Related
Hi,
I recently got a brand new s6 G920A AT&T version from an authorized reseller. To my surprise the firmware on it is very old - 5.0.2 with sw version G920AUCU1AOCE
I have heard that this firmware was a pre-release/developer/engineering version of s6 and has unlocked bootloader. Is that true?
How do I find if the bootloader is locked or unlocked in my samsung s6 or for that matter in *any Samsung* phone? Is it possible to check using Odin or some other tool on whether the bootloader is unlocked?
Please let me know your thoughts or ideas! If the above is true, I could perhaps extract the unlocked bootloader and share it with everybody else!!
Thanks!
Alright Interesting...
Use ADB:
=========================================
1. Make to go to about device and tap build number 7 times.
2. Go to developer options (Above About Device)
3. Check usb debugging and oem (Just in case)
4. Connect your phone to your computer via usb cable (Of Course)
5. Download ADB Fastboot if you haven't already =====> https://forum.xda-developers.com/showthread.php?t=2317790
6. Install it and after that it should be set-up
6. Type the command fastboot devices
7. Then type fastboot oem device-info (BTW I am sorry for letting you know now but i think you might need to be in downloading mode or something to use the commands)
8. It should tell you if it is unlocked or not
==============================================
Method 2:
1. Boot up the phone normally then open the phone application and go to the dialer
2. *#*#7378423#*#*
3. Then service info --> configuration
4. Then it should say one of the following:
---------------------------------------------------------------------------------------------------------------------------------
1. Bootloader unlock allowed --Yes >> This means that your Bootloader is Locked
2. Bootloader Unlocked - Yes >> This means that your Bootloader is unlocked
I hope i was helpful to you, if not then i'm sorry to have wasted your time.
Thanks @ROOT67! Let me try both options out and get back on this thread.
ROOT67 said:
Use ADB:
=========================================
1. Make to go to about device and tap build number 7 times.
2. Go to developer options (Above About Device)
3. Check usb debugging and oem (Just in case)
4. Connect your phone to your computer via usb cable (Of Course)
5. Download ADB Fastboot if you haven't already =====> https://forum.xda-developers.com/showthread.php?t=2317790
6. Install it and after that it should be set-up
6. Type the command fastboot devices
7. Then type fastboot oem device-info (BTW I am sorry for letting you know now but i think you might need to be in downloading mode or something to use the commands)
8. It should tell you if it is unlocked or not
==============================================
Method 2:
1. Boot up the phone normally then open the phone application and go to the dialer
2. *#*#7378423#*#*
3. Then service info --> configuration
4. Then it should say one of the following:
---------------------------------------------------------------------------------------------------------------------------------
1. Bootloader unlock allowed --Yes >> This means that your Bootloader is Locked
2. Bootloader Unlocked - Yes >> This means that your Bootloader is unlocked
I hope i was helpful to you, if not then i'm sorry to have wasted your time.
Click to expand...
Click to collapse
Both the methods did not work! Please see for details below.
ROOT67 said:
Use ADB:
=========================================
1. Make to go to about device and tap build number 7 times.
2. Go to developer options (Above About Device)
3. Check usb debugging and oem (Just in case)
4. Connect your phone to your computer via usb cable (Of Course)
5. Download ADB Fastboot if you haven't already =====> https://forum.xda-developers.com/showthread.php?t=2317790
6. Install it and after that it should be set-up
6. Type the command fastboot devices
7. Then type fastboot oem device-info (BTW I am sorry for letting you know now but i think you might need to be in downloading mode or something to use the commands)
8. It should tell you if it is unlocked or not
==============================================
Click to expand...
Click to collapse
I could not put it in fastboot mode. Do we know if the Samsung s6 supports fastboot mode? If so, how to put it in fastboot mode?
Also as a side note, in developer mode under settings, I could find check box for USB debugging but not for OEM. There was another post which said that OEM checkbox was added under developer options only after bootloader lock was introduced in 5.1.1 firmware. Not sure if this is true.
Method 2:
1. Boot up the phone normally then open the phone application and go to the dialer
2. *#*#7378423#*#*
3. Then service info --> configuration
4. Then it should say one of the following:
---------------------------------------------------------------------------------------------------------------------------------
1. Bootloader unlock allowed --Yes >> This means that your Bootloader is Locked
2. Bootloader Unlocked - Yes >> This means that your Bootloader is unlocked
Click to expand...
Click to collapse
When I dial this number, nothing happened. Is there a different number for Samsung s6?
