I am going through this: https://forum.xda-developers.com/t/rom-13-op7pro-crdroid-v9-2-12-03-2023.4511589/
I have installed the stock OOS, but when instructed to use the crDroid 9.2 recovery, I am wanting to replace this with TWRP. Do I need to go through the ADB sideload process and setup crDroid 9.2 and then go back and boot the TWRP image from fastboot? At this point, I am not able to boot the TWRP image via fastboot boot twrp[version 3.7 something here).img. The image loads and the command completes, but the phone gets stock on the OnePlus fastboot splash logo.
My experience with Resurrection Remix is that I always had to flash TWRP from within TWRP immediately after flashing the ROM or I would be unable later boot the TWRP boot image from fastboot. I really don't yet know the technical details of the relationship between the system/ROM and being able to boot the TWRP boot image. Either way, TWRP is too useful to not have, so using crDroid without TWRP is a non-starter for me.
Once I get TWRP recovery on here, can I install crDroid.zip from TWRP, or does it always need to be ADB sideloaded?
Thank you!
have u managed to install TWRP?
im in the same with pixel experience. i want TWRP to be my recovery but the image used gets me the oneplus logo had o flash the pixel experience recovery again.
Related
So, i have used my whole saturday on unlocking the booloader which was the easiest and quickest and then trying to root, but that has failed every time. I first flashed the stock firmware zip 9.0.2 then I go back I dont reboot and flash the twrp and magisk zip and then it wont boot up,
when I try rebooting after flashing the firmware back to the system it sends me to the firmware,
when I try flashing a new firmware and then boot into fastboot then twrp and flash magisk it wont boot up,
and when I do the same only with twrp it wont neither.
I have tried sevel magisk versions, 17.1,17.2,17.3 none of them worked
as for the twrp blu spark or the one from the twrp website, i was always able to boot into twrp but not really to flash it as that would end in a twrp loop
can PLEASE anyone, someone, with a good heart and patience help me ? im really loosing my ****s over this
:fingers-crossed::fingers-crossed:
Try booting into blu_spark twrp
Installing blu_spark twrp
Rebooting to blu_spark twrp
Install magisk 17.3 or 17.1 (I am using 17.3 because it it beta but less stable.)
Faaris Ansari said:
Try booting into blu_spark twrp
Installing blu_spark twrp
Rebooting to blu_spark twrp
Install magisk 17.3 or 17.1 (I am using 17.3 because it it beta but less stable.)
Click to expand...
Click to collapse
can you provide me with the files ? plus
does it make a difference if I take these twrps compared to the one im using from their website ? because I dont see how this can be the fault ?
galaxyss8 said:
can you provide me with the files ? plus
does it make a difference if I take these twrps compared to the one im using from their website ? because I dont see how this can be the fault ?
Click to expand...
Click to collapse
The normal twrp is known to be buggy on the OnePlus 6 since there was encryption and stuff. Here is the blu_spark twrp IMG to boot:
https://forum.xda-developers.com/devdb/project/dl/?id=30485
And here you need to flash the blu_spark twrp: https://forum.xda-developers.com/devdb/project/dl/?id=30484
Flash that then reboot into recovery again
Then flash magisk
If this doesn't work for you I think there is another way.
Faaris Ansari said:
The normal twrp is known to be buggy on the OnePlus 6 since there was encryption and stuff. Here is the blu_spark twrp IMG to boot:
https://forum.xda-developers.com/devdb/project/dl/?id=30485
And here you need to flash the blu_spark twrp: https://forum.xda-developers.com/devdb/project/dl/?id=30484
Flash that then reboot into recovery again
Then flash magisk
If this doesn't work for you I think there is another way.
Click to expand...
Click to collapse
ive done that now and im waiting again in the; the boot loader is unlocked and software integrety.. winodw
im waiting now for some minutes, i flashed the blu spark zip pressed back went to reboot pressed on reboot to recovery and flashed magisk and then reboot to system, thats where i am now
galaxyss8 said:
ive done that now and im waiting again in the; the boot loader is unlocked and software integrety.. winodw
im waiting now for some minutes, i flashed the blu spark zip pressed back went to reboot pressed on reboot to recovery and flashed magisk and then reboot to system, thats where i am now
Click to expand...
