I have a consumer edition Maxx (not Dev) with bootloder unlocked via Chinese guy. I was messing with 4.4.4 and decided to go back to 4.4.0 (12.6.3), fired up RSD Lite but ... could not because:
downgraded security version
update gpt_main versin failed
preflash validation failed for GPT
Can someone confirm that 4.4.4 (21.11.21) is not downgradable to even 19.6.3.
Apparently not.
http://forum.xda-developers.com/showpost.php?p=54150949&postcount=561
any luck for downgrade ultra?
anyone who got success on downgrade droid ultra ?
i dont think this would be possible atm.
CrazyRussianXDA said:
I have a consumer edition Maxx (not Dev) with bootloder unlocked via Chinese guy. I was messing with 4.4.4 and decided to go back to 4.4.0 (12.6.3), fired up RSD Lite but ... could not because:
downgraded security version
update gpt_main versin failed
preflash validation failed for GPT
Can someone confirm that 4.4.4 (21.11.21) is not downgradable to even 19.6.3.
Click to expand...
Click to collapse
javed91214 said:
anyone who got success on downgrade droid ultra ?
Click to expand...
Click to collapse
It's not possible as of now. The bootloader wont run the software for some reason. Just boot loops. Havent put much work into it though.
You have to remove few lines of code from the xml file.
I have seen a guy who removed 4 lines of code from the xml file and got success to downgrade with unlocked boot loader
That does not apply to 4.4.4. Been there done that
iAjayIND said:
You have to remove few lines of code from the xml file.
I have seen a guy who removed 4 lines of code from the xml file and got success to downgrade with unlocked boot loader
Click to expand...
Click to collapse
how did he unlock it?
Hi!
I have some problem for reflash my XT925.
He's unlocked on the bootloader and was rooted. I installed the last official KK ROM (from xda thread about update on KK). But my clock was stuck on the 1st January of 1970 and no way to modify that.
So I wiped the phone with TWRP and after I try to reflash my moto.
And it doesn't work! If i use the file for updating from 4.1.2 to KK, I have ann error with :
Code:
tz file size
And if I use the Retail FR 4.1.2 9.8.2Q-8-XT925_VQU-22
Code:
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
If I delete these two files the flash works but the phone doesn't boot :'(
So I think my partition was corrupted and this is why I can't boot.
So how I can repair that. Some people tried to flash the GPT file from partition_signed file but I don't know where is mine ^^
Regards
No need to repartition system.
Flash the Retail FR 4.1.2 9.8.2Q-8-XT925_VQU-22 with RSDlite, then look for the OTA update.
If OTA update not available for your ROM, download the Edit.Blur_Version.98.21.22003.XT925.CEE-Retail.en.EU.zip which has the updater script included and flash it through your recovery.
Protman_40 said:
No need to repartition system.
Flash the Retail FR 4.1.2 9.8.2Q-8-XT925_VQU-22 with RSDlite, then look for the OTA update.
If OTA update not available for your ROM, download the Edit.Blur_Version.98.21.22003.XT925.CEE-Retail.en.EU.zip which has the updater script included and flash it through your recovery.
Click to expand...
Click to collapse
But it did'nt work when I try to reflash the partition (only the partition) it does'nt pass This is why I have this error
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
Click to expand...
Click to collapse
I need to reflash the partition but I was in KK. SO it doesn't want to flash a previous version I think. I need a KK official ROM to re-partition.
how did you install kk over what you had?
At first :
1/ Flash 4.1.2 Upgradable from here http://forum.xda-developers.com/dro...tutorial-make-motorola-razr-hd-xt925-t2916465
2/Upgrade via OTA to KK
3/Bug appeared with the clock and the date (unable to change the date or the clock (i'm not alone https://forums.motorola.com/posts/2b9452ac6b?page=1) )
4/Decided to wipe all for a clean flash
5/Trying to flash with the Retail FR 4.1.2 9.8.2Q-8-XT925_VQU-22
5/Flash Failed if I keep partition_signed (security downgrade)or tz file(wrong file size)
6/Flash Pass if I delete this lines in the xml but the phone won't start (bootloop)
Is it clear ?
much better Btrax, i can see clearly now
i just had that clock isht stuck in 1970 yesterday man, i did troubleshoot it for an hour or so, but I couldn't get it to adjust itself. In addition, i was doing more stuff even opening the xt 925 physically .
