Related
Warning: The whole procedure is fully Experimental, this tool can brick your device, I will not responsible if you brick your device, try it with your own risk.
I have not tried the method yet, this tool performs so many function with NOKIA 6 too, but I didn't use the UNLOCK BOOT LOADER option yet, I want a tester who has already unlocked the bootloader and want to re-lock it, try it and give a feedback if it works
I would like to share a tool with you guys, this tool can perform many functions
Note: turn off your antivirus first then proceed
Download the tool from here
https://mega.nz/#!9Up1XJ5a!1nhxdqtIljdItjgPers9qM0ry8d4Dhc8HOX5pJ2mEQI
This tool is patched already so you do not need to crack it or use any BOX for it.
This tool works without box or modem
You only need to see if your PC is up to date and all drivers and frameworks are up to date or not
Now open you tool
REMEMBER: Turn off your Anti virus application before launching the app
Now an UI will appear, select "MIRACLE CRACK 2.27A" from there.
Now connect your device to your PC. Make sure your on DEVELOPER MODE
Then a new UI will appear, select on "ANDROID" Then "HOME ADB"
After that if you want to unlock your BOOTLOADER, reboot your device into download mode then select unclock bootloader from the options
Or RE-LOCK option is also available
Finally click start button
Done
Hit thanks button if you find this useful
happy flashing
Ok. I will test and report to you.
My data is too much I will weigh.
taicracker said:
Ok. I will test and report to you.
My data is too much I will weigh.
Click to expand...
Click to collapse
Okay sure, thank you, also try if custom recovery could be install by this tool or not...
May this tool will help many users in future.. :fingers-crossed:
Does the Nokia device have exclusive system keys such as Sony (DRM key) devices? Unlocking loses those keys. Can you tell me. And I will test this tool soon.
taicracker said:
Does the Nokia device have exclusive system keys such as Sony (DRM key) devices? Unlocking loses those keys. Can you tell me. And I will test this tool soon.
Click to expand...
Click to collapse
I don't know buddy about that, i didn't had any sony device in tha past.
Sorry...
I won't force you to test this tool my dear friend
Its up to you :good:
Tell me about this, if this work
Hope for the best :fingers-crossed:
Ok I will test
taicracker said:
Ok I will test
Click to expand...
Click to collapse
Sure
sltushar said:
Sure
Click to expand...
Click to collapse
Could not connect to phone. Do you have any solutions?
Log:
Welcome to use Miracle Box
(World's First Fuzzy Logic Based Tool)
Update:16-01-09
Connected OK.
Check Authentication...
Check the new version.
Abort by User
Fuzzy Logic Method is very safe and reliable !
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Connecting to Phone,Wait..
Timeout. Please Check Pinouts or ReDo
Abort by User
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Connecting to Phone,Wait..
>>Timeout. Please Check Pinouts or ReDo
taicracker said:
Could not connect to phone. Do you have any solutions?
Log:
Welcome to use Miracle Box
(World's First Fuzzy Logic Based Tool)
Update:16-01-09
Connected OK.
Check Authentication...
Check the new version.
Abort by User
Fuzzy Logic Method is very safe and reliable !
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Connecting to Phone,Wait..
Timeout. Please Check Pinouts or ReDo
Abort by User
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Connecting to Phone,Wait..
>>Timeout. Please Check Pinouts or ReDo
Click to expand...
Click to collapse
Do your computer has all driver and framework installed properly?
And do your phone is developer mode on, also make sure in developer mode allow oem unlock option is turned on.
Because my phone is working fine with it, just not ready right now for any brick, damaged, dead cause to device, because this is only the source right now i have.
Try rebooting to fastboot from ADB option on the tool, if it works then it might unlock the bootloader too, check the drivers..
Finger crossed :fingers-crossed:
sltushar said:
Do your computer has all driver and framework installed properly?
And do your phone is developer mode on, also make sure in developer mode allow oem unlock option is turned on.
