If you not like ZUI firmware - you can flash Pseudo_Global to your tablet. I've tested this way and sharing it here.
Pseudo_global fw was built on ZUI, it has A11 inside and you never can to get some system updates - no one is doing them.
Your data will gone away.
YOU ARE WARNED !
And so:
I've tryed this on ZUI 14.0.127 with unlocked bootloader and active slot _a. Active slot can be checked with
Code:
adb shell /bin/getprop ro.boot.slot_suffix
and answer must be _a
If not, you need change boot slot with command in fastboot mode:
Code:
fastboot set_active other
And now you can reboot in EDL mode and start to flash all needed partitions from unpacked archive Pseudo_ROW_J716Fl.7z
You need unpacked ZUI 12.6.211 from lolinet https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/ for working with QPST Partition Manager.
How it looks you can see in this video:
You must flash ALL partitions archive contains. Files in Add.rar not need, it for any case.
MANDATORY ! After flashing you need at first to boot in recovery and make reset to factory settings, it will format userdata. Without this action you can't boot.
Spoiler: IS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good Luck !
f1tm0t said:
If you not like ZUI firmware - you can flash Pseudo_Global to your tablet. I've tested this way and sharing it here.
Pseudo_global fw was built on ZUI, it has A11 inside and you never can to get some system updates - no one is doing them.
Your data will gone away.
YOU ARE WARNED !
And so:
I've tryed this on ZUI 14.0.127 with unlocked bootloader and active slot _a. Active slot can be checked with
Code:
adb shell /bin/getprop ro.boot.slot_suffix
and answer must be _a
If not, you need change boot slot with command in fastboot mode:
Code:
fastboot set_active other
And now you can reboot in EDL mode and start to flash all needed partitions from unpacked archive Pseudo_ROW_J716Fl.7z
You need unpacked ZUI 12.6.211 from lolinet https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/ for working with QPST Partition Manager.
How it looks you can see in this video:
You must flash ALL partitions archive contains. Files in Add.rar not need, it for any case.
MANDATORY ! After flashing you need at first to boot in recovery and make reset to factory settings, it will format userdata. Without this action you can't boot.
Spoiler: IS
View attachment 5783891View attachment 5783993View attachment 5783995
Good Luck !
Click to expand...
Click to collapse
It was exactly what I was looking for and trying for days, but following your tutorial I still couldn't, it didn't turn on, I had to upload the rom 12.6.211 again. I wanted to leave it with multiple languages.
augustobfe said:
still couldn't, it didn't turn on
Click to expand...
Click to collapse
OK, I will re-check it in 2-3 days. Although I think you did something wrong.
f1tm0t said:
will re-check it in 2-3 days
Click to expand...
Click to collapse
Dude, I have some bad news for you. Your hands are crooked. That needs to be fixed.
My method works without fail. It only takes half an hour.
Try it again.
Spoiler: Look this:
Related
hello my oneplus 6 has been blocked on fastboot mode.:crying:
the problem is that I format the phone system with the twrp by mistake. now the phone is empty neither system nor twrp. I tried several methods like msmdownloadtool but the phone does not connect.
i tried to install the twrp with the command prompt when i put the command adb devices the list of phones attached remains empty.
please help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try too flash stockrom via fastboot, following this thread https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
Please read the instruction carefully.
elbachiri said:
hello my oneplus 6 has been blocked on fastboot mode.:crying:
the problem is that I format the phone system with the twrp by mistake. now the phone is empty neither system nor twrp. I tried several methods like msmdownloadtool but the phone does not connect.
i tried to install the twrp with the command prompt when i put the command adb devices the list of phones attached remains empty.
please help me
Click to expand...
Click to collapse
in fast boot mode, only fastboot commands work like "fastboot boot twrp.img" will boot you into twrp
MrSteelX said:
in fast boot mode, only fastboot commands work like "fastboot boot twrp.img" will boot you into twrp
Click to expand...
Click to collapse
When i try the commands fastboot boot twrp.img
The commands gives me failed:error
elbachiri said:
hello my oneplus 6 has been blocked on fastboot mode.:crying:
the problem is that I format the phone system with the twrp by mistake. now the phone is empty neither system nor twrp. I tried several methods like msmdownloadtool but the phone does not connect.
i tried to install the twrp with the command prompt when i put the command adb devices the list of phones attached remains empty.
please help me
Click to expand...
