Related
According to the Verizon Galaxy S5 Update Page:
The current software update gives you the most up to date Android® security patches on your device.
Click to expand...
Click to collapse
The security patch included is the April (2017-04-01) one.
Stock No-Wipe FW. Will remove Developer Status Bootloader:
G900VVRS2DQD1_G900VVZW2DQD1_G900VVRS2DQD1_HOME.tar.md5.zip
Developer Bootloader Friendly:
G900VVRS2DQD1_G900VVZW2DQD1_G900VVRS2DQD1_HOME_No_Aboot.tar.md5.zip
what does the Developer Bootloader Friendly mean or differ from Stock No-Wipe FW. Will remove Developer Status Bootloader?
Thankyou!
knight194 said:
what does the Developer Bootloader Friendly mean or differ from Stock No-Wipe FW. Will remove Developer Status Bootloader?
Thankyou!
Click to expand...
Click to collapse
If you have a Developer Edition phone, the Stock one will remove the Developer status. The Developer Bootloader Friendly one won't.
Quick question... I've been on Lineage, and have flashed this and gone back (to update the baseband). But, do you know off-hand, how do I easily root on this image? My BL is still unlocked and I've got TWRP reinstalled.
Thanks!
sry this is off subject but what is the latest modem update for the 900v or the best one in regards to best lte signal?
nictabor said:
Quick question... I've been on Lineage, and have flashed this and gone back (to update the baseband). But, do you know off-hand, how do I easily root on this image? My BL is still unlocked and I've got TWRP reinstalled.
Thanks!
Click to expand...
Click to collapse
If you have TWRP installed, just flash a SuperSU zip (i.e. SuperSU 2.79 SR3) in recovery and you'll be rooted.
Unless of course you're talking about going back to Lineage and re-rooting. In that case, you'll have to use the Lineage root zip, which I don't have a link to.
KazuDante said:
sry this is off subject but what is the latest modem update for the 900v or the best one in regards to best lte signal?
Click to expand...
Click to collapse
Normally the latest update provides the latest/best modem.
Dudash said:
If you have TWRP installed, just flash a SuperSU zip (i.e. SuperSU 2.79 SR3) in recovery and you'll be rooted.
Unless of course you're talking about going back to Lineage and re-rooting. In that case, you'll have to use the Lineage root zip, which I don't have a link to.
Normally the latest update provides the latest/best modem.
Click to expand...
Click to collapse
where can i find the latest modem for the 900v , and im guessing its a flash process using odin correct?
KazuDante said:
where can i find the latest modem for the 900v , and im guessing its a flash process using odin correct?
Click to expand...
Click to collapse
It depends. It could be a .tar file you flash via Odin or it could be a flashable zip via TWRP. It depends on the maker of the file.
It's just the modem.bin file from the update. I don't have the time to make one for it right now.
Dudash said:
If you have TWRP installed, just flash a SuperSU zip (i.e. SuperSU 2.79 SR3) in recovery and you'll be rooted.
Unless of course you're talking about going back to Lineage and re-rooting. In that case, you'll have to use the Lineage root zip, which I don't have a link to.
Normally the latest update provides the latest/best modem.
Click to expand...
Click to collapse
I actually figured it out while waiting. Thank you for responding though!
nictabor said:
I actually figured it out while waiting. Thank you for responding though!
Click to expand...
Click to collapse
You're welcome.
On a side note, it seems like Verizon read the recent articles where the Galaxy S5 was still rated as the most popular smart phone being used on any network. Meaning, they are updating the phone monthly now, which is good news for us. We won't ever get Nougat but apparently we'll get Security Patches monthly now.
Dudash said:
It depends. It could be a .tar file you flash via Odin or it could be a flashable zip via TWRP. It depends on the maker of the file.
It's just the modem.bin file from the update. I don't have the time to make one for it right now.
Click to expand...
Click to collapse
so can i take the modem.bin file from this update and replace it with the one from a 7.1.2 rom ? also i used to mess with porting roms but on mediatek platform , are the modem files still located in /system/etc/firmware directory?
because what i see is modem.b00-b27 ,modem.mdt
---------- Post added at 08:04 PM ---------- Previous post was at 07:08 PM ----------
i tried flashing the dev friendly one and the md5 check failed....am i missing something?
Dudash said:
According to the Verizon Galaxy S5 Update Page:
The security patch included is the April (2017-04-01) one.