Click to collapse
You might be on the wrong slot. DO you even have a system to boot to? Not sure why you even tyred flashing the 9.0.2 ROM. If I was you I would start over. Use the fastboot ROM to get a clean wiped system booting. After that
fastboot boot bluespark twrp v86. Img
Flash bluespark twrp v86. Zip
Reboot revovery
Flash magisk 17.1
yldlj said:
You might be on the wrong slot. DO you even have a system to boot to? Not sure why you even tyred flashing the 9.0.2 ROM. If I was you I would start over. Use the fastboot ROM to get a clean wiped system booting. After that
fastboot boot bluespark twrp v86. Img
Flash bluespark twrp v86. Zip
Reboot revovery
Flash magisk 17.1
Click to expand...
Click to collapse
I flashed the rom because my phone didn't boot up anymore after either flashing TWRP or magisk.
Why should I use the fastboot room, what is the benefit if I use it.
Is the reboot to recovery necessary ? I feel like that part is actually not working properly ?
galaxyss8 said:
I flashed the rom because my phone didn't boot up anymore after either flashing TWRP or magisk.
Why should I use the fastboot room, what is the benefit if I use it.
Is the reboot to recovery necessary ? I feel like that part is actually not working properly ?
Click to expand...
Click to collapse
Yes the reboot to recovery is the most nessesary part of it as it will change slots.
You can try boot to recovery
Flash oos full rom
Flash bluespark twrp. Zip
Reboot recovery
Flash full ROM again
Flash bluespark twrp. Zip again.
Reboot recovery
Flash magisk.
yldlj said:
Yes the reboot to recovery is the most nessesary part of it as it will change slots.
You can try boot to recovery
Flash oos full rom
Flash bluespark twrp. Zip
Reboot recovery
Flash full ROM again
Flash bluespark twrp. Zip again.
Reboot recovery
Flash magisk.
Click to expand...
Click to collapse
Can you explain how to properly boot back into recovery?
Previously I either just went on the back button and flashed the other Zip's or I went back to the reboot overview and pressed recovery there but that also did not seem to work properly I think.
galaxyss8 said:
Can you explain how to properly boot back into recovery?
Previously I either just went on the back button and flashed the other Zip's or I went back to the reboot overview and pressed recovery there but that also did not seem to work properly I think.
Click to expand...
Click to collapse
Just press back button in Recovery/ reboot / choose recovery.
I unlocked the bootloader through mi unlock tool. I flashed official twrp from their site, 3.3.1-0-violet.img but when I tried booting it into recovery, it got stuck at twrp logo. Then I learnt that it's necessary to wipe userdata using fastboot first so I did that. Then, when twrp started, it was unable to install/wipe/mount any partition. Tried installing magisk using sideload, did work but then device stopped booting.
Figured out a way on how to fix the mount issue, twrp working fine, but then I accidentally wiped /system. Now my device only opens in fastboot, even though I've tried installing, erasing and reinstalling that twrp recovery as well as a couple of others I found in pixel experience forums for my device.
I've got all the stuff needed to install pixel experience, fcrypto disabler, xiaomi latest firmware and the rom itself. Can anyone guide me on how to install it using fastboot?
Also whenever I try booting the recovery image straight from fastboot, it says that command failed, too many links.
I can't boot into recovery via vol up + power button, fastboot doesn't recognize command fastboot reboot recovery.
you need to install stock rom ,then flash twrp but newer unofficial twrp and orangefox twrp boots into recovery even if system partition is empty.
try installing unofficial twrp or orangefox.
orangefox is recommended .
Hi all,
I just updated to 10.3 on my 7 pro plus. I know I really don't need twrp I do have the stock recovery but I like twrp. If I go thru the adb route, booting into twrp img and installing twrp zip, will it install into both slots? And will I lose root? Thanks for any help.
I'm not sure on the answer to your question but I used this guide to update and I didn't lose twrp.
https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-bootloader-unlock-twrp-install-t3940368
Boot img, flash zip, flash magisk. Should give you twrp and keep root.
Thanks all. I just bit the bullet and tried flashing twrp.img from the twrp site to install the twrp.zip but the screen just stayed on fastboot so I rebooted into normal then attempted again with mauronofrio img and zips. ( Then I had to Magisk after I rebooted recovery.) It's all good. I hope this helps someone else as well.
