Hey guys, i using the TWRP to try to update my MUIU version using the EU Version but not working
See on the video:
https://media.giphy.com/media/iVS8oocFRQAqw5N5v1/giphy-downsized-large.gif
When I access the ZIP and click on install, the TWRP starts again without the recovery mode.
mlopess said:
Hey guys, i using the TWRP to try to update my MUIU version using the EU Version but not working
See on the video:
https://media.giphy.com/media/iVS8oocFRQAqw5N5v1/giphy-downsized-large.gif
When I access the ZIP and click on install, the TWRP starts again without the recovery mode.
Click to expand...
Click to collapse
Which TWRP and which rom has which rom?(full name).
MIUI - MIUI by xiaomi.eu
13.0.12
13.0.12.0(SLECNXM)
TWRP: rECOVERY pROJECT 3.6.12 Xiaomi 12SPRO V5.6_A12
mlopess said:
MIUI - MIUI by xiaomi.eu
13.0.12
13.0.12.0(SLECNXM)
TWRP: rECOVERY pROJECT 3.6.12 Xiaomi 12SPRO V5.6_A12
Click to expand...
Click to collapse
Remove lock screen security.
Update the Twrp .
the latest version is xiaomi.eu_multi_UNICORN_V13.0.18.0.SLECNXM_v13-12.zip.
Use OTA and download the rom.
OTA then TWRP and not TWRP directly.
I have no idea how to do this, do you have some tutorial about this?
mlopess said:
I have no idea how to do this, do you have some tutorial about this?
Click to expand...
Click to collapse
For the TWRP you know how to do it, just update it with the one that is installed.
For the update you click on the update icon and follow the instructions.
Ok, with the TWRP, i just download this image, find it on the TWRP Dashboard and make the recovery with the image.
But, what is "Use the OTA", is correct to download the ROM on the Phone, reboot with recovery mode, and install this new room on the TWRP simply? Or "OTA" is different?
mlopess said:
Ok, with the TWRP, i just download this image, find it on the TWRP Dashboard and make the recovery with the image.
But, what is "Use the OTA", is correct to download the ROM on the Phone, reboot with recovery mode, and install this new room on the TWRP simply? Or "OTA" is different?
Click to expand...
Click to collapse
Click on the Update icon or go here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the rom is downloaded to the phone then you update it from the update ,the phone reboot and the twrp installs the rom.
I received this error now
Fail to build the system_exit, system_root
mlopess said:
I received this error now
Fail to build the system_exit, system_root
Click to expand...
Click to collapse
With OTA and the TWRP twrp-3.7.0_12-v6.5_A12-unicorn-skkk .?
NOSS8 said:
With OTA and the TWRP twrp-3.7.0_12-v6.5_A12-unicorn-skkk .?
Click to expand...
Click to collapse
Yes, look this video, to check if i make the correct way
123512
Watch "123512" on Streamable.
streamable.com
Thanks for all support, btw but I don't know what to do now.
mlopess said:
Yes, look this video, to check if i make the correct way
123512
Watch "123512" on Streamable.
streamable.com
Thanks for all support, btw but I don't know what to do now.
Click to expand...
Click to collapse
I told you to remove lock screen security, but that's not the problem.
Either you want to keep your data and install xiaomi.eu_multi_UNICORN_V14.0.22.12.8.DEV_v14-13-fastboot.zip via Fastboot,update.bat.
https://sourceforge.net/projects/xi...mi.eu/MIUI-WEEKLY-RELEASES/V14.0.22.12.8.DEV/
or
Twrp/wipe/format data type yes reboot TWRP.
If errors red lines, start again as many times as necessary, and reboot TWRP each time you format.
Then put the rom in the internal storage or use OTG,and flash it
.
NOSS8 said:
Eu lhe disse para remover a segurança da tela de bloqueio, mas esse não é o problema.
Ou você deseja manter seus dados e instalar xiaomi.eu_multi_UNICORN_V14.0.22.12.8.DEV_v14-13-fastboot.zip via Fastboot,update.bat.
https://sourceforge.net/projects/xi...mi.eu/MIUI-WEEKLY-RELEASES/V14.0.22.12.8.DEV/
ou
Twrp/wipe/format tipo de dados sim reinicia o TWRP.
Se houver erros nas linhas vermelhas, reinicie quantas vezes forem necessárias e reinicie o TWRP sempre que formatar.