It's not a pre-release/developer/engineering firmware. It's just a really old firmware which released for public officially.
jilebi said:
Both the methods did not work! Please see for details below.
I could not put it in fastboot mode. Do we know if the Samsung s6 supports fastboot mode? If so, how to put it in fastboot mode?
Also as a side note, in developer mode under settings, I could find check box for USB debugging but not for OEM. There was another post which said that OEM checkbox was added under developer options only after bootloader lock was introduced in 5.1.1 firmware. Not sure if this is true.
When I dial this number, nothing happened. Is there a different number for Samsung s6?
Click to expand...
Click to collapse
No other number is available that i know of, like the person above stated it is a old firmware version and with that said i would highly try to prevent any updates from installing. I would love to help you out, but since i have no idea as to what would be needed to tell if the bootloader is unlocked, but i do know since Samsung is against us rooting and using our devices the way we want, it is safe to assume the bootloader is locked and because you have at&t variant. Your best bet to get your device bootloader information is to look around on the XDA forums.
Do you have any details on whether the bootloader was locked or unlocked for this old version? How can one test or check if bootloader is locked?
forumber2 said:
It's not a pre-release/developer/engineering firmware. It's just a really old firmware which released for public officially.
Click to expand...
Click to collapse
jilebi said:
Do you have any details on whether the bootloader was locked or unlocked for this old version? How can one test or check if bootloader is locked?
Click to expand...
Click to collapse
All AT&T branded nearly-new (including S6) Samsung devices has a non-unlockable locked bootloader.
There's no way to test that.
here are a couple of test scenario that i can think of. let me know your thoughts on them
- if the device is rooted, load a custom recovery like TWRP. next, try to boot into custom recovery. if it boots into custom recovery, bootloader is unlocked. if not, try to restore factory recovery using odin.
- if the device is rooted, load a custom ROM. next, try to boot into custom ROM. if it boots into custom ROM, bootloader is unlocked. if not, try to restore factory ROM using odin.
Will these test scenarios work? If not, what are the potential issues you see?
forumber2 said:
All AT&T branded nearly-new (including S6) Samsung devices has a non-unlockable locked bootloader.
There's no way to test that.
Click to expand...
Click to collapse
jilebi said:
here are a couple of test scenario that i can think of. let me know your thoughts on them
- if the device is rooted, load a custom recovery like TWRP. next, try to boot into custom recovery. if it boots into custom recovery, bootloader is unlocked. if not, try to restore factory recovery using odin.
- if the device is rooted, load a custom ROM. next, try to boot into custom ROM. if it boots into custom ROM, bootloader is unlocked. if not, try to restore factory ROM using odin.
Will these test scenarios work? If not, what are the potential issues you see?
Click to expand...
Click to collapse
- There's no custom recovery or custom kernel for SM-G920A, because of the reason I've wrote above.
- Installing a custom ROM doesn't require an unlocked bootloader unless the ROM doesn't require custom kernel. (Custom ROMs for SM-G920A don't require custom kernel (except leaked engineering/debugging kernel from Samsung for disabling dm-verity))
forumber2 said:
- There's no custom recovery or custom kernel for SM-G920A, because of the reason I've wrote above.
- Installing a custom ROM doesn't require an unlocked bootloader unless the ROM doesn't require custom kernel. (Custom ROMs for SM-G920A don't require custom kernel (except leaked engineering/debugging kernel from Samsung for disabling dm-verity))
Click to expand...
Click to collapse
Got it. Thanks. That makes sense.
Here is another option. For making custom recovery, my understanding is that partition info is needed. If the device is rooted e.g. using Pingpong (which works for this Android version), then one can get a partition info and compile TWRP for G920A. If so, can one try to install custom recovery like TWRP and verify if bootloader is locked? It feels to me that this may work. Do you see any flaws?
One possible flaw is that if bootloader is locked, it will prevent recovery from loading. So the phone will be without a working recovery. In that case, can factory recovery be re-installed using Odin?
Also, will any of the above steps trigger the KNOX flag?
jilebi said:
Got it. Thanks. That makes sense.
Here is another option. For making custom recovery, my understanding is that partition info is needed. If the device is rooted e.g. using Pingpong (which works for this Android version), then one can get a partition info and compile TWRP for G920A. If so, can one try to install custom recovery like TWRP and verify if bootloader is locked? It feels to me that this may work. Do you see any flaws?
One possible flaw is that if bootloader is locked, it will prevent recovery from loading. So the phone will be without a working recovery. In that case, can factory recovery be re-installed using Odin?