Click to collapse
how Is your phone recognized?
°Washy said:
how Is your phone recognized?
Click to expand...
Click to collapse
Recognized like android phone
despite the drivers are installed
ndp_singe said:
Try too flash stockrom via fastboot, following this thread https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
Please read the instruction carefully.
Click to expand...
Click to collapse
https://ibb.co/ctgDjft
extract the images.zip (on the same directory - not a sub directory i.e images\ ).
extract Others_flashall.zip.
Your directory will look like this:
then run flash-all-partitions.bat.
Warning: that will wipe all your data
thanks i put the .bat files in the official rom 9.0.2 Oxyegen.rar
after I install the rom with the program tool all in one.
now all its running well thanks for your help
Hello everyone, I have a big problem with my device, it happens that the system started to fail and after that it turned off, when I turned on it stayed in a bootloop and I can only access the fastboot, the question is that my device does not have the OEM and I never did any modifications so it doesn't have recovery either.
So far I have tried to install for fastboot the boot.img and system.img from the original firmware but I get the error "remote: not allowed in locked state" because the bootloader is locked
Any recommendation?
Reflash original Stock ROM by means of ADB Sideload method
jwoegerbauer said:
Reflash original Stock ROM by means of ADB Sideload method
Click to expand...
Click to collapse
but I can't use recovery and it doesn't have TWRP installed either.
The truth is that I am quite new to this subject but it would help me a lot if you guide me through that process.
In addition, the stock rom offered by ulefone is in .tar.gz format
Both Stock Recovery and TWRP aren't needed to perform an ADB Sideload: both mentioned recoveries internally simply make use of this method.
Code:
adb devices
adb reboot sideload
adb sideload <STOCK-ROM-ZIP-FILE>
You at any time can convert a tar.gz archive to a zip archive. GIYF ...
jwoegerbauer said:
Both Stock Recovery and TWRP aren't needed to perform an ADB Sideload: both mentioned recoveries internally simply make use of this method.
Code:
adb devices
adb reboot sideload
adb sideload <STOCK-ROM-ZIP-FILE>
You at any time can convert a tar.gz archive to a zip archive. GIYF ...
Click to expand...
Click to collapse
How about, I was trying to access with ADB, however when I put adb devices, the device does not appear, perhaps because I did not have the USB debugging before the bootloop, I was trying with different commands and nothing happens, but it does appear in the device manager. I'm sure I have the correct drivers because I tried another device with USB debugging enabled and it works fine.
Attached image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It should be obvious to you that ADB can't work as expected if USB debug option isn't got enabled on Android.
how can the bootloop be solved if only fastboot is available?
And the manufacturer flashing tool doesn't recognize the phone?
I cannot reflash the phone.
My phone battery went off I plugged the charger and it boots me to twrp even though I didn't wish to open it when I press to boot me to system I still end up in twrp window... I also get this noffication
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Au123456 said:
My phone battery went off I plugged the charger and it boots me to twrp even though I didn't wish to open it when I press to boot me to system I still end up in twrp window... I also get this noffication View attachment 5479285
Click to expand...
Click to collapse
Do you want to be able to modify your system partition(including rooting the device) at some point in the future? If so, check the box beside the "never show this screen during boot again" then just swipe the slider at the bottom to allow modifications in the future.
Or
If you do not plan to modify your system partition in any kind of way, tap the "keep read only" button.
This happened to me multiple times, for me it was an error with flashing Treble GSI from google, tho i fixed it by going in fastboot mode/bootloader and on my PC to flash boot, lk, lk2, recovery (official one) and then reboot my phone, but you will delete the TWRP Recovery just so you know.
_________________________________________________________________________________________________________________________
NOTE: I don't know if this will work for you and might brick your device if you don't use correct ROM files...
_________________________________________________________________________________________________________________________
Also if it then boots into Fastboot mode than you can try flashing all files (It will factory reset your phone)
You have to install adb and fastboot on your PC
Commands:
cd *the path to adb and fastboot*
fastboot devices
fastboot flash *what you wanna flash* *filename of the file that you wanna flash*
For Example if you wanna flash boot it will be like ( fastboot flash boot boot.img ) if the filename is with .bin wich most new devices use it will be fastboot flash boot boot.bin
Hope that this helps
Was trying to flash my CN ROM to the WW ROM.
