{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YahsxOS
For Galaxy J6
First note:
I will not accept any inquiries if you flash it on another device and brick it
I'm not responsible for bricked devices, dead SD cards, broken alarm, or your being stuck on TWRP/Ofox OS forever.
YOU chose to make the modifications, and if you point the finger at me for messing up your device, I will laugh and ignore.
Supported devices:
Galaxy J6
How to install:
• Strongly recommended to MAKE BACKUP in RECOVERY.
• Boot in to recovery.
• Wipe System, Vendor, Data and both Caches.
• Flash YashxOS ROM.
• Be Patient while flashing cause it can take a while.
• If it boots in to download mode try to flash it agian
• After Flashing succeed, simply reboot.
• Enjoy the ROM!
Download:
Google Drive
Changelog:
Nothing
Working things:
Wifi
Bluetooth
Audio (Speaker and Microfone)
Camera (Video and Picture)
Flashlight
SMS
SIM Calls
Mobile Data
Non-working things:
Wifi Router
Notes:
The ROM is tested on J600FN , J600G rest of the devices are unknown to boot so try it at your own risk.
Screenshots:
2 Post
Based:
Android Ver:10
Kernel source: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870
One UI 2.0
Credits:
Me
Website:
Website
Screen shots.
Wow amazing Nice Projact bro... i tery.....
This is not arm64 but arm only or 32bit
riyanpacitan2 said:
This is not arm64 but arm only or 32bitView attachment 5748383
Click to expand...
Click to collapse
oh sorry i was thinking it was arm64 i will change it
Volte supported or not?
I am unable to give access to the free fire of files and storage...please help
Your browser is not able to display this video.
just go in settings and selcet the app and give the premisons
YashxOS said:
just go in settings and selcet the app and give the premisons
Click to expand...
Click to collapse
When i go to settings and select the app to give permissions only microphone option is available in permissions data and storage option is missing idk why
KARTIK KUMAR77 said:
When i go to settings and select the app to give permissions only microphone option is available in permissions data and storage option is missing idk why
Click to expand...
Click to collapse
idk why
Hello,
thanks for your ROM all seems OK on my SM-J600FN/DS :+)
But, is it possible to have without the Gapps?
And also, how root this phone? Kingoroot.apk 4.8 freezes...
PS: nevertheless, strange in settings
Version Android is at 24
Version provider shows ...SM-G965F...
kalagani said:
Hello,
thanks for your ROM all seems OK on my SM-J600FN/DS :+)
But, is it possible to have without the Gapps?
And also, how root this phone? Kingoroot.apk 4.8 freezes...
PS: nevertheless, strange in settings
Version Android is at 24
Version provider shows ...SM-G965F...
Click to expand...
Click to collapse
oh thats my mistake and to root you need to do it with magisk
i will try to delete google services
Hello David,
YashxOS said:
oh thats my mistake and to root you need to do it with magisk
i will try to delete google services
Click to expand...
Click to collapse
I do not arrive to install Magisk, so I am waiting for your version without Gapps, thanks in advance for it!
About mistake, I can't tell at startup if the message
"An internal problem with your device has
occurred. Please contact the manufacturer
for more information."
is really an error or forgetfulness, because after validation by OK, everything seems normal...
kalagani said:
Hello David,
I do not arrive to install Magisk, so I am waiting for your version without Gapps, thanks in advance for it!
About mistake, I can't tell at startup if the message
"An internal problem with your device has
occurred. Please contact the manufacturer
for more information."
is really an error or forgetfulness, because after validation by OK, everything seems normal...
Click to expand...
Click to collapse
yeah that normal
Hello David,
YashxOS said:
yeah that normal
Click to expand...
Click to collapse
I think you mean about the message at each startup.
This phone is for a friend, so it might confuse her,
really no way to avoid this message?
kalagani said:
Hello David,
I think you mean about the message at each startup.
This phone is for a friend, so it might confuse her,
really no way to avoid this message?
Click to expand...
Click to collapse
yeah the problem can be in twrp, try to flash using orangefox
the pop up is a known problem but don't worry, it doesn't affect at all the experience. gcam doesn't works as this rom is a64, gcam works only on arm64 roms
YashxOS said:
yeah the problem can be in twrp, try to flash using orangefox
the pop up is a known problem but don't worry, it doesn't affect at all the experience. gcam doesn't works as this rom is a64, gcam works only on arm64 roms
Click to expand...
