Dear all,
I've bought this device : http://www.androidtoitaly.com/goods.php?id=923
quite similar to the Ulefone v12 (http://forum.xda-developers.com/showthread.php?p=30360533)
Infact for its similitude to th eUlefone I tried to flash following that guide.... and ... ooohh! nooo!!
Now I've my mobile dead... sigh!
There is someone that is able to help me on the recovery ?
Thanks in advance
usb jig
use usb jig to flash your phone!!!!
mehediatcom said:
use usb jig to flash your phone!!!!
Click to expand...
Click to collapse
Thank you for your reply, i want to add that with Flash tool I'm able to flash the device , but i don't have any rom useful for it
the problem arose because the original was really full of bug and trying to reflash i would to correct .... but ... you all know the results
here on the bottom you can see the back of the smartphone
Please heeeeelp me !
T5 Model MHT865
k-armando said:
So these my news (bad news)
this my phone, seems to be MHT865, it is quite similar to th ULEFONE v12 / Star v12 but these are its specs:
[Tipologia] Android phone candy touch screen
[Brand] T5
[OS] Android 4.0
[RAM] 512M
[CPU] MTK6577 1 Ghz
[Core] Dual core
[ROM] 4G
[Display] Multi-touch capac
[Screen res] 540*960 QHD
[Dual sim] Supported
[USB] microUSB
[Ext memory] 32G Micro SD
GSM 850/900/1800/1900 WCDMA 850/2100
[front camera] 0.3 mp
[back camera] 8.0 mp
[WIFI] Supported
[3G] Supported
[G-sensor] Supported
[Bluetooth] Supported
[GPS] Supported
[Multi-touch] 4
The device is not bad but the software is the worst you ever had in your life (this and the next). For that reason I tried to flash it.
I used SP_Flash_Tool_v3.1222.00. All the steps followed for making the operation went good but ... my phone now is dead :crying:
What are the symptoms ? ... after switch-on there is a frontal led that in sequence turn on Green - Red - Yellow and anything other ...
There is someone that has this device ? and has been able to flash ? or there is someone that has a stock rom for it ?
Thank you
Click to expand...
Click to collapse
T5
forum.china-iphone.ru/tinji-titan2-4-5-960x540-android-4-0-mtk6577-t23345-20.html?hilit=titan2
forum.china-iphone.ru/ihtc-titan-2-t24309.html
hi k-armando, have you solved?
k-armando said:
k-armando said:
So these my news (bad news)
this my phone, seems to be MHT865, it is quite similar to th ULEFONE v12 / Star v12 but these are its specs:
[Tipologia] Android phone candy touch screen
[Brand] T5
[OS] Android 4.0
[RAM] 512M
[CPU] MTK6577 1 Ghz
[Core] Dual core
[ROM] 4G
[Display] Multi-touch capac
[Screen res] 540*960 QHD
[Dual sim] Supported
[USB] microUSB
[Ext memory] 32G Micro SD
GSM 850/900/1800/1900 WCDMA 850/2100
[front camera] 0.3 mp
[back camera] 8.0 mp
[WIFI] Supported
[3G] Supported
[G-sensor] Supported
[Bluetooth] Supported
[GPS] Supported
[Multi-touch] 4
The device is not bad but the software is the worst you ever had in your life (this and the next). For that reason I tried to flash it.
I used SP_Flash_Tool_v3.1222.00. All the steps followed for making the operation went good but ... my phone now is dead :crying:
What are the symptoms ? ... after switch-on there is a frontal led that in sequence turn on Green - Red - Yellow and anything other ...
There is someone that has this device ? and has been able to flash ? or there is someone that has a stock rom for it ?
Thank you
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Hello fellow xda members and developers! Today I want to ask you a question that wasn't asked 'till now. I wonder if the poor performance of the Smart 2 in games and every gpu-related thing (playing flash from internet, videos , etc ) is from the drivers on the rom. You see here : https://www.youtube.com/watch?v=mJuxt_SGv4k the same SOC but with a custom ROM (and surely better drivers) , plus that phone has 290mb of ram , while smart 2 has 512 .
