Related
Start up failed:
Your device didn't start up successfully use the software rapair assistant on computer to repair your device.
Connect your device yo your comouter yo get the software repair assistant.
Ya lo intente pero no puedo hacer nada :crying:
We need more info.. what did you do? Which device do you have? Have you unlocked your bootloader?
Hello guys,
I did a procedure to install a TWRP on my phone and it will not let me start correctly. (reason: decrypt the cell phone).
When it turns on it just vibrates (does not turn on the screen), it takes about 5 seconds and vibrates again, as if looped.
I already removed the battery, I left it disconnected and nothing, I left it connected in the USB to see if at some point it would solve by itself and nothing too.
I wanted to reinstall the recovery, so I could, but even if I forced to enter the fastboot it will, (even with the screen "off" forced the input and the pc did not recognize)
I'm sad because I "lost" my cell phone, but I know there is some way to revive it, if only I could get into the fastboot I can solve.
Ola pessoal,
Eu fiz um procedimento para instalar um TWRP no meu celular e ele não me permitirá iniciar corretamente. (razão: descriptografar o celular).
Quando acende, apenas vibra (não liga a tela), leva cerca de 5 segundos e vibra novamente, como se estivesse em loop.
Já tirei a bateria, deixei desconectada e nada, deixei ela ligada no USB para ver se em algum momento resolveria por si só e nada também.
Eu queria reinstalar a recuperação, então eu poderia, mas mesmo se eu forçado a entrar no fastboot ele vai, (mesmo com a tela "off" forçou a entrada e o pc não reconheceu)
Estou triste porque eu "perdi" meu celular, mas eu sei que há alguma maneira de reviver isso, se eu pudesse entrar no fastboot eu posso resolver.
How did you remove battery??
---------- Post added at 23:05 ---------- Previous post was at 23:02 ----------
Anyways
You still can just boot into your fastboot. You can't see it but if you manage to blindly boot into it, you'll see it in "fastboot devices". At least i had exactly same issue once and this fixed it. Just flash official ROM via MiFlash if you'll get to fastboot.
opening
someone to help ?
Use this MiFlash application
the cell phone does not go into fastboot mode, I had found a way to make it go into fasboot mode by "making" a DIY cable, but so far I have not gotten such a procedure
http://en.miui.com/thread-310325-1-1.html
close topic pls
I had the same problem, my brick phone totally black, it restarted continuously with vibration but was not recognized by the PC. After numerous tools and time I found motherboard and replaced. By mistake I flashed a wrong boot image and the phone died.
exactly what happened to me, I put the twrp of mi 5 that there was possibility of decrypting miui 10 pro root to run 100%
no miui 9 did not have this "clowning"
XiaoMiFlash
brenoleoni said:
Hello guys,
I did a procedure to install a TWRP on my phone and it will not let me start correctly. (reason: decrypt the cell phone).
When it turns on it just vibrates (does not turn on the screen), it takes about 5 seconds and vibrates again, as if looped.
I already removed the battery, I left it disconnected and nothing, I left it connected in the USB to see if at some point it would solve by itself and nothing too.
I wanted to reinstall the recovery, so I could, but even if I forced to enter the fastboot it will, (even with the screen "off" forced the input and the pc did not recognize)
I'm sad because I "lost" my cell phone, but I know there is some way to revive it, if only I could get into the fastboot I can solve.
Ola pessoal,
Eu fiz um procedimento para instalar um TWRP no meu celular e ele não me permitirá iniciar corretamente. (razão: descriptografar o celular).
Quando acende, apenas vibra (não liga a tela), leva cerca de 5 segundos e vibra novamente, como se estivesse em loop.
Já tirei a bateria, deixei desconectada e nada, deixei ela ligada no USB para ver se em algum momento resolveria por si só e nada também.
Eu queria reinstalar a recuperação, então eu poderia, mas mesmo se eu forçado a entrar no fastboot ele vai, (mesmo com a tela "off" forçou a entrada e o pc não reconheceu)
Estou triste porque eu "perdi" meu celular, mas eu sei que há alguma maneira de reviver isso, se eu pudesse entrar no fastboot eu posso resolver.
