Related
The script is now completely rewritten and a lot easier to use.
This is the general walkthrough for this script, if you have more questions than this answers please ask in this thread.
Download and unpack the script to the root of your sdcard, the easiest way to do this is to download it to the root of the sdcard and do the following:
1. start terminal session
2. cd /sdcard
3. tar xvf MakeLoopROM-Android-V11.tar
===============================================================================================================================
NEW! READ THIS! - The original ROMs and Packages are now stored in /sdcard/MakeLoopROM/original-roms and /sdcard/MakeLoopROM/original-packages. Copy the ROMs and packages
that you want to convert into those folders!
===============================================================================================================================
Ok, once you're done there you're ready to start the script, it's now completely menu driven.
1. start terminal session
2. cd /sdcard/MakeLoopROM
3. sh startup
That will start up the menu, for a new ROM work your way from 1 - 4 to make your first loop ROM, at the end of 4 it will be ready for installation, for upgrades that install into
existing loop files (that you have made once with step 1) start at step 2.
The menu options and how they work:
1. Make system, data or both loop files
This option will allow you to do just what it says, make the system and data images you'll install your ROM into, it's very
straightforward but i'll give a brief summary of how
it works.
"Do you want to make an image file to hold the system for this ROM? (not neccessary if it's an upgrade from a previous ROM) Y
for yes N for no."
Pretty straightforward, if you don't have a system loop file enter y for yes, if you're going to upgrade then running this
step is completely unneccessary but since you have
chosen to run it, press no.
"What do you want to call your system image? (give it a name you'll remember, like cm-7-system for a cm-7 loop install)"
Name the system loop file, call it whatever you want but make it something relevant to the ROM or you'll end up wondering what
that file is for when you stumble upon it at a
later time. it'll be stored under /multiboot/system-loop-files when it's done.
"What size do you want your system image to be (in MB's)? (WARNING: if you make it too small your ROM +other packages like
gapps might not fit, make it 250)"
The size of /system for the loop ROM, read the thread you downloaded the ROM from to find out what size is ok, i just use 250
for everything in case i want to reuse it with full
at a later time.
"Do you want to make an image file to hold the data for this ROM? (not neccessary if it's an upgrade from a previous ROM or
you want to share a data image with another ROM)
Y for yes N for no."
Same as with the system loop file, if you don't have one, you'll want one, if you're upgrading you shouldn't be running this
step but there is another time when you want to say
no to this, when you want to share a loop file with another installation (not with NAND ROMS). Like for example if you want to
share the data partition between CM-10 and PA-JB.
"What do you want to call your data image? (give it a name you'll remember like cm-7-data for a cm-7 loopinstall)"
Same as for the system loop file, just name it something relevant, the name is of no importance to it's function.
"What size do you want your data image to be (in MB's)? (This file will hold all of your data, don't skimp on the size)"
How many apps do you plan to install? 10 - 50 - 500?
Make it a size that you can live with and that will fit on your sdcard, it really depends on how many apps you'll install.
2. Make a Loop ROM
It's exactly what it says, this will make your loop ROM ready for installation.
"Available ROMs:"
just enter the number that's next to the ROM you want to convert, if it's not there it's because you didn't copy it to /sdcard
/MakeLoopROM/original-roms, you can do so now and
hit r to refresh the list.
"You previously created the system loop file [nameofyourfile], do you want to use it for this ROM? (y/n)"
You'll only get this question if you created a system loop file by going through step 1. If you did so and that's the file you
want to use (check the [nameofyourfile]) then
answer y for yes, otherwise you answer n for no and the following question comes up.
"Available system loop files:"
This choice will only come up if you answered no to the previous question or didn't make your system loop file with the script
in step 1 during this session. Anyways, just enter
the number next to the file you want to use as a system loop file.
"You previously created the data loop file [nameofyourfile], do you want to use it for this ROM? (y/n)"
See the system loop file above, this is the same but for the data loop file
"Available data loop files:"
See the system loop file above, this is the same but for the data loop files
Do you want this installation to format the data image used with this ROM?
