Hi there,
is there a good custom rom for the P11-Tablet-model Plus by Lenovo (TB-J616F)? LineageOS doesn't support only a few devices for Lenovo (and not this one) and unfortunately Elixr not a single device of Lenovo (yes, for the TB-J607F I've seen here this, but it seems not compatible).
In this respect, the question arises whether someone has already gained experience with an alternative version to the built-in-OS or whether there is such a thing at all for this model?
Thanks!
I've been looking for ROMs for a while for tb-j616f since Lenovo is terrible at updating, but found nothing so far.
Wonder if we can flash GSI. Does anyone have a tutorial to share?
danannnn said:
Je cherchais depuis un certain temps des ROM pour tb-j616f car Lenovo est terrible en matière de mise à jour, mais je n'ai rien trouvé jusqu'à présent.
Je me demande si nous pouvons flasher GSI. Quelqu'un at-il un tuto à partager ?
Click to expand...
Click to collapse
danannnn said:
I've been looking for ROMs for a while for tb-j616f since Lenovo is terrible at updating, but found nothing so far.
Wonder if we can flash GSI. Does anyone have a tutorial to share?
Click to expand...
Click to collapse
You can install Pixel 12.1 and 13
Bootloader wideline from L1 to L3
13didounet said:
You can install Pixel 12.1 and 13
Bootloader wideline from L1 to L3
Click to expand...
Click to collapse
You mean Pixel Experience ROM?
Can you recommend a specific guide/tutorial?
danannnn said:
You mean Pixel Experience ROM?
Can you recommend a specific guide/tutorial?
Click to expand...
Click to collapse
First of all you have to know how to flash the stock rom with flashtools to return to a factory configuration if there is a problem
13didounet said:
First of all you have to know how to flash the stock rom with flashtools to return to a factory configuration if there is a problem
Click to expand...
Click to collapse
Can you provide the guide for installing the custom ROM please? I'll familiarise myself with the aforementioned process first. I haven't been able to find any custom ROMs for the p11 plus elsewhere
To start you have to unlock
the bootloader
Unlock Bootloader on Lenovo P11/P11 Pro/P11 Plus Tablets
In this comprehensive tutorial, we will show you detailed steps to unlock the bootloader on Lenovo P11/P11 Pro/P11 Plus.
www.droidwin.com
13didounet said:
To start you have to unlock
the bootloader
Unlock Bootloader on Lenovo P11/P11 Pro/P11 Plus Tablets
In this comprehensive tutorial, we will show you detailed steps to unlock the bootloader on Lenovo P11/P11 Pro/P11 Plus.
www.droidwin.com
Click to expand...
Click to collapse
Thanks. Do you have a link to the custom ROM? Pixel experience doesn't list the p11 plus on its compatible device list.
There is no custom rom for the P11 plus
You can just install a GSI rom.
Pixel experience Android 13 works. You can try to go through the Dsu while keeping the original rom
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
You can just install a GSI rom.
Pixel experience Android 13 works. You can try to go through the Dsu while keeping the original rom
Click to expand...
Click to collapse
I tried to install a GSI and it didn't work in my device (TBJ616F - P11 Plus).
I was able to root the device, but when I wiped/reset and flashed the GSI, it got stuck in fastboot mode. I had to use SP Flash Tool to put the stock ROM back.
Now I'm curious about something (I'm a noob), is it possible to flash the Pixel Experience via SP Flash Tool? Are there other options to get this tablet running another OS?
Gsi that works for 616f
Pixel Experience Plus 12.1 and 13
Crdroid 12.1 security January
Arrows 12.1 13 security January
adb reboot bootloader
fastboot flashing unlock
fastboot flashing unlock_critical
fastboot --disable-verification flash boot boot.img
fastboot --disable-verification flash vbmeta vbmeta.img
fastboot -w
fastboot reboot fastboot
fastboot erase system
fastboot delete-logical-partition product_a
fastboot --disable-verity --disable-verification flash system "RomGsi.img"
fastboot -w
fastboot reboot bootloader
fastboot erase userdata
fastboot reboot
13didounet said:
Gsi that works for 616f
Click to expand...
