Database Info

6045 brick?

I have an alcatel 6045b that's currently on eugla firmware but when i get to setup screen
It reboots
It was at lollipop at first
Then I tried to install alek os after installing twrp and unlocking boot loader
But I got mount system errors while flashing the rom
So I rebooted
It rebooted to an unknown os
Same scenario, when it gets to setup it freezes and reboots all over again
I managed to shut it down by holding power button and volume +
I also can't get to twrp no matter what I do
But I can get to download mode
Things I have tried:
Mobile upgrade q: while its working the device reboots from download mode and mobile upgrade q gives me 'download update software package failed'
I then installed the Panasonic eugla file which installed on the device but at setup screen it freezes then reboots.
But I can get to stock recovery now and download mode also.
Pls I really need help in restoring my device
Any piece of help is extremely appreciated.
Sorry for my poor English

Try again but...
If you are now able to get to download mode try flashing TWRP again but this time try a different ROM. I would recommend Resurrection Remix

Dubstepwolf123 said:
If you are now able to get to download mode try flashing TWRP again but this time try a different ROM. I would recommend Resurrection Remix
Click to expand...
Click to collapse
How do I flash twrp via download mode?

How to flash TWRP
Here is the forum I just made saying how to Unlock/Root/Flash the Alcatel Idol 3
The sections you should look at are "What you will need", "Files Needed", "Getting things ready on Windows", "Preparing Phone" and "Flashing TWRP to the phone"
https://forum.xda-developers.com/idol-3/general/guide-unlock-flash-root-updated-alcatel-t3751845

OK
So I was able to install twrp 2.8.7.0 via sahara tool
Then I copied alek os into the internal storage
Flashed the ROM
But stuck at 'Alcatel' powered by android screen
I then restored mm backup by marionette
And still stuck at Alcatel screen
Then flashed cm 12.1
Same thing
Stuck at Alcatel screen.
I'm confused.

Frazercrib said:
OK
So I was able to install twrp 2.8.7.0 via sahara tool
Then I copied alek os into the internal storage
Flashed the ROM
But stuck at 'Alcatel' powered by android screen
I then restored mm backup by marionette
And still stuck at Alcatel screen
Then flashed cm 12.1
Same thing
Stuck at Alcatel screen.
I'm confused.
Click to expand...
Click to collapse
Did you follow the entire tutorial?
I just told you which modules to follow to flash TWRP. Since you flashed a ROM, did you follow the "Wiping the Storage" and "Flashing the ROM" modules?
Also, are you using a 5.5 or 4.7? If you are using the 5.5 I'd recommend using the 3.1.1 TWRP

Dubstepwolf123 said:
Did you follow the entire tutorial?
I just told you which modules to follow to flash TWRP. Since you flashed a ROM, did you follow the "Wiping the Storage" and "Flashing the ROM" modules?
Also, are you using a 5.5 or 4.7? If you are using the 5.5 I'd recommend using the 3.1.1 TWRP
Click to expand...
Click to collapse
I'm using the 5.5 model
I'll flash the twrp 3.1 now
Must I flash the resurrection remix ROM
Or can I try alek os after wiping storage

Frazercrib said:
I'm using the 5.5 model
I'll flash the twrp 3.1 now
Must I flash the resurrection remix ROM
Or can I try alek os after wiping storage
I would l
Click to expand...
Click to collapse
The steps I provided should work, just flash the Alex OS ROM instead of Resurrection.
I have a semi throwaway phone so I will attempt you ROMS.

I think my SD card slot is faulty
As the twrp doesn't detect it
Is there a way to sideload the ROM into the inbuilt storage?

[/COLOR]
Frazercrib said:
I think my SD card slot is faulty
As the twrp doesn't detect it
Is there a way to sideload the ROM into the inbuilt storage?
Click to expand...
Click to collapse
So when your on the install menu and you select "Select Storage" your SD Card doesn't show up as an option?