Hello,
i have a question about getting into Recovery or maybe i have to install it again?
So i installed twrp following this guide
Install LineageOS on walleye | LineageOS Wiki
wiki.lineageos.org
At first i installed the Lineage OS recovery but wasnt able to flash a ROM with that so i switched and installed twrp.
It was installed to slot A.
I then went ahead and installed an ASOP ROM.
Now the ROM is working fine and i wanted to go into TWRP and do a Backup.
However i cant get into TWRP. Not with key combos nor with adb reboot recovery.
All i get is the fallen Android Robot picture.
I guess i wrote the image to Slot A as well and now have no recovery left.
Do i have to flash TWRP again and this time to Slot B?
I dont wanna brick anything by accident as i have seen some posts where people switched Slots and got bricks / semi bricks.
Thanks for any help or clarification.
Kind Regards
Hello mate, i never reinstalled twrp on my pixel 2 after catching a bootloop after installing it and then flashing magisk so stuck with using fastboot to fastboot boot twrp when I wanted to flash a ROM/mod.
Sounds strange that twrp was only on 1 slot as the twrp installer zip should flash both slots when flashed?
With regard to losing twrp you'll probably find that the new ROMs recovery has overwritten your twrp recovery during the flashing process giving you a stock recovery again (Fallen android). When I was using a 6T which is an A/B slot device you always had to reflash the twrp installer after a ROM flash to keep twrp installed.
I'd check the official twrp thread re backing up with twrp as it did have problems either backing up or restoring last I used it.
Hope that's some help.
My phone is stuck in boot loader mode. I tried to install a custom rom and flashed everything but i got an error while installing it and it came out of twrp recovery and noe it is stuck and is not switching on. Please help
https://forum.xda-developers.com/t/...4-0-58-international-oxygen-os-9-0-2.3903272/
Use that if your phone is international model if not look around for the t-mobile msm tool. More details, more help. What exactly did you flash, how did you flash it, what recovery did you use....
flash713 said:
https://forum.xda-developers.com/t/...4-0-58-international-oxygen-os-9-0-2.3903272/
Use that if your phone is international model if not look around for the t-mobile msm tool. More details, more help. What exactly did you flash, how did you flash it, what recovery did you use....
Click to expand...
Click to collapse
I was trying to install evolution x rom after wiping the data we should flash the os to install custom rom right so i flashed the os and while installing some error occured it came back to bootloadr mode and is stuck. I was using twrp recovery.I saw a youtube video and was doing everything
please tell me what to do
[GUIDE] Mega Unbrick Guide for A Hard Bricked OnePlus 6
Similar to the previous threads for OnePlus 5 or OnePlus 5T, here are the necessary packages to unbrick/revive a hard bricked OnePlus 6. Download: https://www.androidfilehost.com/?w=files&flid=271466 OnePlus 6_180513_氢OS线刷包.rar After using it...
forum.xda-developers.com
How to flash a rom on oneplus 6.
Boot twrp: fastboot boot twrpxxxxx.img
Fash firmware OOS 10.3.9 or whatever latest is for your device. Get from repo on guides section here or from oxygen updater app. Make sure it's for your device. Don't flash global OOS on tmobile model...After flashing OOS latest, flash EvoX rom, flash twrp installer zip, flash finalize zip, reboot recovery, flash magisk latest. I use canary, format data-swipe to confirm in twrp, reboot system.
That's how you flash a rom on oneplus 6. Finalize is a script that can be found with simple search here on xda that copies firmware to both slots so you don't have to reboot recovery and flash OOS again. I used a Oneplus 6t a year prior to what I use now Pixel4XL and I flashed everything known to mankind available for it just this way.
Boot twrp,
Flash OOS,
Flash EvoX,
Flash twrp installer zip,
Flash finalize zip,
Reboot recovery,
Flash magisk
Format data-swipe to confirm yes,
Reboot system.
Update magisk once booted via magisk manager app icon in app drawer.
You should be able to hold down power+volume up and get in to bootloader node again and do this. Just keep holding them down till you see the "start" screen and let go, boot twrp from fastboot...