Does anyone has installed MoreLocale 2?
I want to check how the Right To Left language with "Force RTL layout direction" enabled looks like before paying 1500$ for this phone
Thanks!
Anyone?
I have more locale installed and it works well. I use it to switch to French.
tontondavid said:
I have more locale installed and it works well. I use it to switch to French.
Click to expand...
Click to collapse
Hi
Thanks a lot for your reply! Much appreciate it if you can choose the Hebrew language + enable "Force RTL layout direction" and upload screenshot? It will be very helpful!
tontondavid said:
I have more locale installed and it works well. I use it to switch to French.
Click to expand...
Click to collapse
Hi
Just tried to change the language and it works, but after doing a reboot it's being inverted...
My device is not rooted. Any advice?
Yes that's normal. You have to apply the changes everytime your reboot.
Related
I've created a software to activate my french external keyboard after flashing a rom (for example).
It works well with WizFlo and CR86 for me.
I've haded many countries listed here :
http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
I can had other coutries, if you need them...
I would appreciated your feedback.
flap said:
I've created a software to activate my french external keyboard after flashing a rom (for example).
It works well with WizFlo and CR86 for me.
I've haded many countries listed here :
http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
I can had other coutries, if you need them...
I would appreciated your feedback.
Click to expand...
Click to collapse
i dont understand i never need software to run my keybord on my wiz
mrchezzy said:
i dont understand i never need software to run my keybord on my wiz
Click to expand...
Click to collapse
The whole set of rom produced here is for QWERTY keyboard. A french keyboard is AZERTY and so when you tap A on the keyboard a Q is printed on the screen.
This soft enable the localised keyboard....
could u creat one for me for german keyboard
flap said:
I've created a software to activate my french external keyboard after flashing a rom (for example).
It works well with WizFlo and CR86 for me.
I've haded many countries listed here :
http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
I can had other coutries, if you need them...
I would appreciated your feedback.
Click to expand...
Click to collapse
i need one for my qtek 9100 for german keystroke after installing CR86 in englisch in may system.would be very happy.
Eugene
maceugene said:
i need one for my qtek 9100 for german keystroke after installing CR86 in englisch in may system.would be very happy.
Eugene
Click to expand...
Click to collapse
I've ever included many european language and german is inside...
Could you tell me if it's ok for you, please?
flap said:
I've created a software to activate my french external keyboard after flashing a rom (for example).
It works well with WizFlo and CR86 for me.
I've haded many countries listed here :
http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
I can had other coutries, if you need them...
I would appreciated your feedback.
Click to expand...
Click to collapse
dude i want HINDI one
pls make a cab for it
btw thanks for it
@flap
Many thanks and merci beaucoup for the CAB.
It doesn't seem to work for me on the CR86 Touch HD 0.5 ROM.
I'm trying to set it to UK English - 0809 but it stays on 0409.
dhawal4u said:
dude i want HINDI one
pls make a cab for it
btw thanks for it
Click to expand...
Click to collapse
WizKB v0.3 :
Hindi is integrated...
Tell me if it's ok, please.
Regards.
Hi bigstoo,
At first, thank you for your french ;-)
bigstoo said:
@flap
Many thanks and merci beaucoup for the CAB.
It doesn't seem to work for me on the CR86 Touch HD 0.5 ROM.
I'm trying to set it to UK English - 0809 but it stays on 0409.
Click to expand...
Click to collapse
I suppose that you didn't soft reset the phone... I've tried it and if you reset you phone by pressing the reset button with yout stylus, your previous languague keyboard is kept.
You must reset your phone by pressing 5 seconds the power button on top of the phone and tap "reset" and the new value is ok at reboot.
At least, it's working like that on my wizard/CR86 ;-)
Tell me if it's ok, please.
Have a nice day.
flap said:
The whole set of rom produced here is for QWERTY keyboard. A french keyboard is AZERTY and so when you tap A on the keyboard a Q is printed on the screen.
This soft enable the localised keyboard....