Click to expand...
Click to collapse
Please remove the battery and reinstall the battery then go to fastboot mode
folow these steps
the only way you flash your phone is by installing mtk (mediatek) drivers.
if you are using windows 10. Disable Driver Signature Enforcement
download MRT_V3.26
there you have MTK_driver.exe install it. than open folder MTK_CDC_Driver_for_imei right click on Android_Gadget_CDC_driver and install.
download Xiaomi_Flash_20181115.zip
and stable global fastboot rom V10.3.3.0.OCGMIXM
extract it
run mi flash and choose extracted folder, click refresh than flash.
THIS IS 100% TESTED by me.
Vibrating and cannot reboot
I have return my phone to service center because still under warranty after get exactly same problem with yours. They claim motherbord is broken and replace without any charge....
Use
SP_Flashtools_Windo_v5.1812_authID
Rom Fastboot
steps 1
Open SP_Flashtools_Windo_v5.1812_authID
klik download
login mi acount , not auth no problem
vibrate gone
tested by me working
sabanaman said:
Use
SP_Flashtools_Windo_v5.1812_authID
Rom Fastboot
steps 1
Open SP_Flashtools_Windo_v5.1812_authID
klik download
login mi acount , not auth no problem
vibrate gone
tested by me working
Click to expand...
Click to collapse
im sorry, can you give more specific instructions, im a noob in this matters.
blocked my redmi6 ,just vibrates continuialy after Lineage16 Rom flash attemp.
thanks
sabanaman said:
Use
SP_Flashtools_Windo_v5.1812_authID
Rom Fastboot
steps 1
Open SP_Flashtools_Windo_v5.1812_authID
klik download
login mi acount , not auth no problem
vibrate gone
tested by me working
Click to expand...
Click to collapse
can you upload this "SP_Flashtools_Windo_v5.1812_authID" ?
i click download but software say need auth
thanks
Hi. I am exactly problem. Even today I will try this:
youtube.com/watch?v=EekdWcG8Xqo
youtube.com/watch?v=bDGwHWEJqLk
Olá. Estou com exatamente o mesmo problema, ainda hoje tentarei fazer como nesses vídeos ( de preferência espero não ter que formatar kkkk, saco por ter que instalar uma Máquina Virtual com lixo, isto é, windowns, só pra isso kkkk)
Ps. Como você fala português podemos trocar email (desnecessário diser que wpp está temporariamente inacessível para mim kkk) [email protected]
same problem how did you solve this problem can you help me plz
Spflashtool+mct mtk
olá a todos, resolvi o problema com Box, um conhecido de um estado vizinho possue a medusabox e nela ele conseguiu desbrickar o aparelho, porém qualquer nova mudança no bootloader ele bricka novamente
<Moderator Edit>
English only on xda please!
Translation added:
Well I tried to hard reset an Android device exactly the NOKIA 2.2 TA 1179 model launched in my country Colombia in the same year 2019 second semester. but it does not work.
I have tried with volume + and power and it only reboots and reboots the device
with volume- and power and the device enters fastboot mode
with both volume and power and it only vibrates but neither turns on nor shows the green recovery android
I really don't know what other methods to try is a device that has the volume + keys and less than the power and google asistant
I would be very grateful to you people of XDA DEVELOPERS if you could start adding content of this cell phone to your page since it does not appear in the list of devices that have
and if you could help me with how to make it hard reset or flash it since I already tried with OSTLA, SP, MAGICBOX THUNDER. and none of those methods allowed me to do anything on the phone except that in any video the model TA1179 comes out
What's more is ALMOST IMPOSSIBLE TO FIND THE STOCK ROM OF THIS DEVICE
I ASK YOU FOR HELP PLEASE !!!!!!