Because my phone is working fine with it, just not ready right now for any brick, damaged, dead cause to device, because this is only the source right now i have.
Try rebooting to fastboot from ADB option on the tool, if it works then it might unlock the bootloader too, check the drivers..
Finger crossed :fingers-crossed:
Click to expand...
Click to collapse
The ADB system works well, maybe ROOT is.
But fastboot mode does not work. I also try to put the phone on fastboot mode with OST (edit fone information)
But Miracle Box does not work with fastboot of Nokia 6. (Wait for developer update)
You cracked the picture as old version, maybe it Nokia 6 not support )
taicracker said:
The ADB system works well, maybe ROOT is.
But fastboot mode does not work. I also try to put the phone on fastboot mode with OST (edit fone information)
But Miracle Box does not work with fastboot of Nokia 6. (Wait for developer update)
You cracked the picture as old version, maybe it Nokia 6 not support )
Click to expand...
Click to collapse
Well, i think i need to try it on my device, i will, but not now, later on
I just reconsider and can not Root with this tool always
taicracker said:
I just reconsider and can not Root with this tool always
Click to expand...
Click to collapse
Fine, can you try one more thing, see if it can flash recovery with this tool.
sltushar said:
Fine, can you try one more thing, see if it can flash recovery with this tool.
Click to expand...
Click to collapse
Are not! The fastboot (Flash) and ADB modes do not work, just see the phone's information. I tried the tool buttons but it does not work even ROOT.
taicracker said:
Are not! The fastboot (Flash) and ADB modes do not work, just see the phone's information. I tried the tool buttons but it does not work even ROOT.
Click to expand...
Click to collapse
Well, for me both worked, but i didn't tried tha bootloader option
I will try once i get professional job, since this is only the source right now
May be you're already rooted or custom recovery installed so its not working or may be driver problem, because my system is detecting in both adb and fastboot mode..
sltushar said:
Well, for me both worked, but i didn't tried tha bootloader option
I will try once i get professional job, since this is only the source right now
May be you're already rooted or custom recovery installed so its not working or may be driver problem, because my system is detecting in both adb and fastboot mode..
Click to expand...
Click to collapse
I flashed the software through OST and tried ROOT but failed. I tried the other options but failed. ^^. It's possible to share your gadget with your Nokia 6, and my TA-1000.
taicracker said:
I flashed the software through OST and tried ROOT but failed. I tried the other options but failed. ^^. It's possible to share your gadget with your Nokia 6, and my TA-1000.
Click to expand...
Click to collapse
May be, mine is TA-1021, May be both having different bootloader
Why dont you flash MENA firmware and try one more time, may be this work
Because it works on stock android, and your one is Chinese varient
sltushar said:
May be, mine is TA-1021, May be both having different bootloader
Why dont you flash MENA firmware and try one more time, may be this work
Because it works on stock android, and your one is Chinese varient
Click to expand...
Click to collapse
Ok. I will flash my TA-1025 firmware to my phone and try unlocking the bootloader again. Or wait for the updated Android 8.0 Oreo sure Unlock the bootloader (I think so) Because Nokia 8 can Unlock bootloader already.
taicracker said:
Ok. I will flash my TA-1025 firmware to my phone and try unlocking the bootloader again. Or wait for the updated Android 8.0 Oreo sure Unlock the bootloader (I think so) Because Nokia 8 can Unlock bootloader already.
Click to expand...
Click to collapse
Sure brother, i have somany tools, let see which one can unlock it
:fingers-crossed:
sltushar said:
Sure brother, i have somany tools, let see which one can unlock it
:fingers-crossed:
Click to expand...
Click to collapse
I tried flashing fw (nb0) of TA-1025 into my TA-1000 and tried ROOT with unlock bootloader but this tool is really not working.
