So Canonical has demonstrated a prototype version of an environment for Ubuntu, based on the Xorg X Window environment, in which Android Apps can be run. For many folks that like to experiment and play around, for instance with the installation of Android to a computer, this is pretty exciting. After the project is optimized a bit more, I guess, the source code for the emulator will be released. Anyways what I'm getting at is that the article points out that a main purpose in this is to provide users the option to run Android programs in their current Ubuntu environment instead of a full-on Android installation to their machine. Seeing as the Android OS version for computers has a long ways to go before people can really install it and have full functionality without having to do a lot of work themselves, this has my hopes high. Here is the full article so you can stop listening to me babble and see what the guys at desktoplinux had to give us:
http://www.desktoplinux.com/news/NS7172257171.html
I know this is an old article, but I figured many people had never seen this and could use the bit of info.
I have searched lots on the subject of getting a full linux distro running on an android device most of which were really not really what I am looking for, almost everything I find on the subject seems to be some kind of hybrid solution where running linux side by side or on top of android but imo that just seems messy and may as well just be using andorid with it's apps than do that.
I ran into interesting information about modding chromebooks some of when were the similar side-by-side solution but others actually more what I was looking for, they enable legacy seabios while not enough to get windows installed seems to work fine to boot into linux and another guy had baked his own custom seabios replacing the chrome bios entirely.
my question, the atom tablets Im seeing pop up a few places are standard x86 right ? is it possible to either
1/run a modded sea bios similar to chromebook mods? then boot a stock ubuntu distro installation maybe from external storage?
2/or somehow have the existing/modded bootloader boot linux kernel/ubuntu install ?
can't help think if it were that simple maybe someone would have done it already but also thinking the hardware (drivers) are supported by android so they should be supported by linux right ? and if it is standard x86 can't be too much a stretch right ?
I don't own an atom tablet but was thinking it may be desirable (and add more use) if I could get a full linux distro installed and be a lot more affordable than full fledged windows based tablet.
anyway thanks
ps:that captcha is harcore
They are kinda standard. But they are not following PC architecture. They are so called Intel MID (Mobile Internet Device). On such devices you may find neither EFI nor ACPI. They have so called SFI which is a complete disaster. But Intel Merrifield is more or less supported by upstream kernel and Yocto (thanks to Intel Edison platform). You may try to gather information about those devices (official name of SoC is Intel Atom Z34xx).
Recently, I found a topic about installing Linux Debian on P500. This piqued my curiosity.
The question is:
Is there other alternatives than Android for P500?
Firefox OS, Windows Phone, I know, is impossible, I am looking for other systems.
Best regards
-Caio
Those Debian installs are most usually for a chroot run on top of android. Get a bash window, not likely a GUI would be able to run with our memory limitations.
Some of us would kill for a working version of Ubuntu touch, but everyone else with higher-end phones is still waiting for this.
i know it may sound newbish, but isnt possible for windows phone to tun on an android device (althought its not open source)? i fund some vague informations on google, so thats why im asking
Well if you get some flagship devices like nexus 4, nexus 5 you can enjoy firefox os, ubuntu and sailfish on them
Hi there, not sure if I'm on the right forum, but this seemed like the safest place to ask.
I have this project in my head that I would like to try, but I have no idea if it is even possible.
I'm currently doing a bachelors in computer science and as a way to learn, I would like to take on a big project.
As will soon become clear, I am a linux noob and know nothing about android development, but that's what I'm trying to change here.
Some time ago I bought a Chinese ereader (rebranded BOOX C67ML - using a rockchip rk3026 SoC, don't know how important that is -) and it's decent but it also kind of sucks. It runs android which overkill for a device like this if you ask me. When I look at the kindle or kobo ereaders, they have their proprietary os that is also Linux based, but much more streamlined without unnecessary features. This device doesn't even have wifi, so what am I going to do with full android on an e-ink screen? It only drains my battery more than it has to.
My question is, how feasible is it to create my own 'OS' for this device that is also Linux based and lightweight? I know that android devices can run gnu/linux in a sort of vm on top, but is it also possible to install this directly on the device? Wipe android and install a custom linux distro as you would a custom ROM.
Is this possible? Where do I begin? Any information on how the linux kernel underneath android functions and differs from a standard linux kernel would be great. I'm not asking for an easy solution served on a platter, I just want to know if it is possible and why or why not? Where do I go to learn about how to do this, point me in the right direction?
In searching around I came across postmarketOS, from what I understand they are trying to do something similar, only completely open source. No proprietary drivers for anything. For this project that is not a goal for me. If I can reuse parts of the android rom that it is running right now, I have no problem with that. Updating and keeping it up to date are not really a priority, I just need this to run a single application that works. Could also be that I completely don't understand what they are trying to do and I'm way off, but if so, please tell me what I don't understand and where I go to learn.
TLDR: Lightweight 'desktop' linux instead of android on an ereader, is it possible? Where do I start? Point me in the right direction please.