Bueno he intentado hacerle un hard reset a un dispositivo android exactamente el modelo NOKIA 2.2 TA 1179 lanzado en mi pais colombia en este mismo año 2019 segundo semestre. pero no funciona.
he tratado con volumen+ y power y solo se reinicia y se reinicia el dispositivo
con volumen- y power y el dispositivo entra en modo fastboot
con las dos de volumen y power y solo vibra pero ni enciende ni muestra el androide verde recovery
la verdad no se que otros metodos tratar es un dispositivo que cuenta con las teclas de volumen + y menos ademas de la de encendido (power) y la de google asistant
les agradeceria mucho a ustedes gente de XDA DEVELOPERS si pudieran comenzar a agregar contenido de este celular en su pagina ya que hasta el momento no sale en la lista de dispositivos que tienen
y si me pudieran ayudar con la forma de hacerle hard reset o flashearlo ya que ya intente con OSTLA, SP, MAGICBOX THUNDER. y ninun metodo de esos me permitio hacerle nada al telefono fuera de que en ningun video sale el modelo TA1179
es mas es CASI IMPOSIBLE HALLAR LA STOCK ROM DE ESTE DISPOSITIVO
LES PIDO AYUDA POR FAVOR!!!!!!
Nokia 2.2
To get into recovery mode you have to do the power button and volume while adding USB to computer.
As for hard reset just do.it through settings if you can get into phone or through fastboot which is power and volume up and down altogether for a few seconds....
I have the same problem and it still hasn't worked for me, keep entering => Fastboot mode ...
Nokia 2.2 Hard Reset
alxzld said:
<Moderator Edit>
English only on xda please!
Translation added:
Well I tried to hard reset an Android device exactly the NOKIA 2.2 TA 1179 model launched in my country Colombia in the same year 2019 second semester. but it does not work.
I have tried with volume + and power and it only reboots and reboots the device
with volume- and power and the device enters fastboot mode
with both volume and power and it only vibrates but neither turns on nor shows the green recovery android
I really don't know what other methods to try is a device that has the volume + keys and less than the power and google asistant
I would be very grateful to you people of XDA DEVELOPERS if you could start adding content of this cell phone to your page since it does not appear in the list of devices that have
and if you could help me with how to make it hard reset or flash it since I already tried with OSTLA, SP, MAGICBOX THUNDER. and none of those methods allowed me to do anything on the phone except that in any video the model TA1179 comes out
What's more is ALMOST IMPOSSIBLE TO FIND THE STOCK ROM OF THIS DEVICE
I ASK YOU FOR HELP PLEASE !!!!!!
Bueno he intentado hacerle un hard reset a un dispositivo android exactamente el modelo NOKIA 2.2 TA 1179 lanzado en mi pais colombia en este mismo año 2019 segundo semestre. pero no funciona.
he tratado con volumen+ y power y solo se reinicia y se reinicia el dispositivo
con volumen- y power y el dispositivo entra en modo fastboot
con las dos de volumen y power y solo vibra pero ni enciende ni muestra el androide verde recovery
la verdad no se que otros metodos tratar es un dispositivo que cuenta con las teclas de volumen + y menos ademas de la de encendido (power) y la de google asistant
les agradeceria mucho a ustedes gente de XDA DEVELOPERS si pudieran comenzar a agregar contenido de este celular en su pagina ya que hasta el momento no sale en la lista de dispositivos que tienen
y si me pudieran ayudar con la forma de hacerle hard reset o flashearlo ya que ya intente con OSTLA, SP, MAGICBOX THUNDER. y ninun metodo de esos me permitio hacerle nada al telefono fuera de que en ningun video sale el modelo TA1179
es mas es CASI IMPOSIBLE HALLAR LA STOCK ROM DE ESTE DISPOSITIVO
LES PIDO AYUDA POR FAVOR!!!!!!
Click to expand...