Click to collapse
Are you sure? The tutorial I followed was made in the Qualcomm version, and mine is the Mediatek. This is relevant, isn't it?
lenovo P11 plus 616f mediatek
tuto works
Anyone actually tried this for realsies? I'd be greatful for a guide that can be followed slightly better than plonking down a list of commands. I know what I'm doing, but it's just that I probably need tools, links, and a bunch more details.
thany2 said:
Anyone actually tried this for realsies? I'd be greatful for a guide that can be followed slightly better than plonking down a list of commands. I know what I'm doing, but it's just that I probably need tools, links, and a bunch more details.
Click to expand...
Click to collapse
I managed to flash the Pixel Experience (Android 13, haven't tried others), but restored the tab to the stock ROM because the GSI was crashing a lot.
The best solution I got was rooting the stock version, removing the bloatware and installing a good launcher. I'll try a different GSI version later.
You can follow this process to flash your tab: https://magiskzip.com/how-to-install-android-13-on-any-project-treble-phones/
There's also this video (in portuguese):
13didounet said:
First of all you have to know how to flash the stock rom with flashtools to return to a factory configuration if there is a problem
Click to expand...
Click to collapse
Where would one get the factory image for this tablet? For my pixel I typically use "fastboot update" command, will that work here too?
Jacobh1245 said:
Where would one get the factory image for this tablet? For my pixel I typically use "fastboot update" command, will that work here too?
Click to expand...
Click to collapse
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
Whenever I try to earese system I get "Partition table does not exists" and when I try to flash Rom it says system Partition does not exist.
J'utilise Rom EvolutionX 7.6.1 Android 13 et root magisk et pas de problème
13didounet said:
J'utilise Rom EvolutionX 7.6.1 Android 13 et root magisk et pas de problème
Click to expand...
Click to collapse
Existe-t-il des instructions pour ces deux étapes de travail? Peut-être aussi en anglais pour le proposer à davantage de personnes?
Related
Hello I'm a newbie and I bought the P9 lite 2017 I tried to root the device but I got problems now the cellphon doesn't have OS I can boot in twrp ( I think it is the app) but I can not find a rom who works into my phone, so thats why I'm looking for some help with the experts
PRA-LX3C69B110 <-- this is the OS version that my phone has
I can not use the recovery because it has twrp and I can not try to recover my phone
hope someone can help me
It's not written anywhere so it could be confusing but this forum is for p9 lite 2016 version. So I think you shouldn't be using anything from here. Maybe the basics Huawei stock firmware reinstalling methods could help.
Informix23 said:
Hello I'm a newbie and I bought the P9 lite 2017 I tried to root the device but I got problems now the cellphon doesn't have OS I can boot in twrp ( I think it is the app) but I can not find a rom who works into my phone, so thats why I'm looking for some help with the experts
PRA-LX3C69B110 <-- this is the OS version that my phone has
I can not use the recovery because it has twrp and I can not try to recover my phone
hope someone can help me
Click to expand...
Click to collapse
Heyho,
based on this article u should look for an P8 Lite 2017 (depending where u bought it)
(Sry for the article language, its german but with translator it should be no prob)
...
The Huawei P9 Lite 2017 was presented during the CES and is a refreshed version of the previous P9 Lite. It comes on the European market as ... the Huawei P8 Lite 2017.
...
Click to expand...
Click to collapse
(Translated via G-Translator)
Regards,
Sebastian
Informix23 said:
Hello I'm a newbie and I bought the P9 lite 2017 I tried to root the device but I got problems now the cellphon doesn't have OS I can boot in twrp ( I think it is the app) but I can not find a rom who works into my phone, so thats why I'm looking for some help with the experts
PRA-LX3C69B110 <-- this is the OS version that my phone has
I can not use the recovery because it has twrp and I can not try to recover my phone
hope someone can help me
Click to expand...
Click to collapse
Which TWRP you have installed? Link?