Answer Y for yes if it's a new installation and N for no if you are upgrading
and want to keep the data on the data image. (Say yes if you would run wipe
data/factory reset in recovery if this was a normal install)
Y if this is a new install or you're reusing an old data loop file that you want to wipe.
when done hit enter to get back to the menu.
3. Make a loop package (such as gapps)
This, like it says, is for converting non-rom packages (not kernel packages though) such as gapps or bravia or what have you.
"Available packages:"
type the number that is next to the package you want to convert, if the package isn't there you didn't copy it to /sdcard
/MakeLoopROM/original-packages
"You previously created the system loop file [nameofyourfile], do you want to use it for this ROM? (y/n)"
You'll only get this question if you created a system loop file by going through step 1. If you did so and that's the file you
want to use (check the [nameofyourfile]) then
answer y for yes, otherwise you answer n for no and the following question comes up.
"Available system loop files:"
This choice will only come up if you answered no to the previous question or didn't make your system loop file with the script
in step 1 during this session. Anyways, just enter
the number next to the file you want to use as a system loop file.
Repeat No. 3 for all your packages
4. Make (or update) NAND boot image.
This will read the information in your boot partition and store it as boot.img under /sdcard/multiboot so you can boot back to
your NAND installed ROM by running step 6 or
flashing nandboot.zip (also stored under /sdcard/multiboot) from cwm.
Run this every time you update your NAND ROM so the boot.img is fresh.
"This script will update your nand boot.img in the multiboot folder to the version of boot.img you're currently running, make
sure you're running the updated ROM and not
a loop ROM before hitting Y for yes here. If you're not sure type N for no."
If you updated your NAND ROM or haven't run this option before you have to say y for yes here, you have to run this option at
least once or you can't boot back to NAND. Just
make sure you've got your NAND ROM booted and not a loop rom because this will take the boot partition content of your
currently running ROM.
5. Remove a loop installation
If you've come this far you know what you're doing in this option. I'm not going to go through all combinations but they are
self-explanatory.
6. Boot an installed ROM.
Exactly what it says, just remember that even non-installed ROMs may be listed here, if you happen to try to boot to one of
those it will hang at boot, in that case, pull the
battery, reboot to recovery (press and hold vol down while you press power) and use the boot zips that have been created for
your roms.
the Boot zips are located in /sdcard/multiboot/nandboot.zip for the NAND and /sdcard/multiboot/loop-roms
/[namofyoursystemloopfile]/[nameofyourROM]boot.zips
I think that's all, if there is any questions, feel free to ask.
Android version: MakeLoopROM-Android-V11.tar
MD5: 1b33ad6c3078711444c01867e436b65a
===============================================DEPRECATED==============================================================
It took a while but i managed to sort out how to boot to loop filesystems stored on the SD-card.
This means that you don't have to partition anything and you can have as many ROMs installed as you can fit on your SD-card.
You don't have to worry about a2sd/S2E/mounts2sd or anything like that (just make your data partition large enough to hold your apps, you can share the data partition between as many loop ROMs as you like) but this doesn't prevent it either, your sd-ext partition will be untouched and mountable by any ROM you install into a loop file (if the ROM supports sd-ext, that is). Swap will work just fine too.
The script is self explanatory but there are a few things it doesn't explain so i'll explain it here.
Here we go:
1a. Download the MakeLoopROM(version).zip and unpack it to any directory of your choice, just remember where you put it, if you're going to do this under cygwin i suggest you put it in a directory that is easily accessible from the cygwin terminal (IE cygwin/home/"yourusername") and if you're using Linux, just unzip it to your home directory.
1b. Download the MakeLoopROM-Android.tar and unpack it to the root of your sdcard or copy the file to the root directory of your sdcard, open up a terminal session and run tar -xvf MakeLoopROM-Android.tar.
2. Copy the rom and gapps and whatever other package you want to convert to the MakeLoopROM directory that was created during the unzipping above.
3a. In Linux, open up a terminal, cd to the MakeLoopROM directory and type sudo ./makelooprom (losetup requires root permissions).
3b. In windows, open up the cygwin terminal, cd to the MakeLoopROM directory and type ./makelooprom-cygwin
3c. On Android, open up a terminal session, type su and hit enter, type cd /sdcard/MakeLoopROM and hit enter and then sh mkrom and hit enter.