So after all the things i tried, i disconnected the battery to make sure i dont short circuit anything, then tightened up cables .
Rebooted the thing, and it fired right up.
I don't know how comfortable you are with getting into the xt 925, however with guidance, you don't even need to disconnect the screen cables or nothing.
You have two screws in the bottom, then you can just pry it open , and sideloading some plastic tool to disconnect battery and back.
I wish i had a softer solution but , it is what it is man. I ll be glad to help if you go that route.
ps. put link to this post in the link you shared
Since you are in France, there is a new recent OTA KK official update : 180.46.117.XT925.CEE-Retail.en.EU.
If I were you I would go back to Step 1 and 2 and then try to grab this new update.
Seems like it corrects Free Carrier EAP SIM and other Google security issues. Hope it will correct your problem too?
Protman_40 said:
Since you are in France, there is a new recent OTA KK official update : 180.46.117.XT925.CEE-Retail.en.EU.
If I were you I would go back to Step 1 and 2 and then try to grab this new update.
Seems like it corrects Free Carrier EAP SIM and other Google security issues. Hope it will correct your problem too?
Click to expand...
Click to collapse
In this update there is just je gpt file and no Tz file. so I need both I think because I flashe the GPT.bin file and after flash the Retail France ROM, but it didn't Work :/
So where i can find the tz file and gpt from canada?
My bootloader is unlocked so i can flash any official ROM
Hi,
I got my Moto G 2015 XT1541 running with Android 5.1.1 official rom and TWRP Osprey 3.0.0 R2. I just got the official message to upgrade to Marshmallow, but when I to upgrade TWRP comes with the following error: Updater process ended with ERROR: 7
I've placed a full log here: recovery.log
I also tried installing an other OTA file - (2GB Retail EU OTA): Download - thanks to @Osid - from here, but got the same error.
Also, the official update is version 24.41.33.en.EU, and the above file 23.41.47 and is already on my phone, according to "About Phone".
Anyway: Can someone please help me to get past this error and update to the official 24.41.33.en.EU? I've read about changing an updater-script file in the zip if you have one, but this is a block.map.
Thanks allot!
robert1010 said:
Hi,
I got my Moto G 2015 XT1541 running with Android 5.1.1 official rom and TWRP Osprey 3.0.0 R2. I just got the official message to upgrade to Marshmallow, but when I to upgrade TWRP comes with the following error: Updater process ended with ERROR: 7
I've placed a full log here: recovery.log
I also tried installing an other OTA file - (2GB Retail EU OTA): Download - thanks to @Osid - from here, but got the same error.
Also, the official update is version 24.41.33.en.EU, and the above file 23.41.47 and is already on my phone, according to "About Phone".
Anyway: Can someone please help me to get past this error and update to the official 24.41.33.en.EU? I've read about changing an updater-script file in the zip if you have one, but this is a block.map.
Thanks allot!
Click to expand...
Click to collapse
Flash the stock recovery and it will work. Official OTAs and custom Recovery's will not work together.
nobreak1970 said:
Flash the stock recovery and it will work. Official OTAs and custom Recovery's will not work together.
Click to expand...
Click to collapse
Both update methods, as described above, fail. Method 1: using the phone's system updater, method 2: using the official(?) OTA upgrade files provided on this site.
But it looks like the OTA file is of a version I already have. See attachment.
Sorry, I misread your reply. I am looking for the stock recovery now keep you posted.
nobreak1970 said:
Flash the stock recovery and it will work. Official OTAs and custom Recovery's will not work together.
Click to expand...
Click to collapse
Ok, I took the recovery.img from "XT1541_OSPREY_RETEU_2GB_5.1.1_LPI23.72-33_cid7_subsidy-DEFAULT_CFC.xml", my version was 23.72-47. Hope that doesn't really matter. But is was the only 2GB European ROM I could find here.
So I used fastboot to flash that and tried the system update again. At the beginning it looked hopeful; It was showing the Installing System Update with the progress bar, but then briefly the error icon and rebooted without making any changes.
If I need to re-lock and/or un-root to fix this, can it be don without wiping everything?
