Today I upgraded oxygen OS 11 with the latest oxygen OS 12. I have an unlocked phone and the upgrade went fine. The new system has updated correctly. When I tried to instal TWRP recovery, a problem arose because the phone started fastboot mode just for a second and then immediately entered start mode. I have tried all possible variants to access fastboot mode, but the result is always the same. Can anyone help me how to replace stock recovery with TWRP or somehow enter in fastboot mode that is accesible just for a second.
Related
Hey folks,
i have a problem with my shieldtablet. The fastboot doesn't work properly. I cannot load anything via "fastboot flash blablabla.img". Minimal ADB and Fastboot just shows "waiting for device" and if i check the devices via "fastboot devices" is just shows nothing but the normal command prompt.
Then i did a mistake and flashed the twrp 3 version with an older one, so i am unable to enter the recovery-mode. If i chose Recovery Mode via bootloader (or if i restart the tablet into recovery mode) it has a short bootloop and then after some trials it starts normal into Blisspop.
How could i flash this without the fastboot? Is there any trick i could use?
The tablet is unlocked. I had several custom-roms installed. Currently Blisspop 6.4 without playstore.
That looks like your PC is not seeing your tablet. Boot into fastboot mode, connect it to your PC and look in Windows device manager for the device.
Thanks a lot! ADB worked fine on Win10. Last time I flashed the recovery was on my old Win7-System. It seems, that the Upgrade deleted just the fastboot drivers.
One last question: is it normal, that if i chose the fastboot protocoll entry on the bootloader, that it restarts the bootloader?
Yes, that's normal. The menu entry is redundant because when you see it you are in fastboot mode already.
Hello,
as the title says... I bricked my phone. In the past, I successfully installed LineageOS on my old Galaxy S3. I got a used Huawei P9 Lite recently and wanted to install a custom ROM. Here's what happened:
1. Unlocked the phone
2. Accessed Fastboot mode
3. Installed TWRP* via fastboot flash recovery file.img
4. This didn't work and I read on the web, I could try to flash revocery2 with fastboot flash recovery2 file.img
5. This didn't help either, so I decided to cancel my plan and use the manufactorer's system since the system still booted (of course, I didn't install any custom OS).
6. The phone told me on each startup it's unlocked. I didn't need the unlock anymore, so I accessed the Fastboot mode again.
7. I re-locked the system by using fastboot oem relock password.
8. The phone asked me to do confirm this action and do a factory reset
9. After this, I'm stuck at the Huawei logo and can't access Fastboot mode anymore!
When I shut down the phone, it immediately restarts itself. No chance to get into Fastboot mode again, which I did through pressing Vol- and plugging in an USB cable.
*I tried several versions, 3.0.1 and 3.2.1 since no version worked
This may be a beginner's fault, my last phone was already unlocked and I had not a single problem back then. But this time... I hope you can help me.
What would happen if I let drain the battery down to 0% - the phone wouldn't restart of course. If I press Vol- and plug it in, would I come back to Fastboot mode or would it stay in this loop?
Any help is appreciated!
So I wanted to install the latest official update from Asus (was running android 10) and in twrp i cleared system, vendor and the rest and rebooted. Now the phone is stuck in "fastboot mode" but I can't read it via fastboot devices. I can just select start, restart bootloader, recovery mode and power off. Windows is showing an unknown device. How can I get fastboot to work again?
nvm, installed the android driver to get fastboot to work and then used this https://forum.xda-developers.com/t/guide-how-to-unbrick-your-zenfone-6-zs630kl.3998767/ to get it to work.
I tried installing the pixel experience rom and after I flashed the aex recovery before side loading the ROM, it went into bootloop and ended up with the stock recovery and ROM. I tried to flash TWRP recovery and go a message that the the boot/recovery image is destroyed so I tried to flash the stock boot image back and since then I am not able to get it out of fastboot mode.
I tried everything, flashing the recovery again, both stock and TWRP and also tried using the flash-all to flash the stock ROM back but nothing seems to be working.
When using the flash-all, I get 'partitions not found' and 'flashing is not allowed in critical partitions' error.
I even tried msmtool but I am not able to get my phone into edl mode for the tool to detect it.
Tried holding the vol+/vol- and connecting the usb cable but to no vain, the tool does not seem to detect it.
I even tried using the all-in-one tool but my phone is not getting detected when it is turned off but it gets detected when it's in flashboot mode from where I cannot enter edl.
Let me know if there is anything I can do to fix it? Or if taking the phone to the official service center help?
Can you reboot from fastboot to edl by entering fastboot reboot-edl? Or similar, don't know exactly anymore
Alternatively see if this can help you getting into edl: https://forum.xda-developers.com/t/guide-how-to-reboot-to-edl-from-fastboot.3394292/
Hello, i installed the official Miui 14 update 3 days ago( not from flashing , from software and updates ). Everything was fine until today when i opened my phone it powered off and after Powering On, it went into Miui Recovery 5.0, after some suggestions online, i wiped the data but that didn't fix the problem, after restarting several times, now instead of recovery , my phone goes into fastboot mode. So kinda it is stuck in fastboot mode, after some time it powers off, then after starting goes again in fastboot mode. Can anyone help?
Device Details:
Redmi Note 11 Global - spes - 2201117TG
Is Phone Unlocked - No
Did i install Custom Rom - No
Try to stop it via Fastboot commands
Code:
fastboot devices
fastboot reboot