Stock No-Wipe FW. Will remove Developer Status Bootloader:
G900VVRS2DQD1_G900VVZW2DQD1_G900VVRS2DQD1_HOME.tar.md5.zip
Developer Bootloader Friendly:
G900VVRS2DQD1_G900VVZW2DQD1_G900VVRS2DQD1_HOME_No_Aboot.tar.md5.zip
Click to expand...
Click to collapse
Developer bootloader friendly??? Do 11 EMMC Chips finally have freedom???
how do we flash this update , odin fails on md5 check
Deleted
flashed the update but phone stuck on verizon logo.
did i do something wrong?
i would assume due to the fact that the bootloader is not its bootloader it froze/locked up , so heres my question if i flash the non dev friendly one , can that bootloader be unlocked or its better not to risk it?
KazuDante said:
flashed the update but phone stuck on verizon logo.
did i do something wrong?
i would assume due to the fact that the bootloader is not its bootloader it froze/locked up , so heres my question if i flash the non dev friendly one , can that bootloader be unlocked or its better not to risk it?
Click to expand...
Click to collapse
I would not do it.
erw38 said:
I would not do it.
Click to expand...
Click to collapse
Since there no tut regarding an unlocked version of this update I simply updated from bpb1 to qa1 , just needed my modem to be somewhat up to date , but it seems that it's def a tx rx issue in my case , so my best bet is a custom kernel with that feature included.
KazuDante said:
Since there no tut regarding an unlocked version of this update I simply updated from bpb1 to qa1 , just needed my modem to be somewhat up to date , but it seems that it's def a tx rx issue in my case , so my best bet is a custom kernel with that feature included.
Click to expand...
Click to collapse
I didn't think a tutorial was necessary as I've never had to give one in the past. If your device is unlocked, you should know it. That's the only reason there is a Dev Friendly version of the update. It won't unlock your bootloader, but it won't lock it if it is unlocked. That's the only reason I make a Developer Bootloader Friendly version of updates.
If you want to update your modem but not the firmware, open either of the files in 7zip/WinZip, extract the modem.bin, then repackage it as a .tar file and flash it in Odin.
KazuDante said:
flashed the update but phone stuck on verizon logo.
did i do something wrong?
i would assume due to the fact that the bootloader is not its bootloader it froze/locked up , so heres my question if i flash the non dev friendly one , can that bootloader be unlocked or its better not to risk it?
Click to expand...
Click to collapse
In regard to your previous post, there is no problem with the MD5 for either file or any problem with the files themselves. I test them both before uploading them to prevent problems like this for people. I flashed the Dev Friendly version on both of my eMMc 15 S5's and experienced zero problems. The phone will hang on the "Verizon logo" for a minute or two at first boot but it will go past it and continue to "Optimizing" after that.
If you flash the Stock version, if your bootloader is unlocked, it will lock it and in order to re-unlock it, you'll have to use jrkruse's unlock method which requires you to go back to PB1. As of this post, he has not created a QD1 bootloader unlocker. The latest bootloader unlocker he has created is for QC2, which still requires you to have an unlocked bootloader prior to flashing it.
EDIT: Also, if you use an app like Package Disabler Pro to disable applications without root, it can cause updates to hang indefinitely at first boot if you don't re-enable all disabled applications and turn off/remove Admin rights for Package Disabler Pro prior to updating. I've experienced this in the past with both of my S5's and my S7. I'm not directing this at you KazuDante, this is just a warning to all.
21-Savage said:
Developer bootloader friendly??? Do 11 EMMC Chips finally have freedom???
Click to expand...
Click to collapse
No. The Developer Bootloader Friendly version is just that, friendly to devices with a Developer Bootloader. Meaning it won't remove Developer Bootloader status/lock the bootloader.
If I had figured out a way to help all of the eMMc 11 people unlock their bootloader, I would've made a thread that clearly stated that.
I think the only way people with Toshiba eMMc's will get an unlocked bootloader is if either
A: Verizon provides an update to unlock the bootloaders on all S5's AFTER they stop putting out Security Updates, which is highly unlikely since it is Verizon, they've never done it before, and there's no end to Security Updates in sight.
B: Someone at Samsung or Verizon leaks an engineering bootloader. This is the most likely scenario since it's happened before. First, in my experience, with the VZW S3, and the latest being with the S7. There's still hope but it may rely on someone from within Verizon or Samsung feeling bad for us.
