Hello i am new here i have some questions plz.clear my mind issue is i have galaxy s7 g930p when i dial*#1234# it shows AP, CP G930P AND CSC G930F what is this??? I want to update oreo which firmware should i use i am in pakistan and already use os marshmallow
Boot into download mode (Power + Home + Vol Down) and check what model number it says you have there.
Then download the firmware specifically for that model and nothing else.
Thanks for reply... in download mode its shows g930p and also in settings same model name and also back on phone side same but in recovery mode shows g930v
Here is some detail...
In the Downloads mode SM-G930P is displayed,
in the Phone Info also SM-G930P,
in the manufacturer "Samsung / Verizon",
product code "Not Active",
Original CSC code is empty,
CSC firmware code VZW,
active VZW firmware code,
available CSC codes are empty,
SCS country USA / HK,
Bootloader version G930PVPU4APL6,
PDA version G930PXXU1BPIA,
version CSC G930FXXU1BPIA,
radio module version G930PVPU4APL6.
Which model firmware should i download
Download mode is the only value that can't be changed by modifying the firmware, so it's your true model.
The G930P is the US Sprint S7 model running Snapdragon, so you can use any Snapdragon firmware with Odin (G930U/V/T/P) but don't attempt to flash anything Exynos as it will brick your phone (G930F/FD/W8/K)
G930U is the carrier unlocked generic firmware, so the best one to use if you don't want bloat etc.
Thank u so much can i now install latest update of g930u? in odin fill all boxes with g930u files also csc g930fxxu1bpia with g930u file?
Thank you so much sm-g930u firmware with oreo now working in my sm-g930p no any issue here thanks
Hello, I have an unlocked Galaxy Note 20 Ultra from Verizon. I am wondering if it is possible to fully convert this device to work fully with TMobile I was specifically wondering if it's possible to use TMobiles 5G Network on this device. I have flashed the U1 Firmware to the device but it never showed me an Option to choose my carrier or anything like that, and even though the Signal shows 5G whenever I turn a speed test or view the cell info it pops up as LTE
You need to change your device CSC to TMB and flash TMB U firmware, not U1.
You device currently shows VZW/VZW/VZW in your screenshot.
It should read TMB/TMB/TMB, or at least VZW/VZW/TMB.
The SIM card itself will determine what network you have access to.
Be careful though as you have now flashed newer firmware with the new version 2 bootloader.
So you can only use firmware with that bootloader version. No going back.
rjohnstone said:
You need to change your device CSC to TMB and flash TMB U firmware, not U1.
You device currently shows VZW/VZW/VZW in your screenshot.
It should read TMB/TMB/TMB, or at least VZW/VZW/TMB.
The SIM card itself will determine what network you have access to.
Be careful though as you have now flashed newer firmware with the new version 2 bootloader.
So you can only use firmware with that bootloader version. No going back.
Click to expand...
Click to collapse
If you change ur CSC from VZW to TMB, then it will read TMB/TMB/VZW in your screenshot.
You can only change to TMB/TMB/TMB if you root your phone .
For more details, visit https://forum.xda-developers.com/t/...bands-and-services-5g-low-band-on-u1.4182293/
Please note, some codes in original post don't work for some, with latest 10.1 Update.
Using Sammobile, I've seen U1 firmware with a T-Mobile CSC. That way you won't have all the T-Mobile apps or boot screen.
Hi!
I have a Galaxy A12 model SM-A125U with TMK region csc limited to Metro T-mobil
I would like to flash the phone with a firmware for the unbranded phone XAA region CSC.
The new model firmware is SM-A125U1_XAA
I don't know if I will brick the phone since it is network locked to Metro Tmobil.
The unbranded model # has a "1" after the model # but I am hoping it is the same model only unbranded.
Any suggestions or knowledge shared will be appreciated.
I apologize if I posted in the wrong place.
Thanks
flaco#1 said:
Hi!
I have a Galaxy A12 model SM-A125U with TMK region csc limited to Metro T-mobil
I would like to flash the phone with a firmware for the unbranded phone XAA region CSC.