Hello. If you have unlocked bootloader you should use this.
Download your firmware via Firmware Finder
Extract update.app (the bigger one if you have more than one file - 1.24gb is with pack with needed partitions) with https://forum.xda-developers.com/showthread.php?t=2433454
Extract SYSTEM.IMG, BOOT.IMG and RECOVERY.IMG open cmd.exe and flash it fastboot flash system system.img, ....
1)recovery
2)boot
3)system
Btw. No data lost.
I tried this.
---------- Post added at 11:07 AM ---------- Previous post was at 11:03 AM ----------
And if you are flashing anything read instructions and use brain. Brain is very important. If you have another model number than in thread its not for you. Pay attention.
pospi69 said:
Hello. If you have unlocked bootloader you should use this.
Download your firmware via Firmware Finder
Extract update.app (the bigger one if you have more than one file - 1.24gb is with pack with needed partitions) with https://forum.xda-developers.com/showthread.php?t=2433454
Extract SYSTEM.IMG, BOOT.IMG and RECOVERY.IMG open cmd.exe and flash it fastboot flash system system.img, ....
1)recovery
2)boot
3)system
Btw. No data lost.
I tried this.
---------- Post added at 11:07 AM ---------- Previous post was at 11:03 AM ----------
And if you are flashing anything read instructions and use brain. Brain is very important. If you have another model number than in thread its not for you. Pay attention.
Click to expand...
Click to collapse
thx you saved my phone :laugh:
Huawei P9 ERROR MODE PROBLEM SOLVED
I know how to solve it!
Whatsapp me: +50766442667
Twitter
Instagram
Gmail
Im working on a Tutorial
#22Snt said:
did you solve it? i know how!!
email me: [email protected]
Click to expand...
Click to collapse
tnx so much bro:good::good::good::good::good::good:
Didnt work for me...
Did someone has a Backup from a PRA-LX3 from Telcel Mexico?
I need to go back to Stock since i mess up with vendor partition or something and i dont have sound on any rom.
¿Porque no te funciono?
#22Snt said:
¿Porque no te funciono?
Click to expand...
Click to collapse
Baje el update.app de Huawei firmware finder
Extraje los boot, system y recovery y los mande por fastboot.
No inicia, as
ingcarranza88 said:
Baje el update.app de Huawei firmware finder
Extraje los boot, system y recovery y los mande por fastboot.
No inicia, as
Click to expand...
Click to collapse
Whatsapp +50766442667
#22Snt said:
Whatsapp +50766442667
Click to expand...
Click to collapse
Ya te agregue amigo
Le Pro3 AI version X650 EUI5.9_25S streamlined ROOT V4
1.31 GB
letv-x650-7to-twrp3.1-recovery-new
19.4 MB
Update log:
Based on the official 25S unpack optimization, the ROM main streamlined, suitable for like the original friend
Maintain the official input method and store and the necessary procedures
Repair official yellow box problem (mandfx & winter)
Streamline redundant programs and residual files
Modify the kernel to add init.d support
Change kernel selinux status to permissive
Built-in viper sound
Update the busybox component
Add ROOT Privilege Pro, perfect ROOT
Other features of their own experience.
Android version: 6.0.1
Updated on: 2017-05-02
Applicable models: Le Pro3 AI version X650
original link
1.) Copy ROM to your phone
2.) install the adb fastboot on the pc
3) Unlocking:
Go to Settings -> About -> Hit Build 7 times
Go to Settings -> Developer Options -> Enable OEM unlocking
Run 'adb reboot bootloader'
Use 'fastboot oem unlock'
4.) Install TWRP via fastboot
5.) Go in TWRP (WIPE - Dalvik/caсhe, Data, и Cache.)
6.) Installing the ROM
7.) The first boot and set your phone.
А русский язык в прошивке есть?
Когда появится Кастом?кто то знает?
vadanorsk said:
а русский язык в прошивке есть?
Click to expand...
Click to collapse
нет.
flixxxua1 said:
когда появится кастом?кто то знает?
Click to expand...