Forgot to turn on USB Debugging in Developer Tools.
Couldn't get it work using HunterTik's guide.
Ran flashall_ATF from windows explorer.
Command prompt flashed on screen then vanished.
Tried running flashall_ATF in an elevated command prompt.
It failed but has apparently wiped the ROM. Device is now stuck in boot loop to fastboot.
Whatever option I choose reboots the device back to fastboot.
Windows can see the device but adb devices returns List of Devices Attached is blank.
How do I recover the phone from here?
Found this thread Rog phone 5 stucked on fastboot
Ran this command: fastboot -v flash all WW_ZS673KS_18.0830.2101.75_M2.13.24.14.1-ASUS_1.1.63_Phone-user.raw
Received these lines of text & now device boots to splash screen, gets stuck there, reboots a few times then sends me back to fastboot.
Still can't access recovery mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Device is now back in a fastboot loop with no access to any options but power off & restart.
Your phone is broken
Buy a new phone and don't try to mess with it next time
Flash back to CN and try again.
or, get a dump of the official firmware, then sent boot / recovery / super over fastboot manually.
[Windows] Asus OTA payload auto extractor
Since nobody is doing it, I thought I'd package it and just put it here to help people This is a packaged version of Vm03's payload dumper make to work with windows without installing python and other stuff I also included a single line script...
forum.xda-developers.com
also, you might want to try 9008 rescue. it seems like whatever you're trying to do wiped / repart the partitions. that's why the BL is confused.
also, if you're on win11, some driver related **** can mess things up causing flashing fail.
yurishouse said:
also, you might want to try 9008 rescue. it seems like whatever you're trying to do wiped / repart the partitions. that's why the BL is confused.
also, if you're on win11, some driver related **** can mess things up causing flashing fail.
Click to expand...
Click to collapse
9008 rescue is the direction I was headed & you're right. Although, on reflection, the partitions were already deleted prior to running the 'fastboot -v flash all xx.raw' command. Not sure how, since that command was the only thing I did which resulted in something happening.
I have a CUBOT Note 20 Pro (rooted) and today I tried to install the android 11 GSI when I got an error saying "FAILED (remote: 'This partition doesn't exist')" when trying to flash using the fastboot command line and this command specifically "fastboot flash system system.img". I looked around the scatter file and there seems to be no use of the system.img file whatsoever.
I have attached the scatter file and a screenshot of the error.
Any help would be highly appreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[TOOL][WIN,LIN,AND,DARW] Super image tools | extract or make partitions RW in super partition
Disclaimer: Super image tools was made for testing and educational purposes, ME is not responsible for what you do on/with your device using our tools, you must agree that you using our tools on your own risk, I am not responsible for anything...
forum.xda-developers.com
aIecxs said:
[TOOL][WIN,LIN,AND,DARW] Super image tools | extract or make partitions RW in super partition
Disclaimer: Super image tools was made for testing and educational purposes, ME is not responsible for what you do on/with your device using our tools, you must agree that you using our tools on your own risk, I am not responsible for anything...
forum.xda-developers.com
Click to expand...
Click to collapse
How exactly do I use this tool?
read back super.img from SP Flash Tool, patch it, replace system.img, whatever, and flash new super.img back from fastboot
aIecxs said:
read back super.img from SP Flash Tool, patch it, replace system.img, whatever, and flash new super.img back from fastboot
Click to expand...
Click to collapse
Can you explain the steps a bit more? I'm really new and have no clue how to do this.
sorry apparently TWRP is required, but you can also use official tools on PC
https://forum.xda-developers.com/showthread.php?t=4041843
https://forum.xda-developers.com/showthread.php?t=4196625
aIecxs said:
sorry apparently TWRP is required, but you can also use official tools on PC
https://forum.xda-developers.com/showthread.php?t=4041843
https://forum.xda-developers.com/showthread.php?t=4196625
Click to expand...
Click to collapse
So, lets review the steps:
1. Unpack the super.img using the links you provided
2. Modify the system.img inside the super
3. flash
another approach is DSU Loader from Developer Options
DSU Sideloader lets you easily boot any custom GSI via Android DSU Loader
DSU Sideloader is an open source app that greatly simplifies the custom GSI installation process of the Android DSU Loader. Check it out!
www.xda-developers.com
https://forum.xda-developers.com/t/cubot-note-20-pro.4383027