The new model firmware is SM-A125U1_XAA
I don't know if I will brick the phone since it is network locked to Metro Tmobil.
The unbranded model # has a "1" after the model # but I am hoping it is the same model only unbranded.
Any suggestions or knowledge shared will be appreciated.
I apologize if I posted in the wrong place.
Thanks
Click to expand...
Click to collapse
In theory, it "should" be safe as long as the binary of what you are flashing is not lower than the binary what is currently installed on your device. Keep in mind that flashing the X firmware will not have any effect on unlocking the device and will not allow you to activate the device on a different network.
Thanks Droidriven,
I don't know how to check the binary of the file nor what it is.
Can I flash the firmwareto my phone with odin even though my bootloader isn't unlocked?
Dears,
I have S908E 22 Ultra, but my country always get updates very late. So the question is if I flashed other country firmware without changing CSC , will I still get OTA updates ?
Yes you will get but those OTA updates will be from that other region only
Hi, I have S908E 22 Ultra, I want to flash the USA or SM-G9880 firmware (or any snapdragon firmware) is OK ?
Also I changed the CSC code but the last line (country of production not change) example: COO/COO/COO after change CSC: XID/XID/COO. It's possible to change the country of production CSC without root?
Can anyone help with the info if can do it or not, only the last CSC (country of production) other CSC I changed with SamFw FRP Tool but like I said I can change the last 3 letters!
Thank you!
Hello, i am using a samsung galaxy S22 ultra(SM-S908U)....
It is a usa unlocked piece currently using it in india and i am unable to recieve OTA updates since the day i bought it...the last security patch update it shows of is of May 1,2022....it shows it is running latest software version when tried to update the phone...
Service provider software version shows csc of the device as GCF,/GCF,GCF/XAA.
Full model number of the device is SM-S908UZKEVZW
Can anyone tell me how to get an ota update on this device and i also want to change its csc code to indian csc code so is it possible to do so without tripping the knox or bricking the phone....
pushkar0501 said:
Hello, i am using a samsung galaxy S22 ultra(SM-S908U)....
It is a usa unlocked piece currently using it in india and i am unable to recieve OTA updates since the day i bought it...the last security patch update it shows of is of May 1,2022....it shows it is running latest software version when tried to update the phone...
Service provider software version shows csc of the device as GCF,/GCF,GCF/XAA.
Full model number of the device is SM-S908UZKEVZW
Can anyone tell me how to get an ota update on this device and i also want to change its csc code to indian csc code so is it possible to do so without tripping the knox or bricking the phone....
Click to expand...
Click to collapse
It is not possible to change CSC without tripping Knox. You must unlock the bootloader to change the CSC.
V0latyle said:
It is not possible to change CSC without tripping Knox. You must unlock the bootloader to change the CSC.
Click to expand...
Click to collapse
I want to change my csc to indian csc (ins)....is it possible to change it from gcf and if yes how?
pushkar0501 said:
I want to change my csc to indian csc (ins)....is it possible to change it from gcf and if yes how?
Click to expand...
Click to collapse
Unlock the bootloader and use Odin to flash OXM firmware. OXM is multi-CSC, so you should be able to change region to India.
Don't forget you can use the Search function to look for solutions to questions that have been asked many, many times before.
V0latyle said:
Unlock the bootloader and use Odin to flash OXM firmware. OXM is multi-CSC, so you should be able to change region to India.
Don't forget you can use the Search function to look for solutions to questions that have been asked many, many times before.
Click to expand...
Click to collapse
My device has OYN multi-CSC and can't find anything about it on internet clearly which can solve my doubt...have shared Screen shots above
pushkar0501 said:
My device has OYN multi-CSC and can't find anything about it on internet clearly which can solve my doubt...have shared Screen shots above
Click to expand...
Click to collapse
Really?
I don't think you tried hard enough
First result
V0latyle said:
Really?
I don't think you tried hard enough
First
Click to expand...