Dubstepwolf123 said:
Here, there is a mini issue with that TWRP and detecting the SD.
Placing the Flashable files on the MicroSD Card
Step 1: Press "Mount"
Step 2: Press "Mount USB Storage"
*Note: "File Explorer" should have opened on your PC*
Step 3: Drag the "open_gapps-arm64-7.1-stock-20180216" and the "RR-N-v5.8.5-20171002-idol3-Unofficial.zip" into the MicroSD Card
Step 4: Wait for the transfer to complete and then Press "Unmount"
Step 5: Press the NavBar Back Button once
---------- Post added at 03:23 AM ---------- Previous post was at 03:21 AM ----------
Or does your SD Card not show up as an option when you select "Select Storage"?
---------- Post added at 03:29 AM ---------- Previous post was at 03:23 AM ----------
So when your on the install menu and you select "Select Storage" your SD Card doesn't show up as an option?
Click to expand...
Click to collapse
Yeah
Thats what am trying to say

Sideload
Sorry about all your issues, flashing has to be a pain sometimes

Did that but twrp said 'Failed'
I should say on twrp 2.8 mtp is detected by windows
But on twrp 3.1 internal storage is shown as 'removable disk' in windows and it keeps asking me to format before I use it
Tried formatting but I always get 'windows was unable to format' error.

Went back to twrp 2.8
Windows detected my device as mtp
I copied the alek os to internal storage
Then flashed twrp 3.1
Wiped system
Flash alek os
Still stuck at Alcatel logo
This is really strange

Frazercrib said:
Went back to twrp 2.8
Windows detected my device as mtp
I copied the alek os to internal storage
Then flashed twrp 3.1
Wiped system
Flash alek os
Still stuck at Alcatel logo
This is really strange
Click to expand...
Click to collapse
Lets try fixing one issue first.
With TWRP 3.1.1 on Idol 3 it doesn't show up on Windows, even for me.
Thats why to make it show up I have to:
Step 1: Press "Mount"
Step 2: Press "Mount USB Storage"
At that point File Explorer pops up automatically or I have to open it manually but my device shows up.

Went back to twrp 2.8
Windows detected my device as mtp
I copied the alek os to internal storage
Then flashed twrp 3.1
Wiped system
Flash alek os
Still stuck at Alcatel logo
This is really strange

Dubstepwolf123 said:
Lets try fixing one issue first.
With TWRP 3.1.1 on Idol 3 it doesn't show up on Windows, even for me.
Thats why to make it show up I have to:
Step 1: Press "Mount"
Step 2: Press "Mount USB Storage"
At that point File Explorer pops up automatically or I have to open it manually but my device shows up.
Click to expand...
Click to collapse
Mine shows as two blank 'Removable device'
I can't get aceess to the storage

Frazercrib said:
Mine shows as two blank 'Removable device'
I can't get aceess to the storage
Click to expand...
Click to collapse
What version of Windows are you running?
It seems as if TWRP 3.1.1 and Windows don't want to communicate with each other :/

Windows 7

Frazercrib said:
Windows 7
Click to expand...
Click to collapse
In TWRP try:
1) Going to Wipe
2) Format Data
3) Type Yes
that might make it show up in windows

Problem booting TWRP recovery (Crash Dump Mode)

I has a pretty big problem of that Crash Dump screen some hours ago and i still can't get to fix it. Here is the story, after trying Havoc 2.0 rom i decided to go back to stock so in TWRP i erased the system, cache (dalvik cache and cache), data and internal storage (i wiped internal storage because TWRP just couldn't decrypt it even though the passwd was correct), after that i flashed the stock OOS rom and the TWRP installer (all these being booted on twrp), but when i rebooted into recovery the twrp splash screen just froze there, so i tried to boot twrp through fastboot, but then the crash dump screen apeared, this post: https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892 said this was a way to recover from that problem so i tried it, it worked as far as booting into OOS is concerned, but when i try to boot into twrp through fastboot the crash dump screen keeps showing up.
Any ideas?

mateuxi said:
I has a pretty big problem of that Crash Dump screen some hours ago and i still can't get to fix it. Here is the story, after trying Havoc 2.0 rom i decided to go back to stock so in TWRP i erased the system, cache (dalvik cache and cache), data and internal storage (i wiped internal storage because TWRP just couldn't decrypt it even though the passwd was correct), after that i flashed the stock OOS rom and the TWRP installer (all these being booted on twrp), but when i rebooted into recovery the twrp splash screen just froze there, so i tried to boot twrp through fastboot, but then the crash dump screen apeared, this post: https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892 said this was a way to recover from that problem so i tried it, it worked as far as booting into OOS is concerned, but when i try to boot into twrp through fastboot the crash dump screen keeps showing up.
Any ideas?
Click to expand...
Click to collapse
Use bluespark twrp not official

