So, recently I installed pixel experience on my phone but there is a problem and that's when I connect the charger it says charging then charging slowly, then charging rapidly and it disconnects (this doesn't happen with the official cable tho)
Only when I'm using my mi cable that I bought online, I have to go to twrp, connect the charger and restart to use the system while charging
I used magisk modules such as xcharge, super fast charge, get super fast charge fast, and some unofficial modules but they didn't work
But without the modules the twrp method doesn't work
Please help me, looking towards for inner peace cuz this is so annoying it runs on my mind and idk what to do please help me
Pixel experience 13, Poco x3 pro vayu
Maybe try other custom kernel? Like kangaroo or no gravity kernel
samsungics1200 said:
Maybe try other custom kernel? Like kangaroo or no gravity kernel
Click to expand...
Click to collapse
Ok i will try
Related
Hello,
I have done clean install of 'Lineage-14.1-20170213-nightly' recently using TWRP recovery.But facing phone charging issue after Lineage flash.
Battery is not charging (30% charged after 8 hours)/Taking unusual time. As i have taken nandroid backup before Lineage flash, switched back to test CM13.1. In CM13, Charging works flawlessly.
For testing, Clean flashed Lineage 14.1 nightly again . Still facing same charging issue. Anyone has same problem/ has solution??
Note: TWRP installed, Bootloader unlocked, No custom kernel.
Thanks
Arjun89 said:
Hello,
I have done clean install of 'Lineage-14.1-20170213-nightly' recently using TWRP recovery.But facing phone charging issue after Lineage flash.
Battery is not charging (30% charged after 8 hours)/Taking unusual time. As i have taken nandroid backup before Lineage flash, switched back to test CM13.1. In CM13, Charging works flawlessly.
For testing, Clean flashed Lineage 14.1 nightly again . Still facing same charging issue. Anyone has same problem/ has solution??
Note: TWRP installed, Bootloader unlocked, No custom kernel.
Thanks
Click to expand...
Click to collapse
Why don't you use custom kernel?
Mr.Ak said:
Why don't you use custom kernel?
Click to expand...
Click to collapse
I have just mentioned, No custom kernel installed. Please suggest if any custom kernel helps solving charging issue.
I have also observed that, 2ACharger comes with 'One plus one' charging rate (as in ampere app) min:120 Max:230mA. But when i use other 1A charging rate is high min:600mA Max:780mA.
Arjun89 said:
I have just mentioned, No custom kernel installed. Please suggest if any custom kernel helps solving charging issue.
I have also observed that, 2ACharger comes with 'One plus one' charging rate (as in ampere app) min:120 Max:230mA. But when i use other 1A charging rate is high min:600mA Max:780mA.
Click to expand...
Click to collapse
Use @erorcun 's latest 3.10 kernel.It solved issue for me on RR.
https://forum.xda-developers.com/on...opo-3-10-kernel-features-implemented-t3379135
Mr.Ak said:
Use @erorcun 's latest 3.10 kernel.It solved issue for me on RR.
https://forum.xda-developers.com/on...opo-3-10-kernel-features-implemented-t3379135
Click to expand...
Click to collapse
I have flashed the kernel. Charging working fine now. Thanks
Arjun89 said:
I have flashed the kernel. Charging working fine now. Thanks
Click to expand...
Click to collapse
I'm glad it worked.
It seems sometimes when i charge my phone it reboots and gets stuck then i just power it off and on and everything is good running exkernel no limit magisk module and a few others on the latest beta
You posted in wrong place bro... Btw deactivate all magisk modules and try... Maybe you have some custom kernel?
I bet it's substratum's fault.
Before I decided to root my 8t charging with warp charge 65 wasn't getting my phone warmer than 20-25°C. After unlocking my bootloader and trying out the two available custom roms I deciced to reflash the stock rom using the MsmDonwloadTool and rooting with Magisk I noticed that my phone became hotter when charging. Nothing I had to really worry about, maybe it got 25-30°C warm.
Did you experience similar issues?
My model is KB2003, EU firmware (KB05BA).
I think it's placebo.
Just recently got myself a Poco F2 Pro which I'm very happy with. Currently waiting the 168 hours in order to unlock the bootloader.
I used to have a Samsung Galaxy Note but the features of this phone were to appealing to turn it down especially the 100% uninterrupted display.
Just after some recommendations on which rom to run & do any of them support exfat via usb otg as fat32 has its drawbacks.
Currently running Global Miui 12.5.2 but thinking of going for the latest weekly EU version of Miui.
Any advice or help would be really appreciated.
Thanks
mike710_0 said:
Just recently got myself a Poco F2 Pro which I'm very happy with. Currently waiting the 168 hours in order to unlock the bootloader.
I used to have a Samsung Galaxy Note but the features of this phone were to appealing to turn it down especially the 100% uninterrupted display.
Just after some recommendations on which rom to run & do any of them support exfat via usb otg as fat32 has its drawbacks.
Currently running Global Miui 12.5.2 but thinking of going for the latest weekly EU version of Miui.
Any advice or help would be really appreciated.
Thanks
Click to expand...
Click to collapse
Use this Twrp https://androidfilehost.com/?fid=17248734326145679747
Twrp : wipe format data write YES
reboot twrp
flash rom
First boot takes 5/6 minutes
i would recommend you to install recovery twrp 3.5 ,not below 3.5 otherwise you would get encryption problems
bilalrajput said:
i would recommend you to install recovery twrp 3.5 ,not below 3.5 otherwise you would get encryption problems
Click to expand...
Click to collapse
When you update or make a modification with Twrp it is important to remove the protection of the lock screen (password, pin etc.) which will remove the encryption and avoid the problems encountered by some.
NOSS8 said:
When you update or make a modification with Twrp it is important to remove the protection of the lock screen (password, pin etc.) which will remove the encryption and avoid the problems encountered by some.
Click to expand...
Click to collapse
WHY NOT BETTER INSTALL 3.5 VERSION TO REMOVE THOSE ISSUES AS WELL DUDE,I AM USING THE SAME 3.5
bilalrajput said:
WHY NOT BETTER INSTALL 3.5 VERSION TO REMOVE THOSE ISSUES AS WELL DUDE,I AM USING THE SAME 3.5
Click to expand...
Click to collapse
Lots of soft brick / hard brick with this one.
NOSS8 said:
Lots of soft brick / hard brick with this one.
Click to expand...
Click to collapse
i never got hard bricked,still using the same twrp 3.5
HUGE thank you for saying twrp 3.5! You were 100% correct about 3.4.2 causing encryption problems
Hello,i'm using EvoX and NoGravity kernel. I installed NoGravity because i thought the default kernel was limiting my charging (Deathrhytm, and limiting under 6W), so i installed nogravity, but now, my phone keeps disconnecting and reconnecting to the power by itself, and i cant find any download link for the default kernel anymore, anyone help please, 4.14.303-DeathRhythm
Hmm if you tell me how I could dump you my poco x3 Pro kernel xiaomi.eu 14.0.1.0 android 13.
If it helps.
Formexus said:
Hello,i'm using EvoX and NoGravity kernel. I installed NoGravity because i thought the default kernel was limiting my charging (Deathrhytm, and limiting under 6W), so i installed nogravity, but now, my phone keeps disconnecting and reconnecting to the power by itself, and i cant find any download link for the default kernel anymore, anyone help please, 4.14.303-DeathRhythm
Click to expand...
Click to collapse
Flash the same version ROM again, as an update.
pl1992aw said:
Flash the same version ROM again, as an update.
Click to expand...
Click to collapse
works!!