Click to collapse
make sure usb debuging is on then plug ur device and type the following adb command: adb reboot recovery thn press enter and your in recovery mode
After looking around the internet for HOURS, and using @Androidian_1's info, this worked for me on a Nokia 2.2 with Android One:
-Boot into fastboot mode by:
1. Turn off
2. Press ON button and VOLUME DOWN at the same time
3. It will boot into a mostly black screen that says "FASTBOOT" at the bottom-left corner
- Connect to the PC and use fastboot app to reboot into recovery mode (green robot)
1. Get the Platform Tools for Android, which include fastboot: developer.android.com/studio/releases/platform-tools.html
2. Connect the device via USB (you should hear Windows chime when connected)
3. Test connectivity with: fastboot getvar version
4. Reboot into recovery with: fastboot reboot recovery
- Go into the recovery menu and run factory reset:
1. After the phone has booted into recovery mode it will show the green android robot with a warning
2. Press: SHORT/QUICK >>> POWER + VOLUME UP
3. You should see the recovery menu
4. Use VOLUME DOWN to select "Wipe data/factory reset"
5. Click POWER to select and accept
6. Reboot the phone (click POWER which selects 1st option for "Reboot now"
Hope this helps others!!
foobar1123321 said:
After looking around the internet for HOURS, and using @Androidian_1's info, this worked for me on a Nokia 2.2 with Android One:
-Boot into fastboot mode by:
1. Turn off
2. Press ON button and VOLUME DOWN at the same time
3. It will boot into a mostly black screen that says "FASTBOOT" at the bottom-left corner
- Connect to the PC and use fastboot app to reboot into recovery mode (green robot)
1. Get the Platform Tools for Android, which include fastboot: developer.android.com/studio/releases/platform-tools.html
2. Connect the device via USB (you should hear Windows chime when connected)
3. Test connectivity with: fastboot getvar version
4. Reboot into recovery with: fastboot reboot recovery
- Go into the recovery menu and run factory reset:
1. After the phone has booted into recovery mode it will show the green android robot with a warning
2. Press: SHORT/QUICK >>> POWER + VOLUME UP
3. You should see the recovery menu
4. Use VOLUME DOWN to select "Wipe data/factory reset"
5. Click POWER to select and accept
6. Reboot the phone (click POWER which selects 1st option for "Reboot now"
Hope this helps others!!
Click to expand...
Click to collapse
My computer cant recognize my nokia 2.2 . How did you install fastboot driver for nokia 2.2 ?
The way mine works is from power+voldown fastboot mode I can type: fastboot reboot recovery and once on that no command screen, just PRESSING power+volup gets into recovery.
conditae said:
The way mine works is from power+voldown fastboot mode I can type: fastboot reboot recovery and once on that no command screen, just PRESSING power+volup gets into recovery.
Click to expand...
Click to collapse
I swear that i knew it.
It is simple to go to Fastboot or recovery mode.
When i turn my phone to Fastboot and connect to my PC, Fastboot cant recognize it. I type fastboot device but there is no device . It is my problem
I installed my nokia 2.2 fastboot driver and my system accept that but fastboot cant recognize it.
Can you help me ?
Esemtix2003 said:
I swear that i knew it.
It is simple to go to Fastboot or recovery mode.
When i turn my phone to Fastboot and connect to my PC, Fastboot cant recognize it. I type fastboot device but there is no device . It is my problem
I installed my nokia 2.2 fastboot driver and my system accept that but fastboot cant recognize it.
Can you help me ?
Click to expand...
Click to collapse
Sorry for late reply, I'm retarded. There's a Telegram group, don't think I can link in here. It COULD be the driver, or Windows PC is just b0rked with config... even some new Xiaomi phone can't load driver on a newer machine, swamped (it does, but fastboot can't flash, nor MiFlash; strange things CAN happen). Also, it could be important to get the right driver, ugh. If I dig up a link, I'll try to edit here (but pls don't hold your breath, mental issues for real (not), LOL)
Hello my friends;
i tried to root my infinix zero 8 with magisk ; i unlocked the phone and i patched the boot.img but the phone now give orange state ''your device is unlocked and not trusted'' and the phone keep rebooting
i tried to flash the boot.img via SP flash tools but my PC now cant detect the phone because of the continuous rebooting.
i tried to use the volume up +power button but this fail too.
i can't get to fastboot to flash the phone..
please i'm deseperate and i really need your help.