Log:
http://forum.gsmhosting.com/vbb/12807875-post1.html
Miracle ViVo Tool 2.02 (New) 5th Jan 2018
http://forum.gsmhosting.com/vbb/12885172-post1.html
How to Use Miracle Video Tutor
http://video.amiraclebox.com
______________________________
www.dealer.amiraclebox.com
Buy 1 year Support Activation
Buy Huawei Activation Pack
________[Social Site]_________
https://facebook.com/amiracleteam
https://twitter.com/amiracleteam
______________________________
Must fastboot mode.
Follow the prompts in the phone screen
Note:After Bootloader Unlock Need Flash
Connecting to Phone,Wait..
Abort by User
Connecting to Phone,Wait..
Connecting to Phone,Wait..ok
checking info...
Model:TA-1025
Android Ver:7.1.1
Rooting...
ROOT Fail!
Dear Global Xiaomi Mi Note 3 Jason users,
I have a big problem with my new Jason. After unlocking and installing few roms through TWRP, I have several problems:
1) Lighting sensor not working;
2) Proximity sensor not working;
3) Magnetic Field sensor not working;
4) Stock camera turning on after 20 sec (just need to wait 20 sec to take a picture).
I tried:
1) both global and CN stable roms, AOSP based Roms - installed over TWRP after all wipe and format - the same
2) Global and CN roms through Fastboot with Locking bootloader and all clean - the same
Is it other way to make super deep reset to make my phone work like should be?
Really sad situation - Please, Help me....
Hi,
enter CIT by tapping several times on Kernel version in Settings and test the sensors. If they fail to pass it is probably a hardware fault and you need to take it to service.
CIT failed
zaqm said:
Hi,
enter CIT by tapping several times on Kernel version in Settings and test the sensors. If they fail to pass it is probably a hardware fault and you need to take it to service.
Click to expand...
Click to collapse
Camera test ok (need to wait), other sensors (in list in my first post) in CIT - failed.
MManas said:
Camera test ok (need to wait), other sensors (in list in my first post) in CIT - failed.
Click to expand...
Click to collapse
Sorry to hear that. Most probably your phone is faulty and has to be taken to repair.
zaqm said:
Sorry to hear that. Most probably your phone is faulty and has to be taken to repair.
Click to expand...
Click to collapse
I finished with my experiments, latest Global Rom installed, Bootloader locked....
Back to seller - seller Geekbuying.
solution
https://forum.xda-developers.com/mi...-supported-t3762764/post75876965#post75876965
mendocino_610 said:
solution
https://forum.xda-developers.com/mi...-supported-t3762764/post75876965#post75876965
Click to expand...
Click to collapse
OK Guys:
Fast Camera switch back, sensors back.
Instruction:
Go to fastboot with rabbit, then go to CMD or Powershel of your fastboot file and go to edl mode by writing: fastboot oem edl
Phone Boot into EDL Mode - display is black,
- go to stable rom flashable with fastboot mode and find there and open with notepad the file rawprogram0.xml and search for "persist".
In the found line, change filename="" to filename="persist.img"
Save and flash the ROM with MIflash.
Now you should get your sensors back.
SUPER. Thank you for everybody.
MManas said:
OK Guys:
Fast Camera switch back, sensors back.
Instruction:
Go to fastboot with rabbit, then go to CMD or Powershel of your fastboot file and go to edl mode by writing: fastboot oem edl
Phone Boot into EDL Mode - display is black,
- go to stable rom flashable with fastboot mode and find there and open with notepad the file rawprogram0.xml and search for "persist".
In the found line, change filename="" to filename="persist.img"
Save and flash the ROM with MIflash.
Now you should get your sensors back.
SUPER. Thank you for everybody.
Click to expand...
Click to collapse
Could you explain step by step please. I can't follow these instructions.
Thanks.
juv3nal said:
Could you explain step by step please. I can't follow these instructions.
Thanks.
Click to expand...
Click to collapse
I explained step by step for advanced users, for beginners use google for every step, you will find detail info how to do...