Also, will any of the above steps trigger the KNOX flag?
Click to expand...
Click to collapse
You don't have to get partition info, and compile TWRP. All S6 variants are using same partition name scheme and there are no difference on TWRP builds between S6 variants (except kernel and DTB).
The bootloader won't allow you to flash any custom recovery image (via Odin or in Android OS). If you could flash it, It won't boot it up anyway.
I don't have any idea about the KNOX trigger on AT&T variant devices, but I think it won't increase anyway.
forumber2 said:
You don't have to get partition info, and compile TWRP. All S6 variants are using same partition name scheme and there are no difference on TWRP builds between S6 variants (except kernel and DTB).
The bootloader won't allow you to flash any custom recovery image (via Odin or in Android OS). If you could flash it, It won't boot it up anyway.
I don't have any idea about the KNOX trigger on AT&T variant devices, but I think it won't increase anyway.
Click to expand...
Click to collapse
Sorry, I perhaps misunderstood from your last post that since custom recovery is not available for G920A it implied its partition info was different from other variants. If it is the same partition structure for all variants, then I guess we can use the TWRP for the G920F international version for which bootloader is unlocked.
Now that we agree that TWRP is available for use on G920A, the next question is how to load it. My thought is that if the device is rooted that means one can use dd at root shell prompt to write TWRP to the recovery partition, without using Odin or the current bootloader. Do you agree?
Not sure I understand why you say that if one could flash TWRP it would not boot anyways. If bootloader is unlocked (which is what we are testing here), then it should boot, right?
jilebi said:
Sorry, I perhaps misunderstood from your last post that since custom recovery is not available for G920A it implied its partition info was different from other variants. If it is the same partition structure for all variants, then I guess we can use the TWRP for the G920F international version for which bootloader is unlocked.
Now that we agree that TWRP is available for use on G920A, the next question is how to load it. My thought is that if the device is rooted that means one can use dd at root shell prompt to write TWRP to the recovery partition, without using Odin or the current bootloader. Do you agree?
Not sure I understand why you say that if one could flash TWRP it would not boot anyways. If bootloader is unlocked (which is what we are testing here), then it should boot, right?
Click to expand...
Click to collapse
A custom recovery is not available for G920A, because no one could try any custom recovery on G920A due to locked bootloader.
Yes you can write the recovery image via dd at root shell prompt.
And yes, If bootloader is unlocked, it will boot it up.
Sorry to ressurect this old thread, but can you (or anybody else who is knowledgeable) answer the following?
1. Since custom recovery is not available for G920A, which of the Tmobile/Sprint/International versions of TWRP custom recovery would you recommend to use for testing if bootloader is unlocked, using either ODIN or dd method?
2. If bootloader is unlocked, you are suggesting below that it should boot up. However, if it is locked, then will the phone still boot up? i.e. if one does not go into recovery mode, will it still boot up or does the bootloader check if both recovery and kernel are signed and if it finds that the recovery is unsigned, will it also prevent the signed kernel from booting up?
Thanks!
forumber2 said:
A custom recovery is not available for G920A, because no one could try any custom recovery on G920A due to locked bootloader.
Yes you can write the recovery image via dd at root shell prompt.
And yes, If bootloader is unlocked, it will boot it up.
Click to expand...
Click to collapse
Bricked Pixel 2 - locked bootloader & no access to developer options - please help
Hello guys, I just bought myself a Pixel 2 device today and decided to have a go at some changes: I've unlocked my bootloader of my Pixel 2 to perform TWRP flashing & Magisk installation and afterwards I decided to revert to stock.
The first step that I did when trying to revert to stock was to relock the bootloader via adb because I thought (big mistake) this will also revert everything to the factory image. Problem is right now the device isn't booting anymore (so I cannot change anything in developer settings and the bootloader is locked).
Fastboot does work now (I get an "FA8271A02780 fastboot" message when typing fastboot devices) but I cannot flash anything (it always says FAILED: remote Flashing unlock is not allowed.
I tried the Deuces script and UAF but they don't work (because my bootloader is locked). Given that I cannot unlock it, is there any way of flashing the stock image on my device? Any help is appreciated. Thanks a lot.