Sorry
@Dudash Any idea how to go from the Dev-friendly QD1 version you uploaded to a TWRP flashable zip file which resembles the jrkruse VZW_QA1_STOCK_ROOTED_DEODEXED.zip? I really like to debloat and root before flashing. Thanks!
According to the Verizon Galaxy S5 Update Page:
Android® Security Patch Level: 2017–08-01
The current software update gives you the most up to date Android security patches on your device.
Click to expand...
Click to collapse
This is basically the same thing they are doing with other devices. Since Samsung never released their September Security patch due to them addressing the BlueBorne problem, they have been re-releasing the QH* updates as QI* but they include the BlueBorne patch. For some reason, Verizon didn't include the BlueBorne patch in the changelog like they have been for every other phone.
For example. The Galaxy S6, Galaxy S8, and Galaxy S8+ updates all say
Includes: Blueborne security patch
The current software update gives you the most up to date Android® security patches on your device.
Click to expand...
Click to collapse
Who knows why they chose to include the exact same changelog as the prior update with the same security patch. Whatever. Verizon sucks. We all know it.
Stock No-Wipe Firmware:
*This will remove Developer Status/Lock your Bootloader*
G900VVRU2DQI2_G900VVZW2DQI2_G900VVRU2DQI2_HOME.tar.md5.zip
Developer Bootloader Friendly/No Aboot No-Wipe Firmware:
G900VVRU2DQI2_G900VVZW2DQI2_G900VVRU2DQI2_HOME_No_Aboot.tar.md5.zip
Also, I'm not sure how much longer I'll be doing this though because the screen on my S5 is going bad (flickering and flashing green whenever I bring it out of sleep) so this weekend I'm getting an S8+.
so its safe to say that the new modem ql2 is pretty much the same sa the previous update?
Updated to this build from QH2, flashed in odin, then booted up, reflashed TWRP and SU, froze system updater all good. If you do end up leaving, this will just be another loss for this model as no one else is updating the stock images anymore.
Thank you for your work on this. Does this have root, and if not, do those of us with locked bootloaders have a way to keep root and safestrap?
Tell us how the S8+ goes and if you can unlock the bootloader and root that. Thanks again!
Dudash said:
Stock No-Wipe Firmware:
*This will remove Developer Status/Lock your Bootloader*
G900VVRU2DQI2_G900VVZW2DQI2_G900VVRU2DQI2_HOME.tar.md5.zip
Developer Bootloader Friendly/No Aboot No-Wipe Firmware:
G900VVRU2DQI2_G900VVZW2DQI2_G900VVRU2DQI2_HOME_No_Aboot.tar.md5.zip
Also, I'm not sure how much longer I'll be doing this though because the screen on my S5 is going bad (flickering and flashing green whenever I bring it out of sleep) so this weekend I'm getting an S8+.
Click to expand...
Click to collapse
For the record, this loses root, and loses safestrap. I'm too dumb to know how to root this since I can't get TWRP on this phone, so I'm going to hope the way back to root and safestrap is get back Kitkat and then up to PB1 starting over using these steps.. This will probably be better for someone who knows what they're doing or just wants to upgrade for the security updates and doesn't care about root.
androidman807 said:
Thank you for your work on this. Does this have root, and if not, do those of us with locked bootloaders have a way to keep root and safestrap?
Tell us how the S8+ goes and if you can unlock the bootloader and root that. Thanks again!
Click to expand...
Click to collapse
I have a 15 Emmc chip and unlocked the bootloader via this thread: https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529
I flashed EMMC_15_VZW_QB2_STOCK_MAGISK_ROOT.zip to my phone. I also have TWRP installed.
Now, if I understand all this correctly, I can simply flash your Developler Boatloader friendly version via TWRP? This will upgrade my OS to the latest update? Then flash Magisk to get root back?
This all seems too simple.
You will also have to re-flash TWRP via Odon.
kevin98208 said:
I have a 15 Emmc chip and unlocked the bootloader via this thread: https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529
I flashed EMMC_15_VZW_QB2_STOCK_MAGISK_ROOT.zip to my phone. I also have TWRP installed.
Now, if I understand all this correctly, I can simply flash your Developler Boatloader friendly version via TWRP? This will upgrade my OS to the latest update? Then flash Magisk to get root back?
This all seems too simple.
Click to expand...
Click to collapse
HolyHog said:
You will also have to re-flash TWRP via Odon.
Click to expand...
Click to collapse
I too followed the instructions in the thread above for a CID 15 eMMC.