What I want to ask now is this : Is it possible to make a flash-able zip from the gpu drivers of other phones with same GPU for the smart 2 ?(and same OS obviously) .
Hi Developers
I am buy a new phone it's name is Kult Beyond.
----------specifications----------
Phone - Kult Beyond
Ram - 3GB
Rom - 32GB
Screen - 5.2" IPS HD display
Network - 4G/3G/2G
Battery - 3000mAh
Android - Stock Nougat 7.0
Processor - MT6737 64bit Quad-core 1.25 GHz
GPU - Arm Mali-T720 MP1 650 MHz GPU
With Fingerprint scanner
-------------------------------------
I am not a Developer so i dont know about how to create TWRP and custom rom.
please make any MIUI 8 ported Rom and TWRP recovery for my device.
sorry for my English.
I need same for my kult beyound please somebody step up
Requesting the members to develope roms and recovery for my device
Greetings to one and all present here.Kindly develop some recoveries and roms for my device, ie kult beyond
This is sad.Looks like we made a huge mistake by taking this phone and look how lazy xda members are, they can't even a create a custom recovery for a phoneand they call themselves developers
Don't know about xda but we definitely had done wrong by purchasing it. Total bull****. I even got to know that this device won't get any more update for oreo. We will get stuck on 7.0 only
I also have the same phone.Have been using it for the past 10 months.It is a nice phone but It has some software-based bugs which I feel Developers here can fix -
1) Phone going to silent mode randomly
2) I have to switch on and off Airplane mode to make
Outgoing calls work
3) RAM Management is quite poor.Always above 2GB used,so it requires Optimization
4) Battery,even if it says 3000MaH,It acts like a 1000MaH.Lasts about 4 hours of screen-on time.Again,Down to Optimization I think.
I have contacted kULt about this but no fixes seem to be coming...They seem to completely ignore old Products and focussed on Marketing and new budget offerings.
Guide to root kult ambition
HIDDENSLAYER said:
I need same for my kult beyound please somebody step up
Click to expand...
Click to collapse
Can any one please provide a detailed guide on how to root kult ambition and install twrp on it..I would be grateful..
It runs on mtk 6737 chipset and has Android 7.0 os
Hi
Please need stock firmware or TWRP backup to unbrick my H96 Max X3 (4+128 Gb, Android 9 Tv Box, Amlogic S905X3 64-bit quad core ARM® Cortex ™ A55 CPU.
Thanks
medmouncef said:
Hi
Please need stock firmware or TWRP backup to unbrick my H96 Max X3 (4+128 Gb, Android 9 Tv Box, Amlogic S905X3 64-bit quad core ARM® Cortex ™ A55 CPU.
Thanks
Click to expand...
Click to collapse
https://yadi.sk/d/6_wp2VGoumL0VA
This is supposed to be the original firmware (from the russian site 4pda).
Pity ! File downloaded twice but does not pass : "Parse burning image fail". That normally means that file is corrupted or broken somehow. Thanks anyway.
medmouncef said:
Pity ! File downloaded twice but does not pass : "Parse burning image fail". That normally means that file is corrupted or broken somehow. Thanks anyway.
Click to expand...
Click to collapse
Do you use the latest USB Burning Tool? Do you press "start" first and then connect your USBmale-USBmale cable?
Please state how exactly you tried to unbrick your box.
Also you can download the relevant images of Bqeel Y8 max OR HK1 max X3 OR Vontar X3, as all of these boxes are similar/identical to yours.Especially that of Bqeel, if you unpack it, you will see that it has the H96 video
ath156 said:
https://yadi.sk/d/6_wp2VGoumL0VA
This is supposed to be the original firmware (from the russian site 4pda).
Click to expand...
Click to collapse
ath156 said:
Do you use the latest USB Burning Tool? Do you press "start" first and then connect your USBmale-USBmale cable?
Please state how exactly you tried to unbrick your box.
Also you can download the relevant images of Bqeel Y8 max OR HK1 max X3 OR Vontar X3, as all of these boxes are similar/identical to yours.Especially that of Bqeel, if you unpack it, you will see that it has the H96 video
Click to expand...