Thanks again!
robert1010 said:
Ok, I took the recovery.img from "XT1541_OSPREY_RETEU_2GB_5.1.1_LPI23.72-33_cid7_subsidy-DEFAULT_CFC.xml", my version was 23.72-47. Hope that doesn't really matter. But is was the only 2GB European ROM I could find here.
So I used fastboot to flash that and tried the system update again. At the beginning it looked hopeful; It was showing the Installing System Update with the progress bar, but then briefly the error icon and rebooted without making any changes.
If I need to re-lock and/or un-root to fix this, can it be don without wiping everything?
Thanks again!
Click to expand...
Click to collapse
Anyone who can help me with this please?
As the Nougat is rolling out for XT1572 devices, here's the guide for Flashing Stock Firmware using Fastboot for receiving Nougat OTA.
(Inspired by @acejavelin guide)
Prerequisites:
1) USB Drivers (Not needed for Windows 10)
2) Fastboot installed and working.
3) Stock Factory Images for Moto X Style (XT1572): https://firmware.center/firmware/Motorola/Moto X Style/Stock/XT1572/
Procedure:
1) Open a terminal or command prompt (Shift + Right click) window into the directory that contains the firmware files you extracted above.
2) Reboot the phone in Fastboot Mode (Reboot to Bootloader) and connect the USB Cable.
3) To verify if everything is perfect type in:
Code:
fastboot devices
If it shows your device serial number then you can be sure that it's properly connected.
4) Read the 'Notes' below.
6) Before proceeding, flash this commands to clean up the previous system's mess. This will get rid of the '(bootloader) Preflash validation failed' error when flashing gpt.bin (partition table).
Code:
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
5) Here's the actual commands to Flash the Stock Image. Please Enter them One-by-one, Don't create any .bat files or copy and paste the entire section.
Code:
[STRIKE]fastboot getvar max-sparse-size[/STRIKE]
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot flash modem NON-HLOS.bin (Flash twice, if Prevalidation Error)
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
Make sure you read whatever is happening on the prompt, do not miss any errors. (Scroll up the prompt and re-check everything before booting)
Notes:
1) This won't Lock your bootloader but you will be able to get OTA's.
2) For receiving Nougat on RETASIA Dual Sim, download: XT1572_CLARK_RETASIA_DS_6.0_MPHS24.49-18-8_cid7_subsidy-DEFAULT_CFC.xml.zip
There will be a 44mb update already queued when you boot the device. It will update the device to December 2016 Security Patch.
Reboot and you will be able to get Nougat OTA (911mb), if eligible.
3) If you didn't get the OTA Update, Flash this Nougat OTA after updating to December 2016 security patch: https://forum.xda-developers.com/moto-x-style/general/ota-nph25-200-15-retasiads-t3636765 (Credits: @Sagar_1401)
4) Different firmwares may contain a different number of system.img_sparsechunk.X files, you must flash the number you have in your firmware image in order. From what I have seen, most 5.1.1 firmwares have nine, 6.0 has eight, and 6.0.1 has eleven sparsechunks.
5) You must use a factory firmware image that is the same version as what you have installed or newer to successfully relock the bootloader, you cannot just grab the old (shipped) version from Moto's site. If you attempt to use a firmware image that is older than what you have installed currently, you will receive a Preflash Validation Error indicating such when you attempt to flash the partition table (gpt.bin).
There is no need to do fastboot getvar max-sparse-size, that is just for RSD Lite to check your maximum system chunk size, when doing it manually it does nothing.
Not really sure why this guide is needed, there are already a few out there that are basically identical.
Nice guide @antariksh thanks for this.
i will be flashing from my current version 6.0.1_MPH24.107-58 (seemingly higher version) tomorrow.
will update once i attempt this.
Quick tip if you can't get SafetyNet passed with Magisk V13.1 or V13.2
For Stock Nougat as we don't have boot.img
1) Backup boot with TWRP
2) Restore boot with TWRP
3) Flash Magisk zip
4) Reboot and Install Magisk Manager v5+
This won't get your SafetyNet passed.
5) Open Magisk Manager and once again press 'Download and Install'
This will automatically download and install the latest Magisk and after a reboot your SafetyNet will be passed.
antariksh said:
5) You must use a factory firmware image that is the same version as what you have installed or newer to successfully relock the bootloader, you cannot just grab the old (shipped) version from Moto's site. If you attempt to use a firmware image that is older than what you have installed currently, you will receive a Preflash Validation Error indicating such when you attempt to flash the partition table (gpt.bin).