I was unable to flash the "G900VVRU2DQI2_G900VVZW2DQI2_G900VVRU2DQI2_HOME_No_ Aboot.tar.md5.zip" from the OP using TWRP, but was able to do it no problem using Odin 3.12 (AP option).
After flashing that I then used Odin again (AP option) to flash the latest TWRP (https://dl.twrp.me/klte/twrp-3.1.1-0-klte.img.tar.html). I then did another factory reset on the phone (since I had already just wiped my data following the bootloader instructions) and reinstalled Magisk from TWRP and MagiskManager.
Everything looks great so far. Thanks for this update OP and for those of you providing guidance.
I have G900VVRU2DPD1 with unlocked bootloader and twrp 3.0.0-0.
Can I flash the
Developer Bootloader Friendly/No Aboot No-Wipe Firmware:
G900VVRU2DQI2_G900VVZW2DQI2_G900VVRU2DQI2_HOME_No_ Aboot.tar.md5.zip ?
If yes, after flashing, will my bootloader remain PD1 unlocked? Is it OK to have unlocked PD1 bootloader with DQI2 firmware?
Will the TWRP and root be lost? And how I can get back TWRP? Using ODIN? If root is lost then can not use flashify to flash TWRP.
If using odin to flash TWRP, then I can just flash supersu zip in zip to get root back, right?
Thanks.
I guess this is slightly off topic since it's not about this specific firmware version, but here goes ~
How do you guys go about extracting firmware/modems from stock ROM updates?? It boggles my mind lol. I'm running a OP3T now, but am working on an old device (and I still have my old S5 too). Over the years it appears people are now able to do this process for most devices and make it flashable one way or another.
I wish I understood how this gets done (and possibly figure out how to do it myself). Would love a guide / video / brief explanation with terms I could look up if it's long & involved??
Thanks for the work!
purplepenguin said:
How do you guys go about extracting firmware/modems from stock ROM updates??
Click to expand...
Click to collapse
Stock ROM update is just a tar archive with files inside.
The names of the files are mostly self-explaining.
Use some tool to access the archive, like Total Commander or 7zip archiver.
bbsc said:
Stock ROM update is just a tar archive with files inside.
The names of the files are mostly self-explaining.
Use some tool to access the archive, like Total Commander or 7zip archiver.
Click to expand...
Click to collapse
Hmmm and then to make flashable??
purplepenguin said:
Hmmm and then to make flashable??
Click to expand...
Click to collapse
Just pack what you want into tar archive and it will be flashable.
No need to attach checksum.
But it's possible too.
Say, this tar-file is flashable:
Missing apps
TraderJack said:
and reinstalled Magisk from TWRP and MagiskManager.
Click to expand...
Click to collapse
Can I reuse the same Magisk from the "EMMC_15_VZW_QB2_STOCK_MAGISK_ROOT.zip" file from the other thread on how to unlock bootloader and root, or should I download the latest Magisk and MagiskManager?
Edit 1: Okay, I installed Magisk after updating to the latest QI2 and am rooted. However, I found that I'm missing busybox and safestrap. Do I have to reinstall both of those as well or can I just reinstall busybox?
Also, QI2 lost tether/hotspot capability as it reverted back to asking to purchase the service (I'm also on the old grandfathered unlimited plan)...is there a way to get it back as when on rooted QB2?
Edit 2: Did some more research while hiding at work...so now I know, having TWRP recovery is enough and just need to reinstall busybox.
Now still need to find a way to get hotspot capability back like when on the rooted magisk QB2...
Thanks
So I have a few questions about the android P beta program. I was wondering if anyone could answer before I opt into it
1) if I opt into I get ota updates which won't be Verizon variants so would I be able to jump back to Oreo?
2)would this allow me to unlock my bootloader possibly?
1) You should be able to go back to oreo by opting out of the beta and taking the subsequent ota from Google. Or you can manually flash a newer ota you downloaded from your computer. Must be a newer build than the the one you are on.
2) Almost certainly not. Unless there is some error, your bootloader will not be unlockable. You are not currently receiving "Verizon" builds. No such thing. Your device info is on a server side whitelist / blacklist. It has nothing to do with the build you have installed. That is my understanding.
dbrohrer said:
1) You should be able to go back to oreo by opting out of the beta and taking the subsequent ota from Google. Or you can manually flash a newer ota you downloaded from your computer. Must be a newer build than the the one you are on.