Em seguida, coloque a rom no armazenamento interno ou use o OTG e faça o flash
.
Click to expand...
Click to collapse
It's safe to install this version of xiaomi.eu_multi_UNICORN_V14.0.22.12.8.DEV_v14-13 via Fastboot? The MUI 14 it's already stable to Xiaomi 12s Pro?
mlopess said:
It's safe to install this version of xiaomi.eu_multi_UNICORN_V14.0.22.12.8.DEV_v14-13 via Fastboot? The MUI 14 it's already stable to Xiaomi 12s Pro?
Click to expand...
Click to collapse
The Weekly are not stable(beta) and are updated every week, I have always used Weekly when they are available without problem.
This is the only test to do to save your data and it is not sure that it works because of the previous operations, especially the first one.
If that doesn't work you will need to format the data.
NOSS8 said:
Os Weekly não são estáveis (beta) e são atualizados toda semana, sempre usei o Weekly quando estão disponíveis sem problema.
Este é o único teste a fazer para salvar seus dados e não é certo que funcione por causa das operações anteriores, principalmente a primeira.
Se isso não funcionar, você precisará formatar os dados.
Click to expand...
Click to collapse
This phone is new, so don't have new data, so I can format.
In this case, the best solution it's to install the MUIU 13 with the fastboot, right? Because my TWRP isn't working fine. If yes, can you provide me the latest version on MUIU stable with the fastboot, please?
mlopess said:
This phone is new, so don't have new data, so I can format.
In this case, the best solution it's to install the MUIU 13 with the fastboot, right? Because my TWRP isn't working fine. If yes, can you provide me the latest version on MUIU stable with the fastboot, please?
Click to expand...
Click to collapse
The Twrp works, it's just that you used an old version without respecting the procedure.
The latest Fastboot rom is an old rom and you will need to update it using OTA and TWRP.
xiaomi.eu_multi_UNICORN_V13.0.12.0.SLECNXM_v13-12-fastboot.zip
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/
If you flash this rom you must use First install.bat
Related
I don't have this device anymore so I can't continue with this project, the ROM have some bugs ok. Flash at your own risk!
Ladies & Gentlemen I present to you:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As I know there's not ROMS for this device on XDA so I decided to create this one, "AOTI Lite" is a super slim Stock ROM for the "Alcatel One Touch Idol" 6030a (maybe works on 6030 and 6030x but isn't tested on those devices so please let us know if works) I deleted all Telcel apps, some unnecessary apps from Alcatel and a lot off Google apps (you can download on Playstore). I also put in some scripts for better performance.
Click to expand...
Click to collapse
Features:
- Pre-Rooted.
- Init.d support.
- Insecured kernel.
- Without bloatware/brandware.
- Dark theme by default.
- Alcatel One Touch Bootanimation.
- Some build.prop tweaks.
- Some init.d tweaks.
Thanks to:
_zeppelinrox
_pikachu01
_slaid480
_Exit_Only
- Super light.
- Fast, smooth, stable!
Click to expand...
Click to collapse
Know bugs:
- Games don't work properly (low memory notification)
- Force close on:
- Phone keyboard (when you try to copy/paste or delete something).
- Settings (when you try to select lock pattern).
Click to expand...
Click to collapse
Necessary files:
- Framaroot-1.6.1.apk (thanks to alephzain)
- Mobileuncle-MTK-Tools.apk
- recovery.TWRP.img (thanks to The Solutor).
- ROM AOTI_Lite_1.2.zip
- md5 AOTI_Lite_1.2.md5
Old Versions:
AOTI_Lite_1.1.zip
AOTI_Lite_1.1.md5
AOTI_Lite_1.0.zip
AOTI_Lite_1.0.md5
Click to expand...
Click to collapse
Before starting please backup your current ROM following this tutorial:
- http://alcatelstar.blogspot.mx/2013...-backup-alcatel-star-idol-xpop-mpop-spop.html
Click to expand...
Click to collapse
Tutorial (Only needed if you don't have a custom recovery already installed):
- Download all necesary files and move it to SD card Root folder.
- Run your file manager, search Framaroot, install it and run it.
- Touch on "Borimir" and reboot your device.
* At this point is necessary make a backup for your data because a Factory Reset is necesary, you can use Titanium Backup or similar app.
- Now install "Mobileuncle Tools".
- Give it root acces.
- Go to "Change Recovery".