Click to expand...
Click to collapse
I got 6.0.1 ROM, how do i downgrade to 6.0? I try to flash to 6.0, it's shown message like above
hi guys,
My XT1572, previous rom version 6.0.1_MPH24.107-58-5 and I reflashed to 6.0 MPHS 24.49-18-8 successfully but I can not update December patch security 2016. I attempted to flash Nougat on RETASIA Dual Sim in Recovery but error FingerPrinter. Do I need any tricky ? Thank
trannamcloud said:
I got 6.0.1 ROM, how do i downgrade to 6.0? I try to flash to 6.0, it's shown message like above
Click to expand...
Click to collapse
titanworm said:
hi guys,
My XT1572, previous rom version 6.0.1_MPH24.107-58-5 and I reflashed to 6.0 MPHS 24.49-18-8 successfully but I can not update December patch security 2016. I attempted to flash Nougat on RETASIA Dual Sim in Recovery but error FingerPrinter. Do I need any tricky ? Thank
Click to expand...
Click to collapse
You can't go from 6.0.1 to 6.0 completely... Your bootloader and partition table cannot be downgraded and are actually different than on 6.0, they work (meaning 6.0 will boot} but it isn't a match. You cannot take an OTA to 18-16 or any other version because of the mismatch.
The only way to upgrade is go back to 6.0.1 then take the OTA to Nougat.
acejavelin said:
You can't go from 6.0.1 to 6.0 completely... Your bootloader and partition table cannot be downgraded and are actually different than on 6.0, they work (meaning 6.0 will boot} but it isn't a match. You cannot take an OTA to 18-16 or any other version because of the mismatch.
The only way to upgrade is go back to 6.0.1 then take the OTA to Nougat.
Click to expand...
Click to collapse
Thanks a lot!
I go back to 6.0.1 Retapac, with security pack 1-Mar-2016, an now waiting for official Nougat OTA update
So I was on 6.0.1 as well and used the 18-8 firmware to downgrade to 6.0. had the same preflash validation error, i flashed gpt the second time after the error occurred and completed the flash like normal. Everything just worked perfectly fine after that. Got the security update to December and nought!
Edit : I did all of this keeping my bootloader unlocked.
Sent from my HTC 10 using Tapatalk
---------- Post added at 08:05 AM ---------- Previous post was at 08:01 AM ----------
You need to go to 6.0 and not 6.0.1.. The firmware to download is XT1572_CLARK_RETASIA_DS_6.0_MPHS24.49-18-8_cid7_subsidy-DEFAULT_CFC.xml.zip
trannamcloud said:
Thanks a lot!
I go back to 6.0.1 Retapac, with security pack 1-Mar-2016, an now waiting for official Nougat OTA update
Click to expand...
Click to collapse
Sent from my HTC 10 using Tapatalk
pradeepvizz said:
So I was on 6.0.1 as well and used the 18-8 firmware to downgrade to 6.0. had the same preflash validation error, i flashed gpt the second time after the error occurred and completed the flash like normal. Everything just worked perfectly fine after that. Got the security update to December and nought!
Edit : I did all of this keeping my bootloader unlocked.
Sent from my HTC 10 using Tapatalk
---------- Post added at 08:05 AM ---------- Previous post was at 08:01 AM ----------
You need to go to 6.0 and not 6.0.1.. The firmware to download is XT1572_CLARK_RETASIA_DS_6.0_MPHS24.49-18-8_cid7_subsidy-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
So have you upgrade to Nougat yet?
I unlocked bootloader already, so could i bypass preflash validatation error as your guide? My phone said "downgrade failured " in bootloader screen logs
titanworm said:
hi guys,
My XT1572, previous rom version 6.0.1_MPH24.107-58-5 and I reflashed to 6.0 MPHS 24.49-18-8 successfully but I can not update December patch security 2016. I attempted to flash Nougat on RETASIA Dual Sim in Recovery but error FingerPrinter. Do I need any tricky ? Thank
Click to expand...
Click to collapse
Last week I flashed the MPH24.107-58-5 (6.0.1) thinking that this was the latest version. But then I TWRP restored back to my Custom ROM as there was no Nougat OTA.