Click to collapse
To install/flah your ROM, I used the sideload function from orangeFox not TWRP!
YashxOS said:
View attachment 5745943YahsxOS
For Galaxy J6
First note:
I will not accept any inquiries if you flash it on another device and brick it
I'm not responsible for bricked devices, dead SD cards, broken alarm, or your being stuck on TWRP/Ofox OS forever.
YOU chose to make the modifications, and if you point the finger at me for messing up your device, I will laugh and ignore.
Supported devices:
Galaxy J6
How to install:
• Strongly recommended to MAKE BACKUP in RECOVERY.
• Boot in to recovery.
• Wipe System, Vendor, Data and both Caches.
• Flash YashxOS ROM.
• Be Patient while flashing cause it can take a while.
• If it boots in to download mode try to flash it agian
• After Flashing succeed, simply reboot.
• Enjoy the ROM!
Download:
Google Drive
Changelog:
Nothing
Working things:
Wifi
Bluetooth
Audio (Speaker and Microfone)
Camera (Video and Picture)
Flashlight
SMS
SIM Calls
Mobile Data
Non-working things:
Wifi Router
Notes:
The ROM is tested on J600FN, rest of the devices are unknown to boot so try it at your own risk.
Screenshots:
2 Post
Based:
Android Ver:10
Kernel source: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870
One UI 2.0
Credits:
Me
Website:
Website
Click to expand...
Click to collapse
How can I root the latest devices.
ascetic4ashine said:
How can I root the latest devices.
Click to expand...
Click to collapse
magisk
Related
THIS IS AN OS WHICH I AM USING FOR DAILY USES AND NOW I AM SHARING WITH YOU GUYS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
" #DroidOnTime "
Code:
/*
*
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
*
*/
Stability and Performance
Lagfree with High Performance Results
Clutterless UI
Perfect Interface for every User
Enhanced default apps
Redesigned settings and QS panel
Full OMS support
Colour Engine Support
DotExtras !!
CLEAN FLASH :
USE TWRP TO FLASH
Download the latest build and GApps
Reboot to recovery
Make TWRP backup (EFS and MODEM partaion Necessary if SIM not Detected)
Wipe System, Data, Cache , Dalvik
Flash the latest build and GApps
Reboot
DIRTY FLASH :
Download the latest build
Reboot to recovery
Flash the latest build
Wipe Cache
Reboot
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update) as long as the instructions of your
root solution do not state something else (="persistence on dirty flashing") !
Download ROM:http://www.mediafire.com/file/rn4e6jj13343to5/DOT-N-v1.2-20180411-n7100-UNOFFICIAL.zip
Download Gapps:
Note : Pico or Nano Gapps are recommended. We Don't prefer STOCK/HEAVY Gapps
OpenGApps
DO NOT EDIT OR MODIFY THIS ROMThank you. Hope you like it until I develop an oreo ROM.
XDA:DevDB Information
[ROM][7.1.2_r29] dotOS-v1.2 [N7100][28-12-2074], ROM for the Samsung Galaxy Note II
Contributors
santosh61
Source Code: https://github.com/DotOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: LOS
Version Information
Status: Nightly
Created 2018-04-11
Last Updated 2018-04-11
Screenshots:
Downloading, will try it now
Upd. Flashed it abd the speed of system, animations is so incredible! I can just say one thing "WOW" ! nice work Santosh:victory:
Awesome work! @santosh61
Fantastic bro @santosh61, will download it and give you my feedback, and waiting for oreo, good luck dude
Keep going ??
Nice work !! @santosh61
Any bugs we have to know?
Standard nougat ones?
I got first problem with systemUI. Attached logcat. :silly:
Deleted
Downloading now. I hope this will last rom I will install
Me too got a bug.
I added extra tiles in qs.But now i cannot.When i press plus button on top or qs,the systemui crashes and restart it to lockscreen.
Everything except that works well.
hishamnoobie said:
Me too got a bug.
I added extra tiles in qs.But now i cannot.When i press plus button on top or qs,the systemui crashes and restart it to lockscreen.
Everything except that works well.
Click to expand...
Click to collapse
Yes same with me.
hishamnoobie said:
Me too got a bug.