Click to expand...
Click to collapse
o ok i did not know that see u learn every day
sounds good, is there hebrew ?!?!?
mohen said:
sounds good, is there hebrew ?!?!?
Click to expand...
Click to collapse
WizKB v0.4
- Added Hebrew
- Added optional automatic soft reset to save new settings
flap said:
I suppose that you didn't soft reset the phone... I've tried it and if you reset you phone by pressing the reset button with yout stylus, your previous languague keyboard is kept.
You must reset your phone by pressing 5 seconds the power button on top of the phone and tap "reset" and the new value is ok at reboot.
Click to expand...
Click to collapse
WOW! I guess you learn something every day. I though that pressing the reset button with the stylus WAS a soft reset. I didn't know that pressing the power button for 5 secs did anything.
I winder if that's where I've been going wrong with other registry settings.
flap said:
I've ever included many european language and german is inside...
Could you tell me if it's ok for you, please?
Click to expand...
Click to collapse
it is not working,i have installed the cab in my system.how and what do i do from there on.i went to keyboard layout and changed it to 0407 from 0409 but nothing happened after softreset.
maceugene said:
it is not working,i have installed the cab in my system.how and what do i do from there on.i went to keyboard layout and changed it to 0407 from 0409 but nothing happened after softreset.
Click to expand...
Click to collapse
After "running" the .cab, the soft is installed in \program files\WizKB
Open file explorer, go into that folder on your wizard and run WizKB.exe. Select you external keyboard in the combobox, tap Ok and accept the soft reset...
That should work.
THANK U
flap said:
After "running" the .cab, the soft is installed in \program files\WizKB
Open file explorer, go into that folder on your wizard and run WizKB.exe. Select you external keyboard in the combobox, tap Ok and accept the soft reset...
That should work.
Click to expand...
Click to collapse
THANKS VERY MUCH IT DID HELP.
maceugene said:
THANKS VERY MUCH IT DID HELP.
Click to expand...
Click to collapse
you're welcome
and thank you for your feedback...
no dude hindi not working
only seeing lots of squares
try if u can correct it
'btw thanks for it
This tool should be stickied...
can you add arabic please
My touch viva keyboards are not showing word suggestion in ABC mode. What could be wrong? I even installed spb keyboard, that is also not showing word suggestion. I ticked all options in settings of input but still in vain.
Any help will be highly appreciated.
Perhaps you "Cleared stored entries". Are you using an English language Rom?
Jadel said:
Perhaps you "Cleared stored entries". Are you using an English language Rom?
Click to expand...
Click to collapse
Thanks Jadel.
Yes I am using english Rom. If I have cleared stored entries, then what is the solution?
Any help will be highly appreciated.
this is gingerbread keyboard with Russian,Ukrainian, English, Hebrew,German,French,Spanish, Italian included.i used it on many phones before without any problems. just installed on new galaxy s 4g and it not appears nowhere but only in settings.
any ideas how replace samsung keyboard to this?
Can you share the list of supporting languages. Share here or PM me thanks.
Russian,Ukrainian, English, Hebrew,German,French,Spanish,Italian
found a way to use it just missed simple click!
tonyio said:
this is gingerbread keyboard with Russian,Ukrainian, English, Hebrew,German,French,Spanish, Italian included.i used it on many phones before without any problems. just installed on new galaxy s 4g and it not appears nowhere but only in settings.
any ideas how replace samsung keyboard to this?
Click to expand...
Click to collapse
Thanks for the app I just don't see Spanish on the list... anyway to update the languages?
Thanks
Sent from my SGH-T959V using XDA App
no spanish.....sorry i just copied language list from somewhere else, i use only english, russian and hebrew.... don't know if any languages updates available.
tonyio said:
no spanish.....sorry i just copied language list from somewhere else, i use only english, russian and hebrew.... don't know if any languages updates available.
Click to expand...
