Question s22 ultra change firmware from uae to india - Samsung Galaxy S22 Ultra

Hello. I bought an s22 ultra SM-S908E/DS in Dubai/UAE but I have now moved to India permanently. The phone lacks the CALL RECORDING feature. I hear also Samsung Pay India does not work. Not sure if there are any other issues. Please can someone guide me on how to change.
I tried an earlier post for an older phone - go recovery, factory reset, reboot with indian sim card - but this does NOT work. I've tried it twice now.
Is there another option available ? Can I download the latest India firmware from from the site below and upgrade the firmware using Odin ? Any specific settings or process to be considered ? It will also be useful to know if there is someone on this forum who has successfully migrated - and got the call recording enabled etc.
Download Samsung Galaxy S22 Ultra SM-S908E INS India firmware
All Samsung firmwares for Galaxy S22 Ultra in India with model code SM-S908E. We offer free and fast download options. Check them out now.
www.sammobile.com
I will be very grateful for your assistance.
PS. Another post I read asked if the phone has 'test mode'. What is test mode ? Is this the test mode you get by typing *#0*# in the call option ? It does have it..

UAE and India both sharing OXM group so it doesn't make any difference by flashing firmware as both are same.
Using Indian SIM should be fine, if not, just factory reset with keeping Indian SIM installed should work, it's weirdo it doesn't work
Kindly post screenshot of setting - about phone - software info

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Meanwhile, I called Samsung Care India ( Kerala ) and tried to ask if they can assist - and and they will not upgrade/change the firmware it seems - which I find quite strange.
Will try the firmware and advise update asap. I sincerely hope it is successful. The phone is still under warranty.... so very keen to know if someone has already successfully upgraded this.
PS. Also, I hear that the code *#*#27262826#*#* was used with earlier Android versions to get the CSC codes included in your phone. Is there something similar which displays for the s22 ultra running

imustbehuman said:
Meanwhile, I called Samsung Care India ( Kerala ) and tried to ask if they can assist - and and they will not upgrade/change the firmware it seems - which I find quite strange.
Will try the firmware and advise update asap. I sincerely hope it is successful. The phone is still under warranty.... so very keen to know if someone has already successfully upgraded this.
PS. Also, I hear that the code *#*#27262826#*#* was used with earlier Android versions to get the CSC codes included in your phone. Is there something similar which displays for the s22 ultra running
Click to expand...
Click to collapse
Are you sure you have Indian SIM installed? Info doesn't showing Indian SIM
If still issue you can change CCS with this tool

Thanks for this info. Yes. Indian sim installed. Infact, did a reset both a BSNL sim and also with a Vi ( Vodafone-Idea ) sim - and yet - I don't have these.
So - please can you provide more detail on what needs to be done with this tool ? am I looking to change CSC only ? or FRP ? Please provide some detailed info if available - thanks.

As an update.. and for the benefit of others.
Samsung s22 ultra SM-S908E purchased in UAE ( XSG ).
Downloaded latest INS firmware files from sammobile. Used all files AP/BL/CP. Used CSC ( not home-csc). did not use the repartition option. Firmware went thru - however software remained as XSG.
Retried firmware with the repartition option - but Odin failed.
Thereafter, used the SamFw FRP Tool 3.31 and changed CSC to INS - which successfully changed for ins/ins,ins/xsg/xsg ( not sure if this is normal ).
But now, call recording function is now enabled. and no issues with Indian sim. I hope OTA updates will continue.
Will be keen to hear any further concerns or suggestions.

imustbehuman said:
As an update.. and for the benefit of others.
Samsung s22 ultra SM-S908E purchased in UAE ( XSG ).
Downloaded latest INS firmware files from sammobile. Used all files AP/BL/CP. Used CSC ( not home-csc). did not use the repartition option. Firmware went thru - however software remained as XSG.
Retried firmware with the repartition option - but Odin failed.
Thereafter, used the SamFw FRP Tool 3.31 and changed CSC to INS - which successfully changed for ins/ins,ins/xsg/xsg ( not sure if this is normal ).
But now, call recording function is now enabled. and no issues with Indian sim. I hope OTA updates will continue.
Will be keen to hear any further concerns or suggestions.
Click to expand...
Click to collapse
Hi, after changing your CSC to INS are you getting OTA updates ?
Any other changes with the device ?

Rockie2717 said:
Hi, after changing your CSC to INS are you getting OTA updates ?
Any other changes with the device ?
Click to expand...
Click to collapse
Yes - OTA updates are working. I have received atleast one since I upgraded. No other changes I can find as yet - except that the software shows a dual INS/INS,INS/XSG/XSG on my phone and I wonder what that means

Hi @imustbehuman,
I am also thinking of buying the dubai unit, want to know if 5G and Spay is working for you after csc change.
Also, for how much did you buy and from where.

