I was researching and saw that one can rectify this error with an " Updated " Samsung Account App / apk.
How do I Flash my phone with the updated Samsung Account apk via a rom on Odin or any other method in order that it will accept my VALID Credentials and not give me this error please: " Processing failed "
Phone is currently Factory reset and stuck on the boot menu " Samsung Account " FRP Lock - and will not accept my Correct info
Related
Hi,
Hope this is the right place to ask...
I have LG Optimus one (p500) and I tried to upgrade it to Android 4.4.2 KitKat CM11 ROM.
I used this guide:
http://www.ninjaromeo.com/update-lg-optimus-one-kitkat/
But since the link to the rom is down - I tried it with mukulsoni cm-11-P500-Ver10.zip rom from here:
http://forum.xda-developers.com/showpost.php?p=51341582&postcount=1154
I'm not sure is it's relevant - but in the ninjaromeo guide it was stated to:
Do the following: “Wipe Data/Factory Reset > Yes”
Do the following: “Wipe Data/Factory Reset > Yes”
Do the following: “Advanced > Wipe Dalvik Cache > Yes”
Do the following: “Mounts and Storage > Format /system > Yes”
but in mukulsoni guide is was stated:
DON'T WIPE ANYTHING (data/factory reset + wipe cache partition+wipe dalvik+ format system)
but since I used ninjaromeo guide I did the wipe as instructed....
anyway - the installation finished o.k. and the device rebooted and i got this message:
Fastboot mode started
udc_start()
--suspend--
--reset--
--portchange--
--reset--
--portchange--
stall get_descriptor 128 6 1006 0 18
fastboot: processing commands
the phone was discovered by my windows - and some drivers ware installed.
after long long wait i disconnected the the phone from my computer and re connected it back, I got this message:
--suspend--
--suspend--
--reset--
ep1/out fail nfo=40 pgo=74000
--portchange--
usb_read() transaction failed
--reset--
--portchange--
fastbootops!
fastboot: processing commands
but nothing happen.
I tried to re install the rom - this time without the wipe part (though I guess it is too late since I already did it the first time) - and again I got to this message:
Fastboot mode started
udc_start()
--suspend--
--reset--
--portchange--
--reset--
--portchange--
fastboot: processing commands
should it take so long to complete - or is it because something I did wrong?
what should I do now?
Thanks!
=======================================
Hi again,
So I upgraded the CWM Recovery to v6.0.4.6 from here:
http://forum.xda-developers.com/showthread.php?t=2564767
and installed the SDK on my PC from here:
http://forum.xda-developers.com/showthread.php?t=1007244
http://www.oracle.com/technetwork/java/javase/downloads/index.html?ssSourceSiteId=otnjp
then I have Installed ClockWorkMod through ADB:
http://forum.xda-developers.com/showthread.php?t=852905
then installed again the new rom from mukulsoni cm-11-P500-Ver10.zip rom from here:
http://forum.xda-developers.com/showthread.php?t=2589303
so now the phone is restarting - but a get:
"unfortunately, google play service has stopped"
and then:
"unfortunately,the process android.process.acore has stopped."
and:
"unfortunately,kitkat launcher + has stopped"
after that the phone reached the wallpaper with the lock etc - but after few seconds the phone reboot over and over again....
any idea?
Thanks.
=======================================
o.k.
did recovery and then "wipe data / factory reset."
got:
"formatting /data
formatting /cache
formatting / sd-ext
formatting /storage/sdcard0/.android_secure
data wipe complete"
then reboot system now. - and the phone work without a problem (almost) -
now i get no signal (although the sim and network were o.k. on the previous rom).
when dialing a number i get:
"mobile network not available."
in: settings->more->mobile networks->network operators-> choose automatically
I get error: "can't connect to this network right now . try again later"
in "search networks " I get error "error while searching for networks"
i'm trying to update to 10.3 via OTA - will it help?
any idea?
Thanks.
===========================================
so the problem was with the baseband.
i used this to installed a new baseband :
http://forum.xda-developers.com/showpost.php?p=15250036&postcount=1
and then re install the new rom all over again - now it's working fine!!
But there is a problem again...
Now i cant connect to the google play / add new account to the phone etc...
i get error:
"there was a problem communicating with google servers/ tray again later"
installing the Google Play Store 4.6.16 did not help - still the same error.
can you help??
Did you get updated to 10.3? are you still having this issue? I'm using this ROM without any of the issues you've described.
If you had posted this on the thread where you got the ROM from, your question would've been answered long time ago.
Sent from my LG-P500 using xda app-developers app
I followed the description for rooting my phone (http://forum.xda-developers.com/showthread.php?t=2364980)
So I installed the recovery-clockwork-6.0.3.7 - serranoltexx.tar.md5.
After that I rebooted the phone into recovery mode and choose,, apply update from external storage,, and afteer that I choose GT-9195_Rootkit_v2.zip. Then I see E: signature verification failed. What am I doing wrong?
Here's Instructions i made this solution i think it work for all android phones !