I added extra tiles in qs.But now i cannot.When i press plus button on top or qs,the systemui crashes and restart it to lockscreen.
Everything except that works well.
Click to expand...
Click to collapse
Dxnxsh said:
Yes same with me.
Click to expand...
Click to collapse
Same here guys. I attached logcat file on previous page.
what root method have you used? Also, pico or Nano Gapps? Are you all(having qt problem) on magisk?
Hi
pls can help me I lost the( Not Registered On Network) when install this the Rom
AL-Hasani said:
Hi
pls can help me I lost the( Not Registered On Network) when install this the Rom
Click to expand...
Click to collapse
if you look in the OP (first post made by the developer) you will see this:
'''Make TWRP backup (EFS and MODEM partition Necessary if SIM not Detected)''
what does it mean?
Have you made a EFS and Modem backup with TWRP before flash the rom?
Then reboot to recovery and flash the back up back , because your EFS and Modem partition has been corrupted and you cannt be registerd to your mobile network.
if you dont have a EFS and Modem back up, the only way(s) I know to restore that are:
1. Reflash a known working rom that you previous had in your phone
after flash rom reboot in recovery and see if then you can take back your EFS and modem.
IF YOU DO, then your problem is solved. But if NOT,
2. FLASH STOCK ROM with odin, let it boot once and see if your sim card is recognized and you can registered to your network. If yes, flash TWRP with odin again.
Reboot in recovery, BACKUP your EFS and Modem partition, save it in 2-3 positions (ext sdcard, PC, cloud) and then continiue your custom rom flashing.
If in any of these need some help, just ask for more details
GOOD LUCK my friend
logosA said:
what root method have you used? Also, pico or Nano Gapps? Are you all(having qt problem) on magisk?
Click to expand...
Click to collapse
I'm using lineage su add-on.
nNeFeroN said:
I'm using lineage su add-on.
Click to expand...
Click to collapse
kernel? Stock? or something else?
I am on Hybrid Boeffla v9.8
logosA said:
kernel? Stock? or something else?
I am on Hybrid Boeffla v9.8
Click to expand...
Click to collapse
Everything is stock. Nothing has been change in system except installing su add-on.
I reflashed ROM, everything worked. But after few hours QS tiles settings started to crash again.
Maybe it is lineaguSu?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I AM NOT CURRENTLY UPDATING THIS ROM
Evolution X 6.2.2 for the Xiaomi K20 / Xiaomi Mi 9T [davinci]
Code:
/*
* Your warranty is void. Or valId, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modifications, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
Keep Evolving
Pixel UI, customization, and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@RealAkito
@AnierinB
Reach us on Twitter! @EvolutionXROM
Just flash and check "The Evolver". We have tons of features combined together from different ROMs.
Even though these builds are unofficial, they do have OTA updates.
DO NOT FLASH GAPPS, ALREADY INCLUDED
First Time Install / Clean Flash
1. Reboot to Recovery
2. Download the zip for your device
3. Flash whichever recovery you desire and Flash A11 firmware
4. Wipe Data/Cache/System
5. Flash the ROM
6. Reboot to System and #KeepEvolving
Update / Dirty Flash
1. Reboot to Recovery
2. Download the update for your device
3. Flash the ROM
4. Reboot to System and #KeepEvolving
Download
Device Support
Android OS version: 12.1.0_r2
Security patch level: March 2022
Build author: Marie
Source code: https://github.com/Evolution-X
Kernel Source code: https://github.com/ArianK16a/android_kernel_xiaomi_sm6150
ROM Developer: Joey Huab
stuck on bootloop
installed on Evo-X 5.9.3
Just flashed this ROM and now setting things up for the first start.
Depending from which ROM you com, it could be the installation process is different from stated in the OP.
1. Reboot to Recovery
2. Download the zip for your device
3. Flash whichever recovery you desire and Flash A11 firmware
4. Format Data (Format, not wipe)
5. Flash the ROM
6. Reboot to System
Audiowaste said:
Just flashed this ROM and now setting things up for the first start.
Depending from which ROM you com, it could be the installation process is different from stated in the OP.
1. Reboot to Recovery
2. Download the zip for your device
3. Flash whichever recovery you desire and Flash A11 firmware
4. Format Data (Format, not wipe)
5. Flash the ROM
6. Reboot to System
Click to expand...