Bought on Amazon. I believe Samsung pay works but I have not used it. Adding accounts etc definitely works fine. 5G works fine in Dubai but I have not tested in India ( as yet ) since my sim operator Vodafone does not have 5G in this area as yet. But if it works in one place - then it should work fine elsewhere as well.

imustbehuman said:
As an update.. and for the benefit of others.
Samsung s22 ultra SM-S908E purchased in UAE ( XSG ).
Downloaded latest INS firmware files from sammobile. Used all files AP/BL/CP. Used CSC ( not home-csc). did not use the repartition option. Firmware went thru - however software remained as XSG.
Retried firmware with the repartition option - but Odin failed.
Thereafter, used the SamFw FRP Tool 3.31 and changed CSC to INS - which successfully changed for ins/ins,ins/xsg/xsg ( not sure if this is normal ).
But now, call recording function is now enabled. and no issues with Indian sim. I hope OTA updates will continue.
Will be keen to hear any further concerns or suggestions.
Click to expand...
Click to collapse
Hi I am in a same situation..bought an s23 ultra from Dubai and using it in India.The call recording and Spay is not working here..So just to confirm do I need to try installing an Indian firmware from sammobiles or I only need to change the CSC to INS using FRP tool? ..Hope you will help me in this

Delvin619 said:
Hi I am in a same situation..bought an s23 ultra from Dubai and using it in India.The call recording and Spay is not working here..So just to confirm do I need to try installing an Indian firmware from sammobiles or I only need to change the CSC to INS using FRP tool? ..Hope you will help me in this
Click to expand...
Click to collapse
You only need to change CSC to INS , no need for indian firmware, since it is a part of OXM software group

hoss_n2 said:
You only need to change CSC to INS , no need for indian firmware, since it is a part of OXM software group
Click to expand...
Click to collapse
I have s22 from usa and using it in india and not getting OTA updates any idea how can i get these updates?

Delvin619 said:
Hi I am in a same situation..bought an s23 ultra from Dubai and using it in India.The call recording and Spay is not working here..So just to confirm do I need to try installing an Indian firmware from sammobiles or I only need to change the CSC to INS using FRP tool? ..Hope you will help me in this
Click to expand...
Click to collapse
just found this in my junk mail. Hope all sorted. But the steps I have indicated is exactly what I've done.

hoss_n2 said:
You only need to change CSC to INS , no need for indian firmware, since it is a part of OXM software group
Click to expand...
Click to collapse
If I remember well - I read the same thing earlier but it did not work for me. And I had to go through all the steps I mentioned.

imustbehuman said:
If I remember well - I read the same thing earlier but it did not work for me. And I had to go through all the steps I mentioned.
Click to expand...
Click to collapse
Sure you are doing something Wrong , It've been tested 100 times over this forum including myself , no need to flash a complete INS firmware as long as your device is with OXM firmware