Sadly I don't believe so. Google doesn't allow us to flash anything without bootloader being unlocked. Other OEMs either have a program or allow you flash signed roms with a locked bootloader. For the trouble iTunes is at least you flash firmware through in the event of a Brick
We flashing v35 engineering bootloaders
1. enable USB-Debugging
2. Enable OEM unlock
3. enter into 9008 mod
4. do step by step instructions. Video youtube: p8Z0KOUNw7Q
5. And then "fastboot oem unlock" will work.
LG_LG+G7+Unlock+Bootloader.zip on mega nz
#!P2wDBa4R!NLS6k9QAK0-I2PWdACqEOiKdUpGzisrxnh1876cRTKU
copy of instructions from youtube on mega nz
#!XuhDDCRJ!8kUG3MWgQCeDhKIJqRcKJc0TTvAeNeP7RodkbZ-mGrs
Because when you 'fastboot oem unlock' successful.
you phone just unlocked bootloader, so you can flash root booted to root you phone.
Flashing back to Stock KDZ: we can flash the stock KDZ for the G7 and keep booloader unlocked but -- depending on version -- we loose access to fastboot commands. To avoid this he mentions using patched LGUP to flash the KDZ, making sure to uncheck the bootloader partitions
Please be aware that the v35 bootloader will hard brick your phone, if you flash stock pie kdz without bootloader partitions. I was in that situation and only recovery option was octoplus again.
The owner of that video is @motogvasyag
https://forum.xda-developers.com/lg-v40/how-to/remote-unlocking-bootloader-models-t-t3946648
cheeze.keyk said:
The owner of that video is @motogvasyag
https://forum.xda-developers.com/lg-v40/how-to/remote-unlocking-bootloader-models-t-t3946648
Click to expand...
Click to collapse
yes. and i link his youtube channel
It works using Pie?
If I flash KDZ and lost Fastboot I can install another KDZ to recover fastboot access?
Why not t-mobile?
There appears to be a post (from two days back) on one of the famous Russian forums showing a way to do this without Octoplus by temporarily booting using a rooted boot and then replacing the bootloader using a root terminal and finally doing the unlock using "fastboot oem unlock". Has anyone here tried it / have any thoughts on it?
can keep Fastboot on Slot a when update to Android Pie
LG G6 ThinkQ Unlocking Product
ruvhell said:
We flashing v35 engineering bootloaders
1. enable USB-Debugging
2. Enable OEM unlock
3. enter into 9008 mod
4. do step by step instructions. Video youtube: p8Z0KOUNw7Q
5. And then "fastboot oem unlock" will work.
LG_LG+G7+Unlock+Bootloader.zip on mega nz
#!P2wDBa4R!NLS6k9QAK0-I2PWdACqEOiKdUpGzisrxnh1876cRTKU
copy of instructions from youtube on mega nz
#!XuhDDCRJ!8kUG3MWgQCeDhKIJqRcKJc0TTvAeNeP7RodkbZ-mGrs
Because when you 'fastboot oem unlock' successful.
you phone just unlocked bootloader, so you can flash root booted to root you phone.
Flashing back to Stock KDZ: we can flash the stock KDZ for the G7 and keep booloader unlocked but -- depending on version -- we loose access to fastboot commands. To avoid this he mentions using patched LGUP to flash the KDZ, making sure to uncheck the bootloader partitions
Click to expand...
Click to collapse
I have a question about the Octoplus Pro Box. Is this product better than the Infinite Box Chinese Miracle II? We have some ex demo phones without an IMEI where we need the boot sector unlocked. We want to flush the OS to install a new OS, e.g lineage or ubuntu., preferably an open source linux version. Do you recommend the Octoplus Pro Box or the Chinese Infinite Box Miracle II and why would you prefer one over the other? Thanks for your feedback.
hello,
i did unlock the bootloader for my zenfone 7 pro
and installed twrp recovery then rooted via magisk
cuz I wanted voLTE but it didn't work for me so I wanted to be back to stock
I relock the phone using fastboot command
fastboot oem asus-lock
it did relock my phone
but there is no OS nor Recovery !
when I power my phone on the fastboot UI appears. even if I select recovery nothing changes. opens fastboot only
how to re install the firmware ? help plz
in case anyone has the same problem.
i did solve it by flashing the (raw) firmware via fastboot ( Flash_AFT method )
M-772007 said:
hello,
i did unlock the bootloader for my zenfone 7 pro
and installed twrp recovery then rooted via magisk
cuz I wanted voLTE but it didn't work for me so I wanted to be back to stock
I relock the phone using fastboot command
fastboot oem asus-lock
it did relock my phone
but there is no OS nor Recovery !
when I power my phone on the fastboot UI appears. even if I select recovery nothing changes. opens fastboot only
how to re install the firmware ? help plz
Click to expand...