Sorry.
https://forum.xda-developers.com/mi-note-3/how-to/guide-how-to-solve-dont-gyroscope-t3814329
Full solution, easy
MManas said:
OK Guys:
Fast Camera switch back, sensors back.
Instruction:
Go to fastboot with rabbit, then go to CMD or Powershel of your fastboot file and go to edl mode by writing: fastboot oem edl
Phone Boot into EDL Mode - display is black,
- go to stable rom flashable with fastboot mode and find there and open with notepad the file rawprogram0.xml and search for "persist".
In the found line, change filename="" to filename="persist.img"
Save and flash the ROM with MIflash.
Now you should get your sensors back.
SUPER. Thank you for everybody.
Click to expand...
Click to collapse
So good.Thank you!!!
This is an untouched copy of the recent update for our devices. It has no file extension from TCL, but I'll leave info on how to download the firmware originally below, with it mirrored to Android File Host. Can just open this file like a Zip file
Original Link from TCL grabbed with LogCat
Code:
https://g2slave-ap-north-01.tclcom.com/64c9b63f5a85fdd27b552eec614f884add8fdb67/54/586054
Mirror Link: https://www.androidfilehost.com/?w=files&flid=322525
I have tried patching the Boot.img.p with Magisk, but it doesn't recognize the file format. Renamed it to just boot.img, still won't patch
KaptinBoxxi said:
This is an untouched copy of the recent update for our devices. It has no file extension from TCL, but I'll leave info on how to download the firmware originally below, with it mirrored to Android File Host. Can just open this file like a Zip file
Original Link from TCL grabbed with LogCat
Code:
https://g2slave-ap-north-01.tclcom.com/64c9b63f5a85fdd27b552eec614f884add8fdb67/54/586054
Mirror Link: https://www.androidfilehost.com/?w=files&flid=322525
I have tried patching the Boot.img.p with Magisk, but it doesn't recognize the file format. Renamed it to just boot.img, still won't patch
Click to expand...
Click to collapse
Completely new to this phone. Nice grab! I was able to use your download and 7z zip to extract boot.img from boot.img.p.
I tried to put this file into magisk but no luck.
Have you been able to unlock the bootloader yet?
I tried the fastboot OEM unlock and fastboot flashing unlock when in bootloader mode but it doesn't work.
With someone else's help I was able to locate where the boot.img is located on the phone but unable to extract it.
/dev/block/bootdevice/by-name/boot
Backup boot.img via terminal one-line command
I am trying to make an image backup of boot. The script must work on any android. I think on any Android the boot location is /dev/block/platform/???/by-name/boot My command line find /dev/block/
android.stackexchange.com
Screenshots attached.
JayTM said:
Completely new to this phone. Nice grab! I was able to use your download and 7z zip to extract boot.img from boot.img.p.
I tried to put this file into magisk but no luck.
Have you been able to unlock the bootloader yet?
I tried the fastboot OEM unlock and fastboot flashing unlock when in bootloader mode but it doesn't work.
With someone else's help I was able to locate where the boot.img is located on the phone but unable to extract it.
/dev/block/bootdevice/by-name/boot
Backup boot.img via terminal one-line command
I am trying to make an image backup of boot. The script must work on any android. I think on any Android the boot location is /dev/block/platform/???/by-name/boot My command line find /dev/block/
android.stackexchange.com
Screenshots attached.
Click to expand...
Click to collapse
I did the same thing you probably did to attempt to patch it with Magisk, no luck. I haven't had the time to try further recently. Enabling OEM Unlock and attempting to unlock the bootloader just leads to needing an unlock code, much like bootloader unlocking a Moto device.
I contacted TCL support a long time back when I first got the phone and they were 100% not willing to help with any USA based TCL 10 Pro unlocking. The customer service worker literally said they weren't allowed to help with US based devices. There's no downloads anywhere for the firmware either, which I think goes against Google's agreement to android on a device, but I'm not 100% sure on that.