Related

can any expert give me a hand with my essiu!! please

i have a galaxy s7 on its back wrote g930F with a serial number engraved , its the same imei when i type #06#
when i turned it into download mode it said g930U not F and it has a snapdragon 820 cpu so it means its a g930U
i installed mobile info app the info's are
General
phone model : SM-G930F
device type :heroqlteue
product name : heroqlteue
country of origin: "empyt"
in firmware section
bootloader version : G930UUEU4API3
PDA VERSION : G930FUEU4API3/G930UUEU4API3
CSC version: G930UOYM4API3
Baseband version : G930UUEU4API3
latest firmware : not found
--------------------------------------------------------------------------
i am on android 6.0.1 and when i try update it shows registering device .... than processing failed
any help please!!:crying::crying::crying::crying:
houssam1984 said:
i have a galaxy s7 on its back wrote g930F with a serial number engraved , its the same imei when i type #06#
when i turned it into download mode it said g930U not F and it has a snapdragon 820 cpu so it means its a g930U
i installed mobile info app the info's are
General
phone model : SM-G930F
device type :heroqlteue
product name : heroqlteue
country of origin: "empyt"
in firmware section
bootloader version : G930UUEU4API3
PDA VERSION : G930FUEU4API3/G930UUEU4API3
CSC version: G930UOYM4API3
Baseband version : G930UUEU4API3
latest firmware : not found
--------------------------------------------------------------------------
i am on android 6.0.1 and when i try update it shows registering device .... than processing failed
any help please!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
Hi
What mobile info app did you use? PhoneInfo ??
If not use that one . make sure you have the right model and that is original
You can always flash manually your firmware , check here
If you use home_csc ( has to be the same csc you have in your phone now , check csc with phoneinfo) you will not factory reset your phone.
BTW you are in the wrong forum , this is for the exynos model
Check here at the bottom are the links for all the snapdragon models
Yep, like MAX says, your phone is G930U, you will likely not get OTA updates until you flash the correct firmware to it, as it has been faked to look like a G930F
*Detection* said:
Yep, like MAX says, your phone is G930U, you will likely not get OTA updates until you flash the correct firmware to it, as it has been faked to look like a G930F
Click to expand...
Click to collapse
thank you so much but i am a begginer and i didnt understand what should i do if you can show me an exact thread will be really helpfull thank you again for replying
MAX 404 said:
Hi
What mobile info app did you use? PhoneInfo ??
If not use that one . make sure you have the right model and that is original
You can always flash manually your firmware , check here
If you use home_csc ( has to be the same csc you have in your phone now , check csc with phoneinfo) you will not factory reset your phone.
BTW you are in the wrong forum , this is for the exynos model
Check here at the bottom are the links for all the snapdragon models
Click to expand...
Click to collapse
thank you sooo much . yes i used the app from the store phone INFO
i dont live in usa so can i flash any g930U firmware and still have network and other things work normally or should i do something else . sorry i really want to get android N but i am afraid to brick my phone
houssam1984 said:
thank you so much but i am a begginer and i didnt understand what should i do if you can show me an exact thread will be really helpfull thank you again for replying
Click to expand...
Click to collapse
Copy from this tutorial, but change F to U for the ROM
http://forum.xda-developers.com/showpost.php?p=72343969&postcount=6
houssam1984 said:
thank you sooo much . yes i used the app from the store phone INFO
i dont live in usa so can i flash any g930U firmware and still have network and other things work normally or should i do something else . sorry i really want to get android N but i am afraid to brick my phone
Click to expand...
Click to collapse
*Detection* said:
Copy from this tutorial, but change F to U for the ROM
http://forum.xda-developers.com/showpost.php?p=72343969&postcount=6
Click to expand...
Click to collapse
Any time mate.
Just follow instructions as *Detection* indicated and you will be fine
no success ; and when i went to sammobile and typed the g930UUEU4API3 i found lot of versions i didnt know what to choose !!
i am really confused
houssam1984 said:
no success ; and when i went to sammobile and typed the g930UUEU4API3 i found lot of versions i didnt know what to choose !!
i am really confused
Click to expand...
Click to collapse
no success with what? please explain
For the version we need to know what carrier you use , also what country
MAX 404 said:
no success with what? please explain
For the version we need to know what carrier you use , also what country
Click to expand...
Click to collapse
i used the software from samFirm it cant find any update