Just flash your stock ROM and stock recovery back, you should always do a backup before attempting to flash anything.
XDHx86 said:
Just flash your stock ROM and stock recovery back, you should always do a backup before attempting to flash anything.
Click to expand...
Click to collapse
How can i flash it without PC !!!!
Turn off the device then press volume up while connecting the device to your PC. It should boot to fastboot, if it doesn't then it's most probably that you flashed the wrong boot image or didn't follow whichever guide you were following precisely.
If that's is the case then you can follow this guide to solve your bootloop.
Briefly:
Turn off your phone for at least 10 mins.
Restart your phone into recovery either by volume down - power button combination or volume down usb connection combination.
Select wipe data/factory reset.
If you have custom recovery then try wiping dalvik cache before wiping all data.
Wiping data doesn't remove your custom ROM nor remove your custom recovery. But it will remove root.
Never panic while doing anything to your device. There is always a solution to whichever problem you may face.
Lastly should you find it difficult to do anything of the above mentioned then take your device to a service center.
XDHx86 said:
Turn off the device then press volume up while connecting the device to your PC. It should boot to fastboot, if it doesn't then it's most probably that you flashed the wrong boot image or didn't follow whichever guide you were following precisely.
If that's is the case then you can follow this guide to solve your bootloop.
Briefly:
Turn off your phone for at least 10 mins.
Restart your phone into recovery either by volume down - power button combination or volume down usb connection combination.
Select wipe data/factory reset.
If you have custom recovery then try wiping dalvik cache before wiping all data.
Wiping data doesn't remove your custom ROM nor remove your custom recovery. But it will remove root.
Never panic while doing anything to your device. There is always a solution to whichever problem you may face.
Lastly should you find it difficult to do anything of the above mentioned then take your device to a service center.
Click to expand...
Click to collapse
Thank you for your answer, but the problem that i can't turn off the phone even when i use button combination; it's always rebooting until it get discharged
Do you have any other way to get to the recovery page or to stop this rebooting !
You can follow this thread.
One of the posts there says:
Hold Vol down and power for soft reboot. As soon as the screen goes off to reboot quickly switch to recovery combo (bixby + up + power) it should boot to recovery
Click to expand...
Click to collapse
Your recovery combination should be volume up + power.
Another says:
I managed to fix my phone. After leaving it for 24 hours the battery was fully drained. After charging again i could boot to twrp and restore my nandroid backup.
Click to expand...
Click to collapse
Here you can also drain the phone and leave it, then press volume up while connecting the usb.
Either of them should work with your situation, as they both have the same circumstances as yours.
The main point of what I just said, is to either get your phone to soft reboot or completely drain the phone from charge and try booting to recovery again.
XDHx86 said:
You can follow this thread.
One of the posts there says:
Your recovery combination should be volume up + power.
Another says:
Here you can also drain the phone and leave it, then press volume up while connecting the usb.
Either of them should work with your situation, as they both have the same circumstances as yours.
The main point of what I just said, is to either get your phone to soft reboot or completely drain the phone from charge and try booting to recovery again.
Click to expand...
Click to collapse
OK thanks ; i will tri this and send to you a feedback
MrMonti said:
OK thanks ; i will tri this and send to you a feedback
Click to expand...
Click to collapse
Hello guys,
I tried every thing you said but nothing works!! the phone still always rebooting , even after the battery is completly drained when i connect the charger it start rebooting again , and the PC still not detect the phone!
Do you have any other solutions pleasaaaase
MrMonti said:
Hello guys,
I tried every thing you said but nothing works!! the phone still always rebooting , even after the battery is completly drained when i connect the charger it start rebooting again , and the PC still not detect the phone!
Do you have any other solutions pleasaaaase
Click to expand...