KaptinBoxxi said:
I did the same thing you probably did to attempt to patch it with Magisk, no luck. I haven't had the time to try further recently. Enabling OEM Unlock and attempting to unlock the bootloader just leads to needing an unlock code, much like bootloader unlocking a Moto device.
I contacted TCL support a long time back when I first got the phone and they were 100% not willing to help with any USA based TCL 10 Pro unlocking. The customer service worker literally said they weren't allowed to help with US based devices. There's no downloads anywhere for the firmware either, which I think goes against Google's agreement to android on a device, but I'm not 100% sure on that.
Click to expand...
Click to collapse
Android 11 for the TCL 10L has been being pushed in italy. This a large file about 2 to 3 GB. I really hope when we see it on our phones you are able to pull the link from logcat as well. This should be the entire rom. All we have now is OTA patch files. I've tried so many things. I have all drivers fully working even the Qualcomm 9008 Diagnostic driver. I can put the phone into EDL mode.
To put phone into EDL mode you need usb debugging enabled and type in secret code into the dialer *#*#3424#*#* which enables the diagnostic port via toast notification. Then turn phone off, hold both volume up and volume down and plug phone into PC. You will be prompted with the Download mode screen. Hold volume up to enter EDL.
There are ways to backup in EDL mode, I'm just not well versed in commands.
JayTM said:
Android 11 for the TCL 10L has been being pushed in italy. This a large file about 2 to 3 GB. I really hope when we see it on our phones you are able to pull the link from logcat as well. This should be the entire rom. All we have now is OTA patch files. I've tried so many things. I have all drivers fully working even the Qualcomm 9008 Diagnostic driver. I can put the phone into EDL mode.
To put phone into EDL mode you need usb debugging enabled and type in secret code into the dialer *#*#3424#*#* which enables the diagnostic port via toast notification. Then turn phone off, hold both volume up and volume down and plug phone into PC. You will be prompted with the Download mode screen. Hold volume up to enter EDL.
There are ways to backup in EDL mode, I'm just not well versed in commands.
Click to expand...
Click to collapse
I'm wondering if I can pull some social engineering off, maybe be like "Hey my phone reset itself, can't boot it, but I read online something for a samsung phone called Odin and Fastboot and such? Some how you can install the system that way?" See what they say/link me to
KaptinBoxxi said:
I'm wondering if I can pull some social engineering off, maybe be like "Hey my phone reset itself, can't boot it, but I read online something for a samsung phone called Odin and Fastboot and such? Some how you can install the system that way?" See what they say/link me to
Click to expand...
Click to collapse
Good luck to you.
I contacted TCL support myself with no luck. They immediately put my case in pending close status.
Is there a way this ZTE tool can be modified to work for our device?
Axon 7 EDL Tool - Flash / Backup / Restore / Unlock in the EDL mode
Axon 7 EDL Tool BAT-program for Flash / Backup / Restore / Unlock the phone in EDL mode Qualcomm HS-USB QDLoader 9008 (COM ...) !!! Whatever you do, you do at your own risk !!!" !!! If you are not sure of yourself do not use this program ...
forum.xda-developers.com
All partitions are detected in EDL mode.
JayTM said:
Is there a way this ZTE tool can be modified to work for our device?
Axon 7 EDL Tool - Flash / Backup / Restore / Unlock in the EDL mode
Axon 7 EDL Tool BAT-program for Flash / Backup / Restore / Unlock the phone in EDL mode Qualcomm HS-USB QDLoader 9008 (COM ...) !!! Whatever you do, you do at your own risk !!!" !!! If you are not sure of yourself do not use this program ...
forum.xda-developers.com
All partitions are detected in EDL mode.
Click to expand...
Click to collapse
I'll check it out. If its possible to view the code in a tool like dnSpy or extract files from the exe with 7zip, its possible to use with our device, i'm sure as long as the commands are similar
Well you're in luck as it is just a .bat file program simple notepad++ will do.
I will be following this thread with intrest, root could be the deciding factor in me purchasing this device.