Click to collapse
Can you share any Tutorial for that or do we need to change any Recovery Version or any else?
Fame69 said:
Can you share any Tutorial for that or do we need to change any Recovery Version or any else?
Click to expand...
Click to collapse
If you already got a custom recovery (TWRP for example) installed, you can skip this step.
1. Download the vendor file from here and the Evolution ROM from here.
2. Boot into TWRP Recovery.
3. Flash the vendor file.
4. Wipe cache and dalvik
5. Flash the Evolution ROM.
6. Format Data, be sure you format data and not just wipe.
7. Reboot to recovery.
The step to Format Data is necessary in some cases where you come from a different ROM which does have a different file system.
Audiowaste said:
If you already got a custom recovery (TWRP for example) installed, you can skip this step.
1. Download the vendor file from here and the Evolution ROM from here.
2. Boot into TWRP Recovery.
3. Flash the vendor file.
4. Wipe cache and dalvik
5. Flash the Evolution ROM.
6. Format Data, be sure you format data and not just wipe.
7. Reboot to recovery.
The step to Format Data is necessary in some cases where you come from a different ROM which does have a different file system.
Click to expand...
Click to collapse
Is front camera working? And thank you for the help is there any other way I can contact you directly like telegram or Instagram?
I want this A12 Badly but feom yesterday night I was fixing my bootlooping device and it's working fine On Evo-X 5.9.3 but front xamera not working
clean flash on your first install. i will release updates often for the first few weeks as more and more features are getting ported to android 12, and when i release those updates you should be able to dirty flash them will make a telegram channel that will notify when i update the rom, but whenever you download from the google drive link you will be downloading the latest version.
Fame69 said:
Is front camera working? And thank you for the help is there any other way I can contact you directly like telegram or Instagram?
I want this A12 Badly but feom yesterday night I was fixing my bootlooping device and it's working fine On Evo-X 5.9.3 but front xamera not working
Click to expand...
Click to collapse
join the telgram support group linked in the post and i can help you there. you probably just need to do a clean flash. only dirty flash if you are coming from my builds, and since this is the first one ive released you should only clean flash
The camera doesn't seem to work at all. Google Camera is installed as a system app and in the play store an update is available.
However when I try to install the update, it fails everytime. Also installing the apk fails everytime.
Audiowaste said:
The camera doesn't seem to work at all. Google Camera is installed as a system app and in the play store an update is available.
However when I try to install the update, it fails everytime. Also installing the apk fails everytime.
Click to expand...
Click to collapse
disable the google camera system app and install a modded version from here. most of them work but i find BSG to be the best. if you want an open source camera there are some on the play store and maybe on fdroid. i will try to include a working camera like snap cam on a future build.
After clean ROM, recovery and firmware flash, fingerprint unlock is not working, it's saying "Hold a little longer" even though I holding it all the time. Rest looks smooth and stable, SafetyNet, L1, all cameras (BSG version here) too.
Venode said:
After clean ROM, recovery and firmware flash, fingerprint unlock is not working, it's saying "Hold a little longer" even though I holding it all the time. Rest looks smooth and stable, SafetyNet, L1, all cameras (BSG version here) too.
Click to expand...
Click to collapse
bug on google's end. did you change the animation speed or the display colors? check in display settings that colors are set to boosted or natural, and check in developer settings that animation speeds are set to 1x
dgmarie0001 said:
bug on google's end. did you change the animation speed or the display colors? check in display settings that colors are set to boosted or natural, and check in developer settings that animation speeds are set to 1x
Click to expand...
Click to collapse
Setting back to "Boosted" colors solved issue, thanks!
very nice thanks
welcome to my MI9T I have xiaomi.eu 21/11/03 what do I have to do to upload this rom thank you.
przemek74 said:
MI9T'me hoşgeldiniz, bende xiaomi.eu var 21/11/03 Bu romu yüklemek için ne yapmalıyım teşekkür ederim.
Click to expand...
Click to collapse
clean install it will work fine
I've been using it for 5 days no problem.
Murad Ali said:
I've been using it for 5 days no problem.
Click to expand...
Click to collapse
Hey buddy, I got some questions about this ROM, can you help me?
1- Cameras, are both working OK?
2- Fingerprint, does it work with screen off?