ON rom 8.1 best is official twrp
on rom 9.0 best is blues park twrp

yldlj said:
Use bluespark twrp not official
Click to expand...
Click to collapse
akswap said:
ON rom 8.1 best is official twrp
on rom 9.0 best is blues park twrp
Click to expand...
Click to collapse
It worked!
Now i'm installing all my mods again.
Thanks!
UPDATE:
Nevermind, it boots into twrp, but it wont boot OOS, i already tried erasing all the partitions (system, data and cache) and installing OOS and bluspark TWRP.
It turns on, shows the bootloader unlocked screen and then it reboots back to twrp.
UPDATE 2:
Fixed it by erasing all data on oneplus recovery, thanks again, my phone is back from the death (a quite unrooted one).

Fixed it by erasing all data on oneplus recovery, thanks again, my phone is back from the death (a quite unrooted one).
Click to expand...
Click to collapse
When u upgrade from os 8.1 to 9 .0 after flash install blues spark twrp.
When Downgrade 9.0 to 8.1 use official OnePlus6Oxygen_22_OTA_007_all_1805131952_O_MR1.zip
& flash official Twrp & Stable magisk only
for 8.1
1- must have a copy of Oxigen Fastboot ROM 8.1
2- Oxigen 8.1 rom ( Revovery) .zip
3- twrp-installer-enchilada-3.2.3-0zip & img file
for 9.0
4- twrp-3.2.3-x_blu_spark_v9.86_op6.zip & img file
5- magisk 16.7 beta & 17.1 Stable
6- official 9.0 Stable rom
7- tool all in One (PC)
Enjoy flashing

TWRP showing weird folders. HELP!! (OnePlus 6)

Yesterday, I wanted to switch from Evolution X rom to Pixen os on my OnePlus 6. So, I was following the normal procedure .i.e., Flash oos and twrp on both slots, reboot, and then flash pixen. Okay. I successfully flashed oos and twrp on one slot. But, when i rebooted to recovery to flash it again in the other slot, when I went to the "Install" section, I wasn't able to find any of my files! It showed all weird folders like "HGgjajhzYHjwg" . Luckily, since I wasn't able to flash oos on the other slot, I was able to boot to system on the other one, which booted to evolution x (Now I'm currently booted in slot B). What should I do? (I have seen many threads like this, but haven't found a thread on OnePlus 6). Please Help!!

format data when switching to different roms

JohnnyMwanza said:
format data when switching to different roms
Click to expand...
Click to collapse
Now if i format my data, will i be able to boot back to my current rom, evo x? (Sorry, but im a noob)

Backup your data and then oxygen os via fastboot....this worked for me.

MAX TEN said:
Backup your data and then oxygen os via fastboot....this worked for me.
Click to expand...
Click to collapse
You mean, boot to "twrp.img" and then flash oos?

Anmol45 said:
Yesterday, I wanted to switch from Evolution X rom to Pixen os on my OnePlus 6. So, I was following the normal procedure .i.e., Flash oos and twrp on both slots, reboot, and then flash pixen. Okay. I successfully flashed oos and twrp on one slot. But, when i rebooted to recovery to flash it again in the other slot, when I went to the "Install" section, I wasn't able to find any of my files! It showed all weird folders like "HGgjajhzYHjwg" . Luckily, since I wasn't able to flash oos on the other slot, I was able to boot to system on the other one, which booted to evolution x (Now I'm currently booted in slot B). What should I do? (I have seen many threads like this, but haven't found a thread on OnePlus 6). Please Help!!
Click to expand...
Click to collapse
That's actually your internal storage still encrypted, this is a common issue, my recommendation is to try to boot normally after flashing the zips with adb sideload, if your internal storage is still intact then there you go, otherwise reboot to twrp and format internal storage.