- Select "recovery.TWRP.img", acept, and reboot into recovery.
- Go to Wipe, Factory Reset and confirm. (This is extremely necessary)
- Now go back and click on Install, search the ROM and install it.
- Reboot and enjoy!
Click to expand...
Click to collapse
If you whant to go back to stock you have two options:
1.- Download this: ALCATEL-ONE-TOUCH-6030A_130927_ForFlashtoolFromReadBack_131022-231427.zip unzip it some place on your PC and follow this tutorial from point 9:
http://alcatelstar.blogspot.mx/2013/08/how-to-restore-backup-alcatel-idol-star.html
2.- Download ONE TOUCH Upgrade
- Just install it, select 6030 and follow the instructions.
Click to expand...
Click to collapse
Caps:
Click to expand...
Click to collapse
Reserved...
Thanks for this rom... I have 6030X, so I do not know how this rom works, but thanks anyway...
This is stock based rom, but on which stock 01001, 01003...? Stock for Orange San Remo, or OT 6030a because there's a diference...
Is based on 01001 OT 6030a I know there's a difference so I don't know if will work on an 6030x can you test it please? This ROM only touch this partitions:
- System
- Custpack
- Boot
So isn't to dangerous.
If doesn't work you can restore a backup easily using "SP Flash Tool"
Enviado desde mi ALCATEL ONE TOUCH 6030A usando Tapatalk
This rom does not work on 6030X...
Anyway, can you post tut about how to make this kind of custom rom for 6030X, what I need, how to dump or something...
Do you know which apk is for locker, because you have stock android locker, we on 6030X have slide lock by Alcatel...
Can you upload a backup for your device? Or link me. Maybe I can create a ROM for 6030x, is easier than make a tuto
Enviado desde mi ALCATEL ONE TOUCH 6030A usando Tapatalk
TWRP backup?
SP Flash Tools/MTK Tools
Enviado desde mi ALCATEL ONE TOUCH 6030A usando Tapatalk
How to make the copy SP Flash Tools/MTK Tools
http://alcatelstar.blogspot.mx/2013...-backup-alcatel-star-idol-xpop-mpop-spop.html
http://alcatelstar.blogspot.mx/2013/08/how-to-restore-backup-alcatel-idol-star.html
http://alcatelstar.blogspot.mx/2013...-backup-alcatel-star-idol-xpop-mpop-spop.html
http://alcatelstar.blogspot.mx/2013/08/how-to-restore-backup-alcatel-idol-star.html
I think in continue the project, i have the phone. i can try?
Sure you can, I just want to make a final release maybe will be stable enough
Enviado desde mi Motorola Razr HD mediante Tapatalk
Cool, now i wait the stable version , meaby i can try ti help you...
Pd. Es tiempo de experimentar con el celular de mi novia.
Sent from my XT890 using xda app-developers app
Hi. Finally after searching all over the internet I've found this ROM which is the closest for my device. There isn't any other ROM actually. I do have the 6030D (has a gig of RAM). Could this ROM work on my device? I've also seen some bugs listed on the first post. Are they solved?
Thanks.
Android Version
DorianX said:
Reserved...
Click to expand...
Click to collapse
What was the Android version?
Instale todo y por fin arranco el celular ya que había instalado otra rom pero era para el 6030x porque me salia doble sim card y me daba señal y se iba entonces encontré este post y me encendió super bien pero ahora tengo un dilema que me pide condigo de desbloqueo de red y no cuento con sigma o cosas de esas para realizar el desbloqueo ahí algún código que lo pueda quitar de antemano gracias
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is Init.d?
Init.d is a feature which allows you to run brunch of scripts at boot . Thats really useful while you want to set values which reset at boot or run/do any thing at every boot or install tweaks , engines and....
Click to expand...
Click to collapse
Use it at Your Own Risk!!!!!!!!
Here is the stock kernel Init.d support for Samsung Galaxy Core 2 SM-G355M
What is needed :
1. Custom Recovery
2. Busybox pre installed or install BusyBox 1.23 update script just because it use busybox run-parts command to execute the scripts from /system/etc/init.d directory.
Click to expand...
Click to collapse
The ramdisk init.rc have new service usrinit :
Code:
service sysinit /system/bin/logwrapper /system/xbin/busybox run-parts /system/etc/init.d
disabled
oneshot
First it set the scripts permissions in /system/etc/init.d as executable, and then the run-parts launch them all.