Click to collapse
в настоящее время ничего, кроме этого.
Who know, where whill been castom ROM to Leeco LEX650
Someone has an account here.
bbs.ydss.cn/forum.php?mod=vie...&pe=1&mobile=2
It seems like it's a new rom.
Its a fake or the author remove the link, anyways the post it's from few months ago
angelusx85 said:
Someone has an account here.
bbs.ydss.cn/forum.php?mod=vie...&pe=1&mobile=2
It seems like it's a new rom.
Click to expand...
Click to collapse
Maybe you give not bad link
sorry, I have set myself apart
can i apply this on my LeEco Pro 3 AI Edition LEX653?
LeEco Le Pro 3 AI (X650 ) - IMEI Lost
laikexpert said:
Le Pro3 AI version X650 EUI5.9_25S streamlined ROOT V4
1.31 GB
letv-x650-7to-twrp3.1-recovery-new
19.4 MB
Update log:
Based on the official 25S unpack optimization, the ROM main streamlined, suitable for like the original friend
Maintain the official input method and store and the necessary procedures
Repair official yellow box problem (mandfx & winter)
Streamline redundant programs and residual files
Modify the kernel to add init.d support
Change kernel selinux status to permissive
Built-in viper sound
Update the busybox component
Add ROOT Privilege Pro, perfect ROOT
Other features of their own experience.
Android version: 6.0.1
Updated on: 2017-05-02
Applicable models: Le Pro3 AI version X650
original link
Click to expand...
Click to collapse
Hello, I need some help.
I got a brand new X650 (4GB/64GB) two days ago and tried TWRP from laikexpert in fastboot mode (not flashed).
This was just to see if it is a suitable candidate for flash. TWRP loaded succesfully, but was completely in chinese and did not respond on touch. MTP with PC worked.
Only choice to get out of this was long press of power-button. Even I did not flash or did anything else, Phone got stucked in first leeco screen.
Stock Recovery was still ok. I tried to perform factory reset but it did not succeed.
Maybe I mistook something with stock recovery but when I checked back later with fastboot of TWRP 3.1 from laikexpert i could see at my PC that all files were gone from phone except an empty TWRP-Folder was there.
After this I tried other older TWRP (LePro3AI_TWRP_3.0.3_recovery) from other post which had standard user interface in english and responded almost normally. I did a backup from what was remained in the phone and copied it to my PC. Afterwards I flashed this TWRP 3.0.3.
Finally I decided to flash "Le Pro3 AI version X650 EUI5.9_25S streamlined ROOT V4" which succeded in booting system, but now I am without IMEI. Means my phone is perfectly rooted and has somehow custom-ROM, but without IMEI and therefore is useless.
Can somebody help me out ?
fastboot ok
TWRP (LePro3AI_TWRP_3.0.3_recovery)
TWRP backup with unknown status before I flashed new ROM
Le Pro3 AI version X650 EUI5.9_25S streamlined ROOT V4
no IMEI in phone, only hardcopy of IMEI-label from backside of phone
X650 4gb/64gb
123Bart said:
Hello, I need some help.
Click to expand...
Click to collapse
The zip-file from the linked thread below restored my phone. IMEI's are back. Phone is operational again but is now EUI 25S CN
(english language is available)
It is not exactly as before, because in fastboot it was named somehow "X650-oversea" before the mess.
Now it is changed to "whole netcom".
"Le Pro3 AI X650 EUI5.9_25S install ROM via Fastboot" the other link from laikexpert
https://forum.xda-developers.com/le...e-pro3-ai-x650-eui5-925s-install-rom-t3716920
123Bart said:
The zip-file from the linked thread below restored my phone. IMEI's are back. Phone is operational again but is now EUI 25S CN
(english language is available)
It is not exactly as before, because in fastboot it was named somehow "X650-oversea" before the mess.
Now it is changed to "whole netcom".
"Le Pro3 AI X650 EUI5.9_25S install ROM via Fastboot" the other link from laikexpert
https://forum.xda-developers.com/le...e-pro3-ai-x650-eui5-925s-install-rom-t3716920
Click to expand...