when i went to updato.com i found lot of versions , i didnt know what to choose
on my phone phone INFO shows PDA : G930FUEU4API3/G930UUEU5API3
the liste in update.com website dont show this one .
if G930UUEU4API3 is android 6.0.1 wich one i choose for android 7.0 ????
or should i reflash android 6.0.1 then look for ota update ??? !!!
houssam1984 said:
i used the software from samFirm it cant find any update
when i went to updato.com i found lot of versions , i didnt know what to choose
on my phone phone INFO shows PDA : G930FUEU4API3/G930UUEU5API3
the liste in update.com website dont show this one .
if G930UUEU4API3 is android 6.0.1 wich one i choose for android 7.0 ????
or should i reflash android 6.0.1 then look for ota update ??? !!!
Click to expand...
Click to collapse
What carrier are you using?.......
All snapdragon versions are compatible.....the only difference are the carrier specific configuration ( verizon , t mobile...)
MAX 404 said:
What carrier are you using?.......
All snapdragon versions are compatible.....the only difference are the carrier specific configuration ( verizon , t mobile...)
Click to expand...
Click to collapse
no no i am not in the usa i am in north africa exactly algeria the carrier is "mobilis"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
houssam1984 said:
no no i am not in the usa i am in north africa exactly algeria the carrier is "mobilis"
Click to expand...
Click to collapse
Pictures did not show......
The G930U is the unlock version you can use any of the G930U firmware pick the one you like the best , the newest...... they all will work..
https://forum.xda-developers.com/sprint-galaxy-s7/help/bloat-free-firmware-930u-tried-t3428974
Just do not pick one with a CDMA carrier as in your country that will not worlk
http://www.unlockedshop.com/full-list-cdma-carriers-usa/
AS I said before you may have better luck asking in the right forum.....this is the exynos forum and you are Snapdragon
MAX 404 said:
Pictures did not show......
The G930U is the unlock version you can use any of the G930U firmware pick the one you like the best , the newest...... they all will work..
https://forum.xda-developers.com/sprint-galaxy-s7/help/bloat-free-firmware-930u-tried-t3428974
Just do not pick one with a CDMA carrier as in your country that will not worlk
http://www.unlockedshop.com/full-list-cdma-carriers-usa/
AS I said before you may have better luck asking in the right forum.....this is the exynos forum and you are Snapdragon
Click to expand...
Click to collapse
http://www.hostingpics.net/viewer.php?id=825582Screenshot201705192014461.png
http://www.hostingpics.net/viewer.php?id=825582Screenshot201705192014461.png
http://www.hostingpics.net/viewer.php?id=114351Screenshot201705192002401.png
http://www.hostingpics.net/viewer.php?id=114351Screenshot201705192002401.png
http://www.hostingpics.net/viewer.php?id=170216Screenshot201705192014521.png
http://www.hostingpics.net/viewer.php?id=170216Screenshot201705192014521.png
http://www.hostingpics.net/viewer.php?id=817583Screenshot201705192016371.png
http://www.hostingpics.net/viewer.php?id=817583Screenshot201705192016371.png
http://www.hostingpics.net/viewer.php?id=737438Screenshot201705192016431.png
http://www.hostingpics.net/viewer.php?id=737438Screenshot201705192016431.png
--------------------------------------------------------------------------------------------------------------------------------
i hope you will see the pictures now , thank you for everything thank you so much i will see if i can find help on snapdragon forums . thank you again
houssam1984 said:
http://www.hostingpics.net/viewer.php?id=825582Screenshot201705192014461.png
http://www.hostingpics.net/viewer.php?id=825582Screenshot201705192014461.png
http://www.hostingpics.net/viewer.php?id=114351Screenshot201705192002401.png
http://www.hostingpics.net/viewer.php?id=114351Screenshot201705192002401.png
http://www.hostingpics.net/viewer.php?id=170216Screenshot201705192014521.png
http://www.hostingpics.net/viewer.php?id=170216Screenshot201705192014521.png
http://www.hostingpics.net/viewer.php?id=817583Screenshot201705192016371.png
http://www.hostingpics.net/viewer.php?id=817583Screenshot201705192016371.png
http://www.hostingpics.net/viewer.php?id=737438Screenshot201705192016431.png
http://www.hostingpics.net/viewer.php?id=737438Screenshot201705192016431.png
--------------------------------------------------------------------------------------------------------------------------------
i hope you will see the pictures now , thank you for everything thank you so much i will see if i can find help on snapdragon forums . thank you again
Click to expand...
Click to collapse
Those screenshots are useless, your phone model has been faked, just listen to MAX and flash any G930U apart from CDMA
special thanks to my super friends over here the bosses MAX 404 and * detection* it works i upgraded it to android N no problems with knox untill now the samsung pay downloaded normally and everything is working parfectly thank you thank you thank you :victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory:

