of course there's no need if you can still use fastbootd.
Click to expand...
Click to collapse
does FOD works on Havoc OS?
edit: sorry i just read that it's not working.
alsartawi said:
does FOD works on Havoc OS?
Click to expand...
Click to collapse
FOD is not working as the driver sources are not public, reverse engineering is not possible too afaik. Everything else works.
Should i send this phone back to Amazon?
Seriously, last night i bought it, thinking about to install some custom rom, but if there are no developers caring of it, i might returb the phone to the seller...
IMO MIUI EU is better then GSI roms. Everything works. Got rid of most chinese crap. You can use Magisk.
Have nice features (MIUI in general). The only thing i dont like -mine turns on WIFI byitself dotn know how it happens... but it happens when i sleep. china collecting logs?
https://www.scmp.com/abacus/tech/ar...earch-and-browsing-data-china-researcher-says
afigienas said:
IMO MIUI EU is better then GSI roms. Everything works. Got rid of most chinese crap. You can use Magisk.
Have nice features (MIUI in general). The only thing i dont like -mine turns on WIFI byitself dotn know how it happens... but it happens when i sleep. china collecting logs?
https://www.scmp.com/abacus/tech/ar...earch-and-browsing-data-china-researcher-says
Click to expand...
Click to collapse
Literally the main reason I made this post is to help others who are interested to use GSI ROM's on their devices. I do agree that MIUI has some decent features and I did use Xiaomu.eu before but it was so buggy. In the end I love customizing the device however I like it so MIUI is just not for me. Either way I might try to negotiate with Amazon to get a refund as touch and Bluetooth problems still persist. Fun fact, on Bliss the edge detection is pretty good and not as aggressive or straight out bad.
Simon_19 said:
Seriously, last night i bought it, thinking about to install some custom rom, but if there are no developers caring of it, i might returb the phone to the seller...
Click to expand...
Click to collapse
Actually there are plenty of people ready to build ROMs for Toco (Mi Note 10 Lite) and Tucana (Mi Note 10) but there just isn't any kernel source available. Making things worse is the cancelled release of Toco in India and we know that they are one of the biggest Android ROM builders next to Russians. No one there is gonna import a device like this because better phones for money exist. If you don't like it then yeah I recommend returning otherwise give GSI a try for now and see what happens.
You won't lose warranty as there is no E-fuse like on Samsung phones so locking bootloader and flashing back to stock is enough.
Is anyone try oos gsi ?
HumptyPotato47 said:
Android 11 GSI of phh is working fine. It is very smooth. But i switched back to miui because i can't find any android 11 gapps.
Click to expand...
Click to collapse
can you give the link of the rom?
HumptyPotato47 said:
Android 11 GSI of phh is working fine. It is very smooth. But i switched back to miui because i can't find any android 11 gapps.
Click to expand...
Click to collapse
Hi, there are gapps for Android 11, look for NikGapps here in XDA
Kevin Soosaar said:
Actually there are plenty of people ready to build ROMs for Toco (Mi Note 10 Lite) and Tucana (Mi Note 10) but there just isn't any kernel source available. Making things worse is the cancelled release of Toco in India and we know that they are one of the biggest Android ROM builders next to Russians. No one there is gonna import a device like this because better phones for money exist. If you don't like it then yeah I recommend returning otherwise give GSI a try for now and see what happens.
You won't lose warranty as there is no E-fuse like on Samsung phones so locking bootloader and flashing back to stock is enough.
Click to expand...
Click to collapse
who said its cancelled?
Dr. DoubtReaper said:
who said its cancelled?
Click to expand...
Click to collapse
The mentioned Mi Note 10 Lite for India was supposed to be called Mi 10i or something like that. It quickly disappeared and is not happening.
Of course I might be wrong by this date but looking for now there is no 10i, only speculation videos and threads.
Mi Note 10 Lite for India would've been code named "tocoin", same hardware and everything else so just a rebadge in old Xiaomi fashion... :laugh:
anyone tried new version of blissROM? feedback?
GaryFisher88 said:
anyone tried new version of blissROM? feedback?
Click to expand...
Click to collapse
Not sure if the one I linked is up do date, give it a try yourself as my device went in for warranty repairs.
Hello, I am currently using Xiaomi.eu based on MIUI 12 and I would like to know how to flash HAVOC OS GSI. Should I flash back to Global Rom then flash the GSI as indicated? Answer is greatly appreciated.
This may found unusual but I really want to revert back to MIUI, mainly because of the camera app. Gcam has made my life worse because of shoddy module intergration and the gallery opening delay, even with many .xmls I have downloaded. MIUI is getting better every day, and there are ways to debloat it and remove the ads, so I expect that it will get better.
There have been ways to revert the phone back to MIUI and lock the bootloader, most of them involves the MiFlash tool and jt is known to be unstable and brick your device. Is there anyway to lock the bootloader and revert to MIUI without the MiFlash tool?
Thanks in advance
hi there, if you are on a custom rom then you can get back miui camera, follow this video
. it will help you install miui/ANX camera on your phone, however if you still dont like it you can follow this guide and it will show you how to get back to stock miui,
.
if you still need help just ask again.
Thanks! I'll reply to you later
I think the gallery delay is actually HDR processing. If you turn off HDR, then images appear in gallery immediately.
BreadGyarados said:
This may found unusual but I really want to revert back to MIUI, mainly because of the camera app. Gcam has made my life worse because of shoddy module intergration and the gallery opening delay, even with many .xmls I have downloaded. MIUI is getting better every day, and there are ways to debloat it and remove the ads, so I expect that it will get better.
There have been ways to revert the phone back to MIUI and lock the bootloader, most of them involves the MiFlash tool and jt is known to be unstable and brick your device. Is there anyway to lock the bootloader and revert to MIUI without the MiFlash tool?
Thanks in advance
Click to expand...
Click to collapse
very important: ANTI-ROLLBACK
Xiaomi's Anti-Rollback Protection Explained: How to avoid bricking your phone
All Xiaomi smartphones and tablets will have anti-rollback protection enabled. What is it and how do you avoid bricking your device because of it?
www.xda-developers.com
Have you tried xiaomi.eu rom... It's basically the same as stock miui rom with some tweaks and ads removed
eharada said:
very important: ANTI-ROLLBACK
Xiaomi's Anti-Rollback Protection Explained: How to avoid bricking your phone
All Xiaomi smartphones and tablets will have anti-rollback protection enabled. What is it and how do you avoid bricking your device because of it?
www.xda-developers.com
Click to expand...
Click to collapse
hi so I have successfully resotred my phone and there are absolutely no problems at all
the camera app works flawlessly now
popej said:
I think the gallery delay is actually HDR processing. If you turn off HDR, then images appear in gallery immediately.
Click to expand...
Click to collapse
I see
BreadGyarados said:
hi so I have successfully resotred my phone and there are absolutely no problems at all
the camera app works flawlessly now
Click to expand...
Click to collapse
this is the way!