Click to collapse
If you can flash by fastboot, you can try to install twrp again and flash magisk for root, if something goes wrong, you can restore the phone again via fastboot.
Toni Moon said:
If you can flash by fastboot, you can try to install twrp again and flash magisk for root, if something goes wrong, you can restore the phone again via fastboot.
Click to expand...
Click to collapse
I tried already flash of TWRP succesfully afterwards of fastboot restore, but TWRP asks for password and could only be used in read only mode.
Phone has encrypted data partition after fastboot restore with "leecopro3 ai.zip ". I tried "default_password" and also method with setting PIN in restored phone and tried this PIN for TWRP, but without being successful in both cases.
I formatted data partition and reflashed "streamlined Root v4" again, but than again both IMEI are blank.
Would flash of "STOP_Orange+_state+S20.zip" and "no-verity-opt-encrypt.zip" help against blank IMEI in streamlined rom?
Any idea how to continue ?
X650
Toni Moon said:
If you can flash by fastboot, you can try to install twrp again and flash magisk for root, if something goes wrong, you can restore the phone again via fastboot.
Click to expand...
Click to collapse
Ok, I flashed again the LePro3AI_TWRP_3.0.3_recovery. Due to encrypted data partition I formatted data partition, rebooted into TWRP and put Magisk on the now available data partition.
Flash of Magisk was succesful, reboot also !
Only thing is, that english language was gone due to formatted partition, but meanwhile I know where to touch to come inside the menues.
Magisk was not there and no GSM and no IMEI was available.
Now I am back with leecopro3 ai.zip method.
you're doing something wrong, try this twrp, works fine for me:
https://mega.nz/#!tfJn2J7B!Ggtdd_pTFA1-JLUERllhpspFrE_NY9CR-f2zcfW_0dc
you must wipe all before flash
Toni Moon said:
you're doing something wrong, try this twrp, works fine for me:
https://mega.nz/#!tfJn2J7B!Ggtdd_pTFA1-JLUERllhpspFrE_NY9CR-f2zcfW_0dc
you must wipe all before flash
Click to expand...
Click to collapse
Thanks for your assistance
I flashed it but it is in chinese language which I can not read. In flashed condition screen touch works perfect.
Is it possible to change this TWRP to english ?
If so can you guide me to the menue to set to english?
123Bart said:
Thanks for your assistance
I flashed it but it is in chinese language which I can not read. In flashed condition screen touch works perfect.
Is it possible to change this TWRP to english ?
If so can you guide me to the menue to set to english?
Click to expand...
Click to collapse
youtube:
https://www.youtube.com/watch?v=vxPeYJYsUYU
Mira aquí:
Le Pro3 AI X650 EUI5.9_25S simplificado ROOT V4
P.S.
1.) Desbloquee el gestor de arranque
2.) Instale TWRP a través de fastboot
3.) Vaya a TWRP. Weip: WIPE - Dalvik / cace, Datos y Caché.
4.) Instale el firmware
5.) La primera descarga y configure el teléfono.
Toni Moon said:
youtube:
https://www.youtube.com/watch?v=vxPeYJYsUYU
Mira aquí:
Le Pro3 AI X650 EUI5.9_25S simplificado ROOT V4
P.S.
1.) Desbloquee el gestor de arranque
2.) Instale TWRP a través de fastboot
3.) Vaya a TWRP. Weip: WIPE - Dalvik / cace, Datos y Caché.
4.) Instale el firmware
5.) La primera descarga y configure el teléfono.
Click to expand...
Click to collapse
Your linked Youtube video is for classical TWRP which I know well, but please see my screenshot in my previous post. It has completely different user interface and look
You need to be in stock emui 8 with unlocked bootloader.
If you are in elemental rom come back to stock emui 8 then flash this rom.