PS: If there is a better solution for this problem entirely, please do explain.
For anyone interested or with a similar idea, I'll just post what extra information I find here.
I stumbled upon Halium and Libhybris today. From what I understand, libhybris provides a compatibility layer between the android kernel and posix compatible applications. Halium uses libhybris and tries to create a common base that can be used to develop a non-android os for an android device. Please correct me if I'm wrong.
First off, I wanted to say I posted a few threads about this thing here asking questions about stuff I needed to get it working in the way I'd like and I'd want to thank you because I have made a lot of progress in getting it to be what I'd like it to be. I also don't know if this is the best forum to post this report because it's neither a question nor necessarily a tutorial but rather a summary and description of work already done so far, and especially because this device, while it sure runs Android (very well!) does not fit into any of the categories on this site neatly.
The story so far
This post concerns my experience working with the ITX-3588J, a board released just a few months ago by the Chinese manufacturer Firefly (or T-Chip Intelligent Technology Co. Ltd, based in Zhongshan) that is in the coveted mini-ITX form factor which means it can actually fit into a small-size desktop computer case and indeed has enough compute power to theoretically - and perhaps not so theoretically! - function as an honest desktop system with an ARM processor: namely the - also very new - Rockchip RK3588 system-on-a-chip.
About two months ago, I was looking into acquiring a new kind of computer to replace my somewhat longer on the tooth x86 machine that would be compact, low-power, and easy to transport while also being a fully capable desktop. And I certainly didn't want Apple. I had seen some very small form x86 desktops before, but I also knew there were many boards - like Raspberry Pi - that featured the ARM processor. Not content with the Pi, which is still very weak for this application at least when compared against modern software, I wanted to see if there was something else by now in a similar vein, and when I saw this board I thought it was an amazing option, esp. given I have not yet found a peer. Many ARM single-board devices exist but this is the only one I've found so far that looks to be in a proper desktop form factor and sporting a processor powerful enough to work at that level.
So I got the board, a case, and - noting it had SATA ports - a cheap 250 GB SSD, and put it all together ... and fired it up! And to my surprise, it booted up Android! Which was a real shocker because I generally thought this'd be like another PC board, not having had much experience with this ecosystem beyond phones, so that it would just give the usual "OS not found" stuff. Nope - pre-loaded on the board. Very minimal, very bare-bones though, not even the Google Play and similar essentials required for a usable Android experience. Yet with the little bit I had, I couldn't help but notice it was extremely fluid, responsive, and snappy, moreso than my aging 2018 era x86 box. Moreover, it was very, very interesting (and exciting!) to see Android booted onto a full-size monitor screen like Linux or Microsoft Windows - and actually and surprisingly, to see that it didn't look and feel all that bad!
However, of course, I wanted more. First, I wanted a fully-featured installation of Android. Second, I wanted to run Linux on it - especially given that, a short while later, I found that the board manufacturers were offering a stock Ubuntu 20.04 to be installable to it. Although, in the early stages, I didn't know how to do this at all, and then soon after learned how to reflash the embedded MMC chip to change the OS. And I did so, trying the Ubuntu and finding it also very performant, but not liking either that it was not quite the newest version but also more that it was mutually exclusive with Android - so far.
And that would begin a long - and at many times frustrating, especially given how much information out there is not at all tuned to a device like this being pressed into this application - learning journey toward exploring topics as diverse as how ARM processors and SoCs work under the hood, U-Boot, kernel features, the Firefly-Rockchip developer kit - and having to essentially single-handedly discover many of that kit's ins and outs given there was pretty much no documentation - and more, ultimately leading to where I've got it to now.
What it can do at this point
And that is, right now, I have it sitting here, loaded up with the stock Android 12 and Ubuntu 20.04 - with the former on the eMMC and the latter on the SSD hard drive. On the Android side, Google Play is now loaded and functional, though Google Chrome is not (it crashes with a "Telephony is null" exception for some reason, which seems to suggest for some reason it's trying to act like it's on a phone but isn't). Zoom - an app that I really, really wanted to have (and why I wanted to keep Android around on it) - works and works smoother and cleaner than my 2018 x86 Linux clunker. On the Ubuntu side, though, things are not yet coming - mostly because of seeming inability to use U-Boot to boot from the SSD. I managed to install GRUB, and given that Firefly's generous board SDK provides the full U-Boot source code was able to recompile it with the necessary "bootefi" command enabled which is not present in stock, but nonetheless alas this U-Boot seems to have its SATA support bugged or incomplete, because it would crash immediately upon trying to initialize that subsystem.
Where I'd like to go with it
Obviously, full dual boot of Android and Ubuntu, so getting U-Boot to boot the GRUB resident on the hard drive, is the biggest issue so far, and that means investigating whatever is the problem (or not?) in its SATA subsystem. Getting Google Chrome working on Android is another important step. Moreover - though it would cost extra money that I do not have right now - there's the very interesting possibility, owing to the fact that it has a built in M.2 slot on the board, and alluded to in the title - that the device could be made to act as a cell phone. And finally, the possibility of upgrading to a newer version of Ubuntu (ideally 22.04) - however from what I know so far, it looks like this will have to wait because the stock Linux kernels do not currently support the RK3588 fully - though I'd suggest the Linux kernel developers really should take a look at the SDK that came with this thing because it has lots of code in it including for the kernel, all under GPL.