Anmol45 said:
Yesterday, I wanted to switch from Evolution X rom to Pixen os on my OnePlus 6. So, I was following the normal procedure .i.e., Flash oos and twrp on both slots, reboot, and then flash pixen. Okay. I successfully flashed oos and twrp on one slot. But, when i rebooted to recovery to flash it again in the other slot, when I went to the "Install" section, I wasn't able to find any of my files! It showed all weird folders like "HGgjajhzYHjwg" . Luckily, since I wasn't able to flash oos on the other slot, I was able to boot to system on the other one, which booted to evolution x (Now I'm currently booted in slot B). What should I do? (I have seen many threads like this, but haven't found a thread on OnePlus 6). Please Help!!
Click to expand...
Click to collapse
Always remove your phone password when changing rom...and always keep backup on your pc or hard drive or somewhere else...and avoid going from one security patch to another... especially when going from new security update to an old one...but mainly remove your password...imo that should help avoiding the data encryption and file corruption

Question Help stuck in bootloop!

Hello! Today i tried Lineage os (came from PPUI) thought it was nice but i wanted to go back for the extra customisation options.
Steps i did: Removed screen locks
Reboot into TWRP recovery
I wiped the Dalvik+ Data+ Cache
Realised my PPUI restore was in the wrong folder and not the TWRP recovery thought i would just reboot and move it to the corect place
Then i got into a bootloop cause i wiped my os. Now phone says storage is encrypted.
Since i have no access to storage i tried to adb sideload the LOS i had in before and then just do a freshly install of PPUI. At 47% it says adb: failed to read command: No Error, (mobile mentions a magisk module missing) Any ideas?

Guns&roses said:
Hello! Today i tried Lineage os (came from PPUI) thought it was nice but i wanted to go back for the extra customisation options.
Steps i did: Removed screen locks
Reboot into TWRP recovery
I wiped the Dalvik+ Data+ Cache
Realised my PPUI restore was in the wrong folder and not the TWRP recovery thought i would just reboot and move it to the corect place
Then i got into a bootloop cause i wiped my os. Now phone says storage is encrypted.
Since i have no access to storage i tried to adb sideload the LOS i had in before and then just do a freshly install of PPUI. At 47% it says adb: failed to read command: No Error, (mobile mentions a magisk module missing) Any ideas?
Click to expand...
Click to collapse
You still should be able to access TWRP recovery? You can format data partition there and be able to use internal storage on your next boot to recovery.

From the looks of things i have formated all my storage data in my panic state. Thoughts on moving the Rom to the phone to be installed by recovery?

So as it looks i have nothing into the phone itself and i cant send files from the pc! How would i go about getting the LOS rom to the mobile and flashing from there?
Tried Adb sideload and i get error Magisk addon.d failed can not find magisk binaries. Do i flash magisk first?
Update: I get the rom in. i Flash the rom in. and im still stuck to the LOS loading screen for atleast 5 mins Thoughts?

Fixed. for some reason it was the LOS flash that had issues. when i tried flashing PPUI it worked the first time no issues

Lineage install at 47% for poco
I use lineage recovery and I didn't encounter any magisk thingy. That sound like a previous os persistence script which shouldn't be loaded in the first place....but still did for unknown reason
However, important to note that other user flashed using twrp without issue
Try these steps
1. Format Data
2. Sideload latest firmware
3. Sideload nightly LineageOS
4. Sideload opengapp arm64 (if you are using)
5. Sideload magisk (if you are using)
Boot

UNBRICKING OP7 PRO

Hello i installed ArrowOS 12 for my OP7 pro, but i figured out that my NFC paymants does not work, so i wanted to go back to stock.
I did everything as said in this thread https://forum.xda-developers.com/t/...boot-roms-for-oneplus-7-pro-7-pro-5g.3931424/ but i cant get it to work. Im getting bootloop after even erasing system data, does anyone has any idea what can i do'?

marcin10217 said:
Hello i installed ArrowOS 12 for my OP7 pro, but i figured out that my NFC paymants does not work, so i wanted to go back to stock.
I did everything as said in this thread https://forum.xda-developers.com/t/...boot-roms-for-oneplus-7-pro-7-pro-5g.3931424/ but i cant get it to work. Im getting bootloop after even erasing system data, does anyone has any idea what can i do'?
Click to expand...
Click to collapse
This sequence has worked for me every time
1. Reboot twrp/lineage recovery, format data. Reboot bootloader
2. Fastboot boot into TWRP FBEv2
3. Sideload official TWRP 3.5.2.9-0 installer (found on TWRP website). Reboot recovery
4. Copy OOS 11.zip to internal storage. Flash OOS 11.zip. Reboot recovery again
5. Format data in OOS stock recovery & Reboot
6. After boot into OOS 11, just local upgrade rom .zip again, you will have OOS on both slots