If you are in another gsi you can proceed directly (flash below recovery then do factory reset then flash gsi los rom via fastboot then again reboot to stock recovery do factory reset)
If you are in stock emui 8 do not wipe anything just flash it via fastboot and do factory reset.
first flash this recovery
https://mega.nz/#!cbJFAIQD!qvp1KnZ0qxlg6nHDFmpM5qyZ9QUVIDe5PoZE0BQf8fs
Fastboot command: fastboot flash recovery_ramdisk name of recovery.img
Then download
https://openkirin.net/download/
Fastboot command: fastboot flash system name of image.img
Los or RR rom and flash via fastboot (no need to wipe anything) then reboot to recovery do factory reset. You will have oreo 8.1 with gapps ,full signal bars,face unlock and stock camera.
If you are experiencing no sound its not gsi problem you didn't flashed stock completely so first flash this twrp recovery (only if you are in oreo not for emui5)
https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
Then flash stock emui 8 via huru
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
If huru only flased update.zip and gave you error no update_full_hw.zip and no update_data_full_public.zip not found in sd card then you need to rename them and flash again without wiping anything.
If stock emui 8 taking more than 5 minutes to boot then flash stock recovery mentioned above and do factory reset then it will boot with in 5 minutes.
If you don't have network or imei then you need to root. Then use any root explorer then go to cust/cn/all/localprop and change the line ro_config full network support=ture to false then reboot your network and imei will come back. You can do this in stock or in gsi.
RR ROM has great battery life with tons of customizations.
For emui8 flashing instructions,root and sound mod follow these instructions
https://forum.xda-developers.com/ho...si-honor-6x-8-1-0-t3809004/page5#post76981105
For telegram support of openkirin join this group
https://t.me/joinchat/HUf8EBJUJZQD281E59MdDw
Hell yess, thanks to open kirin team and you for mentioning it, the rom is excellent in use all bugs (the ones i faced in other gsi) fixed in this one and the availability of stock camera is just a cherry on top ?
Im newbie not familiar with this term
what is "gsi"?
need help
How to install emui 8 on bln-l21c432
jlan007 said:
Im newbie not familiar with this term
what is "gsi"?
need help
Click to expand...
Click to collapse
Generic system image. Read about project treble.
jlan007 said:
Im newbie not familiar with this term
what is "gsi"?
need help
Click to expand...
Click to collapse
Gsi means generic system image. In oreo custom roms will be available in system image formate we don't need twrp to flash custom roms just flash it via fastboot and factory reset.
Gsi roms will give you latest android os updates same as pixel devices getting so we don't need to wait for hauwei to release updates. If android p releases these gsi roms will give u update same as google devices getting. Oreo is game changer for every device.
If u want to flash gsi rom follow the emui8 upgrade method
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Then follow instructions on openkirin support section.
--ahmed said:
How to install emui 8 on bln-l21c432
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Follow that guide you will be on oreo in 10mins or less
If we rebrand to Chinese then update to Oreo and flash gsi..can we rebrand to our original variant or is there need to?
Which gsi redirection rom , carbon rom or los 15 ???
johnscrub said:
If we rebrand to Chinese then update to Oreo and flash gsi..can we rebrand to our original variant or is there need to?
Click to expand...
Click to collapse
Yes we can rebrand to original variant using hwota8
Khan ubaid said:
Which gsi redirection rom , carbon rom or los 15 ???
Click to expand...
Click to collapse
Go for Los 15 which is more stable and updated one.
Resurrection remix has huawei stock camera inbuilt....
Why flash stock recovery ? For those who are on Twrp ?
Great post. Hope you share some more experiences.
Trying to use the Google Play store it's telling me that my device isn't certified and I can't do anything..
NVM: For anyone else wondering I installed Magisk then the Magiskhide module and changed fingerprint.
Khan ubaid said:
Resurrection remix has huawei stock camera inbuilt....
Click to expand...
Click to collapse
Los is also had hauwei stock camera but rr in initial buid and los got 4 updates.
Nollie8969 said:
Why flash stock recovery ? For those who are on Twrp ?
Great post. Hope you share some more experiences.
Click to expand...
