I've tried looking but can't find a post that lists it. It's my understanding that the Pixel 7 Pro has disabled the USB C Alt mode in the kernel. I'm wondering if any of the kernels or custom roms address this and have re-enabled it?
Related
Hi Guys,
I'm a Chinese N5 user. We can use our N5 on China Telecom network now. I think it's similar for you to make your N5 work on VZW network. And I know the key point for this is to find out and get into Diagnostic mode of N5.
Here, I release the modified boot kernel with diag mode enabled. You can run fastboot to make it.
After that, 'setprop sys.usb.config diag,adb' works. The DIAG COM port appeared.
LGE AndroidNet USB Serial Port
OK. Enjoy your VZW cracking process. Hope you can make it later soon!:laugh::laugh:
Hello. Im having the same problem. Could you make a more specific tutorial to make diag mode work? How do i flash the file on the OP? I need to program my N5 to work with an cdma carrier, and as you know, i cant do anything without the diag mode.
Help please
I'm trying to use CDMA Workshop to do a partial flash on my phone from Verizon to PagePlus. I can't figure out how to get CDMA Workshop and CM11 to play together nicely with me. At first I could not find the port in Win8.1 or CDMA Workshop, but then I found an online post on using a 3rd party virtual port program. As a result I did get a port (COM10, port 11008), but when I try to Read in CDMA Workshop I get an error stating the device did not answer (I think because it is still not in diag mode). In CM11 Android Debugging and ADB Over Network (for the virtual port) are on. Anyone know what I'm missing please? Thank you in advance for the help.
Droid Razr HD (XT926) Verizon
CyanogenMod 11 M2
CDMA Workshop v3.9.0
[SOLVED]
first, THANK YOU dragonhart6505 for your youtube vid how to install motorola qc diag driver for unlocking motorola droid razr m/hd (xt907/xt926). your words "hit vol up so phone boots properly" was what i was missing.
my problem was i wasnt really in diag mode. :crying:
heres how i resolved my problem. i went back to stock rom (4.1.1). im not sure, but i think i had to do this. i think nv mode is disabled by custom roms. that didnt resolve my problem completely though. i found out i wasnt really in diag mode (bp tools for my moto). i thought i was booting into bp tools mode. i did the three finger salute. i scrolled to bp tools. let phone boot and plugged it into usb port. no qc port (not even one that needed a driver). couldnt create a virtual serial/com port either using hw vsp. got a lan error. cdma workshop stated no answer from my phone. i could ping the ip though with no errors. all because i wasnt in bp tools mode as i thought! UGHHHHH!!!! after scrolling to bp tools, hit vol up (no dont scroll to factory reset). youll see when you do it. then i was able to manually install the qc driver. then i could read in cdma workshop.
the other thing i learned along the way was that with windows 7/8 (yes, and 8.1) the qc diag driver must be manually installed.
There is a thread about how to put this phone onto Page Plus over on Howard Forums. There may be a mirror of how to do this here as well. Also you do not need CDMA Tools to do this either. There is another thread about trying to put the phone onto Page Plus with the new 4.4.2 software. We have not been successful in that yet. If you do not have an unlocked bootloader then would work on getting that done ASAP.
Jackie
Hi,
for a Project i want to start, i need USB OTG Host mode and Charging at the same time.
I tried some self made cables like in this thread: http://forum.xda-developers.com/showthread.php?t=1822653
this website: https://sites.google.com/site/sonicboomworld/my-projects/otg-diagrams
or this one: http://pinoutsguide.com/PortableDevices/usb_otg_pinout.shtml
i can´t get it to work.. when the resistor is too low, Host mode Starts.. if it is too high, charging mode starts.. but i can´t get both at the same time.
Maybe it´s a kernel thing.. maybe the kernel needs to have an option for this "dualmode".
im using motog 2013 with cm 12.1 (20150612 NIghtly at the moment)
maybe you know of a kernel or a xposed mod, that enables this "dualmode" with OTG and charging at the same time?
thx
could anyone confirm, that this is possible?
how to inject this into a custom made kernel?
possible as a mod? or only within the kernel, when it is compiled?
(im new to this)
*bump*
as title . can I use usb jig with USB C convert to download mode for s8 plus?
I can't find usb jig type c
Sorry my english
There's Type C to Micro USB adapter that comes with S8. Use that.
Have jig for this model?
anyone knows ? Cannot get to download mode on my note 9, and cant find information about jig for USB C
techmasters said:
anyone knows ? Cannot get to download mode on my note 9, and cant find information about jig for USB C
Click to expand...
Click to collapse
Should post in the note 9 forums
TheMadScientist said:
Should post in the note 9 forums
Click to expand...
Click to collapse
but, does a usb type c jig exist? thats the big question here IMO
youdoofus said:
but, does a usb type c jig exist? thats the big question here IMO
Click to expand...
Click to collapse
Yea true. Ive made some trying to get to certain modes. But never really pushed it. There are suposed to be certain resistances. The s8 is different than most if I'm not mistaken. I saw it wrote up some where. If im not mistaken like 301k was one resistance. I dont remember if ot was dl mode or upload.
Hello everyone who may still peruse this section of the forums. I know I have a low post count, but that's cause I normally find answers to my problems by reading... Today is a struggle.
I have recently aquired a Sprint Galaxy Note Edge, it has the n915pvpu5dqi5 firmware installed.
I have followed directions from a couple of different sources and have been able to get freezas Notedge beta rom with the Emotion kernel installed and working, however I'm still limited on LTE bands my phone will connect to.
My intention, and I don't know if it is possible or not, is to use QPST and QXDM to modify my NV memory.
I have reverted back to the original n915pvpu5dqi5 firmware, and I am trying to get into diagnostic mode for QPST.
I used *#66336# and set the CP Debug level to CP RAMDUMP ON.
After reboot I used ##3424# went to Qualcomm USB setting and set RNDIS + DM + MODEM.
When I go into QPST to backup, (using my MSL in the box titled SPC) it starts to Backup NV memory from phone, and it will get to 18% before giving an error that says "Could not communicate in Diagnostic Mode."
Can anyone advise me on how to get into diagnostic mode or if it is possible with this phone being upgraded to the latest bootloader(QI5), or is there another kernel out there other then stock that will allow me to get into diagnostic mode (I'm told a lot of the custom ones cut it out, why? Over my head...) to edit the NV memory and unlock other lte bands
what is QPST ? and what are you trying to accomplish?