1. Enable Developer options and check "OEM Unlocking" (tap 8 times build number in phone info)
2. Go to GOOGLE PLAY STORE, search for DisableService App after that install it
3. Open This APP then go to tab SYSTEM
4. Search for Google Play Services
5. Search for Frp Uncheck Frp Service !
5A. Allow Root Access!
5B. Uncheck FrpUpdateIntentService
6. Now You Have FRP Disabled (YOU CAN'T HAVE ADDED GOOGLE ACCOUNT WHILE DISABLING, THIS INCREASE CHANCE OF BRICKING DEVICE!)
7.After it, you cannot add google account via settings it will say Application "name" Has stopped
8.Download QuickShortCutMaker
9.Search for "Manager"
10.Open IT
11. Search For Enter Email and Password or something
11A. IMPORTANT DON'T SELECT SECOND, THERE'S 2 OPTIONS MAKE SURE YOU HAVE SELECTED 1 ONE
12. Open ... Tab then select Login Using Browser or something
13. Write email address then password, Wait for logging in Window will close and you will go back to quickshortcutmaker
FINISHED ! Your Phone is now FRP Unlocked With Google Account ! You can check FRP Lock Status with google account in DownloadMode , Enjoy Your Custom Roms etc
No more Custom Binary Blocked By FRP Lock
you can have custom recovery with google account, IMPORTANT: don't delete your google account ! if you delete you need to go back to 8. section !, have fun -Tested On My SM-G531F Samsung Galaxy Grand Prime lollipop 6.1.1 Rooted Unlocked Now FRP Unlocked-- Tested 5 times! Warning:You need to do same if you install Custom OS !
NOTES ! READ IT !
You Need Rooted Device!
You don't need Check USB Debugging
You don't need custom recovery !
i haven't seen anywhere way to disable FRP Lock with google account (after uninstall app disableservice frp will re-enable make sure you installed it to \system\app If you not you can't have custom OS !)
-------------------------------------------------------
PRESS THANKS BUTTON IF MY SOLUTION WORK
root access??
I get caught up at number 5. I get a pop-up saying "failed to gain root access"
what do I do ??
Summary: I need to access the files on relatively old model of a Maxwest tablet using Android OS and do not have the unlock pin code #. It belonged to someone special who used it for pictures, but it also contains important files that our family and I wish to access; however, we cannot determine the pin code # and we are limited on available recovery options.
The details regarding the current situation and "requirements" are as follows:
- #1 requirement is to not delete the existing files, which means no factory reset please
- There is no email associated to it meaning:
1) I am unable to use a "Forgot my Password" feature
2) I am unable to Android Device Manager
- USB debugging is Off and I'm unable to access it when plugged from laptop to tablet
- I've attempted to use .zip files from multiple sources including ones from the hyperlinks below when using the Android System Recovery option to "Apply Update from External Storage"
1) http://forum.xda-developers.com/showthread.php?t=2227103
2)https://sourceforge.net/projects/androidpatternunlocker/?source=typ_redirect
When I restart up the device under the Android System Recovery screen, I see the following information (it is condensed a little bit)
"Android System Recover <3e>
rk312x-eng 4.4.4 KTU84Q eng.lq.20150808.124117 test-keys"
...
"reboot system now
apply update from ADB
apply update from external storage"
...
"Recover system v4.4.2"
After trying to use the "apply update from external storage" with a microSD card containing the zip files from the links above, I receive the following error message:
"-- Install /mnt/external_sd ...
Finding update package...
Opening update package...
Verifying update package...
E:footer is wrong
E:signature verification failed
Installation aborted."
Please Help!!
Hi there and welcome to assist,
Unfortunately there is nothing about your question/device on XDA forum. Try a Google search first.
You'll have to create an account to post in the main forums if you have any other questions.
Good luck
I have such situation with my Huawai P30
$ fastboot oem get-build-number
...
(bootloader) :ELE-L29 9.1.0.156(C891E6R2P2)
At this time have:
Your device has failed verification and may not work properly.
(1) Your device need to be restored
(2) Press Volume Up key up to 3 seconds or Press Power key to enter erecovery to restore your device
(3) Your device will stop start if there is no operation
Trying install 10.1.0.150(C431E22R2P5) from here without success ((( with error:
Software install failed!
Incompatibility with current version. Please download the correct update package.
In eRecovery menu do
1) "Update and recover system"
2) "Download update and recover"
3) "Connecting to Wi-Fi network"
4) Retrieving package information...
getting error:
Get package info failed
Device information:
9.1.0.156(C891E6R2P2)
But what is correct for me?..
Is it possible move from C891 to C431?
...continue gather info about phone
C10 - russia
C431 - is Europe
what is C891? seems something like demo
I try to install firmware from file with name
Huawei P30 ELE-L29 hw eea ELE-L29 11.0.0.156(C431E10R2P3)_Firmware_EMUI11.~R2P3)_Firmware_EMUI11.0.0_05015RBQ [Password=9qr0FDMTxyi1Hmtd01oy].rar
At this moment this is only one firmware which accepted by the phone, but after restart I got error above
Also I found video guide about testpoint and this
And next question is - am I really need it?.. Can someone explain?
What is software testpoint?