How to :
1. Download init.d_by_Dhruvit_G355M.zip and place it in Sdcard.
2. Go to Recovery and choose install zip from sdcard.
3. Select init.d_by_Dhruvit_G355M.zip
4. Enjoy!!
Click to expand...
Click to collapse
Download Link -init.d_by_Dhruvit_G355M
Updated - [Updated]init.d_by_Dhruvit_G355M
After the boot check the file /data/Test.log and check if the installation succeeded.
Warning :
Backup your kernel ( Boot ) first and then test it !
Feel free to post some. Hit thanks if it works !
Regards !
Works bro!!! THANKS @Dhruvit Pokharna
@FedericoPeranzi you have flashed this zip with stock recovery or custom recovery
Dhruvit Pokharna said:
@FedericoPeranzi you have flashed this zip with stock recovery or custom recovery
Click to expand...
Click to collapse
With custom recovery, i used CWM
CWM by Cleverior is it working for G355M
Dhruvit Pokharna said:
CWM by Cleverior is it working for G355M
Click to expand...
Click to collapse
i dont know what init.d do
it runs scripts which can be edited,deleted,created at any time . if you do not have init.d then you have to edit boot.img everytime . and it can zipalign apps at every boot
@Dhruvit Pokharna Thanks for the update bro!!!
My SIM card stopped working after flash it
It Does Not affect your sim card so this problem is caused by something else
Grindher said:
My SIM card stopped working after flash it
Click to expand...
Click to collapse
Same here, do you fix it? And how?
Attemahawke said:
Same here, do you fix it? And how?
Click to expand...
Click to collapse
i m sorry but i dont know what the problem is
Attemahawke said:
Same here, do you fix it? And how?
Click to expand...
Click to collapse
Grindher said:
My SIM card stopped working after flash it
Click to expand...
Click to collapse
Check mine kernel
http://forum.xda-developers.com/galaxy-core/development/mod-samsung-galaxy-core-2-t3242613
FedericoPeranzi said:
Check mine kernel
http://forum.xda-developers.com/galaxy-core/development/mod-samsung-galaxy-core-2-t3242613
Click to expand...
Click to collapse
Sigue sin funcionar mi SIM amigo, tengo la version de banda base diferente y el kernel de mi pais(Mexico) no se ha actualizado aun como el tuyo(Argentina).. sabras que puede pasar?
Attemahawke said:
Sigue sin funcionar mi SIM amigo, tengo la version de banda base diferente y el kernel de mi pais(Mexico) no se ha actualizado aun como el tuyo(Argentina).. sabras que puede pasar?
Click to expand...
Click to collapse
English bro!
You have to update manually vía ODIN, with the last version of the firmware "G355MUBU0AOI4" and then install the updated kernel, and problem solved
FedericoPeranzi said:
English bro!
You have to update manually vía ODIN, with the last version of the firmware "G355MUBU0AOI4" and then install the updated kernel, and problem solved
Click to expand...
Click to collapse
Hi & thanks Federico! I think what you say about the rom update via ODIN, can do it. But i don´t know how update kernel... Could you explain it?
(sorry for my bad english...)
riomah said:
Hi & thanks Federico! I think what you say about the rom update via ODIN, can do it. But i don´t know how update kernel... Could you explain it?
(sorry for my bad english...)
Click to expand...
Click to collapse
Just follow my post here
http://forum.xda-developers.com/galaxy-core/development/mod-samsung-galaxy-core-2-t3242613
FedericoPeranzi said:
Just follow my post here
http://forum.xda-developers.com/galaxy-core/development/mod-samsung-galaxy-core-2-t3242613
Click to expand...
Click to collapse
Federico, i'v quoted you in oher post, now i find this. is this an Unbranded ROM for CoreII or this is just a simil root to access values and similar? (No se si me logro explicar, es un ROM entero o solo una modificacion sobre el original?)
I have my CoreII rooted, and with the famous link2sd for apps in the SD. But nothing else changed.
By the way, i would like to save the original rom just in case, how do i copy the rom from the phone? any tutorial for me?
thanks in advance!
Grindher said:
My SIM card stopped working after flash it
Click to expand...
Click to collapse
Same problem for me also bro.. no network after flashing...
cabe72000 said:
Federico, i'v quoted you in oher post, now i find this. is this an Unbranded ROM for CoreII or this is just a simil root to access values and similar? (No se si me logro explicar, es un ROM entero o solo una modificacion sobre el original?)