Click to collapse
Unfortunately friend you have no more options left. You have to send it to an authorized service center.
They will fix this issue for you, leave this matter to the professionals and don't further complicate things by messing with your device unnecessarily.
MrMonti said:
Hello my friends;
i tried to root my infinix zero 8 with magisk ; i unlocked the phone and i patched the boot.img but the phone now give orange state ''your device is unlocked and not trusted'' and the phone keep rebooting
i tried to flash the boot.img via SP flash tools but my PC now cant detect the phone because of the continuous rebooting.
i tried to use the volume up +power button but this fail too.
i can't get to fastboot to flash the phone..
please i'm deseperate and i really need your help.
Click to expand...
Click to collapse
i had that exact same problem. what you need to do is open up the back and disconnect the battery. then i hope you have all its usb drivers installed, if not install them. then you need to use this https://github.com/MTK-bypass/bypass_utility you can also look at some guides on youtube on how to set everything up as the github guide aint all that specific. then run that main.py and while holding, if i remember correctly, volume down connect the phone without battery being connected. after some tries it should say sth along the lines of protection disabled or sth and then without disconnecting flash your rom using sp flash tool. that worked for me. and also dont be put off if that bypass tool doesnt work on the first try. it took me like atleast 30 tries to get it working.
hope it helps
kusti420 said:
i had that exact same problem. what you need to do is open up the back and disconnect the battery. then i hope you have all its usb drivers installed, if not install them. then you need to use this https://github.com/MTK-bypass/bypass_utility you can also look at some guides on youtube on how to set everything up as the github guide aint all that specific. then run that main.py and while holding, if i remember correctly, volume down connect the phone without battery being connected. after some tries it should say sth along the lines of protection disabled or sth and then without disconnecting flash your rom using sp flash tool. that worked for me. and also dont be put off if that bypass tool doesnt work on the first try. it took me like atleast 30 tries to get it working.
hope it helps
Click to expand...
Click to collapse
but in my case i had literally 0 signs of life, so i was even worse off than you and i got it unbricked like that today
MrMonti said:
How can i flash it without PC !!!!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello i got infinix zero 8 but i cant unlock it my pc cant read it after booting to bootloader and my pc said: Waiting for device how did you unlock your bootloader?
Jericho.sambile said:
Hello i got infinix zero 8 but i cant unlock it my pc cant read it after booting to bootloader and my pc said: Waiting for device how did you unlock your bootloader?
Click to expand...
Click to collapse
Hi , i tried everything but nothing works.
So i took my infinix to the after sale service and they repaired my phone.
It's the safest way.
Good luck
kusti420 said:
i had that exact same problem. what you need to do is open up the back and disconnect the battery. [...]
Click to expand...
Click to collapse
I F*** my system trying to do TWRP with the wrong ROM , unfortunately I ended up killing "Boot.img" and "Recovery.img". I'm a few weeks looking for help from any UNBRICK, but that doesn't happen.
Finally, I understand that there really is no way to proceed without opening the back and removing the battery plug.
# I'm thinking about the best way to proceed with this, all I did was this:
All drivers mtk
SP drivers
bypass
brom.bat
libUSB (MediaTek_USB_Port)
OPPO
python
it's all unlocked, but i didn't root. I downloaded firmware: X687-H851D-Q-OP-210705V513
"SWD AfterSales" seems to work, however SP Flash Tool is universal...
KEEP CALM!
Spoiler: End happy :)
[PT-BR]: language in portuguese... [I ask someone to translate to English, thank you]
UnBrick do iz8
Leia tudo antes de sair fazendo!
Você vai precisar instalar algumas coisa no seu Pc, é simples e rapidinho;
- All drivers mtk
- SP drivers
- bypass (brom.bat)
- libUSB (MediaTek_USB_Port)
- drivers OPPO (se não reconhecer, instalar)
- python 3.7 ou superior se conseguir
Se lembre que é fazer flash igual com qualquer outro Android que usa SP Tools, não tem segredo, nem mistério, é bem simples de fazer flash!