Click to collapse
OK cool no problem ... this is still a.way better keyboard than the stock one again thanks for the app
Sent from my SGH-T959V using XDA App
tonyio said:
Russian,Ukrainian, English, Hebrew,German,French,Spanish,Italian
found a way to use it just missed simple click!
Click to expand...
Click to collapse
Hi mate can i ask you wich click was u missing?
I upgraded my girlfriend's Galaxy S to the last firmware - PDA:JP5 / PHONE:JP2 / CSC:JP5 (HUI) - with Kies... before update (Android 2.1) in keyboard language list She could choose many languages including Russian, now with this version the russian is disappeared and i can't get it back...
Thank you
settings-> locale and text -> input method -> GingerKeyboard
that's what i was missing
I'm not able to use Voice Input for my locale in XXKPQ. Is there way to enable it or which files should I backup for using it on XXKPQ from my original stock rom? Is it possible to add extra languages?
Any help will be greatly appreciated.
kamilien said:
I'm not able to use Voice Input for my locale in XXKPQ. Is there way to enable it or which files should I backup for using it on XXKPQ from my original stock rom? Is it possible to add extra languages?
Any help will be greatly appreciated.
Click to expand...
Click to collapse
I'm assuming you want Turkish voice recognition.
Go to Settings > Voice Input and Output > Voice Recognition Settings > Language > Turkish.
arindammanidas said:
I'm assuming you want Turkish voice recognition.
Go to Settings > Voice Input and Output > Voice Recognition Settings > Language > Turkish.
Click to expand...
Click to collapse
I've already tried. that doesn't work. I guess every rom has it's own recognition sources with some other main languages like English and French. So I think there isn't a source for Turkish in KPQ.
kamilien said:
I tried that the KPQ released. That doesn't work. I guess every rom has own recognition sources with some other main languages like English and French. So I think there isn't a source for Turkish in KPQ.
Click to expand...
Click to collapse
But I can see the Turkish option since I am also on XXKPQ. Maybe you need to flash a different ROM for your country.
Sent from my GT-I9003 using XDA
arindammanidas said:
But I can see the Turkish option since I am also on XXKPQ. Maybe you need to flash a different ROM for your country.
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
I think I don't make myself clear. There is Turkish option but there isn't a voice input on keyboard for Turkish. When you select Turkish, microphone disappears from keyboard.
I'm using KPQ because much of the roms, mods, themes etc. are compatible with KPQ.
Try these apps from market and check whether it solves ur problem...
1) Morelocale2
2) set locale and language.
Cheers
kamilien said:
I think I don't make myself clear. There is Turkish option but there isn't a voice input on keyboard for Turkish. When you select Turkish, microphone disappears from keyboard.
I'm using KPQ because much of the roms, mods, themes etc. are compatible with KPQ.
Click to expand...
Click to collapse
Okay I get your problem. Go to voice recognition settings and change to Turkish but in the keyboard language settings set it to english. Now try the mic button. It will recognise your voice in Turkish
Sent from my GT-I9003 using XDA
arindammanidas said:
Okay I get your problem. Go to voice recognition settings and change to Turkish but in the keyboard language set it to english. Now try the mic button. It will recognise in your voice in Turkish
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
That would be interesting. I have just installed Turkish stock rom. I will let you know as soon as I return to kpq again. Anyway, thanks for your effort mate.
Greetings,
I've just falshed the JB in my TF101, everything went fine unless the physical keyboard language input, before i was using Ctrl + Shift to change the language but now it's not working.
sorry for my bad english i wish you got what i need.
Go to settings>language and input and the change it there.
droyd4life said:
Go to settings>language and input and the change it there.
Click to expand...
Click to collapse
I did it but when I try to change the language it does not work..
Keyboard not working as well
wassim79 said:
I did it but when I try to change the language it does not work..
Click to expand...
Click to collapse
I too have flashed several roms from ICS to JB with no luck with keyboard dock support. I have actually bought 2 docks for the TF101 and neither will work on my rooted transformer with cyna 10..... HELP!!! please
any help please? i don't want to go back to ICS please. is there any possible solution?