I have my CoreII rooted, and with the famous link2sd for apps in the SD. But nothing else changed.
By the way, i would like to save the original rom just in case, how do i copy the rom from the phone? any tutorial for me?
thanks in advance!
Click to expand...
Click to collapse
Yes you have to download first the Unbranded ROM, compilation G355MUBU0AOI4, and flash it with ODIN, and then flash my Kernel, i posted here: http://forum.xda-developers.com/galaxy-core/development/mod-samsung-galaxy-core-2-t3242613
Upgrade Lenovo Xiaoxin P11 Pro 2021 to ZUI 14 via OTA (TB-J716F)
!!! ATTENTION !!!
I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO THE DEVICE, USE AT YOUR OWN RISK.
Check list:
1. Have the tablet Lenovo Xiaoxin P11 Pro 2021 (TB-J716F)
2. Stock ROM
3. Bootloader locked
4. All available OTAs installed, if you don't have it you can use the VPN described below until you get to 14.0.127.
How to do it:
1. Install Returnees vpn app
2. Log in using google account in the app
3. Select a free server from the list and connect, I used ShangHai(free)
4. Open System Update and check for Updates, it should show the version 14.0.127
5. Start the download, after starting go back to the VPN and disconnect, so you will have your full speed for the download and won't consume the quota on the VPN app.
6. After finishing the Upgrade, Install Google Services Framework 12 (Android 12+) , so you will get back google services
7. If you don't have play store install through Lenovo App center that comes with the device.
Notes:
1. I didn't lose Widevine L1
2. I'm able now to connect into 5g networks
3. The tablet performance is much better
Thanks to @carlosfla21 and @titos88
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you share your fpinfo partition? I need yours to compare with mine
thien.nm2905 said:
Can you share your fpinfo partition? I need yours to compare with mine
Click to expand...
Click to collapse
Sure, I hope it helps.
gabriel6891 said:
Sure, I hope it helps.
Click to expand...
Click to collapse
Thanks, I checked, widevine L1 is not belong fpinfo, so poor cause mine is L3 with bootloader locked and google certificated
thien.nm2905 said:
Thanks, I checked, widevine L1 is not belong fpinfo, so poor cause mine is L3 with bootloader locked and google certificated
Click to expand...
Click to collapse
Mine wasn't WV1 as well, so I followed this tutorial, and got WV1 and OTA working.
gabriel6891 said:
Mine wasn't WV1 as well, so I followed this tutorial, and got WV1 and OTA working.
Click to expand...
Click to collapse
Ya, I did it, but not working for me, I had flashed rom with erased all option (my misstake)
thien.nm2905 said:
Ya, I did it, but not working for me, I had flashed rom with erased all option (my misstake)
Click to expand...
Click to collapse
Did you restore your serial number?
gabriel6891 said:
Did you restore your serial number?
Click to expand...
Click to collapse
Ya, I did it, same yours, replace with my serial on back side
I am wondering what is your Play Protect certified status after the OTA update?
Please, can anyone record us a video about Z14 on the TB-J716F ?
Thank you in advance !!
Does this wipe your internal storage?
supertory said:
Does this wipe your internal storage?
Click to expand...
Click to collapse
It's an incremental update. So , No
thien.nm2905 said:
Ya, I did it, but not working for me, I had flashed rom with erased all option (my misstake)
Click to expand...
Click to collapse
Man, you put me in doubt, I don't know if I selected the same option too .. How can I know ? Note that I never had to restore my SN, and it is still there. Does this mean that I did not do it ?
When I locked my bootloader I had L1 certificate. A week ago, I discovered that my widevine certificate downgraded to L3 and that the 'OEM CRYPTO API Version' moved to version 15 (it should be on v16) , so I tried to flash ZUI 14 thinking it would fix the problem but no it did not..
I then unlocked the bootloader downgraded back to ZUI 12 .211 , naturally the widevine certificate was still on L3 but the 'OEM CRYPTO API Version' upgraded back to v16 ! , I did all the manual updates up to ZUI13 .560 and I was still on v16. When I upgraded through OTA to ZUI 14 it downgraded back to v15. Locking the bootloader didn't fix the problem either ...
Can you unlock the bootloader after updating this rom?
gabriel6891 said:
Mine wasn't WV1 as well, so I followed this tutorial, and got WV1 and OTA working.
Click to expand...