2) Almost certainly not. Unless there is some error, your bootloader will not be unlockable. You are not currently receiving "Verizon" builds. No such thing. Your device info is on a server side whitelist / blacklist. It has nothing to do with the build you have installed. That is my understanding.
Click to expand...
Click to collapse
Thanks so much for this information I'm gonna opt in for the hell of it
dbrohrer said:
1) You should be able to go back to oreo by opting out of the beta and taking the subsequent ota from Google. Or you can manually flash a newer ota you downloaded from your computer. Must be a newer build than the the one you are on.
2) Almost certainly not. Unless there is some error, your bootloader will not be unlockable. You are not currently receiving "Verizon" builds. No such thing. Your device info is on a server side whitelist / blacklist. It has nothing to do with the build you have installed. That is my understanding.
Click to expand...
Click to collapse
Im not sure i understood this properly, I've already unlocked the bootloader of my Verizon pixel 2 on 8.1, if I update to P, will the bootloader be locked back? Or I can update and still enjoy the unlocked bootloader?
Thanks!
daede86 said:
Im not sure i understood this properly, I've already unlocked the bootloader of my Verizon pixel 2 on 8.1, if I update to P, will the bootloader be locked back? Or I can update and still enjoy the unlocked bootloader?
Thanks!
Click to expand...
Click to collapse
If you unlocked the bootloader already, it will stay unlocked until you lock it via fastboot from your computer. Flashing firmware will not relock it. Don't worry, updating to Android p won't mess with that.
I'm really enjoying this beta so far. The new navigation gestures are cool. Nothing so far that makes me want to go back to 8.1.
dbrohrer said:
If you unlocked the bootloader already, it will stay unlocked until you lock it via fastboot from your computer. Flashing firmware will not relock it. Don't worry, updating to Android p won't mess with that.
I'm really enjoying this beta so far. The new navigation gestures are cool. Nothing so far that makes me want to go back to 8.1.
Click to expand...
Click to collapse
thanks so much! i've installed android p but i'm not able to root the phone.. i've installed magisk but it fails while patching boot.img.. any idea?
thanks again!
daede86 said:
thanks so much! i've installed android p but i'm not able to root the phone.. i've installed magisk but it fails while patching boot.img.. any idea?
thanks again!
Click to expand...
Click to collapse
What version of magisk are you flashing? You should be using the beta magisk. Looks like people are having some success rooting with version 16.4.
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Hope this helps.
dbrohrer said:
What version of magisk are you flashing? You should be using the beta magisk. Looks like people are having some success rooting with version 16.4.
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Hope this helps.
Click to expand...
Click to collapse
thanks so much!!
i'm trying to flash magisk using this tutorial https://forum.xda-developers.com/pixel-2-xl/how-to/guide-how-to-install-google-software-t3760535 but as soon as i launch fastboot boot [twrp image filename].img, it loads up twrp (i see the splash screen) but right after it crashed and reboot.. so i'm not able to flash magisk beta
is there a way to install magisk manager (beta) and being able to patch the boot.img without passing through twrp?
thanks again and sorry for all my questions!
daede86 said:
thanks so much!!
i'm trying to flash magisk using this tutorial https://forum.xda-developers.com/pixel-2-xl/how-to/guide-how-to-install-google-software-t3760535 but as soon as i launch fastboot boot [twrp image filename].img, it loads up twrp (i see the splash screen) but right after it crashed and reboot.. so i'm not able to flash magisk beta
is there a way to install magisk manager (beta) and being able to patch the boot.img without passing through twrp?
thanks again and sorry for all my questions!
Click to expand...
Click to collapse
Do you have the Pixel 2 or 2 XL? Are you booting with twrp 3.2.1-2 img?
dbrohrer said:
Do you have the Pixel 2 or 2 XL? Are you booting with twrp 3.2.1-2 img?
Click to expand...
Click to collapse
i have a pixel 2 verizon with bootloader unlocked trying to boot twrp-3.2.1-2-walleye.img. am i doing something wrong?
thanks again!
daede86 said:
i have a pixel 2 verizon with bootloader unlocked trying to boot twrp-3.2.1-2-walleye.img. am i doing something wrong?
thanks again!
Click to expand...
Click to collapse
That's correct. Just checking. You need to boot to twrp to flash magisk. There isn't another way that I know of. Maybe download twrp img again? I doubt its a corrupt download since you get the twrp splash screen, but its worth a try.
dbrohrer said:
That's correct. Just checking. You need to boot to twrp to flash magisk. There isn't another way that I know of. Maybe download twrp img again? I doubt its a corrupt download since you get the twrp splash screen, but its worth a try.