3- Features, does it have "lift to wake" and "long press on volume buttons to switch music tracks"?
Thanks!
Tuandroidaldia said:
Hey buddy, I got some questions about this ROM, can you help me?
1- Cameras, are both working OK?
2- Fingerprint, does it work with screen off?
3- Features, does it have "lift to wake" and "long press on volume buttons to switch music tracks"?
Thanks
Click to expand...
Click to collapse
It all works!
I'm very pleased with this ROM. Thank you!
I came from ArrowOS 11.0 and did a dirty flash; without wiping cache/dalvik. I installed ArrowOS with Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip and did that again on this Rom. The only thing I would like is to get rid off that horizontal line at the bottom of the screen. You can see it at the picture. Anyone an idea? Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SparkOS is an AOSP based ROM, packed with many features without sacrificing stability and performance.
In short a fully functional operating system as stable and customizable as it should be.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Device Specific Issues:
• eSIM issues with some carriers
* FaceUnlock doesn't work yet
Requirements
• baseband and bootloader from November stock firmware
Downloads
SparkOS Build for cheetah: Spark-13.2-BETA2-Cheetah-11292022_fastboot.zip
Magisk (optional): Magisk.apk
Note: GApps are included, don't flash separately.
Notes
• Nothing yet...
Flashing Instructions
Clean flash (coming from a different ROM):
* download zip and place in same folder in fastboot.exe
* open command prompt inside same folder
* reboot phone to bootloader (adb reboot bootloader)
* fastboot -w update <rom.zip>
Updating to a newer build (dirty flash):
* download zip and place in same folder in fastboot.exe
* open command prompt inside same folder
* reboot phone to bootloader (adb reboot bootloader)
* fastboot update <rom.zip>
Join our Telegram Group PANTAH ROMs (Pixel 7/Pro)
Buy me a Coffee Donate to Albinoman887
Source Code
https://github.com/Spark-Rom
https://github.com/Albinoman887/android_device_google_gs201
https://github.com/Albinoman887/android_device_google_pantah
Reserved
Reserved 2
albinoman887 said:
Reserved 2
Click to expand...
Click to collapse
Thx for ur hard work.... already installed....
asre the 5G and volte working in unsupported countires or only with root?
Thanks man, this is the freaky ultimate ROM!
Everything seems to be working great other than my fingerprint reader. It says "Couldn't process fingerprint. Please try again later." Is anyone else having this issue? Had the same issue on PA but it works perfectly on stock.
Manalow88 said:
Everything seems to be working great other than my fingerprint reader. It says "Couldn't process fingerprint. Please try again later." Is anyone else having this issue? Had the same issue on PA but it works perfectly on stock. View attachment 5775275
Click to expand...
Click to collapse
Fingerprint works perfectly fine on both Spark and PA.
Manalow88 said:
Everything seems to be working great other than my fingerprint reader. It says "Couldn't process fingerprint. Please try again later." Is anyone else having this issue? Had the same issue on PA but it works perfectly on stock. View attachment 5775275
Click to expand...
Click to collapse
Try to be sure you have correct STOCK before, so flash stock to A, flash stock to B(boh novmeber), then boot one of them, reboot to recovery, wipe data, boot to BL, fastboot update spark......zip and try again to add FP.
oh, you tried to register FP in 1080p or 1440p display settings?
You need to set 1440p.
vlubosh said:
Try to be sure you have correct STOCK before, so flash stock to A, flash stock to B(boh novmeber), then boot one of them, reboot to recovery, wipe data, boot to BL, fastboot update spark......zip and try again to add FP.
oh, you tried to register FP in 1080p or 1440p display settings?
Click to expand...
Click to collapse
I've tried setting in in both. I did not flash stock to both a and b nor did I flash spark to both. Could that be my issue?
Manalow88 said:
I've tried setting in in both. I did not flash stock to both a and b nor did I flash spark to both. Could that be my issue?
Click to expand...
Click to collapse
just flash stock to both, and then flash spark to just one slot, but format data before flashing spark
Hello, Rom Install with success without any problems, root without any problems, thank you for your work and your sharing.
edit: @albinoman887 Small donation given for your work.
Loved Spark on my OP8. Nice to see it on Pixels. Any plans on bringing it to panther?
stompysan said:
Loved Spark on my OP8. Nice to see it on Pixels. Any plans on bringing it to panther?
