Hey guys,
I just got a used S8+. Upon booting up it was a clean factory reset. I went forward with the setup.
When i open up Samsung Pay i get the "samsung pay access to samsung pay has been denied...." msg.
This phone is not rooted, i have downloaded a root check and comes back as false.
The person who had the phone never rooted the phone.
And i also get this notification " Security Notice, unauthorized actions have been detected..."
Also secure folder has issues.
Secure folder cannot be set up because unauthorized software was installed on the device.
Anyone know what could be wrong with it?
try reset with smart switch on pc.
MINTED7 said:
try reset with smart switch on pc.
Click to expand...
Click to collapse
The new SS does not allow resetting.
I just launched it and it said that.
Unless you know of a version that supports this.
Hello! I have Knox Enterprise Enrollment service active on my J330F (J3 2017 - android 7) and I want to remove it but I don't know how. I tried with TWRP installed, but no luck. Is possible to permanently remove Knox Enterprise Entrollment service from Samsung J330F ?
Knox is a PIA
The only thing I hve been able to do with knox is reset the phone back to factory then use All in one toolbox to cancel it's startup entry. Basically keeps it from booting when you restart your phone. other than that i have no other options. If anyone else has the solution, please let us know.
diavas2007 said:
Hello! I have Knox Enterprise Enrollment service active on my J330F (J3 2017 - android 7) and I want to remove it but I don't know how. I tried with TWRP installed, but no luck. Is possible to permanently remove Knox Enterprise Entrollment service from Samsung J330F ?
Click to expand...
Click to collapse
huckfinn9 said:
The only thing I hve been able to do with knox is reset the phone back to factory then use All in one toolbox to cancel it's startup entry. Basically keeps it from booting when you restart your phone. other than that i have no other options. If anyone else has the solution, please let us know.
Click to expand...
Click to collapse
Can you please provide how to use the all in one toolbox thing to do what you did ?
ion my case, A520F, the knox thing enables FRP Lock, so, it is a bit hard...
I can use Combination file to access Adb mode, then can Remove FRP, and gain partial access to system, but after knox runs, it enables its security policy and enable FRP again and disable ADB access
yurais said:
Can you please provide how to use the all in one toolbox thing to do what you did ?
ion my case, A520F, the knox thing enables FRP Lock, so, it is a bit hard...
I can use Combination file to access Adb mode, then can Remove FRP, and gain partial access to system, but after knox runs, it enables its security policy and enable FRP again and disable ADB access
Click to expand...
Click to collapse
You have to stop the start up entry with thew Boot Speedup option in All in one Toolbox. You will see "User Apps" on the left and "System Apps" on the right. Choose System apps and then scroll till you find the Knox apps. You have to disable all of them I think. They are the Knox Folder container, Knox Apps Update, Knox Setup Wizzard, Knox Enrollment Service and the Knox app itself. And this only stops it from starting up when you reboot the phone. Whatever triggers it to start after the phone boots is a mystery to me, I sure as hell dont try to open it myself, LOL! That is why you have to disable all of it and immediately try to root the phone as soon as it boots up. Don't give it time to wake up!
Hello everyone
Here is new method to root all Samsung devices,twrp not needed.
First you need to download EFTSU tool: https://mega.nz/file/34lDEBqB#7mSv2SeYKP2kReheBk7q5AU582TZUdsJy6GL5sd7O-I
Then you need file from this website where you can find for your device and download it : https://eftsu.com/
After you downloaded this file put your samsung device in download mode *need oem unlock* then flash your file with eftsu tool.
Your device will reboot it and it will during boot ask to reset ,then reset it.
When it comes to system you need to download and install eftsu manager: https://mega.nz/file/Oo1yCSiQ#rWlMbcBiBHSzv5oMioyGxQZ0ynxqaeqz_Nfm4ze240c
And you are done.
You can also install root checker to see if it rooted.
jasmin811 said:
root all Samsung devices
...
*need oem unlock*
Click to expand...
Click to collapse
US/CA Sammys: hmmm...
The rest are rather easy to root with Magisk anyway.
AndyYan said:
US/CA Sammys: hmmm...
The rest are rather easy to root with Magisk anyway.
Click to expand...
Click to collapse
There is more supported devices besides samsung that will work just look at the website above eftsu.com
If there is no device model supported in the list,just tell me an will add it.
if you need any help with it,I can help you.
What I'm looking for is twrp working for M105G,because with M105F is also working but during boot it ask for password,even if i format data in twrp.
I have note10 plus SM-N975U Snap dragon that has the OEM toggle missing and tried everything to make it appear but no luck and without that i can't install anything or unlock the bootloader......Any tools or ideas to overcome my situation?
if no oem in developer option than you have to wait for 7 days .
Hello! I want to root my Samsung Galaxy A01 with firmware A015MUBS3ATL8, I found all the files that I should download, but no way to unlock the bootloader, I did all the guides and when it asks me for confirmation on the bootloader screen to unlock it, I affirm and the phone is formatted and it reboots, but when re-entering the bootloader it is still blocked
Sorry for my bad English, I'm using Google Translate
Please help.
My phone is SM-G955F with Exynos processor. Hungarian XEH code. The latest PIE is running on it. OEM does not allow unlocking. The slider can be turned on, but it also turns off immediately after enabling. What can I do to make OEM resolution work?
Thank you.
jasmin811 said:
Hello everyone
Here is new method to root all Samsung devices,twrp not needed.