4. Follow the instructions, it should be easy enough to understand.
5. If you want to convert a gapps package and/or other packages you repeat step 3 but type ./makeloopgapps instead of ./makelooprom it'll work for any package you want to install into your loop files, root is not needed for this step.
5a. For android you type sh mkgapps to make gapps and other packages.
6. To be able to reboot back to NAND (the ROM on your phones internal storage) you need to copy the boot.img of your current ROM into the multiboot directory.
6a. The android version now copies the running boot.img if you answer yes when you get the question if you want it to so there is no need to copy it in another way.
After you're done converting your ROM and the packages you'll find all important stuff in the multiboot folder within the MakeLoopROM directory, just copy the whole folder to the root of your SD-card (if you are running on android this step is unneccessary, the script will copy the files for you). You'll find your image files under multiboot (if you created them) along with the "nameofyourrom"boot.img and boot"namofyourrom".sh that you'll need to boot into the ROM from another ROM and finally under loop-roms/[nameofyoursysimage] you'll find all your converted ROMs and packages, ready for installation.
Now you're ready to install the loop ROM and the loop packages, it installs like any other ROM/package via your recovery of choice (I recommend my CWM Touch 6.0.1.1, it's what this is tested on but it should work fine on any recovery).
To switch between ROMs you open up a terminal window, type su to get root permissions, cd to the multiboot folder (cd /sdcard/multiboot) and type sh bootnand.sh to switch to your internal ROM or boot"nameofrom".sh (bootcm-7.2.0-blade.sh if you installed cm-7.2.0-blade for example) for any of the loop roms. You can also install script manager and script manager widgets and make widgets for those scripts on your homescreen, that way rebooting to another rom is as easy as pressing the icon on your homescreen.
I'm sure there'll be a lot of questions about things i haven't thought of, but if you should fail or do something wrong then just hit ctrl-c and start over, the script cleans up and restarts the build.
Thanks to:
[email protected] for some ideas.
championswimmer for some scripts from his Kernel Kitchen.
Tilal for suggestions that helped fix running this script on the phone itself as well as the app he's making to make reboots between the different installs much easier and better.
[email protected] for being a very patient tester.
Files:
Linux version: MakeLoopROM-Linux.tar
MD5: 8907e2519276f4abcbb5bab0de168ae5
Windows Cygwin version: MakeLoopROM-Windows.zip
MD5: 096921e7a08eba98329bb7ec486068f0
Android version: MakeLoopROM-Android-V8.tar
MD5: f4ee326faf65bd032a95a1e2b4e8bc9f
25/10:
* Completely rewritten, it's now entirely menu driven with choices so you don't have to type filenames.
* Fixed faulty boot flashing
* Now copies a flashable zip of each loop ROM and NAND ROM boot images to /sdcard/multiboot for NAND and /sdcard/multiboot/loop-roms/[nameofyoursystemloopfile/[nameofyourrom]boot.zip so you can flash it via CWM if you need to.
* Includes a cross compiled version of bash for arm to fix a lot of scripting problems.
12/10:
* Streamlined, a LOT faster now.
* Possible fix for the random faulty boot.img flashing when switching between ROMs, need feedback on this.
* Removed unnecessary file creation (all of it runs within one loop file and questions (if you create the system and data images you won't get the question twice, it checks if your ROM is a JB rom without your interference).
* Added cleanup script, to use it run sh cleanup as su and follow the instructions.
* Lots of other bits and pieces that makes it safer and faster to use.
3/9:
* Fixed the Android version to work with CM7 roms [changed let=size to size=$(expr], thanks to Sulthekk for the heads up on that
* Added a failsafe to the Android version on creation of system loop file if it already exists and on giving the script a name for system and data image that doesn't exist. You get one retry, if you can't get it right after that... It is possible to multitask on android, just open a file manager if you forgot the name of the system or data image.
* Fixed the Linux and Windows versions to work with JellyBean ROMs, thanks to jpeg729 for the heads up on that
* Change the file names to reflect which version is which
1/9:
* Finally fixed the problems with no permissions running the script on some ROMs.
1/9:
* Added the choice to copy your currently running roms boot.img to your multiboot automatically, no user interaction needed for the process.