Click to collapse
Which portion of the tutorial did you follow? I'm on zui14 but still WV3.
darrel_xda said:
Which portion of the tutorial did you follow? I'm on zui14 but still WV3.
Click to expand...
Click to collapse
I followed everything, from install to lock bootloader, but at the time, my ROM was on version 12.
I don't know if you can use it when already in zui14.
gabriel6891 said:
Upgrade Lenovo Xiaoxin P11 Pro 2021 to ZUI 14 via OTA (TB-J716F)
!!! ATTENTION !!!
I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO THE DEVICE, USE AT YOUR OWN RISK.
Check list:
1. Have the tablet Lenovo Xiaoxin P11 Pro 2021 (TB-J716F)
2. Stock ROM
3. Bootloader locked
4. All available OTAs installed, if you don't have it you can use the VPN described below until you get to 14.0.127.
How to do it:
1. Install Returnees vpn app
2. Log in using google account in the app
3. Select a free server from the list and connect, I used ShangHai(free)
4. Open System Update and check for Updates, it should show the version 14.0.127
5. Start the download, after starting go back to the VPN and disconnect, so you will have your full speed for the download and won't consume the quota on the VPN app.
6. Depois de terminar a atualização, instale o Google Services Framework 12 (Android 12+) , assim você terá de volta os serviços do Google
7. Se você não tiver a Play Store, instale-a por meio do Lenovo App Center que acompanha o dispositivo.
Notas:
1. Não perdi Widevine L1
2. Agora posso me conectar a redes 5g
3. O desempenho do tablet é muito melhor
Obrigado a @carlosfla21 e @titos88
View attachment 5768251
View attachment 5768253
Click to expand...
Click to collapse
Poderia fazer o backup da sua ROM atualizada com o QFIL e fazer o upload?
Bom pessoal, consegui fazer a atualização via OTA para ZUI 14 mesmo com bootloader desbloqueado seguindo as instruções. A ZUI 14 é horrivel, você perderá varias funções atualizando para ela como o PC-MODE, a Melhor versão é ZUI 13.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Corvus OS is based on AOSP, with all the useful features required. Our objective is stability while being feature-rich at the same time.
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
BUGS:-You tell me
Links:
Rom: https://sourceforge.net/projects/ti..._arm64_ab-Gapps-Official-0103.img.xz/download
Used stock Samsung Kernel in my testing,
Not sure about others.
PROCEED WITH CAUTION!!!!!!!!
Install-
1.Need TWRP 3.4.0 or higher!
2. Go to TWRP and do wipe data-yes
3. Make Wipe data, cache, cache-Dalvik in advanced wipe
4. Flash the file then flash gapps
5. If you want flash magisk flash it
Camera works but use gcam go mod by greatness https://www.celsoazevedo.com/files/android/google-camera/dev-greatness/f/dl9/
Please test the ROM and share ur feedback
NB: Gapps already included .
Funciona para partición de sistema de solo A ?
When I go to register the fingerprint to unlock by fingerprint, the green light does not appear on the screen and it does not work
Coxinha2139 said:
When I go to register the fingerprint to unlock by fingerprint, the green light does not appear on the screen and it does not
Click to expand...
Click to collapse
All roms and Gsi for this phone do not have working fingerprints
does this rom have sim bug? (no signal)
Noxii said:
does this rom have sim bug? (no signal)
Click to expand...
Click to collapse
If your device is with vendor and product stock, you will not have the bug
Sorry for my English, I'm using Google translator
Coxinha2139 said:
If your device is with vendor and product stock, you will not have the bug
Sorry for my English, I'm using Google translator
Click to expand...
Click to collapse
okay, thanks
I am sending the link of "vendor" and "product" that I use on my device, in case you are having the sim bug
Vendor.img: https://drive.google.com/file/d/1OpDuEW2Ilyvv_H08vPI2whFkayfznc7-/view?usp=share_link
Product.img: https://drive.google.com/file/d/1BBjuBBGeeTbJtIupdBVLehPRkbGXX6Yn/view?usp=share_link
Edit: Works on model a307gt
Coxinha2139 said:
I am sending the link of "vendor" and "product" that I use on my device, in case you are having the sim bug
Vendor.img: https://drive.google.com/file/d/1OpDuEW2Ilyvv_H08vPI2whFkayfznc7-/view?usp=share_link
Product.img: https://drive.google.com/file/d/1BBjuBBGeeTbJtIupdBVLehPRkbGXX6Yn/view?usp=share_link
Edit: Works on model a307gt
Click to expand...