Update S7 to nougat

Hey Guys
Please help me out i need to update my samsung S7 model number SM-G930W8 to Nougat . I got this phone from Canada it with Bell carrier lock it unlocked in India since using it . I did download firmware from Sammobile (there are so many firmware for model SM-G930W8 which one to download )
the which odin should i use . please help me out .
i dont know even if my phone is rooted out not . Samsang pay doesnt works by the way or does *#0*# menu appear it says no registered network
i can provide you with other details very necessary
Regards
Hemant Malhotra
bbobby88 said:
Hey Guys
Please help me out i need to update my samsung S7 model number SM-G930W8 to Nougat . I got this phone from Canada it with Bell carrier lock it unlocked in India since using it . I did download firmware from Sammobile (there are so many firmware for model SM-G930W8 which one to download )
the which odin should i use . please help me out .
i dont know even if my phone is rooted out not . Samsang pay doesnt works by the way or does *#0*# menu appear it says no registered network
i can provide you with other details very necessary
Regards
Hemant Malhotra
Click to expand...
Click to collapse
Hi
Details mate..
Where are you using the phone now , India?
Is the phone working , can it connect to your carrier in India?
Firmware , you can use XAC unbranded W8
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930W8/XAC/
What CSC do you have right now , use phoneinfo app to see it , if it is a different CSC than XAC , your phone will factory reset when changing CSC , you could use firmware with the same CSC you have and that way there will not be a factory reset, as reference check this threads
https://forum.xda-developers.com/galaxy-s7/how-to/official-stock-firmware-update-odin-t3369431
https://www.sammobile.com/forum/showthread.php?t=30800
Samsung pay will work if
Phone knox bit is not set
If the service is available in you country
And if the right CSC is in you phone
Check if you are rooted ( phone info will tell you) , check if Samsung pay is available, check your CSC
Thank you very much Max for detail answer
I used phoneinfo app you check CSC it is blank not CSC is there .
My phone is getting the network and very thing is working fine
i have samsung pay in india but it does not work in my phone .
Thanks for tell me the firmware to use . will it work even it is reset my phone .
which odin to flash it with ,
thank in advance buddy
really grateful
bbobby88 said:
Thank you very much Max for detail answer
I used phoneinfo app you check CSC it is blank not CSC is there .
My phone is getting the network and very thing is working fine
i have samsung pay in india but it does not work in my phone .
Thanks for tell me the firmware to use . will it work even it is reset my phone .
which odin to flash it with ,
thank in advance buddy
really grateful
Click to expand...
Click to collapse
Hi
Did you installed the Samsung app and followed the procedure?
For what I read i should work fine in India , if your knox bit is not set , try flashing a fresh rom and see if the problem is fixed
In Sammobile they will give you a link to the Odin version you need to use
good luck