31/8:
* Changed the android version to a tar to keep file permissions intact.
* Fixed it up so it runs on CM-10 and PA as well as all other roms (i hope).
30/8:
* Release of the Android version, now runs completely on your phone.
28/8:
* Changed the Linux version to tar format to ensure that permissions are correctly set.
* Fixed the Cygwin version so it can make the data and system image files, they will be formatted on install and if it's a new installation you have to choose y to format the data image file or it will not have a filesystem.
* Changed a few misspellings in user interaction texts and tried to make it easier to understand.
Woah. Cwm and Multiboot in a week's time?
When you getting your RD status?
Good work man
Sent from my Ouya
QuantumFoam said:
Woah. Cwm and Multiboot in a week's time?
When you getting your RD status?
Good work man
Sent from my Ouya
Click to expand...
Click to collapse
I've got one third project that i'm about to wrap up and after that i'll just do incremental updates on those three while devoting my time to kernel development which is sorely needed.
Found a util for windows called winDD, i'll check it out and include it in the next version if it's of any use. That will fix the problem with not being able to create the loop files on windows.
I've built makebootfs and makebootimg for android and will include them along with a script that works on android in the next release.
I'll make the next release a tar version along with a zip version for windows users, this is to preserve file permissions.
Any other suggestions are most welcome.
After a lot of issues i finally got the Android version ready, i've tested it and it works fine on my phone, both the makelooprom-android and the makeloopgapps.
I had to cross compile perl and the mkbootfs and mkbootimg files to run on armv6l which took a while because i kept getting errors, both are included with the script.
Then there was a problem with running split-bootimg.pl on the sdcard, fat32 doesn't support symbolic links so i had to make three different loopfiles within the script to use for bootimg-contents ramdisk-contents and output.
Anyway, now it runs just fine, try it out.
New version up and running.
Only for zte blade ?
Sent from my B15Q using XDA Free mobile app
Developed out of this project:
https://forum.xda-developers.com/ve...-cid-11-6-0-security-patches-5-0-5-1-t3522355
--------------------------------------------
If you are running OptimalROM 15-5 (latest version) or any previous variants or ROMs based on pre PB1 images you are vulnerable to stagefright!
You may be wondering why you are vulnerable because Verizon rolled out stagefright patches when OG5 was released, which is what OptimalROM is based on. Unfortunately stagefright had further developments found later on, so another patch was later applied in PB1 (possibly OK3, I have not done checks on OK3), so any OG5 ROM is vulnerable to these new findings!
You can verify this is true on your device by using Zimperium's SF detector.
https://play.google.com/store/apps/d...frightdetector
--------------------------------------------
I am not an experienced android developer. I am only a poweruser, so I am not familiar enough to provide you with flashable zips. Perhaps a developer can assist with this!
Instead you can follow this guide to achieve a stagefright vulnerability free device.
Pre-Updating
This is where you get the patched files.
Since I am not a known developer on XDA, I will provide the steps I did that you can skip by downloading the .zip I provide. All of the files in the zip come directly from a stock PB1 install.
Skip this section if you just want to apply my zip without jumping ROMs to acquire the files yourself.
0. If you choose to do this, use SafeStrap and make a backup of all your partitions, that way when you finish you can easily restore to your OptimalROM with your configuration and data
1. Wipe everything (except extSD) and flash the PB1 ROM with Odin https://www.androidfilehost.com/?fid=24438995911970571
2. Root following the traditional OK3/PB1 root guide https://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370
2.5 (Optionally use SuperSUme to remove kingroot and install SuperSU) - I did this on my run
3. Update BusyBox through GooglePlay store. Install BusyBox. (needed to properly install SafeStrap)
4. Reinstall SafeStrap (do it now so you can easily recover)
5. Download some sort of filemanager that has root access and can mount system as read/write. I used Root Explorer (full version)
6. Grant root to filemanager and navigate to /system/lib
7. Select libutils.so, and every stagefright file. You will have selected a total of 34 files if done correctly.
-- Note: In Root Explorer I used search for "libutils" to find libutils, and searched "stagef" to find the other 33 files.