Click to expand...
Click to collapse
it already exists : https://mega.nz/file/GwZ2HC4R#-eejENxgasBpHPE7AWaV61VXGwlDfjvEN1kHRL2LQWk
jejemc said:
it already exists : https://mega.nz/file/GwZ2HC4R#-eejENxgasBpHPE7AWaV61VXGwlDfjvEN1kHRL2LQWk
Click to expand...
Click to collapse
Yeah, I checked everywhere shortly after making this post. I should learn to look before immediately asking silly questions. Thanks for the link!
For some reason when i try to install it will not boot into fastbootd? It goes into a bootlop. What would cause this. i have both slots flashed with stock.
rlivin said:
For some reason when i try to install it will not boot into fastbootd? It goes into a bootlop. What would cause this. i have both slots flashed with stock.
Click to expand...
Click to collapse
Try different cables (suggest A to C) and ports (suggest USB 2.0).
Also make sure your Platform Tools are up-to-date.
Nice rom. Perfect. Thanks from Vietnam
trungpda93 said:
Nice rom. Perfect. Thanks from Vietnam
Click to expand...
Click to collapse
Hi
How is the battery life?
ON screen hours?
Greattings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
* Your warranty is now void.
* I am not responsible for anything that may happen to your phone by installing
any custom ROMs and/or kernels. (Bricked devices, dead SD cards,
thermonuclear war, Seal mad or you are getting fired because the alarm app
failed…)
* YOU are choosing to make these modifications, and you do it at your own risk.
if you point the finger at me or anyone else for messing up your device, you haven't
done what we told you to do.
* Please do research if you have any concerns about features included in your ROM
What is this?
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today.
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camera
Bluetooth
Fingerprint reader
Face unlock
NFC
Lights
Sound / vibration
Known issues
You tell meInstructions
Flash recovery via fastboot
Boot to recovery (Vol UP + Power)
Format Data (backup sdcard before format) if MIUI was previously installed
Flash ROM via adb sideload
Optional: Flash Gapps (MindTheGapps-13.0.0-arm64 is recommended) via adb sideload
Reboot
Downloads
Builds: https://sourceforge.net/projects/crdroid-xiaomi-9-se/files/crdroid-9/
Sources
https://github.com/Rocky7842/android_kernel_xiaomi_sdm710/tree/lineage-20/
Contributors
Rocky7842
LineageOS official maintainers for maintaining the trees for lineage.
crDroid Android team
Reserved
Does this support dynamic partition layout?
Yazedzeinab said:
Does this support dynamic partition layout?
Click to expand...
Click to collapse
No, it does not use dynamic partition, which I personally don't like to use either.
Why is it hated among devs?
And do you know any rom that support it?
Yazedzeinab said:
Why is it hated among devs?
And do you know any rom that support it?
Click to expand...
Click to collapse
If I recalled correctly, official lineage for grus does use dynamic partition.
New build uploaded. Some bugs fix and translation update, from source (crDroid).
Most importantly, OTA support was introduced. From now on, we can check for updates in settings app and will receive OTA updates when there's a future release.
Thanks for the rom. No issues, all good here and work fine.
A question about installation process. That's the first Rom I flashed since 1,5years on grus.
Is it related to A13, that Roms have to be flashed using adb connection? Just flashing in TWRP as (it was) usual doesn't work anymore on that phone?
fgh11 said:
Thanks for the rom. No issues, all good here and work fine.
A question about installation process. That's the first Rom I flashed since 1,5years on grus.
Is it related to A13, that Roms have to be flashed using adb connection? Just flashing in TWRP as (it was) usual doesn't work anymore on that phone?
Click to expand...
Click to collapse
I think you can still use TWRP if you want.
Rocky7842 said:
I think you can still use TWRP if you want.
Click to expand...
Click to collapse
Thanks for your answer. I tried first the usual way with latest TWRP and got Error 1. Then I flashed via fastboot another one TWRP version and got the same Error 1. I also read in other threads what installation way they have and it's also adb fastboot. So I thought it's probably some specific A13 stuff.
fgh11 said:
Thanks for your answer. I tried first the usual way with latest TWRP and got Error 1. Then I flashed via fastboot another one TWRP version and got the same Error 1. I also read in other threads what installation way they have and it's also adb fastboot. So I thought it's probably some specific A13 stuff.