Click to collapse
There are new guides on how to get volte if you want to try again.
[Guide] Easy method to Enable Volte (with root) on Tmobile and maybe other networks on Android 11 and maybe 10
So first you have to root. I used twrp and magisk. There are guides on how to do that you can find by searching around. Then once you do that, follow these directions, What I did was manually entered all of these setprop commands below, on the...
forum.xda-developers.com
This is one but there are others if you need the help.
After relock bootloader i can send phone to warranty?
I tried to relock the phone with the command "fastboot oem asus-lock", but it shows "waitting for any device" and my phone just sit there and do nothing..
Any other method to relock the Zenfone 7 pro?
M-772007 said:
hello,
i did unlock the bootloader for my zenfone 7 pro
and installed twrp recovery then rooted via magisk
cuz I wanted voLTE but it didn't work for me so I wanted to be back to stock
I relock the phone using fastboot command
fastboot oem asus-lock
it did relock my phone
but there is no OS nor Recovery !
when I power my phone on the fastboot UI appears. even if I select recovery nothing changes. opens fastboot only
how to re install the firmware ? help plz
Click to expand...
Click to collapse
I believe that relock is impossible and but to make the device recovery to installed status of stock rom keeping with unlock bootloader.
Please see my post. May make it help or not.
When I try to burn rom with TWRP, img burns but it doesn't start and zip gives an error and cannot burn.
When I first burned custom ROM (unofficial AEX), it did not start, so when I deleted the data from TWRP, it seems that I deleted things that should not be erased, so even if I burn it from the zip file, with the error message in the image below I...
forum.xda-developers.com
I factory reset my phone through TWRP after unlocking bootloader, rooting and bricking trying to get read write access.
But my bootloader is still unlocked and now preventing me from updating OTA update to Android 11.
As long as you remain unlocked you will not get updates. Just download the 11 stock ROM and fastboot it. You will be updated.
boltjuice said:
I factory reset my phone through TWRP after unlocking bootloader, rooting and bricking trying to get read write access.
But my bootloader is still unlocked and now preventing me from updating OTA update to Android 11.
Click to expand...
Click to collapse
You can get the firmware with LSMA
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
I just downloaded it and ran the rescue but it just flashed the rom and is still unlocked.
Is there an option to re-lock bootloader with that tool?
What is your carrier and where did you get your phone? Not every bootloader can be unlocked.
Carrier is metro PCS. Model # XT2113-2
I did a factory reset. But I still get the message bootloader is unlocked when it boots.
I just want to re-lock it and revert it back to stock.
ADB code: fastboot oem lock
didnt work. Just made my phone not boot with error "no valid operating system could be found."
ADB code: fastboot oem unlock
restored it to booting again with same bootloader is unlocked message.
Any way to re-lock this?
boltjuice said:
Carrier is metro PCS. Model # XT2113-2
I did a factory reset. But I still get the message bootloader is unlocked when it boots.
I just want to re-lock it and revert it back to stock.
ADB code: fastboot oem lock
didnt work. Just made my phone not boot with error "no valid operating system could be found."
ADB code: fastboot oem unlock
restored it to booting again with same bootloader is unlocked message.
Any way to re-lock this?
Click to expand...
Click to collapse
Re locking is not advisable, can be tricky with Moto devices
Re-Locking see Post #4
I'm a little unclear what state your device is in atm.
I just downloaded it and ran the rescue but it just flashed the rom
Click to expand...
Click to collapse
but then you write
I just want to re-lock it and revert it back to stock.
Click to expand...
Click to collapse
"it just flashed the rom" implies to me that the moto rescue software flashed a stock image so you now should be back to stock (I'm not sure what was downloaded tho). Regardless of how you flash (moto's rescue tool or by using fastboot with the device booted into the bootloader), I'd recomend using an image specific to MetroPCS (assuming the device was originally a metroPCS device and not something else like retus) and not one older than the last stock version flashed to your device.
It might help to boot your device into the bootloader, and then record the output of
Code:
fastboot getvar all
the lines with `ro.build.fingerprint` (perhaps also ro.carrier) in them will tell you what bootloader is currently running on your device and should help you figure out what the last stock version was flashed to your device.
HTH
notmyrealhandle said:
I'm a little unclear what state your device is in atm.
but then you write
"it just flashed the rom" implies to me that the moto rescue software flashed a stock image so you now should be back to stock (I'm not sure what was downloaded tho). Regardless of how you flash (moto's rescue tool or by using fastboot with the device booted into the bootloader), I'd recomend using an image specific to MetroPCS (assuming the device was originally a metroPCS device and not something else like retus) and not one older than the last stock version flashed to your device.