8. Copy these 34 files to a new folder on your extSD
9. Load SafeStrap, wipe everything (except extSD!) and restore your backup you took before you started this.
You just got all the patched files and need to only apply them to your current OptimalROM installation!
Here is the zip if you choose to skip the above steps!
https://www.androidfilehost.com/?fid=385035244224409960
Mirror:
http://www.filedropper.com/optimalrom-stagefright-securitypatch-pb1-based
Name: optimalROM-stagefright-securitypatch-PB1-based.zip
Size: 2807757 bytes (2 MB)
SHA1: CE3D6109C6EDD03352AF4E4DA03C64B5620938B2
Patching Vulns
This is where you apply the patched files.
1. Use your read/write root access capable filemanager and select ONLY libutils.so
2. Use Copy and paste the file to /system/lib
-- Confirm the overwrite request (and for some filemanager, confirm mount as read&write)
IT will FREEZE. Leave it alone!!!!
The screen will become unresponsive, but eventually it will reboot by itself.
Once this happens, you may appear to hang on the Samsung bootlogo. DO NOT touch!
The startup takes up to 6 minutes.
Once your system finishes starting, you may get a message saying "SYSTEM is not responding, KILL or WAIT or REPORT" Choose WAIT, it should work as usual.
3. Open Stagefright Detector. Verify that one of your vulnerabilities is gone (and replaced with a new name for the same CV).
4. Open your filemanager again. This time copy the other 33 files from your extSD and confirm all replacements in /system/lib
--Your system will not freeze this time. Once it completes, continue.
5. Reboot
6. Open Stagefright Detector
-- Hooray, no vulnerabilities!
Enjoy OptimalROM 15-5 with protection against stagefright!
Hopefully in the future flashable zips will make this easier once I learn how that works.
Just an FYI, I tested this against the new 6.0 firmware (QB2).
No change to stagefright, so if you choose to stay on 5.0 / OptimalROM, this patch is still adequate.
If any developer is familiar with making a flashable zip, please post/PM me.
Hello,
I have a phone that I would like to root, unfortunately the bootloader is locked. There are some pre-rooted stock roms around that you could flash using fastboot without unlocking the bootloader. Unfortunately the latest version of the firmware is not available in pre-rooted form.
I downloaded the lastest official firmware (an update.zip package) from the website of the manufacturer and installed it on my phone using the stock recovery. Now the only thing that I need to do is modify the system image and flash it back in the phone.
I converted the system.new.dat file that was included inside the zip package into a raw image that I can easily mount and modify from my computer (I use Debian Jessie). How could I modify the system image to include the su binary and a Superuser up (SuperSu, or equivalent) and convert it into a format that I can flash using fastboot?
I'm running Android 6.0.1 with SELinux set to enforce. The device is an Asus Zenfone 2 Laser ZE550KL. I've posted here because the process of modding a stock rom should be almost doable regardless of the phone manufacturer
DISCLAIMER: I'm not responsible for anything that happens to your device. Use the steps below at your own risk . Be mindful of the facts unlocking bootloader voids your warranty and also hard resets your device - ALL YOUR DATA, SETTINGS, FILES AND APPS WILL BE DELETED. Rooting your device voids warranty as well. I own the Chinese SHT-AL09 8.4" LTE device and tested this root procedure ONLY WITH THIS MODEL. However, I believe there is a good chance the steps below will work for all other models of MediaPad M5, including WiFi only variants and 10" models. You MUST unlock your bootloader first. Do NOT use ramdisk image I provide in the steps below for any other model besides SHT-AL09 - doing so is guaranteed to render your device unusable. Ramdisk I provided is ONLY for SHT-AL09. You will need to extract your own ramdisk from stock firmware, specific to your device model
Credits:
@Wirmpolter - this root method largely based on his Magisk guide for Mate 9
@topjohnwu for creating the awesome Magisk Manager, which was used to patch ramdisk image with superuser binary
People, who created HuaweiUpdateExtractor
@magnumlove who pointed me in the right for developing root method in this post
This site, for hosting stock firmware for Huawei MediaPad M5
1. First, you will need to unlock the bootloader of your M5. Follow this guide
2. Transfer this patched ramdisk image to your device