Click to collapse
USB Burning Tool 2.0.6.2 or 2..2.0 >> Import File : "u215.H96Max_X3_1000M_9.0.2019.12.28.10.31.img" >> "Parse burning image fail" >>
The file is not loaded. and so far I haven't connected anything yet.
HK1 max X3, already tested but I don't like. H96 Max X3 is more better.
The 2 other , I don't know them. I am downloading Bqeel Y8 to test it.
medmouncef said:
USB Burning Tool 2.0.6.2 or 2..2.0 >> Import File : "u215.H96Max_X3_1000M_9.0.2019.12.28.10.31.img" >> "Parse burning image fail" >>
The file is not loaded. and so far I haven't connected anything yet.
HK1 max X3, already tested but I don't like. H96 Max X3 is more better.
The 2 other , I don't know them. I am downloading Bqeel Y8 to test it.
Click to expand...
Click to collapse
I don't know why you have such a problem with the original rom of H96 max X3. I just tried it with my installed UBT version 2.1.7.3 and it loads all the way and I press then "start".No error.Of course I didn't try to flash my box, since I received it only today (version 4/32).
Are you unzipping correctly the 7z file (by 7z or winrar??).
---------- Post added at 11:37 PM ---------- Previous post was at 11:23 PM ----------
I think you are using an older version of USB Burning Tool???
ath156 said:
I don't know why you have such a problem with the original rom of H96 max X3. I just tried it with my installed UBT version 2.1.7.3 and it loads all the way and I press then "start".No error.Of course I didn't try to flash my box, since I received it only today (version 4/32).
Are you unzipping correctly the 7z file (by 7z or winrar??).
---------- Post added at 11:37 PM ---------- Previous post was at 11:23 PM ----------
I think you are using an older version of USB Burning Tool???
Click to expand...
Click to collapse
I just installed the Bqeel Y8 max firmware. The flash went very well and this image is perfectly identical to H96 Max X3 one. Thank you.
As for the original firmware, I will redo everything to try to find out where the problem comes from.
I will take your advice into consideration and I will keep you posted.
medmouncef said:
I just installed the Bqeel Y8 max firmware. The flash went very well and this image is perfectly identical to H96 Max X3 one. Thank you.
As for the original firmware, I will redo everything to try to find out where the problem comes from.
I will take your advice into consideration and I will keep you posted.
Click to expand...
Click to collapse
Nice
ath156 said:
Nice
Click to expand...
Click to collapse
The problem came from winrar. I just decompressed with 7z and the message no longer appears using the version USB_BURNING_TOOL V2.2.0.
medmouncef said:
The problem came from winrar. I just decompressed with 7z and the message no longer appears using the version USB_BURNING_TOOL V2.2.0.
Click to expand...
Click to collapse
ath156, Thank you very much ... For sharing the link, for your help, and for how quickly you did it all.
Original image was installed, smoothly, with the software default options and by checking Key(Overwrite)mac.
If some gets Android TV (atv) rom on this box , please share
nishant6577 said:
If some gets Android TV (atv) rom on this box , please share
Click to expand...
Click to collapse
https://mega.nz/#!chdkXIbR!FI35ZvxllR4NfDYvA7U0hCEEgW7lsVYTuUZEUMpBO2E
This must be a Vietnamese ATV custom rom.I have not tried it because usually I dont prefer ATV.You can try it and tell us about it.
ath156 said:
https://mega.nz/#!chdkXIbR!FI35ZvxllR4NfDYvA7U0hCEEgW7lsVYTuUZEUMpBO2E
This must be a Vietnamese ATV custom rom.I have not tried it because usually I dont prefer ATV.You can try it and tell us about it.
Click to expand...
Click to collapse
What are the cons of using a atv build when conpared to android build
so you installed that file downloaded from yandex , is the firmware true orginal and can be flashed on h96 max x3 s905x3 ?
are you on telegram where we can personally converse regarding this matter ?
i currently m on hk1 x3 firmware , is the stock better ?
I have H96 Max X3 for only 4 days and I am still using the original firmware but I was following the relevant forums from the firtst time I ordered my box.