Final note
One of the most interesting things I've learned from this project, and mentioned earlier, is just how well Android seems to work as a desktop OS. While there have apparently been some attempts to port it to x86, this is perhaps one of the first devices that is desktop-workable and which runs it natively. And one of the things I find that's nice about it is that ironically, because all the apps are designed for small screens, when they are run on a very big screen (and this monitor is not "very big" even by today's monitor standards, being a used and earlier LCD type), they are extremely easy on the eyes and have minimal UI clutter when compared to a typical desktop app on most Linux WMs and on MS Windows.
If you want to know more about the details, or anything else, feel free to ask any questions you might have!
UPDATE:
I believe I may have found an easier way to dual-boot Linux with Android, and that consists of configuring a custom ROM that will put both kernels, and GRUB, on the board's eMMC, while the rootfs for both OSes is placed on the hard disk. Will be seeing how it works.
UPDATE:
I have almost completed the custom ROM! I have now both Android and at least the base system for Ubuntu 20.04 (Kernel 5.10.66) bootable with Android now storing user data on the hard drive; though I'm still running into some hardware initialization issues in the latter that are keeping me from actually installing the desktop system. With regard to the Ubuntu system, there is some interesting issue in that for some reason the provided SDK kernel, which I had to rebuild, seems to build more Android-like because it wants to look in "/vendor" for some things related seemingly to the networking facilities, and it is possible this is preventing me from bringing up wifi, which I need in order to download the rest of the system.
But lots of progress overall - it seems that a full-fledged ARM desktop running simultaneously Android and Ubuntu is within reach to be wrung from this board!
Ignore my request for an update in another post. Seems you like you moving along. I don't need dual boot, just a working Android 12 with GPlay and Chrome. Did you get Chrome to work?
mebalzer said:
Ignore my request for an update in another post. Seems you like you moving along. I don't need dual boot, just a working Android 12 with GPlay and Chrome. Did you get Chrome to work?
Click to expand...
Click to collapse
Thanks. Yeah, I want to say that I have pretty successfully gotten Android 12 working on it for sure, but Ubuntu is proving much more difficult due to graphics support issues, and I'm not sure if it will be possible until RK3588 is supported in the mainline Linux kernel tree which is still something under development. And yes! I got Chrome to work Everything works, actually - it's great as an Android system, though obviously Android is kinda funny to use as a desktop OS. I am wondering if I can't get a "pseudo" Linux using something like Linux Deploy in lieu of running it natively, at least until the kernel development catches up with this new processor.
(FWIW, I'm posting this post from that machine while it is running A12. )
Good to see someone else is interested in it, though. What are you planning on using yours for?
Insofar as getting Android 12 to work w/GApps - it depends on if you want to do it purely on the eMMC or you want to also put user data on an attached hard drive like I did. In either case, the best option, I feel, is to create a custom ROM - I could provide custom ROMs for it for download, but don't know because of Google's licensing conditions around the GApps and have heard of people getting in trouble with Google for distributing custom ROMs for phones that have GApps in them. You basically need to unpack the stock Android image, unpack the "super.img", then load the apps from a package like NikGApps into the "product" partition (NOT "oem" - that was a big mistake), then repack everything and flash to the eMMC again. You will need the board SDK from Firefly for all this as it has the custom ROM-packing and flashing tools.
Alternatively, it is possible to manually install the NikGApps GApps using the Android console - as it's a fully unlocked system, obtaining root access is trivial: just put it into Developer mode and you will find the root access in the "Developer options..." menu under "System".
Shimmy99 said:
Insofar as getting Android 12 to work w/GApps - it depends on if you want to do it purely on the eMMC or you want to also put user data on an attached hard drive like I did. In either case, the best option, I feel, is to create a custom ROM - I could provide custom ROMs for it for download, but don't know because of Google's licensing conditions around the GApps and have heard of people getting in trouble with Google for distributing custom ROMs for phones that have GApps in them. You basically need to unpack the stock Android image, unpack the "super.img", then load the apps from a package like NikGApps into the "product" partition (NOT "oem" - that was a big mistake), then repack everything and flash to the eMMC again. You will need the board SDK from Firefly for all this as it has the custom ROM-packing and flashing tools.
Alternatively, it is possible to manually install the NikGApps GApps using the Android console - as it's a fully unlocked system, obtaining root access is trivial: just put it into Developer mode and you will find the root access in the "Developer options..." menu under "System".
Click to expand...
Click to collapse
Thanks I will keep this in mind. See my reply to you other reply on another post as well.
I would to run gplay as well please send me instruction the nikapps github doesnt say nothing