Click to collapse
Because you can't perform factory reset from twrp it can't do it correctly finally you will ended up in bootloop. You can flashctwrp right after doing factory reset but openkirin doesn't support twrp.
whateven12 said:
Trying to use the Google Play store it's telling me that my device isn't certified and I can't do anything..
NVM: For anyone else wondering I installed Magisk then the Magiskhide module and changed fingerprint.
Click to expand...
Click to collapse
So before flashing magdisk did playstore worked for you? Or did you flashed magdisk when flashing os? For me playstore works perfectly.
Ramesh006 said:
So before flashing magdisk did playstore worked for you? Or did you flashed magdisk when flashing os? For me playstore works perfectly.
Click to expand...
Click to collapse
Play store or any Google app wouldn't work for me before I install Magisk and the Module to change the fingerprint to a certified device.
No solution, but in the meantime you can use Aptoide as store: http://en.aptoide.com
whateven12 said:
Play store or any Google app wouldn't work for me before I install Magisk and the Module to change the fingerprint to a certified device.
Click to expand...
Click to collapse
Did you flashed los or rr? Try reflash.
.
You can try to find the leaked unofficial 3.5.0 twrp build somewhere. And check the twrp telegram group.
LAST_krypton said:
Puede intentar encontrar la compilación twrp 3.5.0 no oficial filtrada en algún lugar. Y compruebe el grupo de telegramas twrp. Q version
Click to expand...
Click to collapse
You use the A125M and what twrp did you use to use the gsi rom?
I don't use the A125M, I use the A125F. But you can still try to find the unofficial twrp build for the A125M.
I joined the Telegram group, I hope to find help: ')
LAST_krypton said:
I don't use the A125M, I use the A125F. But you can still try to find the unofficial twrp build for the A125M.
Click to expand...
Click to collapse
u need to flash after ur flash twrp
vbmetacheck this link : https://forum.xda-developers.com/t/aosp-11-unofficial-samsung-sm-a125f-twrp.4317131/post-85548663
cyb3rx7 said:
u need to flash after ur flash twrp
vbmetacheck this link : https://forum.xda-developers.com/t/aosp-11-unofficial-samsung-sm-a125f-twrp.4317131/post-85548663
Click to expand...
Click to collapse
it is better to flash vbmeta first (to disable dm-verify) and then flash twrp image
So I flash first vbmeta and then twrp, but the error I had was that it stayed on the Samsung logo and on infinite reboots
After flashing twrp and the vbmeta you want to boot in to twrp and allow system modifications then you have to either flash a custom rom or flash a custom kernel so you can use the stock rom. Or you can just pre root your phone and then install twrp without the vbmeta, and you will be able to boot to the stock rom without a custom kernel.
Elholas said:
.
Click to expand...
Click to collapse
UPDATE: Found this, try asking here https://forum.xda-developers.com/t/i-will-build-twrp-for-your-device.4270211/
BryanCp13 said:
Entrei no grupo do Telegram, espero encontrar ajuda :')
Click to expand...
Click to collapse
BryanCp13 said:
I joined the Telegram group, I hope to find help: ')
Click to expand...
Click to collapse
hello, I have an a125m and I want to know if the gsi works on this model and which twrp you are using on it, if possible I would like its link, and if you hear a telegram group for this model please pass it on to me
¿Cómo rootear el oxígeno IN2017_11_C.42? Android 12
Unlock bootloader. Get the boot. img. Patch it with the Magisk application. Flash it in fastboot.
Same problem here
Xryphon said:
Unlock bootloader. Get the boot. img. Patch it with the Magisk application. Flash it in fastboot.
Click to expand...
Click to collapse
I'm struggling to find that boot image. Could you help me with that?
Does anyone have a patched boot.img of the build in the thread's subject line? I've accidentally soft bricked my OP 8 5G T-Mo by flashing the wrong image.
mutiny said:
Does anyone have a patched boot.img of the build in the thread's subject line? I've accidentally soft bricked my OP 8 5G T-Mo by flashing the wrong image.
Click to expand...
Click to collapse
I am looking for this as well