Click to expand...
Click to collapse
no luck
should i try to flash again the factory image?
or maybe opt out from androind p beta, install back oreo, root and flash android p without deleting my data?
daede86 said:
no luck
should i try to flash again the factory image?
or maybe opt out from androind p beta, install back oreo, root and flash android p without deleting my data?
Click to expand...
Click to collapse
You can boot into the OS right? Are you're platform tools the latest version?
Reverting back to oreo, rooting, and updating to p beta will either fail or wipe out root. You won't end up with p beta and root. Don't do that.
dbrohrer said:
You can boot into the OS right? Are you're platform tools the latest version?
Reverting back to oreo, rooting, and updating to p beta will either fail or wipe out root. You won't end up with p beta and root. Don't do that.
Click to expand...
Click to collapse
ok thanks again, really appreciated.
yes, at least i can boot and use my pixel with no problem, i'd only like to root it and restore my backup
daede86 said:
ok thanks again, really appreciated.
yes, at least i can boot and use my pixel with no problem, i'd only like to root it and restore my backup
Click to expand...
Click to collapse
I understand that. I am not sure whats going on then. Sorry.
i've solved the problem!! just to share, i had installed handbrake in my mac to share files via usb and i guess it caused some incompatibility issue.. i've just uninstalled it and i've managed to flash it properly!
I want to downgrade from one ui 5.1 to one ui 4.1, has anyone done this? How do i do it? I got twrp installe.
Use Odin to flash the older firmware. Keep in mind that the bootloader may have an anti-rollback to prevent this.
V0latyle said:
Use Odin to flash the older firmware. Keep in mind that the bootloader may have an anti-rollback to prevent this.
Click to expand...
Click to collapse
it does
TringQuack said:
it does
Click to expand...
Click to collapse
Then you won't be able to flash older firmware unless you flash a custom ROM zip in TWRP.
Hello everyone
Is there any solution to downgrade my a750fn under android 10 and bootloader u5 to android 9
Found a problem in Android 10
I need Android 9 U5
Please help me . I searched a lot, I did not find
I'm starting to lose hope
Is there a solution or should I stop searching?
Alihero123 said:
Hello everyone
Is there any solution to downgrade my a750fn under android 10 and bootloader u5 to android 9
Found a problem in Android 10
I need Android 9 U5
Please help me . I searched a lot, I did not find
I'm starting to lose hope
Is there a solution or should I stop searching?
Click to expand...
Click to collapse
There probably isn't a binary 5 android 9. If you can unlock the boooader, you can use the modified version of Odin and flash Android 9 regardless of what binary it has.
Droidriven said:
There probably isn't a binary 5 android 9. If you can unlock the boooader, you can use the modified version of Odin and flash Android 9 regardless of what binary it has.
Click to expand...
Click to collapse
Yes, the bootloader is unlocked. But what do you mean by "modified version of odin"
Thanks for your reply
Alihero123 said:
Yes, the bootloader is unlocked. But what do you mean by "modified version of odin"
Thanks for your reply
Click to expand...
Click to collapse
There is this:
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
And there is the "Prince Comsy" version.
Droidriven said:
There is this:
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
And there is the "Prince Comsy" version.
Click to expand...
Click to collapse
Now just flash the software, despite the difference of binary
Alihero123 said:
Now just flash the software, despite the difference of binary
Click to expand...
Click to collapse
Try it, it can only work and you get what you want or it fails to flash and nothing happens. If it ifails and won't reboot, flash your Android 10 firmware and it should restore your device then you can try again. You may or may not need to/want to try extracting the Android 9 firmware files and the Android 10 firmware files then putting together your own modified Android 9 firmware using different parts of the Android 9 and the Android 10 firmware, mixing and matching the bootloader, kernel and system .img files until you get a combination that works.
Droidriven said:
Try it, it can only work and you get what you want or it fails to flash and nothing happens. If it ifails and won't reboot, flash your Android 10 firmware and it should restore your device then you can try again. You may or may not need to/want to try extracting the Android 9 firmware files and the Android 10 firmware files then putting together your own modified Android 9 firmware using different parts of the Android 9 and the Android 10 firmware, mixing and matching the bootloader, kernel and system .img files until you get a combination that works.
Click to expand...
Click to collapse
Thank you very much my friend