Click to collapse
which region is this from
Ahmed9193 said:
which region is this from
Click to expand...
Click to collapse
I don't know how to answer you, sorry
I'm from Brazil, and for me it worked perfectly
im from poland
Noxii said:
im from poland
Click to expand...
Click to collapse
Oh, I don't know if this "vendor" and "product" will work for you
R3v3nt0n14 said:
View attachment 5819807
Corvus OS is based on AOSP, with all the useful features required. Our objective is stability while being feature-rich at the same time.
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
BUGS:-You tell me
Links:
Rom: https://sourceforge.net/projects/ti..._arm64_ab-Gapps-Official-0103.img.xz/download
Used stock Samsung Kernel in my testing,
Not sure about others.
PROCEED WITH CAUTION!!!!!!!!
Install-
1.Need TWRP 3.4.0 or higher!
2. Go to TWRP and do wipe data-yes
3. Make Wipe data, cache, cache-Dalvik in advanced wipe
4. Flash the file then flash gapps
5. If you want flash magisk flash it
Camera works but use gcam go mod by greatness https://www.celsoazevedo.com/files/android/google-camera/dev-greatness/f/dl9/
Please test the ROM and share ur feedback
NB: Gapps already included .
Click to expand...
Click to collapse
Volume control lost, i can't up or down volume, some minor bugs in animations, but rom port is 9/10
TylerMv2 said:
Volume control lost, i can't up or down volume, some minor bugs in animations, but rom port is 9/10
Click to expand...
Click to collapse
Bluetooth does'nt work, work one time and don't work anymore, is show silence but i don't have silenced the phone
Has anyone managed to find any camera apk which actually supports the ultrawide mode?
R3v3nt0n14 said:
View attachment 5819807
Corvus OS is based on AOSP, with all the useful features required. Our objective is stability while being feature-rich at the same time.
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
BUGS:-You tell me
Links:
Rom: https://sourceforge.net/projects/ti..._arm64_ab-Gapps-Official-0103.img.xz/download
Used stock Samsung Kernel in my testing,
Not sure about others.
PROCEED WITH CAUTION!!!!!!!!
Install-
1.Need TWRP 3.4.0 or higher!
2. Go to TWRP and do wipe data-yes
3. Make Wipe data, cache, cache-Dalvik in advanced wipe
4. Flash the file then flash gapps
5. If you want flash magisk flash it
Camera works but use gcam go mod by greatness https://www.celsoazevedo.com/files/android/google-camera/dev-greatness/f/dl9/
Please test the ROM and share ur feedback
NB: Gapps already included .
Click to expand...
Click to collapse
I loved it Thank you For your good work, sorry my English I'm in translator
How these files are supposed to be flasehd? TWRP doesnt work for it. And btw i use black twrp after countless errors during flashing recovery process. Other versions do strange thing, when it show splash screen all goes green then screen just go off but windows recognizes the phone as when you load system.
electronic_dream said:
¿Cómo se supone que estos archivos son flasehd? TWRP no funciona para ello. Y por cierto, uso twrp negro despuée innumerables errores durante el proceso de recuperación intermitente. Otras versiones hacen cosas extrañas, cuando se muestra la pantalla de bienvenida, todo se vuelve verde, luego la pantalla simplemente se apaga, pero Windows reconoce el teléfono como cuando carga el sistema.
Click to expand...
Click to collapse
Use Orange Fox only works with Android 10
To flash this use TWRP 3.5.1 then upgrade from AY to TWRP 3.7.0
link twrp a30s 3.7.0: https://apkadmin.com/avyk726b124d/twrp-3.7.0_11-a30s.img.html
To fix green logo after installing TWRP use Samfirm in ADB options restart in download mode
Kevin sagonsa said:
I loved it Thank you For your good work, sorry my English I'm in translator
Click to expand...
Click to collapse
Glad u liked it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MyUi 5.0 [] Moto One Fusion+
Android 13 Stock
Date: 02/01/2023
Build: Stock 13
Dev: @Veeronez
Changelog:
- Face unlock
- 4GB ram boost
- Improved performance and compatibility
- Vendor r/w with multi-task optimizations and forced encryption disabled
- Moto Dolby (magisk module)
- January 2023 security patch
- New motocam 2.