First you need to download EFTSU tool: https://mega.nz/file/34lDEBqB#7mSv2SeYKP2kReheBk7q5AU582TZUdsJy6GL5sd7O-I
Then you need file from this website where you can find for your device and download it : https://eftsu.com/
After you downloaded this file put your samsung device in download mode *need oem unlock* then flash your file with eftsu tool.
Your device will reboot it and it will during boot ask to reset ,then reset it.
When it comes to system you need to download and install eftsu manager: https://mega.nz/file/Oo1yCSiQ#rWlMbcBiBHSzv5oMioyGxQZ0ynxqaeqz_Nfm4ze240c
And you are done.
You can also install root checker to see if it rooted.
Click to expand...
Click to collapse
Hi
Samsung Galaxy Note 10+ not supported?
OEM unlock still doesn't work.
bautigarzabal said:
Hello! I want to root my Samsung Galaxy A01 with firmware A015MUBS3ATL8, I found all the files that I should download, but no way to unlock the bootloader, I did all the guides and when it asks me for confirmation on the bootloader screen to unlock it, I affirm and the phone is formatted and it reboots, but when re-entering the bootloader it is still blocked
Sorry for my bad English, I'm using Google Translate
Click to expand...
Click to collapse
you need to ulock developer option in setting-about phone-build info and tap 7 times in it.
Ptreki said:
OEM unlock still doesn't work.
Click to expand...
Click to collapse
activate also usb debbuging
fazi78 said:
Hi
Samsung Galaxy Note 10+ not supported?
Click to expand...
Click to collapse
check if there is file for you model in website
jasmin811 said:
usb debbuging-ot
Nem, nem, nem, nem, nem
I activated it too, but nothing happens.
Click to expand...
Click to collapse
I have a samsung galaxy j4 +
I got it from a friend today.
The phone is after a hard reset (some dumbass did it)
Unfortunately, there is no access to google accounts because the accounts were from her husband and he died.
I keep searching and trying but can't root. Because Debug Usb doesn't go on.
And the computer doesn't read the phone after all.
Yes, I have drivers installed, various Odins, I also took your EFTSU, Fastboot and I do not read my phone anywhere. Nothing else is just loading.
Yup i trying Hard reset many many times...
Jerry3Tears said:
I have a samsung galaxy j4 +
I got it from a friend today.
The phone is after a hard reset (some dumbass did it)
Unfortunately, there is no access to google accounts because the accounts were from her husband and he died.
I keep searching and trying but can't root. Because Debug Usb doesn't go on.
And the computer doesn't read the phone after all.
Yes, I have drivers installed, various Odins, I also took your EFTSU, Fastboot and I do not read my phone anywhere. Nothing else is just loading.
Yup i trying Hard reset many many times...
Click to expand...
Click to collapse
try to frp unlock your phone,you have here on xda tuts how to do it,just search for it.
what do you mean nothing happened?
I can't unlock the OEM with either method.
did you follow the guide i wrote above?
First you need file downloaded from the website and with the eftsu tool flash it in download mode,the when phone is reseted and comes in system install eftsu manager and root checker and in root checker you have to see if it's rooted or not.
Hey,
I have a bunch of devices that are enrolled with an MDM. They don't have a standard Google account activated since these are meant to be company owned, which means no FRP activated through Google.
The issue at hand is that if I factory reset through the recovery mode and then start the phone there is nothing blocking the device from being used as a normal device. This is not good enough because and I need some way to make the process harder to dissuade malicious intent.
One way to do this is with a Custom ROM. https://www.hexnode.com/mobile-devi...id-devices-in-hexnode-mdm-by-configuring-rom/ https://www.hexnode.com/blogs/the-big-hows-of-managing-custom-android-os-in-the-workplace/
So that leaves me with a question if it's possible to take the stock ROM and just add the MDM APK with the configuration. As I understand, this would always then boot into the MDM configuration, leaving any other option of the table. (As long as the device is not flashed with stock ROM again.)
Another option, which I can't see if possible is if the whole Recovery Mode menu can be disabled/locked with a passcode, making it not possible to do a wipe through this way.
Appreciate all the help I can get with this as I'm new to this scene!
the mdm devices are running bythe admin mdm policies, the admin must enable or disable features from the phone or add more security steps
tutibreaker said:
the mdm devices are running bythe admin mdm policies, the admin must enable or disable features from the phone or add more security steps
Click to expand...
Click to collapse
I've tested this with Scalefusion, Hexnode and had a chat with SOTI.
All of them say that it's not possible to lock or disable the access to the Recovery Menu that you can access by holding the Power button + Volume up and then Wiping the data and restarting the phone as a new device.
If there would be a way to disable this menu, then that would be great. But according to them they can't do that since it might brick the phone.
So now it's either solving a solution myself for this or trying Samsung Knox devices that offer more options regarding this problem.
I recently got a new phone from the Troomi carrier. They sell a Samsung A32 5G phone and it is very locked down. I have done some digging and managed to enable USB debugging, but I can't manage to root it. I can install apps, but the Knox app control quickly disables it. The app is still installed, but can't be seen without adb. I have managed to rename the package name for an app to that of an app that is allowed. That worked until my mom discovered this and deleted the app from my phone and I haven't been able to recreate it. I also can't enter download mode or install a custom bootloader. Factory resetting is also blocked.
Any help is apprechiated.
JGraham26
Did you figure anything out with this?
No, but I'm still trying