Click to expand...
Click to collapse
Edit: Do not use TWRP.
@Rocky7842 this rom have unlock the phone long pressing the fingerprint sensor feature ?
Thank you for your efforts !
prog19 said:
@Rocky7842 this rom have unlock the phone long pressing the fingerprint sensor feature ?
Thank you for your efforts !
Click to expand...
Click to collapse
Screen off UDFPS does work, just remember to enable it in crDroid settings.
I'm trying this ROM right now. The level of customization is awesome. It's nice to put more than 2 buttons on the quick settings menu. Face unlock works like a charm. Fingerprint with screen off works, just need to turn on AOD.
GPS is working. Bluetooth too. Thank you @Rocky7842 for this ROM. I was on MIUI 12.5 rooted. Did a back up of all my apps and data with swift backup and restored on CRdroid and all worked fine. My gcam is MGC_8.1.101_A9_GV2b_MGC
prog19 said:
I'm trying this ROM right now. The level of customization is awesome. It's nice to put more than 2 buttons on the quick settings menu. Face unlock works like a charm. Fingerprint with screen off works, just need to turn on AOD.
GPS is working. Bluetooth too. Thank you @Rocky7842 for this ROM. I was on MIUI 12.5 rooted. Did a back up of all my apps and data with swift backup and restored on CRdroid and all worked fine. My gcam is MGC_8.1.101_A9_GV2b_MGC
Click to expand...
Click to collapse
No, you don't need AOD.
Enable long press in gesture settings and enable screen off UDFPS in crDroid settings will do the job.
The entry is kinda duplicate now. Will see how I can improve it when I'm free.
Rocky7842 said:
No, you don't need AOD.
Enable long press in gesture settings and enable screen off UDFPS in crDroid settings will do the job.
The entry is kinda duplicate now. Will see how I can improve it when I'm free.
Click to expand...
Click to collapse
That did the job. Thank you. O could say that earlier it was not working with AOD off, but probably was something on my side.
Now it is working like you mentioned
Update: Been running for more than a week and everything works like it should. No random reboots, no SOD, no slowdowns and no bugs so far. Battery life is better than MIUI because deep sleep works like it should. On MIUI i had a bunch of wakelocks.
Rocky7842 said:
No, you don't need AOD.
Enable long press in gesture settings and enable screen off UDFPS in crDroid settings will do the job.
Click to expand...
Click to collapse
I enabled those and it still doesnt work for me.
givemerobot said:
I enabled those and it still doesnt work for me.
Click to expand...
Click to collapse
After some investigation, I think you also need to enable DT2W. Please try it out.
thank you so much for your efforts, your firmware has revived the phone) I look forward to updates) and will it be by air or will it also download?!
Kupidon71rus said:
thank you so much for your efforts, your firmware has revived the phone) I look forward to updates) and will it be by air or will it also download?!
Click to expand...
Click to collapse
Builds can always be manually downloaded in the link, or by OTA.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn
Flashing Instructions:
First time installation:
flash OrangeFox-R11.1_2_FBEv1-Unofficial-raphael.zip (you can use any recovery you want but the provided one gives you no problems doing OTA, you are warned)
reboot into recovery
in recovery - Format data
if you want to stay on EXT4 for the data partition do nothing and flash the rom, if you want your data partition to be in F2FS then go to 'manage partitions' click 'Data' then 'Change FS' then 'F2FS'
ROM (Download from here)
gapps (Download from here)
KernelSU - (Download from here)
move these to the root of your device
flash rom and gapps, reboot enjoy!
Update installation:
just update if your device asks for it
make sure to use a gapps package with a recovery/survival script
Sources:
ROM: https://github.com/crdroidandroid
Kernel: kernel url
Download:
ROM https://crdroid.net/raphael
Changelog: https://crdroid.net/raphael/9#changelog
Known issues:
Tell me
Visit official website @ crDroid.net
crDroid MI9T Pro Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
#
Screenshots ?
Is rom decrypted ?
credfa said:
Screenshots ?
Click to expand...
Click to collapse
check the website
T3sla said:
Is rom decrypted ?
Click to expand...
Click to collapse
no
firebird11 said:
no
Click to expand...