Tech101yt said:
I will be following this thread with intrest, root could be the deciding factor in me purchasing this device.
Click to expand...
Click to collapse
Have had the phone for less than 6 months and I'm already having LCD issues. When the display is off, just sitting on a table or something, it'll flash white randomly like its getting an electric signal at random. Its nothing I did. I've never hard dropped the thing. Everywhere I go pretty much is carpeted except work. If manufacturer warranty doesn't cover me, I'll stop recommending the phone to people
I actually switched to an Essential Phone recently. Way better experience, way cheaper too. I have around a dozen of them anyway and have been selling em on swappa (dunno if I'm allowed to say that here, but oh well) lol
@KaptinBoxxi Sounds like you have Ambient Display on for notifications.
mschoolbus said:
@KaptinBoxxi Sounds like you have Ambient Display on for notifications.
Click to expand...
Click to collapse
Nah its turned off. It flashes like a broken LCD would look. All snowy and stuff like an old TV. Its not notifications, just a bad LCD
that sucks... could try reseating the screen's ribbon cable :-/
can anybody share the full update rom about android 11?
top170 said:
can anybody share the full update rom about android 11?
Click to expand...
Click to collapse
I don't believe anyone has Logcatted the update process yet to get the firmware, but on the subject of this post, I do have some updates
I was digging through my Logcat from january and realized I missed something massive. I have yet to figure out the URL structure, but I have all the info for it.
So when you go to the following link, it gives a bunch of errors of missing info
https://g2master-sa-east.tclclouds.com/notify_new.php
For the firmware here on this post at least, each value from my device is
Code:
id = 0156260
curef = T799B-2ALCUS11
vk = 741ace917e3527af81412ca93b0fcce2de04a264
salt = 1611977254070885419
fv = 4DJ1LM10
tv = 4DJBLMB0
op = 1000
status = 999
mode = 2
cltp = 10
type = firmware
formatted from logcat
reportContent= {"id":"0156260","salt":"1611977254070885419","curef":"T799B-2ALCUS11","fv":"4DJ1LM10","tv":"4DJBLMB0","mode":"2","cltp":"10","type":"Firmware","op":"1000","status":"999","vk":"741ace917e3527af81412ca93b0fcce2de04a264"}
no matter what, I get the errors on the web page
Hello everybody
I am a beginner and before look for bootloader my Huawei m5 8.4, I would know if it is possible to have Android 10 or 11 on my tablet (Sht-w09)?
Thanks for your help
Perhaps my request seem strange but it is important for me to have the answer to do not mistake.
If it is impossible, I don't touch at my bootloader
Officially you will not get Android 10 or 11 on your SHT-W09, inofficially you can run the GSI-builds, e.g. from https://github.com/phhusson/treble_experimentations/releases
Thanks. I like the inofficialy solution
If I understood, I must install treble on my tablet and choose any version of Aosp?
you do not need to "install" treble. The Android version of the M5 is based on treble and that enables you to install those GSI images.
... are you sure you know what you are doing and you have your bootloader already opened? Please read and study a bit before starting to mess with ROM flashing. It's quite easy to create a brick
Yes you have reason when you wrote your post because I had use DC-unlocker for my bootloader but when I installed test point, my tablet has turned off and no longer turns on, no longer charges.
I tried power bottom during 30 s, volume bottom etc.
My tablet is dead.
@Renarde I'm really sorry to hear that. It's always better to be save than sorry.
Thanks you AnDiSa, but I think that nothing can be save
Anyone can help me please.?
Renarde said:
Yes you have reason when you wrote your post because I had use DC-unlocker for my bootloader but when I installed test point, my tablet has turned off and no longer turns on, no longer charges.
I tried power bottom during 30 s, volume bottom etc.
My tablet is dead.
Click to expand...
Click to collapse
It is not clear, did you successfully unlock your bootloader?? If yes, did you flash the right phh treble "*.img"?