On this Saturday I was able to flash the MPHS 24.49-18-8 without any issues.
Try flashing the gpt.bin twice and don't try to lock your bootloader.
trannamcloud said:
So have you upgrade to Nougat yet?
I unlocked bootloader already, so could i bypass preflash validatation error as your guide? My phone said "downgrade failured " in bootloader screen logs
Click to expand...
Click to collapse
i didn't see what the bootloader screen logs said, but when you get the error, you have to reflash the same thing again.
fastboot flash modem NON-HLOS.bin (Flash twice, if Prevalidation Error)
Click to expand...
Click to collapse
I have upgraded to Nougat successfully with no problems.
pradeepvizz said:
i didn't see what the bootloader screen logs said, but when you get the error, you have to reflash the same thing again.
I have upgraded to Nougat successfully with no problems.
Click to expand...
Click to collapse
Att image for your ref, i got preflash error when trying to flash gpt.bin. And i found problem as Mr @acejavenlin said below, saidly i have to go back 6.0.1 again
acejavelin said:
You can't go from 6.0.1 to 6.0 completely... Your bootloader and partition table cannot be downgraded and are actually different than on 6.0, they work (meaning 6.0 will boot} but it isn't a match. You cannot take an OTA to 18-16 or any other version because of the mismatch.
The only way to upgrade is go back to 6.0.1 then take the OTA to Nougat.
Click to expand...
Click to collapse
yep, I had to return to XT1572_CLARK_RETASIA_DS_6.0.1_MPHS24.107-58-5_cid7_subsidy-DEFAULT_CFC.xml although I reflashed XT1572_CLARK_RETASIA_DS_6.0_MPHS24.49-18-8_cid7_subsidy-DEFAULT_CFC.xml completely on my devices and I was not able to upgrade to December patch. Now, my Android security patch level is September 1,2016. Did we have December 2016 patch for this MPHS24.107-58-5 and Asia DS? @acejavelin
titanworm said:
yep, I had to return to XT1572_CLARK_RETASIA_DS_6.0.1_MPHS24.107-58-5_cid7_subsidy-DEFAULT_CFC.xml although I reflashed XT1572_CLARK_RETASIA_DS_6.0_MPHS24.49-18-8_cid7_subsidy-DEFAULT_CFC.xml completely on my devices and I was not able to upgrade to December patch. Now, my Android security patch level is September 1,2016. Did we have December 2016 patch for this MPHS24.107-58-5 and Asia DS? @acejavelin
Click to expand...
Click to collapse
trannamcloud said:
Att image for your ref, i got preflash error when trying to flash gpt.bin. And i found problem as Mr @acejavenlin said below, saidly i have to go back 6.0.1 again
Click to expand...
Click to collapse
Same me, the only way is back to 6.0.1 now
titanworm said:
yep, I had to return to XT1572_CLARK_RETASIA_DS_6.0.1_MPHS24.107-58-5_cid7_subsidy-DEFAULT_CFC.xml although I reflashed XT1572_CLARK_RETASIA_DS_6.0_MPHS24.49-18-8_cid7_subsidy-DEFAULT_CFC.xml completely on my devices and I was not able to upgrade to December patch. Now, my Android security patch level is September 1,2016. Did we have December 2016 patch for this MPHS24.107-58-5 and Asia DS? @acejavelin
Click to expand...
Click to collapse
trannamcloud said:
Att image for your ref, i got preflash error when trying to flash gpt.bin. And i found problem as Mr @acejavenlin said below, saidly i have to go back 6.0.1 again
Click to expand...
Click to collapse
i am not expert in Moto flashing, don't honestly have the patience to wait for the OTA from 6.0.1 to 7.
Was the build MPHS24.107-58 official for ASIA DS in the first place? i see posts on the lenovo forums asking 6.0.1 for Asian version which makes me think there was no official release. i wouldn't expect a OTA update if there was no official release of the 107-58 build in Asia. mine is a Asain version, what version is yours?
hi, guys
What is your Bootloader version, mine is BL: A0.4C for 6.0 Retasia DS. I see 6.0.1 Retasia DS has BL: A0.4A. Which versions is higher? With BL: A0.4C for 6.0 Retasia DS, I cannot flash to 6.0.1 with GPT.bin and Boot.img.