Notes
After the first boot, register the fingerprint, then install the fix fod module to fix the fingerprint icon on the lock screen
After completing the setup, go to Settings/Applications/Default Apps, select the dialer app as the default app for calls
bugs:
let me know if you find
Installation ↓
Extract it on the computer and run the automatic installer to match your phone model (gooddix or fpc)
Download
- Gdrive -
If Motorola doesn't do it, I will.
Kernel Source: Latest Stock
Hello, sorry for stupid question, but bootloader must be unlocked for this ROM?
LisuR said:
Hello, sorry for stupid question, but bootloader must be unlocked for this ROM?
Click to expand...
Click to collapse
Yes
I had decided to go back to the stock firmware for my One Fusion + and saw your post. I have since switched to MYUI 5.0 Stock. How ever in doing so, it removed the Lineage OS custom recovery and has put and older version of TWRP back. It's not a big deal breaker, but, when I try and boot into TWRP it just blinks over and over. I can power off the phone and reboot it, no big deal. But, I was wondering if there was, and Android 13 OEM Recovery image for the Motorola One Fusion + I can download, and flash it too? Or and updated TWRP for Android 13? I believe the blinking is due to the incompatibilities of TWRP being a lower version and the MYUI being Android 13, lol.
Any hoot, Any help you or some one else here could provide would be awesome and much appreciated! Thanks!
I just want to know there is any way to extend themed icon on myui 5
La puedo instalar en mi Motorola Edge Plus xt2061-3?
Mod Edit: English Translation Below
Can I install it on my Motorola Edge Plus xt2061-3?
POSSO INSTALAR VIA TWRP?
Mod Edit: English Translation Below
CAN I INSTALL VIA TWRP?
arksoother said:
I had decided to go back to the stock firmware for my One Fusion + and saw your post. I have since switched to MYUI 5.0 Stock. How ever in doing so, it removed the Lineage OS custom recovery and has put and older version of TWRP back. It's not a big deal breaker, but, when I try and boot into TWRP it just blinks over and over. I can power off the phone and reboot it, no big deal. But, I was wondering if there was, and Android 13 OEM Recovery image for the Motorola One Fusion + I can download, and flash it too? Or and updated TWRP for Android 13? I believe the blinking is due to the incompatibilities of TWRP being a lower version and the MYUI being Android 13, lol.
Any hoot, Any help you or some one else here could provide would be awesome and much appreciated! Thanks!
Click to expand...
Click to collapse
I was getting the same problem and to solve it I needed to revert back to stock rom, including recovery, then installed the rom making sure I was using cmd because windows terminal was returning fastboot errors. Try this and let me know if works.
Some bugs I've found:
- The background flicker into the action center and recent apps
- If you tap and hold the battery saver icon in the action center it will not open the battery settings page
- Battery usage seems higher then expected
- Sushi Launcher breaks and restarts often
- Press and hold the power button does not open power settings
Hey, just tried installing the rom with the auto installer, it installed completely but now stuck at the moto logo.
nvm it booted
Algum tempo usando essa ROM e estava tudo certo, agora o desbloqueio por digital parou e sempre que conecto um dispositivo bluetooth o celular fica em tela preta, desligo o dispositivo que eu conectei e ele volta, mas reseta todas as opções de aparência
Blu3zinn said:
Algum tempo usando essa ROM e estava tudo certo, agora o desbloqueio por digital parou e sempre que conecto um dispositivo bluetooth o celular fica em tela preta, desligo o dispositivo que eu conectei e ele volta, mas reseta todas as opções de aparência
Click to expand...
Click to collapse
tenta fazer um dirty flash. vai na pasta do instalador da rom e edita com o bloco de notas o auto installer. é só apagar a linha fastboot -w, salva e executa.
How do I install the fingerprint icon module to fix it?I have no idea
Ahaan007 said:
How do I install the fingerprint icon module to fix it?I have no idea
Click to expand...
Click to collapse
To install the module you'll need to install magisk first
Is this really working on one fusion+? and is it laggy? and are fingerprint and front camera working?
For anyone wondering, it's working. Only things that don't work are Ready For and google assistant button
_zaginiony_ said:
For anyone wondering, it's working. Only things that don't work are Ready For and google assistant button
Click to expand...
Click to collapse
So how's the overall experience as compared to Stock A11,
Battery backup, dual volte, any other thing you noticed?
Also, some screenshots would be much appreciated.