Click to collapse
Have seen all those results already....my main concern is can i install INS csc on OYn multi-csc.....coz i didn't saw any particular search results for OYN multi-csc all were foe OXM only
pushkar0501 said:
Have seen all those results already....my main concern is can i install INS csc on OYn multi-csc.....coz i didn't saw any particular search results for OYN multi-csc all were foe OXM only
Click to expand...
Click to collapse
If you unlock your bootloader, you can install any CSC you want, so you'd just download INS firmware and flash it using Odin.
Or, you can flash the OXM firmware and simply change the region to India, as I stated in my first reply.
Ok i got that now second major issue is that i cannot unlock my bootloader as my developers option is not showing oem unlocking
no need to unlock your bootloader to change the CSC, just use this application to do so
SamFw Tool 4.7.1 - Remove Samsung FRP one click
Hi Today, we introducing SamFw FRP Tool version 4.7.1 Main function: Remove FRP with one click Change CSC with one click Remove FRP for new se...
samfw.com
and you can check the part on this post on how to change the csc
Enable & Select Bands thru Dialer (S22 Fam) /CSC CHANGE (S22 & MORE)
***Tested on S908U & S908U1*** But not limited, to those specific models. S22 Family should also be compatible as well...as the NEW FOLD 4. Thanks @Abaddon BAND SELECTION: To ENABLE all bands, please do the following: (See pictures attached...
forum.xda-developers.com
Please note you can't change it to Indian CSC, only US based CSC since your phone is from the US
Thankx
PapaDocta said:
no need to unlock your bootloader to change the CSC, just use this application to do so
SamFw Tool 4.7.1 - Remove Samsung FRP one click
Hi Today, we introducing SamFw FRP Tool version 4.7.1 Main function: Remove FRP with one click Change CSC with one click Remove FRP for new se...
samfw.com
and you can check the part on this post on how to change the csc
Enable & Select Bands thru Dialer (S22 Fam) /CSC CHANGE (S22 & MORE)
***Tested on S908U & S908U1*** But not limited, to those specific models. S22 Family should also be compatible as well...as the NEW FOLD 4. Thanks @Abaddon BAND SELECTION: To ENABLE all bands, please do the following: (See pictures attached...
forum.xda-developers.com
Please note you can't change it to Indian CSC, only US based CSC since your phone is from the US
Click to expand...
Click to collapse
Can you suggest best US based csc with regular ota updates as i am not getting ota update on gcf....stuck on may security patch update....
Can GCF based devices get ota updates i read it in someone's post that they can be only updated via odin or sideloading
GCF gives more LTE and 5G bands support so maybe that's why your phone has it set on that. You can change it to XAA as it's bloatware free and gets regular updates.
PapaDocta said:
GCF gives more LTE and 5G bands support so maybe that's why your phone has it set on that. You can change it to XAA as it's bloatware free and gets regular updates.
Click to expand...
Click to collapse
Wanted to ask it just out of curiosity....there is no way to change my csc from USA version to Indain version....by any means?
I don't think this is possible... and that's why Samsung has different variants for different countries ...
Okkk....
But by any chance u get to know that it can be changed to Indian csc please do let me know it will be very helpful
Thinking of flashing this firmware update via odin....device model number : SM-S908UZKEVZW
Region:VZW
OP, Are you sure it is an "unlocked" version? Based on he last three charactors of the model# you provided says it is a Verizon branded phone. Yes, technically it was unlocked after 60 days, but since you are not connected to Verizon's network, that may be the reason you are not getting OTA updates.
SM-S908UZKEVZW | Galaxy S22 Ultra 256GB (Verizon) Phantom Black | Samsung Business
Discover the Samsung Galaxy S22 Ultra 256GB (Verizon) in Phantom Black (SM-S908UZKEVZW), the phone that lets you work and collaborate on the go in ways you never thought possible.
www.samsung.com
As for unlocking the bootloader, none of the US variants' bootloaders are unlockable.
I changed my csc code from GCF to USC and now in sim card manager settings it is showing only sim1 option and esim no sim2 option is available