I'm currently on xt 1572 retasia ds MPHS24.49-18-16 but with bootloader unlocked and twrp installed. Can someone guide me to the December 2016 file so that I can restore to stock or the nougat file so that I can directly update my phone through fastboot method. Thanks in advance.
duttandy said:
I'm currently on xt 1572 retasia ds MPHS24.49-18-16 but with bootloader unlocked and twrp installed. Can someone guide me to the December 2016 file so that I can restore to stock or the nougat file so that I can directly update my phone through fastboot method. Thanks in advance.
Click to expand...
Click to collapse
We don't have either... The best you can do is hope someone can do a TWRP backup of recovery you can restore, it needs to be the same variant and version.
pradeepvizz said:
i am not expert in Moto flashing, don't honestly have the patience to wait for the OTA from 6.0.1 to 7.
Was the build MPHS24.107-58 official for ASIA DS in the first place? i see posts on the lenovo forums asking 6.0.1 for Asian version which makes me think there was no official release. i wouldn't expect a OTA update if there was no official release of the 107-58 build in Asia. mine is a Asain version, what version is yours?
Click to expand...
Click to collapse
Confuse now. As you said, 6.0.1 build 107-58 is not official release, so maybe not receive OTA Nougat?
My version is Asian - retapac, 6.0.1 - build 107-58 with security patch 1-Mar-2016. It's unable to downgrade to any stock 6.0, as preflash error.
*Temporary solution can unbrick your moto g4 plus*
This is temporary solution Mixing new gpt and bootloader for unbricking xt1463
You will need dummy bootloader to installed on your device before proceeding !
No need to download full rom if you just want to unlock your bootloader you can us this method
https://drive.google.com/file/d/13AuJkn8eelq-wQ5wp7lNQTf7kT7_lLwI/view
Above link is for gpt and bootloader of 2018 April
How can you unbrick your hard bricked g4 plus
Tested on 16gb variance x1643
Requirements :-
ADB FASTBOOT
Download that gpt and bootloader
Procedure:-
Extract adb and gpt and bootloader in same folder then hold shift and right click anywhere to open command prompt in that directory
enter following commands
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
Then flash your rom any version i used
ATHENE_NPJS25.93-14-13_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
this version with
NPJS25_93_14_18_April2018_GPT_bootloader
this gpt and bootloader and my device booted am gonna download
NPJS25_93_14_18
Rom later tomorrow
Link where i got gpt and bootloader !
https://forum.xda-developers.com/moto-g4-plus/help/bootloader-yellow-alert-t3823085/page2
Need help ?
More info ?
Comment Below !
You might like to directly flash the NPJS25.93-14-18 April 2018 stock firmware after flashing the April 2018 GPT and bootloader, and not advise to flash older firmware. The reason is the April 2018 GPT/bootloader is from the NPJS25.93-14-18 firmware, so you're not mixing and matching GPT, bootloaders and firmware - if you are mix and matching firmware, that may lead to more bricking if you're not careful. Link to the NPJS25.93-14-18 firmware https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Of course, if you flashed the Oreo soak test at any point using the OTA updates, this procedure may not work. If you used the TWRP flashable, you may be okay if you did not use the Oreo OTA update - TWRP flashables don't update the bootloader. The Oreo OTA would update your bootloader to Oreo, which we don't have the GPT/bootloader files for yet.
echo92 said:
You might like to directly flash the NPJS25.93-14-18 April 2018 stock firmware after flashing the April 2018 GPT and bootloader, and not advise to flash older firmware. The reason is the April 2018 GPT/bootloader is from the NPJS25.93-14-18 firmware, so you're not mixing and matching GPT, bootloaders and firmware - if you are mix and matching firmware, that may lead to more bricking if you're not careful. Link to the NPJS25.93-14-18 firmware https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Of course, if you flashed the Oreo soak test at any point using the OTA updates, this procedure may not work. If you used the TWRP flashable, you may be okay if you did not use the Oreo OTA update - TWRP flashables don't update the bootloader. The Oreo OTA would update your bootloader to Oreo, which we don't have the GPT/bootloader files for yet.
Click to expand...
Click to collapse
Actually i didn't had link for new fireware i searched on firmware.centre i didn't got any latest version so i tried this mixing gpt and old firmwares and it worked for me
that's why i typed there temporary solution
Thanks for reply though ! <3