Installing international Rom on SM-N9860

Hey guys and gals!
I made a horrible mistake I ordered the Note 20 Ultra on trading-shenzhen since I really wanted that snapdragon CPU. (I'm from Europe)
Now it seems that the blame is on me... because I realize that I can't download any apps with the pre-installed Google Play app.
So my one and only Idea now would be to install an international ROM BUT for the model SM-N9860 I can only find national ROMs/ from within the region of china.
Am I out of options here? ... Sammobile tells me that the newest German Firmware needs the Model SM-N986B
From my research it should be possible to change between regions.
My current plan is to go from my firmware (N9860ZCU1BTK3) to this: N986BXXU1ATGI
While following this guide: https://forum.xda-developers.com/t/i-successfully-changed-the-csc-of-my-sm-n986b-ds-exynos.4163629/
Thank you for your time and answer!
With kind regards
Chris
Try the HK ROM. I have the n9860 and it has everything. You got the best international device.
ekerbuddyeker said:
Try the HK ROM. I have the n9860 and it has everything. You got the best international device.
Click to expand...
Click to collapse
Oh! So you say there is a ROM from the same Region with all the google apps?
Your talking about that one?
Download Samsung Galaxy Note 20 Ultra 5G SM-N9860 TGY Hong Kong N9860ZSU1BTK3 firmware
Fast download latest Samsung Galaxy Note 20 Ultra 5G firmware SM-N9860 from Hong Kong with N9860ZSU1BTK3 and Android version 10
www.sammobile.com
Also: Since it's the same region... I dont need to worry about knox, right? Stock firmware from the same region wont trigger it? And what about OTA Updates? I think when I just go ahead and flash the HL rom by using:
BL
AP
CS
CSC HOME TO SAVE DATE
... OTA updates will stop in future right?
Sorry for those questions...in past I never cared about those 2 but this timeI kinda do ^^
I'm using a Hong Kong N9860 TGY in the UK. Mostly everything works as one would hope, except...
Samsung Pay is no good (needs a Hong Kong bank card), but Google Pay is fine.
5G only works on some networks, but not all.
Firmware updates are running a bit behind. Despite an update in December the phone only has November security updates so far.
But that seems about it.
tdodd said:
I'm using a Hong Kong N9860 TGY in the UK. Mostly everything works as one would hope, except...
Samsung Pay is no good (needs a Hong Kong bank card), but Google Pay is fine.
5G only works on some networks, but not all.
Firmware updates are running a bit behind. Despite an update in December the phone only has November security updates so far.
But that seems about it.
Click to expand...
Click to collapse
Sounds good to me!
in regard of my previous message... how did you flash the HK rom? did you manage to keep OTA updates and knox?
cmg15326 said:
Sounds good to me!
in regard of my previous message... how did you flash the HK rom? did you manage to keep OTA updates and knox?
Click to expand...
Click to collapse
I haven't flashed anything. I'm using the stock Hong Kong TGY ROM that came with the phone and I've had a few OTA updates since receiving the phone in early October.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tdodd said:
I haven't flashed anything. I'm using the stock Hong Kong TGY ROM that came with the phone and I've had a few OTA updates since receiving the phone in early October.
Click to expand...
Click to collapse
dang! okay so I will wait for the reply of ekerbuddyeker ... hoping that he needed to flash it
seems I simply wasnt lucky to get this ROM from start
BUT I start getting the feeling that I overcomplicate things in this case.
Before I always used CFW + Root on my phones when I used odin. I never simply flashed another Stock ROM... And it seems when you flash a Stock ROM from the same region your phone is currently in:
1. you wont trigger knox
2. you will keep the OTA updates
since Stock ROMs don't break those?
cmg15326 said:
dang! okay so I will wait for the reply of ekerbuddyeker ... hoping that he needed to flash it
seems I simply wasnt lucky to get this ROM from start
Click to expand...
Click to collapse
Do you need to flash a new ROM at all, or simply change CSC?
Oh, and I don't think it would be wise to flash a US ROM onto a Chinese model, especially for use in Europe/Germany.
tdodd said:
Do you need to flash a new ROM at all, or simply change CSC?
Click to expand...
Click to collapse
To be honest... even if I rooted my phones years ago... I never heared about CSC before that guide I saw today. I'm not so sure if it would work for this as well.
Cause in the guide it seems to be critical to not connect to the internet after the ROM is flashed / fresh installed.
and I guess since the Playstore is somehow totally messed up on my device flashing the HK rom kinda feels "cleaner"?
My only concern right now besides OTA and Knox would be that everything is in chinese once I flashed the ROM haha
What is the csc of your phone? My phone is BRI & its from Taiwan & everything is working just fine.
RISHI RAJ said:
What is the csc of your phone? My phone is BRI & its from Taiwan & everything is working just fine.
Click to expand...
Click to collapse
CHC? at least I think so
Greetings to all!
My friend ordered the same phone from same seller just to have the Snapdragon version and he is really fed up! So what you guys suggest him to do?His baseband is N9860ZCU1CUA2.What about HK firmware?Does it also have Chinese craps?His phone is full of Chinese apps,notifications etc without playstore.(When phone updated to Android 11)Any help would be really appreciated.
cmg15326 said:
Oh! So you say there is a ROM from the same Region with all the google apps?
Your talking about that one?
Download Samsung Galaxy Note 20 Ultra 5G SM-N9860 TGY Hong Kong N9860ZSU1BTK3 firmware
Fast download latest Samsung Galaxy Note 20 Ultra 5G firmware SM-N9860 from Hong Kong with N9860ZSU1BTK3 and Android version 10
www.sammobile.com
Also: Since it's the same region... I dont need to worry about knox, right? Stock firmware from the same region wont trigger it? And what about OTA Updates? I think when I just go ahead and flash the HL rom by using:
BL
AP
CS
CSC HOME TO SAVE DATE
... OTA updates will stop in future right?
Sorry for those questions...in past I never cared about those 2 but this timeI kinda do ^^
Click to expand...
Click to collapse
kos25k said:
Greetings to all!
My friend ordered the same phone from same seller just to have the Snapdragon version and he is really fed up! So what you guys suggest him to do?His baseband is N9860ZCU1CUA2.What about HK firmware?Does it also have Chinese craps?His phone is full of Chinese apps,notifications etc without playstore.(When phone updated to Android 11)Any help would be really appreciated.
Click to expand...
Click to collapse
Just flash the latest full TGY ROM Bro. But use the other CSC not "HOME CSC". Factory reset is required in this case as your phone will change ROM and CSC.
You can download full TGY ROM fast using FRIJA
tribalfs said:
Just flash the latest full TGY ROM Bro. But use the other CSC not "HOME CSC". Factory reset is required in this case as your phone will change ROM and CSC.
You can download full TGY ROM fast using FRIJA
Click to expand...
Click to collapse
Ohh thanks!The other csc will be included in this program?Also from which region is this firmware?
Hey dudes,sorry for bothering again.So my only solution is to flash Hong Kong rom?If i flash some European rom i will brick it?
kos25k said:
Hey dudes,sorry for bothering again.So my only solution is to flash Hong Kong rom?If i flash some European rom i will brick it?
Click to expand...
Click to collapse
Yes you will brick your phone
manager77 said:
Yes you will brick your phone
Click to expand...
Click to collapse
Thanks a lot dude.
Please someone help!We are ready to install hong kong firmware.Which csc file to choose?the one that has the phone,or my countrie one??
Always odin says stucks here and then says fail.I checked dev. options and bl unlock inside phone.Any idea? I used TGY Android 11 firmware.
tdodd said:
I'm using a Hong Kong N9860 TGY in the UK. Mostly everything works as one would hope, except...
Samsung Pay is no good (needs a Hong Kong bank card), but Google Pay is fine.
5G only works on some networks, but not all.
Firmware updates are running a bit behind. Despite an update in December the phone only has November security updates so far.
But that seems about it.
Click to expand...
Click to collapse
That's weird, samsung pay works perfect for me in Europe, Hong Kong model TGY.