Note for users with version of M5 other than SHT-AL09: Do NOT use the above ramdisk image. Download the full stock rom (update.zip) from the site I linked in the credits. Extract UPDATE.APP file from the zip. Then use HuaweiUpdateExtractor to extract ramdisk.img specific to your device. If you get errors in HuaweiUpdateExtractor - uncheck first 2 checkboxes for checksum verification on Settings tab and try again
3. Once bootloader is unlocked, install latest Magisk Manager from the official Magisk thread
4. Once Magisk Manager gives you a pop-up prompt to either download Magisk zip or patch the boot image file - chose to patch the boot image, but instead of boot.img select ramdisk.img from step 2. Magisk Manager should give you a message the image was successfully patched. It will be saved as patched_boot.img in MagiskManager folder on your sdcard. If it does not say success - do NOT proceed
5. Transfer the newly created patched_boot.img back to your PC
6. If you already have ADB and Fastboot tools installed on your PC you can just use what you've got. If not - get them from here
7. Connect your M5 to PC via USB cable
8. Run command prompt. If your ADB and Fastboot are installed as system app - you can do this from any path in CMD. If not - you need to switch in CMD to your ADB and Fastboot folder. Either way, the patched ramdisk patched_boot.img file must be in the same path, from which you will be running commands below in CMD window
9. Type "adb " in CMD window to start android debug bridge
10. Type "adb reboot-bootloader" and wait until your device restarts in Download mode
11. Once in Download mode, type "fastboot flash ramdisk patched_boot.img" - you should see some output from flash procedure, indicating successful flash
12. Once patched ramdisk is flashed, type "fastboot reboot"
That is it - you're done. Once your device reboots it will be rooted.
Note 1: Magisk Manager has it's own built-in superuser app and uses Systemless root, which works completely differently - you will not see external, standalone app like SuperSU or SU you might be familiar with in your App Drawer. The way to control the superuser app is from Magisk Manager itself: Settings->Superuser section
Note 2: I don't do tech support via PM, so don't PM me for help or with questions. Use the thread instead, and some other XDA members or myself will probably help you. Good luck!
Note 3: You may find some links to Huawei stock firmware in the 2nd post
UPDATE - August 6, 2018
Huawei officially approved 8.0.0.171 firmware with GPU Turbo for installation on SHT-AL09 devices. If you're doing first time root - just follow the original steps above. If you are already rooted and want to upgrade to 8.0.0.171 - follow the steps below:
1. Boot into download mode:
Code:
adb reboot-bootloader
from CMD window
2. Flash stock recovery from 8.0.0.171 to your device in fastboot:
Code:
fastboot flash recovery_ramdisk recovery_ramdis.img
3. Download and install the official OTA through Settings (full or just the update)
4. Boot into download mode again and flash patched ramdisk from 8.0.0.171
Code:
fastboot flash ramdisk patched_boot.img
5. OPTIONAL: If you were using TWRP or any custom recovery - you will need to reflash it back
Code:
fastboot flash recovery_ramdisk twrp.img
or whatever you named your custom recovery image
REMINDER: Do NOT use ramdisk image I provided for any other model besides SHT-AL09 - doing so is guaranteed to render your device unusable. This patched ramdisk is ONLY for SHT-AL09. You will need to extract your own ramdisk from stock firmware, specific to your device model
Needless to say, all the images you are going to flash must reside in the same directory, from which you are going to be running the CMD commands. If your ADB/Fastboot folder is not in your WIndows' PATH environmental variable - the images must be placed in the same folder where ADB/Fastboot binaries are, and CMD commands must be run from that folder.
C5Longhorn said:
Yes, they still work. I have the same model and build as you and I'm rooted.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I'm considering buying an SHT-W09 with firmware version 8.0.0.200 (C567), but I'd like to know if I can root it first. I do not know if the bootloader has been unlocked. Since you have the same version, can you confirm that it's possible to unlock and root, and if so, sketch out how it's done? I'm confused about whether it's possible with this firmware.
samiller said:
I'm considering buying an SHT-W09 with firmware version 8.0.0.200 (C567), but I'd like to know if I can root it first. I do not know if the bootloader has been unlocked. Since you have the same version, can you confirm that it's possible to unlock and root, and if so, sketch out how it's done? I'm confused about whether it's possible with this firmware.