Click to collapse
So i installed yesterday twice, once with orangefox and once with the recovery provided here.Both times i had the same problem : Quick setting tiles had only 4 icons and the edit button was missing so couldn't add more.Also the search button from settings was missing.I don't know if i am the only one who faced this problem, any idea what went wrong?Thanks!
crDroid Updates
New crDroid update for MI9T Pro 🔖 Codename: raphael 📱 crDroid version: 9.0 📅 Build date: 20230103 ✅ MD5: 9CA6F8443B8F11AD269D7A571672398D 🧑💻 Maintainer: Hildo Boerboom
t.me
I'm having some issue wherein some apps just wouldn't start. They don't crash but it seems they just get force closed/killed immediately. I tried doing a MatLog but I'm not sure if the information is enough. I hope you can help solve the problem. Thank you!
Edit: Forgot to mention I only flashed Firmware, ROM, NikGApps, Magisk, and DFE
ClockUpEx said:
I'm having some issue wherein some apps just wouldn't start. They don't crash but it seems they just get force closed/killed immediately. I tried doing a MatLog but I'm not sure if the information is enough. I hope you can help solve the problem. Thank you!
Edit: Forgot to mention I only flashed Firmware, ROM, NikGApps, Magisk, and DFE
Click to expand...
Click to collapse
probably because your data partition is in f2fs, you need to format it to ext4 or wait for the next release
firebird11 said:
probably because your data partition is in f2fs, you need to format it to ext4 or wait for the next release
Click to expand...
Click to collapse
I'm on ext4. I reflashed everything I'll observe if it happens again. Seems like a problem with gms because after clearing data of Play Services, I can start those apps but it stops working again after some time.
Hi, Great ROM, but I found some issues:
- In Wallpapers and Styles section of settings there are many wallpaper palettes (in groups of 4 per page), but all palettes on one given page, when selected, look exactly the same as the first one (others are broken)
- Face Unlock activates on Screen On, even when set to "on swipe up"
- UDFS custom animations are misaligned
- Sometimes "UDFS when screen off" doesn't work even when it's enabled
- Clock in QS is cut off above size 22 dp
Hello everybody.
First of all congratulations for the work.
I have installed according to the guide ROM, NikGApps and DFE.
I have a problem, When I connect the device to the computer, the drive appears, but I can't access the internal memory.
Any ideas?
Thanks
I've been waiting a long time for the return of Crdroid! Thank you!
thecoolkid said:
Hi, Great ROM, but I found some issues:
- In Wallpapers and Styles section of settings there are many wallpaper palettes (in groups of 4 per page), but all palettes on one given page, when selected, look exactly the same as the first one (others are broken)
- Face Unlock activates on Screen On, even when set to "on swipe up"
- UDFS custom animations are misaligned
- Sometimes "UDFS when screen off" doesn't work even when it's enabled
- Clock in QS is cut off above size 22 dp
Click to expand...
Click to collapse
I have the same small problems, without a doubt once they fix that this will be my header rom, the amount of customization it has is incredible, also, I would like to have the option for the tiles to vibrate when touching them, after that, nothing more, all excellent, more optimization I suppose
@firebird11, very nice ROM. Great battery life. Using your build for 2 weeks now and didn't face any problems. Bedankt!
firebird11 said:
on your computer type - adb sideload crDroidAndroid-13.0-xxxxxxxx-v9.x.zip
Click to expand...
Click to collapse
This step doesnt seem to work with the latest(?) version. Tried it with the provided Orangerecovery.
"adb sideload cannot read"
Settler11 said:
This step doesnt seem to work with the latest(?) version. Tried it with the provided Orangerecovery.
"adb sideload cannot read"
Click to expand...
Click to collapse
First you have to enable adb side load in recovery and swipe to activate before running the command in computer
asripath said:
First you have to enable adb side load in recovery and swipe to activate before running the command in computer
Click to expand...
Click to collapse
Thanks, but I know how to sideload... I'm not asking, but saying that sideloading doesn't work with newer builds. I've tested it with the first build and that worked right away.
Hello everyone, one question, does the rom have any important errors? I'm thinking of installing it but it's a headache to configure everything and copy my files and I wanted to ask those who have the rom installed
It would be nice if they updated the information here so that many of us are better informed than by Telegram
Thanks