Question S21+ no updates since June

I bought this s21+ G996B Exynos from a local shop.
Since I bought this phone I don't remember that there was a single update available for it.
See the screenshots for details.
Can any one tell which country CSC is this in screenshots. I can't seem to identify it.
I am looking to upgrade to Android 12 and not interested in root (but if its the only way to go to android 12 then I guess its ok)
Should I change CSC ? Will that enable updates for me. Is there a a process for S21+
Any other way to upgrade?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tried Frija to download any updates but it says no updates found.
Rule #1 if the firmware is fast, stable and fulfilling its mission... let it be.
Upgrades can and do break things.
There are many reported issues with 12.
Security simply isn't a major issue with Android 9 and up.
You can always update latter if you want or need to...
AhmedRana said:
I bought this s21+ G996B Exynos from a local shop.
Since I bought this phone I don't remember that there was a single update available for it.
See the screenshots for details.
Can any one tell which country CSC is this in screenshots. I can't seem to identify it.
I am looking to upgrade to Android 12 and not interested in root (but if its the only way to go to android 12 then I guess its ok)
Should I change CSC ? Will that enable updates for me. Is there a a process for S21+
Any other way to upgrade?
Tried Frija to download any updates but it says no updates found.
Click to expand...
Click to collapse
Hi
Those CSC that you show are really strange , I could not find out what WWD is from and XAA ( least important one) is from USA??
What would I do? ....change your active CSC (WWD) , if you are not rooted , try this first , if that do not work you will have to pay for the service (SamKey) , change your active CSC to Pakistan (PAK) for example , or any other country you choose ang get regular updates
Pakistan had several already since june , check here
MAX 404 said:
Hi
Those CSC that you show are really strange , I could not find out what WWD is from and XAA ( least important one) is from USA??
What would I do? ....change your active CSC (WWD) , if you are not rooted , try this first , if that do not work you will have to pay for the service (SamKey) , change your active CSC to Pakistan (PAK) for example , or any other country you choose ang get regular updates
Pakistan had several already since june , check here
Click to expand...
Click to collapse
Thanks for the reply.
Which region is better considering
1. I have an samsung active 2 watch and I would like to use its BP and ECG features. On watch I had changed the CSC to korean and features are available on it but not on the mobile at the moment.
2. Will a BTU firmware https://samfw.com/firmware/SM-G996B/BTU/G996BXXU4BULF work on my device
3. If I change the CSC only will the updates start working on right away?
AhmedRana said:
Thanks for the reply.
Which region is better considering
1. I have an samsung active 2 watch and I would like to use its BP and ECG features. On watch I had changed the CSC to korean and features are available on it but not on the mobile at the moment.
2. Will a BTU firmware https://samfw.com/firmware/SM-G996B/BTU/G996BXXU4BULF work on my device
3. If I change the CSC only will the updates start working on right away?
Click to expand...
Click to collapse
Hi
Which region is better? i guess everyone has an opinion , myself any of the multi csc OXM
Regarding your questions
1 no idea
2 if a saw correctly you have a G-996B , it should work fine , BTU is a good choice
3 Yes it should , watch out , when you change the CSC you will factory reset the phone
If you use the dialer method , the CSC of choice has to be present in the rom installed in the phone , I can see you have an OXM so it should , if not , then you should flash an OXM first and the change to the desire CSC
With Samkey they recommend to flash the correct rom after changing the CSC
Backup before you do anything
MAX 404 said:
Hi
Which region is better? i guess everyone has an opinion , myself any of the multi csc OXM
Regarding your questions
1 no idea
2 if a saw correctly you have a G-996B , it should work fine , BTU is a good choice
3 Yes it should , watch out , when you change the CSC you will factory reset the phone
If you use the dialer method , the CSC of choice has to be present in the rom installed in the phone , I can see you have an OXM so it should , if not , then you should flash an OXM first and the change to the desire CSC
With Samkey they recommend to flash the correct rom after changing the CSC
Backup before you do anything
Click to expand...
Click to collapse
Hi
I finally flashed the firmware from https://samfw.com/firmware/SM-G996B/BTU/G996BXXU3AUE1
Still my CSC is showing WWD and still no updates.
AhmedRana said:
Hi
I finally flashed the firmware from https://samfw.com/firmware/SM-G996B/BTU/G996BXXU3AUE1
Still my CSC is showing WWD and still no updates.
Click to expand...
Click to collapse
Flashing firmware does no longer change CSC. If the dailer codes don't work you have to use paid Samkey service. I did and it works perfectly fine. Changed from TNL (T-Mobile branded) to VDF (Vodafone branded) and have full VoLTE/WiFi/Other carrier apps functionality including OTA updates now through Vodafone.
AhmedRana said:
Hi
I finally flashed the firmware from https://samfw.com/firmware/SM-G996B/BTU/G996BXXU3AUE1
Still my CSC is showing WWD and still no updates.
Click to expand...
Click to collapse
Imprezzion said:
Flashing firmware does no longer change CSC. If the dailer codes don't work you have to use paid Samkey service. I did and it works perfectly fine. Changed from TNL (T-Mobile branded) to VDF (Vodafone branded) and have full VoLTE/WiFi/Other carrier apps functionality including OTA updates now through Vodafone.
Click to expand...
Click to collapse
Hi
As I mentioned before , if the dialer method does not work , you have to paid to change your active CSC
I was finally able to change the CSC to XID (Indonesia). That is the only one which got changed. Flashing any other didnt change the CSC. I used the following tutorial
AhmedRana said:
I was finally able to change the CSC to XID (Indonesia). That is the only one which got changed. Flashing any other didnt change the CSC. I used the following tutorial
Click to expand...
Click to collapse
Glad you finally got your CSC changed
MAX 404 said:
Glad you finally got your CSC changed
Click to expand...
Click to collapse
Thanks. Finally I can get normal OTA updates