Segue esse vídeo do tutorial referente a instalação dos drivers,
tá extremamente bem explicado, mesmo assim há um fórum xda logo abaixo do video, traduza a página e leia - Obviamente você não vai seguir com processo DA, instalando ROM de outro aparelho, sim!?
Continuando...
Agora, chegou a parte sobre o problema "X". Assim como alguns outros modelos atuais Android, por segurança tem seu pré inicialização bloqueada e por isso ele ficará no LOOP... infinitamente reinicando, tentando entrar em modo Fastboot, recovery, twrp ou os 5 segundos de bootloader, porém já não existe mais essa inicialização do sistema.
Para que você tenha acesso é necessário desplugar o conector da bateria direto da placa, assim quando pedir acesso ao Z8 você poderá dar aceite no processo "Brom.bat". Então o próximo passo é abrir a traseira do aparelho (que é ridiculamente simples) e em seguida a primeira camada de trás — não tudo só até aonde se encontra o plug da bateria.
Como exemplo, veja esse cara desmontando:
Caso não tenha aparelho pra descolar a tampa, esquente sua própria mão as quinhas e laterais do aparelho pra amolecer a cola, faça o mesmo em torno das câmeras, sempre com muito cuidado pra não se queimar :')
Se não tiver os matérias, corte uma lasca pequena de garrafa pet e começamos a remover a tampa traseira indo de baixo para cima e tomando cuidado com GAVETA SLOT SIM e com LEITOR DE DIGITAIS,
TOME EXTREMO CUIDADO NESSA ÁREA, SE DANIFICA O CABO JÁ ERA!
és um dos motivos de porque tem gente que tá vendendo iZ8 sem leitor de digitais funcionando.
Depois de remover todo o necessário com cuidado; faça o processo de FLASH da forma normal com o telefone desligado. Na inicialização do Flash, ASSIM QUE PLUGAR no USB aperte sua tecla de volume "+" e pronto, Será reconhecido no => brom.bat <=
DESMARQUE O PRELOADER, pois pode ser apagado o IMEI, informações importantes OU dados de autenticação
SEMPRE "Download Only", SEMPRE✓
Finalizado, em seguida o SP Tools já pode está iniciando para vossa alegria
Observação importante:
ROM usada foi referente ao que o telefone se encontrava no momento: X687-H851D-Q-OP-210705V513
se não consegui instalar o LibUSB quando estiver no LOOPBoot, conseguirá instalar sem tá plugado na bateria!
Caso precise de algum aquivo de autenticação, ali embaixo do Scatter, procure! O utilizado foi "auth_sv5.auth", vou tentar deixar um link no Gdrive... ✓
coloquei algodões nas cameras se desprotegidas ou sele com fita adesiva até o momento da montagem do aparelho pra não ficar resto de poeira
~ se chegou até aqui, fique ciente de que você não comprou essas Informações, então de maneira alguma cobre para ajudar o próximo!
!
faça tudo com calma, paciência e em um lugar visivelmente limpo e sem risco de poeira, boa sorte!
Arquivos - Google Drive
drive.google.com
*******
Se algo estranho acontecer ou houver algum empecilhos tente isso:
Coloque o arquivo "Checksum.ini" dentro da pasta que esta a ROM (descompactada) e use a versão v5.1924 do SP Flash Tool.
Escolha o arquivo "auth_sv5.auth" em autenticação de arquivo, dessa vez marque só o boot e recovery e flash. Então veja a mágica acontecer!
********
Hello
Recently my phone just started Bootlooping.
So far I have tried rebooting it, and trying to go into safe mode. But so far it is currently stuck rebooting itself. If I try to reboot to safe mode or factory settings it just boots up again. I tried the couple odd tricks on the forum like pressing the power button and similar but it’s not working.
en el mio paso algo similar y lo tuve que mandar a reparar y era un problema de soldadura en la memoria y procesador
Mod translation: something similar happened in mine and I had to send it to be repaired and it was a soldering problem in the memory and processor.