Click to expand...
Click to collapse
Unlocking is possible *only* if you've gotten already your unlock code. As this service was suspended about 2 years ago there is no easy way to get it unlocked.
Small request to developers, or people with access to reliable file hosting: I don't have a developer account, so all the files I linked or referenced in the OP are hosted on free hosting sites. That file hosting has expiration date and max downloads limit, so the files will become inaccessible sooner rather than later. Please upload these files to reliable hosting and create a post with the links. I will link your post in the OP as a mirror.
In the meantime, mirror for SHT-W09 firmware: https://mega.nz/#!asVjmZrR!bW2OmXgTjnyVN4pqb9fA7OzAJ4bzil7YZxNW14qoCmk
I can confirm that this works on the 10.8" wifi model using the devices relevant ramdisk.img.
Hello, can somebody test sixaxis controller tool with root and magisk? There is a Trial in Google Play Store, that is called sixaxis compatibility checker without purchise the App. Maybe i want to buy the Tablet, but only with Dualshock 4 Support...
Just a heads up, been following threads on this forum for flashing a GSI. Now that you guys can root, you can also make backups of your own stock system image if you can't find one from Firmware Finder. Then you can safely try flashing the GSI.
@MishaalRahman well it's bit like chicken egg dilemma. As we do not have a stock system image for e.g. SHT-W09 we cannot patch the ramdisk.img and so we cannot get the stock system image ...
Thanks Apo11on, great to have root so soon for the M5! Do you know if there's a way to get Xposed working? I tried the Xposed Framework SDK 26 from inside Magisk, but it put me in a boot loop.
Question is, for those of us with the Non Pro version, can this still be done.
@OHP Yes. The OP did it with the 8.4" version which has no pro option.
I'm looking to buy the Chinese 10" wifi version myself but need Google Play Store + Services on it which I'm guessing the Chinese version doesn't have. Is one of the firmwares at the website you link to a global version of the firmware that will work on this model?
OHP said:
Question is, for those of us with the Non Pro version, can this still be done.
Click to expand...
Click to collapse
Doesn't matter what version you have as long as you have access to your device firmware and the ramdisk.img. You really need to reread the guide.
magnumlove said:
Doesn't matter what version you have as long as you have access to your device firmware and the ramdisk.img. You really need to reread the guide.
Click to expand...
Click to collapse
Problem I have is :
CMR-W09C432B123 (8.0.0.123) from download headlines.
notice the Bold letter.
my Firmware on device:
CMR-W09C432123 (8.0.0.123)
obliviously it could be nothing but I wouldn't want to brick my tablet :fingers-crossed:
OHP said:
Problem I have is :
CMR-W09C432B123 (8.0.0.123) from download headlines.
notice the Bold letter.
my Firmware on device:
CMR-W09C432123 (8.0.0.123)
obliviously it could be nothing but I wouldn't want to brick my tablet :fingers-crossed:
Click to expand...
Click to collapse
I have exactly the same tablet/firmware as you and it was fine. The additional letter also threw me a little. But if you are unsure, download Huawei Firmware Finder from Google play and it will automatically detect your tablets firmware (which you can download if you wish).
magnumlove said:
I have exactly the same tablet/firmware as you and it was fine. The additional letter also threw me a little. But if you are unsure, download Huawei Firmware Finder from Google play and it will automatically detect your tablets firmware (which you can download if you wish).
Click to expand...
Click to collapse
I took the plunge, and I am sucessfully rooted now :silly:
struggling with this part
2. Transfer this patched ramdisk image to your device
Note for users with version of M5 other than SHT-AL09: Do NOT use the above ramdisk image. Download the full stock rom (update.zip) from the site I linked in the credits. Extract UPDATE.APP file from the zip. Then use HuaweiUpdateExtractor to extract ramdisk.img specific to your device. If you get errors in HuaweiUpdateExtractor - uncheck first 2 checkboxes for checksum verification on Settings tab and try again
I have a CMR-W09 :s i can got the files downloaded and the huwai software not sure how i make a img
The good news is I followed these instructions yesterday and they worked perfectly (SHT-AL09).
The bad news is, I seem to have lost root overnight.