Question S22 Ultra csc change

Hi. I bought my S22 Ultra in Poland, I live in UK. Samsung pay refuse to work as the phone is from Poland.
It is on OXM firmware with EUX CSC.
I want to set the region csc for UK.
I read that Samkey does not support CSC change for S22 Ultra with June patch.
Any other way to do it?
Maybe this
Samsung Pay in german, CSC is EUX fix, 5 minutes
Hello This also works with most Samsung phones If anyone is struggling with Samsung pay being in German and has the csc being EUX, I know how to solve the issue and it only takes about 5 minutes. Basically the csc is set to EUX, which is the new European standard, but for some reason, Samsung...
eu.community.samsung.com
It worked!!! Thanks. That method should be pinned.
WOW THANKS, IT WORKED LIKE A CHARM!
<3 <3 <3
raul6 said:
Maybe this
Samsung Pay in german, CSC is EUX fix, 5 minutes
Hello This also works with most Samsung phones If anyone is struggling with Samsung pay being in German and has the csc being EUX, I know how to solve the issue and it only takes about 5 minutes. Basically the csc is set to EUX, which is the new European standard, but for some reason, Samsung...
eu.community.samsung.com
Click to expand...
Click to collapse
i tried but there is no option in activities
click on activities and scroll down too configuration update com.samsung.android.app.omcagent.test.ui.QATestActivity and open
no scroll down option
Pichulec said:
Hi. I bought my S22 Ultra in Poland, I live in UK. Samsung pay refuse to work as the phone is from Poland.
It is on OXM firmware with EUX CSC.
I want to set the region csc for UK.
I read that Samkey does not support CSC change for S22 Ultra with June patch.
Any other way to do it?
Click to expand...
Click to collapse
Samkey have support, i change csc yesterday, and it work
PeterParker said:
Samkey have support, i change csc yesterday, and it work
Click to expand...
Click to collapse
No point paying for something i can have for free. Also, i dont have any problems with OTA like some people after using SAMKEY
PeterParker said:
Samkey have support, i change csc yesterday, and it work
Click to expand...
Click to collapse
i tried but couldn't change it , how did you do it ?
SamFw Tool 4.7.1 - Remove Samsung FRP one click
Hi Today, we introducing SamFw FRP Tool version 4.7.1 Main function: Remove FRP with one click Change CSC with one click Remove FRP for new se...
samfw.com
Change CSC for free!
I want to change my CSC of S 22 Ultra, i bought from Australia SM-S908EDRFATS to India SM-S908EZKP, i see both are S908E models.
Please guide me thanks in advance
You have all info here:
SD Native call recording & CSC (without rooting)
Hi everyone, Looking for some insight and more educated projections. I'm in Canada, and our phones (SD) typically didn't get native call recording (or any recording allowed as a matter of fact after Pie was rolled out). I had to purchase a...
forum.xda-developers.com
Pichulec said:
No point paying fors something i can have for free. Also, i dont have any problems with OTA like some people after using SAMKEY
Click to expand...
Click to collapse
do you seriously still receive OTA's with changed CSC? that cant be possible..
Neeko72 said:
do you seriously still receive OTA's with changed CSC? that cant be possible..
Click to expand...
Click to collapse
Well. It is possible as I am receiving ota updates. Unfortunately this method no longer works as knox key has been revoked for the Aliance Shield..
amitdon said:
I want to change my CSC of S 22 Ultra, i bought from Australia SM-S908EDRFATS to India SM-S908EZKP, i see both are S908E models.
Please guide me thanks in advance
Click to expand...
Click to collapse
Totally works with suggested samfirm tool 3.31 I'm Australian an changed from XSA to INS I now have call recording faster OTA firmware updates and nothing not working it's a very simple process using that software and costs nothing.
Neeko72 said:
do you seriously still receive OTA's with changed CSC? that cant be possible..
Click to expand...
Click to collapse
Yes I got India update yesterday and my phone is Australian model who always got late updates OTA works perfectly with samfirm tool after csc change I'll prove it Check the photos
Pichulec said:
Well. It is possible as I am receiving ota updates. Unfortunately this method no longer works as knox key has been revoked for the Aliance Shield..
Click to expand...
Click to collapse
There is a fix for that but you have to downgrade to android 12 first them install alliance using their instructions on their discord then you can update to latest firmware and it still works
Hi all. I change my CSC with the help of this video very easy
Change csc

Categories

Resources