It might help to boot your device into the bootloader, and then record the output of
Code:
fastboot getvar all
the lines with `ro.build.fingerprint` (perhaps also ro.carrier) in them will tell you what bootloader is currently running on your device and should help you figure out what the last stock version was flashed to your device.
HTH
Click to expand...
Click to collapse
I factory reset the phone. Everything gets reset except for the unlocked bootloader does not re-lock... which prevents me from OTA update to Android 11.
Ok. If I understand correctly, your post with "it just flashed the rom" means a factory reset (and no flashing an image via moto's rescue tool or fastboot) - my misunderstanding.
As I mentioned to you in my reply to your PM, I don't use stock other than to initially get the bootloader unlocked, test a few things, and occasionally verify that my device still works on stock.
Others posting in this thread have offered helpful and safe suggestions - consider following these. I do a fair amount of "risky" tweaking with custom roms so please be cautious about the following suggestions/observations. (Apologies if my comments below seem basic - it looks like you've tried some fairly sophisticated tweaking of your own but it's hard to judge others skill level in a forum.)
Based on your comment:
made my phone not boot with error "no valid operating system could be found."
Click to expand...
Click to collapse
I suspect your phone wont boot after re-locking due to prior modifications to it's OS, the evidence of which can survive a factory reset. Re-locking enables android to verify that certain parts of the OS have not been modified and if it detects a difference, the device won't boot.
If you insist on re-locking your device now, I think the only way to accomplish that is to re-flash your device with the correct factory (aka stock) image some of which are available on lolinet. This is much more than a "factory reset." The instructions linked by sd_shawdow above should help with this:
Re-Locking see Post #4
Click to expand...
Click to collapse
Choosing the correct factory image is important. For example, I have a XT2113-2 RETUS. At one point early on when I was playing with this device, I tried flashing the TMO variant which is also a XT2113-2 model. My device did not boot until I re-flashed a RETUS variant. It's possible I just made a mistake while trying to flash the TMO variant I can't be certain at this point. If your phone was originaly (meaning new out of the box) a MetroPCS variant, make sure you flash a MetroPCS image.
Android also has roll back protection to prevent reverting to an older image that might have security flaws. The roll back "index" can be written to persistent storage on your phone that not only will survive factory resets but likely also survives flashing factory images. Motorola's implementation of roll back protection does not seem consistent with what I've read online from android/google. I'm pretty sure I had the most recent Android 10 RETUS bootloader on my device but I was able to flash an older factory image and then relock the device while on stock. (As I mentioned in my PM, I have not tried re-locking stock android 11). This observation may be the result of a motorola bug specific to RETUS so don't count on this working for you. Flash an image that is the same as or newer than the newest factory image you've ever had on the device.
Moto's rescue tool apparently can select and download an image for you making the process of image selection easier. I have not used this tool so I don't know how smart it is. Trust your knowledge about what you've done with the device since you owned it.
Lastly, it looks like the OEM unlocking toggle issue I and others have observed upon upgrading to Android 11 is resolved by connecting the device to your carrier and waiting several days. If you don't mind the wait, it's probably safe to flash android 11 (by using an image form lolinet and fastboot or by using the moto rescue tool - not via ota) while the device is unlocked and then re-locking the device.
Sorry about the long post.
HTH.
EDIT: I prefer not to be PM'd. Please just communicate (with me) in the open.
I was on Lineage 19.1 on my 5g ace. When I heard about the version 11 software for Retail US, I went to the lolinet mirrors to download the firmware for my phone.
Make sure oem unlocking in the developer options menu is off. If you can't turn it off you will need to root your phone.
Make sure USB debugging is on and you allow access for the pc your using.
Start adb and verify it sees your phone. If so, type...
reboot bootloader
Verify fastboot is authorized
Use Motoflash Pro to flash the version 11 firmware to my phone. Motoflash can be downloaded from the one 5g ace telegram channel. When it is done close Motoflash Pro and then from your pc use adb to run:
fastboot oem lock
Your phone will ask you if you want to relock bootloader. Choose Yes
Now reboot to the stock recovery and then use power + Volume up to access the recovery menu.
Navigate down to factory reset and select. It will warn you ... Blah blah blah. Now choose reboot system.
Moto boot logo should appear and then setup should begin.
Hopefully this helps someone.