I have thermal camera (Hti-Xintai HT-201) it's connecting to phone's usb. When I connect it to my Note20U nothing happens, devise isn't starting. Flash drive works fine though.
But it works on my old Samsung S8. Moreover if I connect it to S8 and then quickly reconnect to Note20U it's works fine there, untill I disconnect it for some time
Same trick works if I connect thermal camera to power bank and then to Note20U.
Is it possible to configure OTG to provide power for longer so device can initialize?
Related
https://www.box.com/s/1e4ee35d587f168cfbfd
https://www.box.com/s/7d0164dcbc096163402e
Anyone?
Also would HTC Desire charger work with it? (the sticks looks same - microUSB, but looks like the phone is not charging)
Also if the phone is dead, is there any way i can check if the battery/screen or whatever else is faulty?
When i connect it under Windows with USB cable, it says that the device cannot be recognized and the drivers cannot be installed.
When connected with USB, i did hold the power button to turn it on but it doesnt start and the phone keeps vibrating continuusly.
Look on the back, or inside, even under battery, for more information.
I already know it's Samsung Galaxy Mini II, homever i have issues turning it on.
All microusb chargers are the same except for amperage. Try all you have. This phone is probably terminally damaged, but try a new battery if possible.
It's really strange (the phone was little wet) homever, sometimes it's starting just fine and sometimes wont turn on at all.
I have removed battery and put it to the bowl with a rice for a night and will see if that helps.
My "dampness" recovery is to disassemble and put phone/tab/laptop in in very low oven ie 125-135 degrees F for several hours. You may have ti turn oven on & off manually to get that low temperature. Your mileage may vary.
OK so basically the phone is in following state:
It's charging fine, homever the biggest problem atm is i cannot get the usb mass storage to work.
I'm connecting it to the PC and the phone is detecting it as AC charger not USB - PC is not even trying to install any drivers.
PC is not detecting the phone at all (phone is detecting that its being connected, the button backlights are lighting up)
I got no dropdown in the phone to select charging, mass storage etc. (when i do it in settings/communication/usb settings it keeps saying to connect the usb cable, but the phone is charging so its connected just fine)
When i was connecting it for the first time windows tried to install drivers but failed, also it was constantly disconnecting the phone from usb cable (now its fine it seems)
When i connect it using "Kies Air" it's working homever i still dont see the SD Card in "My Computer" for example.
What a mess, anyway any idea how to get the USB working again?
Try different cable, and/or different PC.
I ordered new usb cable, homever i doubt it's the problem as the phone is recognizing connection and also it's charging fine.
Hello.
Short story: my phone was a little wet and i have some issues with it, mostly i want to get a mass storage to get working. (cant root)
Basically at first the phone didn't even want to charge, when i connected it to the PC windows was giving me an error that the device cannot be recognized, and couldn't install the drivers. (i had Kies installed)
I dried it completely, now the phone turns on without any problem, when i connect it to the pc the phone is recognizing connection (i hear sound + the button backlights are firing up for a sec)
Homever, windows is not detecting any USB device at all, and in about phone/info it says the phone is connected to the AC instead of USB.
When i connect it with USB there is no dropdown in notification to choose from charging, storage etc.
There is also manual usb storage mounting under settings/communication/usb settings , when i'm trying to mount here it just says to connect the phone with usb cable (not detecting connection, homever the backlight + sound is here after connecting, and it's charging)
I tried connecting it with usb debugging on/off even tried to fiddle with in service menu (*#7284#) but nothing.
And since i cannot get the usb storage working basically i cannot flash anything or root it.
Also the USB cable is not a Samsung but an HTC one, could this be a problem? (people in different thread said those cables are the same so it shouldnt be a problem, same amperage, same stick etc.)
Even tried to install MountUSB Widget from market, but it doesn't work when im trying to start the app it's force closing, when i make widget on desktop and press it the phone just vibrate for 1 sec and nothing happens.
When i connect phone with Kies AIR and it works, i mean it shows the storage information, also recognize the phone model correctly, how much free space i have on internal and on SD card but i cannot click "show in explorer" it's greyed out.
Any experts out there could help me? :crying:
Just a blind guess, try a USB cable which supports your device. If it doesn't help, I'm afraid it's a hardware problem and you will have to consult some hardware expert.
Ok
So I've had my Galaxy tab OTG for about a month now and was great until just a little while ago.
It always worked before but now anything connected to it doesn't work.
When I plug the otg in my device it recognizes that the otg is connected but the usb devices connected to it don't work at all.
For example, I connect a mouse to it and the pointer doesn't come up as well as the mouse light isn't even on.
Please help me, I really need a solution I use this otg for usb for school and also to connect xbox controllers.
Thanks if u can help
Sometimes i have the same problem, first clean your OTG with alcohol and toothbrush and your note 10.1 port when it is turned off.
If the problem persist just take it easy and just take out your OTG and reconnect it, try not to connect the OTG with a device attach to it, detach any devices of the OTG and then the OTG from the tablet, wait a few seconds and connect the OTG again and then wait a few seconds more until the Note recognize the OTG and connect the device to the OTG.
Its get a little tricky sometimes just be patient.
My Galaxy S6 keeps connecting and disconnecting from my PC(Win 10) within a second. Its quicker than Dhoni's stumping !
I have tried to use different cables, a brand new one, a fast charging cable and also an old school regular microUSB cable. Nothing worked!
I have disabled "USB selective suspend setting" on both battery and while charged. Still it doesnt work ! I am frustated. Please help!
i have the same problem
My s6 connects fine on my windows 10 pc and laptop. Have you tried connecting your phone to another pc/laptop? If it works on another machine then the issue is with your pc. Make sure you have latest Samsung mobile drivers installed and see if that makes a difference
There are two drivers using the car:
when they drive alone, they should connect to the bluetooth device
when they drive together, the phone of the primary driver should connect to the bluetooth device
I was thinking of something for the secondary driver that will either:
prompt before connecting to the specific bluetooth device
wait a few seconds before connecting
which will give the primary chance to connect