No I don't unlock my bootloader, I only install Software testpoint and then my tablet had turn off for ever I think.
I do that :
DC-phoenix enable software TP
DCphoenix enable software testpoint
www.dc-unlocker.com
Renarde said:
No I don't unlock my bootloader, I only install Software testpoint and then my tablet had turn off for ever I think.
I do that :
DC-phoenix enable software TP
DCphoenix enable software testpoint
www.dc-unlocker.com
Click to expand...
Click to collapse
I read that that sw is able to downgrade emui, contact the dc-unlocker team or you could restore the original firmware with the Huawei suite.
My pc don't detect my Huawei m5
Renarde said:
My pc don't detect my Huawei m5
Click to expand...
Click to collapse
Neither in fastboot mode???
Fastboot mode don't work, I try it.
The screen is black, nothing happen, no light etc
Renarde said:
Fastboot mode don't work, I try it.
The screen is black, nothing happen, no light etc
Click to expand...
Click to collapse
I suggest to search on the web, any android devices should boot in fastbost or recovery mode. Do you try to downgrade the firmware or flash a wrong one?
I remember to enter in fastboot mode: while is off, press VOL UP then connect to a usb port the M5.
For the recovery mode: the M5 is off, press POWER+VOLUP.
I downgraded via Hi suite to Android 8 before doing the manipulations.
I try fasboot mode and recovery mode without sucess
Renarde said:
I downgraded via Hi suite to Android 8 before doing the manipulations.
I try fasboot mode and recovery mode without sucess
Click to expand...
Click to collapse
But android 8 booted? i think no. There is a guide to downgrade the os, you cannot simply flash an older firmware.
I found this, this user uses erecovery.
Hello all,
I am really new to anything related to phone modding.
I have a broken screen but have managed to recover all its data.
The phone is neither able to display anything nor respond to touches.
But now I would like to flash/boot a fresh OS that has only a terminal for writing scripts.
Basically, I am looking for an OS that can be interacted via the ADB shell (or any other medium except the screen), where I can install scripts and executables.
I could install something like Ubuntu Touch or LineageOS, but I don't have a screen to go through the process of installing them and I don't know a way to do it without the screen.
Model name if required: Motorola Z2 Play (albus)
Please do suggest any workarounds if what i am expecting isn't possible.
Thanks in advance.
It all depends on how badly the screen is damaged (does not display an image, touch does not work on part or all of the screen) and whether the model has otg.
ze7zez said:
It all depends on how badly the screen is damaged (does not display an image, touch does not work on part or all of the screen) and whether the model has otg.
Click to expand...
Click to collapse
The screen is badly broken. It does not display anything nor respond to touch inputs. (will edit original post)
I know the device still functions perfectly because I am able to boot into fastboot and even boot a TWRP image.
I did not understand the "OTG" part. I am able to connect it to my desktop via USB.
gfish35 said:
(...)
I did not understand the "OTG" part. I am able to connect it to my desktop via USB.
Click to expand...
Click to collapse
OTG allows you to connect a mouse and keyboard. Otherwise, you won't install any OS.
gfish35 said:
The screen is badly broken. It does not display anything nor respond to touch inputs.
I know the device still functions perfectly because I am able to boot into fastboot and even boot a TWRP image.
Click to expand...
Click to collapse
ze7zez said:
OTG allows you to connect a mouse and keyboard. Otherwise, you won't install any OS.
Click to expand...
Click to collapse
Yes, I have OTG hardware. I have previously connected a USB keyboard to the device.
Since the screen is black, get a backup of the working ROM made in twrp for your model from the XDA forum community to restore the ROM on your phone.
The existing Android ROM is wiped. So there is no ROM present right now. Only a recovery for LineageOS is present. Can I install a ROM freshly? If yes, how do I do that?
Thank you.
You won't install fresh because you won't go through the installer screens. By flashing TWRP for your model you will have the option to restore the backup ROM using TWRP commands via adb.