So as I already stated you can use either of the firmwares for H96 Max X3 or HK1 X3 or Vontar X3.
But you asked for an ATV firmware and the one I linked above is the only custom ATV firmware I am aware of at the moment.The link is from a Russian site although the custom rom is Vietnamese.
I will stick with the original rom until a custom rom (not ATV) will be available.At the original rom I have almost everything, since I installed 2 apps for notification and navigation bars (which were the main problems for me).Also of course I use another launcher.
ath156 said:
I have H96 Max X3 for only 4 days and I am still using the original firmware but I was following the relevant forums from the firtst time I ordered my box.
So as I already stated you can use either of the firmwares for H96 Max X3 or HK1 X3 or Vontar X3.
But you asked for an ATV firmware and the one I linked above is the only custom ATV firmware I am aware of at the moment.The link is from a Russian site although the custom rom is Vietnamese.
I will stick with the original rom until a custom rom (not ATV) will be available.At the original rom I have almost everything, since I installed 2 apps for notification and navigation bars (which were the main problems for me).Also of course I use another launcher.
Click to expand...
Click to collapse
i installed the said atv firmware been using for 4 hours , it is smooth , the said firmware is based on stock firmware i think , i wanted to use atv build because of remote functionality , i can now use my phone for voice search and keyboard , also because android tv playstore is better because it has android tv specific apps and can be used with remote , also the ram consumption is less , by default only 800mb is used out of 4 gb , i see no major benefit in using regular android over atv ,
nishant6577 said:
i installed the said atv firmware been using for 4 hours , it is smooth , the said firmware is based on stock firmware i think , i wanted to use atv build because of remote functionality , i can now use my phone for voice search and keyboard , also because android tv playstore is better because it has android tv specific apps and can be used with remote , also the ram consumption is less , by default only 800mb is used out of 4 gb , i see no major benefit in using regular android over atv ,
Click to expand...
Click to collapse
I am happy that you liked the ATV custom rom that I gave you the link for.
I know that some people like ATV roms and others (like me) regural android. Thats why many custom roms are made in 2 formats. As in everything there are advantages/disavantages in each case.
It is good that you said your experience with this rom as it may be usefull for other users that want ATV.
thank you...... works perfectly for me
ath156 said:
I have H96 Max X3 for only 4 days and I am still using the original firmware but I was following the relevant forums from the firtst time I ordered my box.
So as I already stated you can use either of the firmwares for H96 Max X3 or HK1 X3 or Vontar X3.
But you asked for an ATV firmware and the one I linked above is the only custom ATV firmware I am aware of at the moment.The link is from a Russian site although the custom rom is Vietnamese.
I will stick with the original rom until a custom rom (not ATV) will be available.At the original rom I have almost everything, since I installed 2 apps for notification and navigation bars (which were the main problems for me).Also of course I use another launcher.
Click to expand...
Click to collapse
hello can i have the apps to activate the notification and navigation bars on my A95X F3 AIR (S905X3 4Gb) ; or maybe a ROM for it plz
mouradho said:
hello can i have the apps to activate the notification and navigation bars on my A95X F3 AIR (S905X3 4Gb) ; or maybe a ROM for it plz
Click to expand...
Click to collapse
For notification use Power Shade (you must give All permissions required - sometimes one by one).
For navigation use Taskbar PC style where again you must give all permissionw required. It is not only a navigation bar but much more if you like. The minimum you have to do is to select all 3 buttons and if you want there are more (it may be like another launcher, status bar, you can hide it or not etc).
Hi Ally,
Hopee everyone is great ? (please ,mind my spellings due to the tremors in my fingers and body but just put 2 and 2 together...hahahha)..
I have Xiaoli MI MAX 2, androud 7.1 (i think let me check)... Android 7.1.1, miui global stable, 4gb ram, 64 gb rrom (internal memory)...
The troublwis i am trying toconnect a webcam, myn SD card, MY TF card but it dont show on on my phone ?......is there ant sellings i need to change ???? or what am i doing wrong ????
I thank you all and kind regards....
Aly