---------- Post added at 06:41 AM ---------- Previous post was at 06:22 AM ----------
And I figured out why I lost root; I was playing around with Developer options and switched the default GPU renderer from 'default' to 'Skia.' Apparently, this disables root access until you switch back. I regained root access on a reboot, lost it again after switching back to Skia, and then regained it after switching back to default.
I got the right image file from the site and huwai extract. I have googled how to use this app but what files do I extract as there appears to be. Alot ? I extracted all of them ? I don't have a ramdisk.img
Also thanks for writting this up. Without it I would be lost
Thanks for the efforts making this thread. Unfortunately my device is SHT-W09 and I'm still waiting for the right firmware. Is there anything I can help, considering I have the device?
@dkk6 I am in the same boat as you. Unfortunately I installed the update to 8.0.0 123 without having the Firmware Finder installed on the device. Do you have installed already the update to 8.0.0 123?
If not, you could install Firmware Finder and provide us with the ota url ...
This works perfectly no issues. i had some how maanged to download the wrong rom first. AND thankfully it did not have a ramdisk in. it is important that your firmware matches the firmware present on the site as explained. This was easy guide to follow now to flash it with somthing other then andriod
AndDiSa said:
@dkk6 I am in the same boat as you. Unfortunately I installed the update to 8.0.0 123 without having the Firmware Finder installed on the device. Do you have installed already the update to 8.0.0 123?
If not, you could install Firmware Finder and provide us with the ota url ...
Click to expand...
Click to collapse
I'm on 8.0.0.101
ULEFONE NOTE 9P, Stock rom is not real bloated, but just a little.
From Build
GQ3092SH1-HC-M629-ULEFONE-20200703_V05
Patch for the newer build (20200904-V07) is ready for sharing also.
****NOTE TESTING HAS NOT BEEN DONE ON MIXING NEW SYSTEM.IMG ON OLD VENDOR*****
****RECOMMEND DOING FULL UPDATE OR DOWNGRADE BEFORE FLASHING MODIFIED SYSTEMS****
Stock roms are published on ULEFONE gdrive.
https://drive.google.com/drive/folders/1Bq16pmRMaFEVT_xZilWhhdzTzk9fojV8
I removed the adupus/FOTA apps, child mode, simple_mode, mfg customization to chrome, verizon provider remote sim lock app.
Added adaway hosts file for ad-blocking in browser.
Flashed back to phone in same way as flashing GSI rom.
adb reboot fastboot (fastbootd, not bootloader)
fastboot flash system modified-system.img ( fastboot.exe on pc needs to be from July 202 or newer)
when flashing is done, from menu on phone screen select boot to recovery.
perform factory reset and reboot.
https://www.androidfilehost.com/?w=files&flid=318156
In case you are wondering , how I made changes. I will tell you.
I used SuperR-Kitchen script/ tool
credits to @SuperR.
Start a new project. Add the stock firmware. Needs to be as a zip. So extract the embed-ed *.rar file downloaded from Ulefone. Re-zip just the contents of the final folder. In other words, the zip needs to be the files, not the files inside a folder, inside other folder.
The kitchen will ask if you want to extract the vendor and product images and use them in you rom. I did not make changes to those partitions, so did not extract or include them.
When unpacking is completed. You can browse the extracted system folder.
The attached files have an .txt extension in order to upload them here. But in the kitchen tool you need to remove the extension.
Code:
Add "host" file to /system/system/etc in your extracted rom folder and replace host file that is already there.
Add "bloat_custom" to the kitchen folder "super_r/tools/root/
run #6 debloat menu then #2custom debloat option from kitchen #8 rom tools menu
run deodex option from #8 rom tools
When edits are done. Use #8 rom tools , #7 build menu, #2 build etx4 img
select system, then sparse, system.img
Keep permission type as raw_image
That's all. Use caution when adding additional programs you want removed.
Hi. On Ulefone Gdrive, there are both android 10 and 11 rom files. but it says upgrading from 10 to 11 is 'forbidden'. Is there any way to bypass this restriction?
Edit for those who are wondering: Ulefone has removed the restriction and it can be upgraded to android 11 without any issue. You do lose your data during the process, though.